Documente Academic
Documente Profesional
Documente Cultură
udj
filehgkjh
/end COMPU_METHOD
gsdf
given
hfhhg
/* Note:
*/
/* Testbench with ASAP3 do not support text. It is common use that the MCD tools
transfer the */
/* internal value instead
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Measurements
*/
/*
*/
/* Note:
*/
/* In this example the values for Resolution and Accuracy are set to "0" as they
are normally */
/* not evaluated by measurement and calibration tools
*/
/* It is allowed to use the same address for multiple measurements. By this it is
possible */
/* to use different bitmasks / computation methods for the same int value
*/
/*
*/
/* Note:
*/
/* There is for each data type one example
*/
/* With one data type (UBYTE) there is for each computation method an example
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Record Layouts for Characteristics (Parameters)
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Scalar Characteristics (Parameters)
*/
/*
*/
/* Note:
*/
/* MAX_DIF is always set to 0 as it is normally not evaluated by measurement and
calibration tools */
/*
*/
/* Note:
*/
/* There is for each data type one example
*/
/* With one data type (SWORD) there is for each computation method an example
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Array Characteristics (Parameters)
*/
/*
*/
/* Note:
*/
/* All examples are based on SWORD. For other data types see scalare parameters
*/
/*
*/
/* Note:
*/
/* For curve are examples for all kind of axis available
*/
/* For map, cuboid are examples with mixed axis types available
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* ASCII Characteristics (Parameters)
*/
/*
*/
/* Note:
*/
/* All examples are based on UBYTE. This is necessary for ASCII
*/
/*
*/
/* Note:
*/
/* NUMBER shall state the maximum (fixed) size of memory available on the ECU
*/
/* The string representation in the MCD tool is normally 0-terminated. There the
string may be */
/* limited earlier
*/
/*
*/
/*
===================================================================================
=========== */
/begin CHARACTERISTIC
ASAM.C.ASCII.UBYTE.NUMBER_42
"ASCII string"
ASCII
0x810200
RL.FNC.UBYTE.ROW_DIR
0
CM.IDENTICAL
0 255
NUMBER 42
DISPLAY_IDENTIFIER DI.ASAM.C.ASCII.UBYTE.NUMBER_42
/end CHARACTERISTIC
/*
===================================================================================
=========== */
/*
*/
/* Curve, Map, Quboid Characteristics (Parameters)
*/
/*
*/
/* Note:
*/
/* All examples are based on SWORD. For other data types see scalare parameters
*/
/*
*/
/* Note:
*/
/* For curve are examples for all kind of axis available
*/
/* For map, cuboid are examples with mixed axis types available
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Virtual Characteristics (Parameters)
*/
/*
*/
/* Note:
*/
/* The value of the virtual parameter is not located in the ECU memory. It is only
visible */
/* in the MCD tool
*/
/* The MCD tool updates the value when the source value is changed
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Functions
*/
/*
*/
/* Note:
*/
/* Each parameter shall be defined (DEF_CHARACTERISTIC) only one time!
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Groups
*/
/*
*/
/* Note:
*/
/* For GROUP there is no special sorting defined
*/
/* It is up to the user to define one ore more sortings
*/
/*
*/
/*
===================================================================================
=========== */
/end MODULE
/end PROJECT