Sunteți pe pagina 1din 6

change password <context_name>]] get aam link monitor

clear ecfm errors [domain ecfm ping ethernet mac parameters


<domain-name(1..20)> {<aa:bb:bb:bb:bb:bb> | get aam status
| levelid <level-id(0- multicast } {domain <domain- get air interface authentication
7)>][switchname name(1..20)> | type
<context_name>] level <level-id(0-7)>} [vlan get alarms
clear ecfm frame delay buffer <vlan-id(1-4094)>] get alarms counter
[switchname [interface <interface-number>] get alignment
<context_name>] [direction get antenna diameter
clear ecfm loopback cache {inward | outward}] [data- get atpc status
[switchname pattern <string> | test- get authenticated peer
<context_name>] pattern null-signal-without-crc | get authentication failure action
clear ecfm maintenance-points null-signal-with- get authentication status
remote [ {domain crc | prbs-without-crc | prbs- get backup ipconfig
<domain-name(1..20)> | levelid with-crc] [size get bandwidth record admin
<level-id <pdu-size(64-1400)> | variable- get bandwidth record average
(0-7)>}][switchname bytes][interval period
<context_name>] <milliseconds(1-600000)>] get bandwidth record brief
clear ecfm mip-ccm-database [count get bandwidth record current
[switchname <num_of_msgs(1-8192)>] get bandwidth record
<context_name>] [deadline instance[0-59]
clear ecfm statistics [port <seconds(1-172800)>] [switch get bandwidth record logging
<num<1-1>] [level<level- <string(32)>] get bandwidth record reporting
id(0-7)>] [vlan <vlan-id(1- ecfm ping ethernet mpid <id> period
4094)>]] {domain <domain- get bandwidth record
[switchname <context_name>] name(1..20)> | level <level- thresholds
clear ecfm traceroute-cache id(0-7)>} [vlan get bandwidth record verbose
[switchname <vlan-id(1-4094)>] [interface get bandwidth utilization status
<context_name>] <interface- get bandwidth utilization
clear port eoam config [port number>] [direction {inward | threshold
<num(1-2)>] outward}] [data- get config commands
clear port eoam event-log [port pattern <string> | test-pattern get cos default value
<num(1-2)>] null-signal- get cos ecfm flow mapping
clear port eoam fault- without-crc | null-signal-with-crc get cos expedite queue
management mib-variable | prbs-without- get cos qinq itag
response [port <num(1-2)>] crc | prbs-with-crc] [size <pdu- get cos qinq otag
clear port eoam statistics [port size(64-1400)> get cos queue cbs
<num(1-2)>] | variable-bytes][interval get cos queue cir
copy [ftp:fileName] <milliseconds(1- get cos queue mapping
create ssl certificate 600000)>] [count get cos type
delete ecfmmib [newest|both] <num_of_msgs(1-8192)>] get cos wfq weight
delete mib [newest|both] [deadline <seconds(1- get date time
delete radius server [index] 172800)>] [switch get default gateway
delete user <string(32)>]
diagnose aam ecfm traceroute ethernet mac
diagnose haam [up/down] <aa:aa:aa:aa:aa:aa>
downgrade system licensed {domain <domain-name(1..20)>
speed | level <level-
ecfm frame delay [start | stop] id(0-7)>} [vlan <vlan-id(1-
type {one-way | two- 4094)>] [time-to-live
way }level <level-id(0-7)> [vlan <ttl-value(1-255)>]
<vlan-id(0-7)>] ecfm traceroute ethernet mpid
[port <port-num>] [direction <id> {domain <domain-
{inward | name(1..20)> | level <level-
outward}]{mepid <mpid(1- id(0-7)>} [vlan
8191)> | mac <vlan-id(1-4094)>] [time-to-live
<aa:aa:aa:aa:aa:aa>} <ttl-value(1-
[count<num_of_observations(1 255)>]
-8192)>] erase log
[interval <milliseconds(10- erase performance log
10000)>] [deadline exit
<seconds(1-172800)>] get aam eoam option
[switchname
get default ipconfig level <level-id(0-7)>] [unaware | get maximum frame size
get dropped frames threshold vlan<integer(1- get modem modulation
get dw access 8191)>][{domain <string(20)> | get modem statistics
get ecfm configuration-errors level <integer(0- get network loopback
[vlan <vlan-id(1-4094)>] 7)>}][{unaware | vlan<integer(1- get network management
[interface <interface-id>] 4094)>}] [switch interface
[switchname <string (32)>] get network protocol strict
<context_name>] get ecfm maintenance-points get omni file crc
get ecfm default-domain remote detail {mpid id | get optical transmitter state
