Documente Academic
Documente Profesional
Documente Cultură
TECHNICAL DATA
SINTAKOTE STEEL PIPELINE SYSTEMS
GENERAL APPLICATION
TECHNICAL DATA
Size Range
114mm to 2500mm diameter
Operating Pressures
Maximum 3500kPa
Maximum Velocities
6m/s for cement lined fittings
Operating Temperatures
-40C to 70C
Certifications
AS/NZS ISO 9001
AS/NZS 4020
AS 1579 Standards Mark
Steel Mains Steel Pipeline System is Cement Mortar Lining (CML) is the
available across a full size range and can recommended lining for the Steel Pipeline
be tailor-made to suit specific design System pipe and fittings and complies to
parameters. AS 1281. Alternative lining systems are
Bends are generally manufactured from available where required.
pipe depending on diameter and wall Special considerations to the jointing and
thickness required. the pipeline systems capabilities need
The fabricated fitting is 100% non- to be confirmed with Steel Mainsprior to
destructively tested and complies proceeding with design.
to AS 1579. - Consult the Steel Mains Steel Pipeline
SINTAKOTE is the recommended coating Systems Design manual for design
for pipe and fittings for the Steel Mains information.
Steel Pipeline System and complies to AS - Check with Steel Mains
4321. Alternative coatings are available on material availability prior to
where reduced operating life of the pipeline placing orders.
is permissible.
IDENTIFICATION OF BENDS
L1
SPECIFYING BENDS
End A
1 - Cuts
Specify the number of mitre cuts to meet
Steel pipe OD
L2
will also influence the stress in the wall of
the bend. The typical angle per each cut
for each mitre in the bend does not exceed
22.5 degrees
2 - End type
le
ius
Ang
Specify the end types (A and B) on the
Rad
bend:
- Plain - most commonly used
Number of - RRJ Spigot, RRJ Socket, Flange etc.
mitre cuts End B Specify paint system for flanges, if
applicable. Inorganic Zinc paint is included
as standard
s
ut
B
in
rc
s 3 - Radius
er
es
pe
pe
itt
g
be
et
us
lf
in
kn
ty
ty
ng
e
m
d
um
am
pe
gl
at
di
ee
ic
ni
al
m
Be
An
Ra
En
En
Co
Pi
th
St
Li
di
N