Documente Academic
Documente Profesional
Documente Cultură
Rebound hammer)
Introduction :
The rebound hammer strength test , being a non-destructive test . has its
advantages of preserving integrity of sample. Beside that, the test os relative
simple , economical and versatile compared to conventional tests. This method
widely used for testing concrete manufactures of such rebound hammer usually
provide calibrated curve showing the relation of compressive strength and
rebound number concrete only. But these hammer are conveniently be used to
test stones and bricks also. This test have 3 sample of cube to be test. 16 time
for vertical hammer position . End of this test, students be able to indentify the
compressive strength based on the graph and find the quality of concrete in
relation to standard requirement.
2) Abbrassive strength
Test specimens :
Procedure :
1.Firstly, the test area with smooth surface and no honey comb are selected.
Then, using the abbrasive stone , grindly heavily textured or soft surface until
there are smooth.
2.Then, draw the line of the specimen with 25mm each box
3.Then, hold the hammer firmly in a position that allows the plunger to impact
perpendicularly to the surface being tested.
4.Gradually increase the pressure on the plunger until the hammer impacts.
5.Then, record the rebound number and also record the position and
orientation of the hammer for each set of reading
Discussion:
3. Discuss the limition or affect the quality of concrete on rebound hammer test
4. Discuss the precaution have you taken in your experiment in order to avoid
the erroneous result.
LABORATORY MATERIALS ENGINEERING
Table 1 show the quality of concrete based on the average rebound number
LABORATORY MATERIALS ENGINEERING