[switchname mac <aa:aa:aa:aa:aa:aa> get pause state
<context_name>] }[domain <domain- get performance log
get ecfm domain [brief | name(1..20)> | level <level-id(0- get performance log interval
domain-number(1-32)] 7)> [unaware | get performance logging
[switchname <context_name>] vlan<vlan-id(1-4094)>]] get port eoam event-log [port
get ecfm error-log [domain [switchname <1-2>]
<domain-name(1..20)> | <context_name>] get port eoam event-
levelid<level-id(0-7)>] [unaware get ecfm mip-ccm-database notifications [port <1-2>]
| vlan <vlan- [vlanid <vlan-id(1-4094)>] get port eoam fault-
id(1-4094)>] [switchname [macaddress management config port <1-2>
<context_name>] <aa:aa:aa:aa:aa:aa>] [port get port eoam fault-
get ecfm errors [domain <port- management mib-variable
<domain-name(1..20)> | id>] response port <1-2>
levelid <level-id(0-7)>] get ecfm port [{port <port- get port eoam fault-
[switchname number>}] [switchname management remote-loopback
<context_name>] <context_name>] [port <1-2>] [current-session |
get ecfm frame delay buffer get ecfm service [brief | service- last-session]
[brief] [one-way | two- number(1-32) ] [detail]
way] [level <level-id(0- [switchname <context_name>] get port eoam local information
7)>][unaware | vlan get ecfm statistics [port <port- [port <1- 2>]
<vlan-id(1-4094)>] [interface number> [level <level- get port eoam loopback
<interface- id(0-7)>][<vlan-id(1-4094)>]] capability[port <1-2>]
number>][mac <peer-mac- [switchname get port eoam neighbour
address>] <context_name>] information [port <1-2>]
get ecfm global get ecfm traceroute-cache get port eoam statistics [port
information[switchname get enet address <1-2>]
<context_name>] get enet config get programmed frequency
get ecfm loopback cache [brief] get enet speed alarm enable get qos
[level <level-id(0- port1 | port2 get qos policy
7)>][unaware | vlan <vlan-id(1- get enet speed get queue utilization threshold
4094)>] get enet status get radio band
get ecfm maintenance-point get eoam dwi-msg mode get radio loopback
local [mep | mip] get eoam fault-management get radio statistics
[interface [<interface-number>] | global information get radio status
domain get eoam global information get radio transmitter state
<domain_name> | level<id(0- get frequency bank get radius server deadtime
7)>] get frequency file status get radius server retransmit
get ecfm maintenance-points get group authentication key get radius server timeout
local detail get haam get radius servers
{mpid<mepid(1-8092)> | mac get haam status get radius super user
<aa:aa:aa:aa:aa:aa>} [domain get haam system modes authentication
<domain_name> get haam wtr get redundancy link monitor
| level<level-id(0-7)>] [unaware get health parameters
| vlan get http secure access get redundancy link switch
<integer(1-4094)>] [Admin|Noc|Super] parameters
get ecfm maintenance-points get hw inventory get redundancy mode
remote [domain get install type get redundancy override
<domain-name(1..20)> | levelid get ip address get redundancy partner
<level-id(0-7)>] get leds information
get ecfm maintenance-points get licensed speed count
remote crosscheck get licensed speed downgrade
[mpid <id>] [domain <domain- information
name(1..20)> | get log entries
get logging
get redundancy standby enet set aam eoam option [state vlan-list}] [interval {ten-sec |
state <on/off>] one-min | ten-
get redundancy status set aam link monitor parameters min}]}
get rls set aam mode [system mode set ecfm ccm-unicast-mac
get rls link control name/default] <aa:aa:aa:aa:aa:aa>
get rls link enable set aam time [time in set ecfm default-domain global
get rls link monitor parameters mseconds] levelid <(0-7)>
get rls make rsl set admin user set ecfm default-domain vlan
get rls shutdown policy set air interface authentication <integer(1-4094)>
get rls signal fault parameters type [authentication ([level<integer(0-7)>][mip-
get rls status type] creation-criteria
get rsl threshold set alarms counter [0] {none | explicit | defer |
get sessions set alignment [On | Off] default}][sender-id-
get snmp access mode set antenna diameter [index of permission {none |chassis |
get snmp managers diameter] manage | chassis-
