Documente Academic
Documente Profesional
Documente Cultură
V100R011C10
Product Description
www.huawei.com
Reference
eRAN11.1 Product Documentation
http://support.huawei.com
Contents
1. System Overview
2. System Structure
3. Auxiliary Devices
4. Typical Configuration
eNodeB in LTE/SAE Network
Baseband Unit
CPRI RF Unit
BBU3900/BBU3910
RFU/RRU/AAU
/BBU3910A
Cabinet
BBU
The exteriors of BBU:
RRU
RFU
Blade RRU
Easy Macro
multiple frequency bands
Integrated module
Large capacity
Capacity Specification (FDD mode)
Item Specification
Maximum number of BBU:36 cells(2 x 2 MIMO)
cells per eNodeB
Downlink rate at the MAC layer: 150 Mbit/s(2*2MIMO,64 QAM)
Maximum throughput
Uplink
rate at the MAC layer: 100 Mbit/s(2x4 MU-MIMO or 2x2 MU-MIMO,
per cell (20 MHz)
16QAM)
Maximum throughput The UMPT is configured : Downlink and Uplink data rate at the MAC layer:
per eNodeB 1500 Mbit/s
Data radio bearer(DRB) A maximum of 8 DRBs can transmit data of a UE at the same time
Capacity Specification (TDD mode)
Item Specification
2. System Structure
3. Auxiliary Devices
4. Typical Configuration
Contents
2. System Structure
2.1 Base Band Unit(BBU) Introduction
Weight: 12 kg
BBU Slot Distribution and Typical
Configuration
Slots for BBU boards and modules
(UBBP)
Logical Structure of BBU
GSM single-mode
UMPTb2 UMTS single-mode
UMPTb1 or UMPTb2 LTE FDD single-mode
LTE TDD single-mode
Co-MPT multimode (including any mode)
Function:
It dissipates heat from other boards in the BBU.
c d
(1) (2) 3V3
BBU connec
power tor
switch
Optional, Provides two ports with each transmitting one RS485 signal
Provides two ports with each transmitting four Boolean signals. The Boolean signals can
only be dry contact or OC signals
Reports monitoring and alarm signals from other devices in the cabinet to the main control
board
USCU (The Universal Satellite card
and Clock Unit )
USCUb11
/USCUb14
The USCUb11 provides ports to communicate with the RGPS (for example the
RGPS on the reused customer equipment) and BITS equipment. It does not
support GPS signals
The USCUb14 contains a UBLOX satellite card. It does not support RGPS signals
The USCUb22 uses a Naviors satellite card, which must be purchased locally and
installed onsite. It does not support RGPS signals.
Contents
2. System Structure
2.1 Base Band Unit(BBU) Introduction
RR
RF U AA
U U
RF
Module
FDD RFU Types
RFU Output
Types TX/RX FRE. Band G/U/L
Name Power
CRFUd 2T2R AWS 2*60W L
LRFU 2T2R 2.6G/AWS 2*40W L
LRFUe 2T2R DD 800 2*60W L
RFU MRFU 1T2R 1.8G/900M 1*60W G/U/L/GU/GL
MRFUd 2T2R 1.8G/900M 2*60W G/U/L/GU/GL
MRFUe 1T2R 1.8G/900M 1*60W G/U/L/GU/GL
Logical Structure of RFU
LRFU
LTE Radio Frequency Units
(LRFUs) work in Frequency
Division Duplex (FDD) mode
RRU3959 2T2R 1.8//2.1 2*60W GSM, UMTS, LTE FDD, GU, GL, GUL, and UL
RRU
RRU3971 4T4R 1.8/1.9/2.1/AWS 4*40W GSM, UMTS, LTE FDD, GU, GL, UL, and GUL
Logical Structure of RRU
RRU3971 Exterior
High integration
Macro-micro coordination
RRU3230E&RRU3930E Exterior
RRUs are classified into RRUs with external antennas and
RRUs with built-in antennas.
Independence Agility
Every frequency band install
Multiple frequency band(900M,
independence, easy to net plan
1800M, 2.1G,2.6G and so on
Every RRU maintenance
Reduce spare part, easy to
independence
import the new frequency band.
RET Modes
2. System Structure
3. Auxiliary Devices
4. Typical Configuration
Mapping between eNodeB Models and
Cabinets
eNodeB Model Cabinet Used
Battery management
Power distribution
Surge protection
Temperature control
Power backup
2. System Structure
3. Auxiliary Devices
4. Typical Configuration
Hardware Quantities in Typical
Configurations (example)
Quantity Quantity Quantity of Quantity of
Configuration RRUs (2TX2RX)
of LMPT of LBBP or RFUs Antennas
3 x 15 MHz/20 3 (dual-polarized
1 LBBPc:1 3
MHz, 2T2R antennas)
3 x 5 MHz/10 3 (antennas with
1 LBBPc:1 6
MHz, 4T4R four ports)
3 x 15 MHz/20
1 UBBPd3:1 3
MHz, 2T2R
3 x 5 MHz/10
1 UBBPd4:1 6
MHz, 4T4R
1 x 15 MHz/20
1 UBBPd4:1 2
MHz, 4T4R
1 DC 1*DCDU-12B Typical
1*OPM50M+1*SPM
2 AC Typical
3*RRU 60A
1*OPM50M+1*SPM
3 AC Typical
60A+1/2*IBBS20D
1 Non-
4 DC 1*DCDU-12B
typical
2*OPM50M+2*SPM
5 6*RRU AC Typical
60A
2*OPM50M+2*SPM
6 AC Typical
60A+2/4*IBBS20D
RF Connection
Specifications of RF Units