Documente Academic
Documente Profesional
Documente Cultură
1- ECU preparations
H530 engine is divided into 1.5T BM15T and 1.6L of the three types of 4A92S, which,
4A92S ECU need to replace firmware, you can find group 304315801(qq number
Chinese yahoo) contact the admin and ask for the firmware; BM15T only need to go to
4S(means repairing center in china equal to al tawkeel in egypt) borrow 431 fault
diagnosis, Diagnostic instrument of the Chinese V5 engine options, EOL in the open
cruise, save it.
2- Buttons preparations
Button go to Taobao to buy with the cruise button can be within one hundred rmb & above, all
are original goods.
12-hole connector pin5 42-hole connector pin11 ECU81 hole connector pin35
12-hole connector pin6 42-hole connector pin10 ECU81 hole connector pin43
Explanation :
A. ECU 35 holes are not missing pins, direct wiring, 43 holes missing needles, need to install
the terminal (the terminal can be removed from the removal of the button without
cruise)
B. Throw Wire coming out from ECU can remove battery , directly connect to the 42 big
plug positive wiring harness(positive equal male as we say , also Can be directly
connected to the continuous flow ring on the wiring harness.
The right side of the 5 holes for the 1-5 hole, where not less than do not explain;
The left side is divided into 4 rows, where the first row of the first hole is 6 holes, the second
row of the first hole is 25 holes, the second line near the 5 hole position for the 43 hole.
The lower part of the battery with a large hole in the hole of 42 holes Definitions:
constant flow ring button to define the lower part, the column position brown pin5, blue
pin6
Cruise button position: yellow green for pin1, brown pin5, purple
pin6