get snmp set request set atpc[on|off] [on|off] [0-10] mgt-address | defer }])
get snmp trap hosts set authentication failure set ecfm disassociate vlan-id
get snmp traps [action] {vlan-id | vlan-list}
get snmpv3 managers set bandwidth record logging[on primary-vlan-id <vlan-id(1-
get snmpv3 trap hosts | off] 4094)>
get snr threshold set bandwidth record set ecfm domain <domain-
get sntp thresholds[thresh] [thresh] name(1..20)> level <level-
get sntp offset [thresh] [thresh] [thresh] [thresh] id(0-7)> [delete]
get ssh server [thresh] set ecfm error-log [on | off] [size
get ssh server fingerprint [thresh] [thresh] [thresh] <entries(1-4096)>]
get ssl certificate status set bandwidth utilization set ecfm mep archive-hold-time
get subnet mask threshold [threshold] [time { <minutes(100-
get super user limit] 65535) | default }
get sw inventory set cos default value [0 - 7] set ecfm mep crosscheck {on |
get sw version set cos ecfm flow mapping off} levelid <level-id |
get syslog forwarding host [off|{on levellist> [vlan <vlan-id |
get syslog forwarding status QC|Q1|Q2|Q3|Q4|Q5}] vlanlist>] [switchname
get system mode set cos expedite queue [on | off] <context_name>]
get system speed set cos qinq itag [protocol id] set ecfm mep crosscheck mpid
get system summary set cos qinq otag [protocol id] <integer(1-8191)>
get telnet access set cos queue cbs [committed [delete|define] [vlan <integer(1-
get traffic statistics burst size] 4094)>]
get transmit power set cos queue cir [0 - 100, 0 - set ecfm mep crosscheck start-
get unique peer authentication 100, 0 - 100, 0 - 100] delay {default}|{start-
key set cos queue mapping [1/2], ... delay<3-100>}
get user accounts set cos type [cos_vlan | set ecfm mep level [<0-7>
get user session cos_qinq_itag | [delete] [inward] mpid
get vlan tag cos_qinq_otag | cos_dscp | <id(1-8191)> [vlan<vlan-id(1-
get vlan tagging cos_mplsexp] 4094)>] [active
get web server set cos wfq weight [weight]
kill ssh sessions set date time [dd/mm/yyyy
list [ftp:file/directory/empty] hh:mm:ss:ms]
lo set default gateway
ping [-w timeout][-n count][-t] [abc.def.ghi.jkl]
abc.def.ghi.jkl set dropped frames threshold
remove frequency indextable [threshold] [time limit]
reset [resource id] set dw access[on | off]
save config [ftp:fileName] set ecfm [on | off | start]
save ecfmmib set ecfm associate vlan-id {vlan-
save log [ftp:fileName] id | vlan-list} primary-
save mib vlan-id <vlan-id(1-4094)>
save performance log set ecfm cc enable level
[ftp:fileName] [disable] {levelid | level-list}
save users [ftp:fileName] [vlan {vlanid | vlan-list}]
set aam [state <on/off>][inter set ecfm cc level {<level-id(0-
mode <on/off>][max Tx- 7)> | level-list} {<default
Pwr <on/off>] [interval] [role]> | [vlan {<vlan-
id(1-4094)> |
ecfm mep-capability level set haam[on/off] set port eoam link-monitor
{<level-id(0-7)> | level- set http secure access frame-sec-summary
list} [on|off] [vlan {<vlan-id(1- [Admin|Noc|Super] [on/off] threshold [port <1-2>]
4094)> | vlan- set ip address [abc.def.ghi.jkl] [<count(0-900)>]
list}]([ping] [muliticast-ping] set lo nulling [on/off] set port eoam link-monitor
[one-way-frame- set logging [on/off] frame-sec-summary
delay] [multicast-test] set maximum frame size [1600- window [port <1-2>] [<size(100
[turnaround-delay][ais] 9600] - 9000)>]
[rdi]) set network loopback [nearend | set port eoam link-monitor
set ecfm mip ccm-database farend | off] mac-address threshold [port <1-2>]
caching {enable | disable} <queue N> <timeout> [frame |frame-period]
set ecfm mip ccm-database set network management [<count(1234..)>]
hold-time [<hours>(24- interface [port1/port2/port2 set port eoam link-monitor
48)] extended] window [port <1-2>]
set ecfm mip ccm-database set network protocol strict [frame <size(10 - 600)> | frame-
size [<entries(1000- [on/off] period
10000)>] set noc user <size(1100000 - 89000000)> ]
set ecfm mip dynamic set optical transmitter state set port eoam mode [port <1-
evaluation {enable|disable} [on/off] 2>] [active | passive]
set ecfm mip level [delete] set pause state [on/off] set port eoam remote-loopback
<level-id(0-7)> vlan <vlan- set performance log interval [port <1-2>] [on | off |
id(1-4094)> [active] [hr:min:sec] deny | permit]
set ecfm mip-creation-criteria set performance logging set programmed frequency
{none | default | explicit} set port eoam [port <1-2>] [on | [IndexID]
set ecfm oui {<aa:aa:aa> | off] set qos [on/off]
default} set port eoam fault indication set qos policy [strict priority /
set ecfm port port<1-1> {on|off} [port <1-2>] [critical- wfq]
set ecfm service <{[config] event | dying-gasp] [on | off] set queue utilization threshold
<service_name> [{icc set port eoam fault- [qid] [depth] [time]
<icc_code> umc <umc_code>] management action [port <1-2>] set radio band
[vlan <vlan-id(1- [critical-event | dying-gasp | [radioBandName]
4094)>] [mip-creation-criteria link-fault] [none | set radio loopback [on | off]
{none | default | warning] <timeout> <network>
explicit | defer}] [sender-id- set port eoam fault- set radio transmitter state [on |
permission {none | management link-monitor action off] [mute time
chassis | manage | chassis- [port <1-2>] [frame | frame- (seconds)]
mgt-address | period | frame-sec- set radius server host [index]
defer}]}>| <{delete summary] [none | warning] [server addr]
<service_name> set port eoam fault- set radius server key [index]
set ecfm traceroute cache [ management mib-request [port [key]
on|off | { holdtime { default <1-2>] set radius super user
| <integer(1-65535)} } <branchleaf:branchleaf:...> authentication [On|Off]
set ecfm y1731 [on | off ] set port eoam fault- set redundancy link monitor
set enet config management mib-variable parameters
set enet speed port[port1 | count set redundancy link switch
port2] [port <1-2>] <count(1-100)> parameters
speed[10|100|1000|auto] set port eoam fault- set redundancy mode
AutoNeg[auto] management remote-loopback set redundancy override
set enet speed alarm enable [port <1-2>] [test] [count <no of [primary | secondary |
port1 | port2 on|off packets(1- manual | auto ]
set eoam [on | off] 1000)>] [packet <size(64- set redundancy standby enet
set eoam dwi-msg mode [eoam 1500)>] [pattern state
| bypass-eoam] <hex_string(8)>] [wait-time set redundancy state switch
set eoam fault-management [on <integer(1-10)>] set rls [on/off] |
| off | start] set port eoam link-monitor [port [basic|advanced]
set eoam link-monitor event- <1-2>] [frame | set rls link control [on/off]
resend [count(1-10)] frame-period | frame-sec- set rls link enable [on/off]
set eoam oui [<aa:aa:aa> | summary] [on | off] set rls link monitor parameters
default] set port eoam link-monitor [mk erred blks] [brk
set group authentication key default [port <1-2>] [frame | erred blks] [mk samples] [brk
[key] frame-period | frame-sec- samples] [mk
set haam manual mode[on|off] summary] [threshold sample time] [brk sample time]
set haam wtr[duration] | window] [brk sample rst
time]
set rls make rsl [make rsl
threshold] [rsl mk sample
time sec]
set rls shutdown policy [port-
down/eoam-msg]
set rls signal fault parameters
[fault period msec] [fault
threshold]
set rsl threshold [threshold]
[time limit]
set snmp access mode
[v1|v2c|off]
set snmp manager [Mgr Index]
[ipAddress]
[enable|disable]
[communityString]
set snmp set request [on|off]
set snmp trap [trap#]
[enable|disable]
set snmp trap host [host#]
[ipAddress]
[enable|disable]
[communityString]
set snmpv3 manager
set snmpv3 trap host
authentication [index]
[none|md5|sha] [passwd]
set snmpv3 trap host disable
[index]
set snmpv3 trap host enable
[index]
set snmpv3 trap host ip
[index] [ipAddress]
set snmpv3 trap host privacy
[index] [none|des]
set snmpv3 trap host user
[index] [userName]
set snr threshold
[SnrThreshold]
set sntp [on|off]
set sntp default
set sntp offset
set sntp server
set ssh server
set subnet mask
[abc.def.ghi.jkl]
set super user
set syslog forwarding [on|off]
set syslog forwarding host
[ipAddress]
set system current speed
[speed]
set system mode [system
mode name]
set telnet [on|off]
set traffic statistics [0]
set transmit power
[powerLevel]
set unique peer
authentication key [key]
set vlan tag [vlan ID(0 -
4095)] [vlan priority(0 - 7)]
set vlan tagging [on|off]
set web server [on|off]
upgrade system licensed speed
[speed increment] [key]

S-ar putea să vă placă și