Documente Academic
Documente Profesional
Documente Cultură
Contents
Gauge Valves
GV Series, GVH Series and GR Series
C-04
Instrumentation Manifolds
2-valve Manifolds
C-09
3-valve Manifolds
C-13
5-valve Manifolds
C-15
C Integral Manifolds
C-19
Accessories
Manifolds
Kidney Flange / Eccentric Flange
C-23
Gauge Valves
GV Series, GVH Series and GR Series
Features
Working pressure up to:
Stainless steel: GV, GR up to 6000 psig (414 bar)
GVH up to 10000 psig (690 bar)
GV Series and GVH Series working temperature:
PTFE packing: -65 F to 450 F (-54 C to 232 C)
Graphite packing: -65 F to 1200 F (-54 C to 649 C)
GR Series working temperature:
Acetal seat: -20 F to 250 F (-28 C to 121 C)
PEEK seat: -20 F to 400 F (-28 C to 204 C)
Non-rotating lower stem, ball tip and plug tip designs
Variety of materials for seat and packing
Safety back seating seals in fully open position
Rolled spindle operating threads
Lubricant for stem thread isolated from the media
Externally adjustable gland
Bonnet locking pin fitted as standard
Low torque operating T bar handle
Option for different colored handles
Steady and durable fastening of the handle by double lock-pins
Each GV/GR Series gauge valve leak tested with nitrogen/air at the maximum working pressure, each
GVH Series gauge valve leak tested with water at 1.1 times the maximum working pressure
7
3 Packing Bolt 304 SS/A479 8
9
4 Upper Stem 316 SS/A479 10
11
5 Lock Nut Stainless steel
3
Hardened
10 Lower Stem 4
316 SS/A479
5
316 SS/A479 6
11 Body
316 SS/A182 7
8
12 Seat Acetal or PEEK 9
10
Lubricant Molybdenum disulfide-based 11
12
Process interface valves for sour gas service are available. Materials are selected in accordance with
NACE MR0175/ISO 15156. Contact FITOK Group or our authorized distributors if you have any request.
Gauge Valves and Instrumentation Manifolds C-05
-54 38 149 260 371 482 593 704 -54 38 148 260 371 482 593 704
6500 448 11000 758
316 SS
6000 414 10000 690
5500 379 9000 620
5000 345 8000 552
4500 310 316
7000 483
Pressure (psig)
Pressure (bar)
SS
Pressure (psig)
4000 276
Pressure (bar)
6000 414
3500 241
5000 345
3000 207
4000 276
2500 172
3000 207
2000 138
2000 137
1500 103
1000 69 1000 69
500 35 0 0
-65 100 300 500 700 900 1100 1300
0 0
-65 100 300 500 700 900 1100 1300 Temperature (F)
Temperature (F)
Temperature (C)
5500 379
5000 345
4500 310
4000 276
Pressure (psig)
Manifolds
Pressure (bar)
3500 241
3000 207
2500 172
2000 138
1500 103
1000 69
500 35
0 0
-65 0 100 200 300 400 500 600 700
Temperature ( F)
1. For manifolds of Acetal seat, the maximum medium temperature is 250F ( 121C), not recommended for temperature higher than
200F (93C) for water and steam application.
2. Based on PEEK seat and PTFE packing.
C-06 Gauge Valves and Instrumentation Manifolds
(31.75)
1.25"
2.97" 1.50"
(75.4) (38.1)
5.38" 1.25"
(137.0) (31.75)
Plug
Basic Ordering Number Inlet/Process Outlet/Instrument Test/Vent/Plug Isolate
GV-NS8-FNS8-E Process Instrument
GVH-NS8-FNS8-E 1/2 Male NPT 1/2 Female NPT 1/2 Female NPT
Test/Vent
GR -NS8-FNS8-E
(31.75)
1.25"
4.84" 1.50"
(123.0) (38.1) 1.25"
7.25" (31.75)
(184.0)
Manifolds
Miniature Type
(28.6)
1.13"
3.69" 1.13"
(93.7) (28.6)
Ordering Number Description
SS 316 SS FNS Female NPT 8 1/2" Same as Standard Same GV Same as PTFE Black
GV Type Body GV Aluminum NO FC-01
Ball Tip
6L 316L SS NS Male NPT 12 3/4" Inlet as Body Series
Design Series Bar
S4 304 SS FRT Female BSPT 20 M20 x 1.5 Acetal W Stellite G Graphite
GVH Specify in the C Miniature GR Red S NACE F2 FC-02
4L 304L SS RT Male BSPT same way as Type Series D5 Duplex 2205 MR0175
P PEEK PTFE GR R Aluminum
321 SS Female inlet type and Extended TI Titanium Gr.4 Series Bar
GR Plug Tip S1 E Type
Design Duplex Metric size A20 Alloy 20
D5 2205
FMS Thread
Alloy 600 M 321
(for RP) INC Stainless
Titanium HC Alloy C-276 Steel Bar
TI Gr.4 Male Metric
MS Thread
A20 Alloy 20 (for RG)
M Alloy Female BSPP
400 FRP (for RP)
INC Alloy
600
HC Alloy
C-276
B Brass
CS Carbon
Steel
904L 904L SS
Note: "Ordering Number Description" is a reference to understand the combination rules of FITOK product
part number. Not all combinations are available.
Manifolds
C-08 Gauge Valves and Instrumentation Manifolds
Instrumentation Manifolds
Features
Working pressure up to:
Stainless steel: 2D, 2R, 3D, 3R, 5D, 5R up to 6000 psig (414 bar)
2DH, 2RH, 3DH, 3RH, 5DH, 5RH up to 10000 psig (690 bar)
Alloy C-276: 2D, 2R, 3D, 3R, 5D, 5R up to 6000 psig (414 bar)
Working temperature:
PTFE packing: -65 F to 450 F (-54 C to 232 C)
Graphite packing: -65 F to 1200 F (-54 C to 649 C)
Orifice: 0.157" (4.0 mm)
Two-piece stem design: Upper stem threads cold rolled and
hardened lower stem for high strength and smooth operation
Upper stem thread lubricant isolated from system media
Linear instead of rotary motion of the rising, non-rotating stem
minimizes packing abrasion and reduces the friction between
the seat and the tip
Safety back seating seals in fully open position
Steady and durable fastening of the handle by double lock-pins
Each 2D/2R/3D/3R/5D/5R Series manifold leak tested with nitrogen/air at the
maximum working pressure, each 2DH/2RH/3DH/3RH/5DH/5RH Series
manifold leak tested with water at 1.1 times the maximum working pressure
Temperature (C)
Temperature ( C)
Manifolds
-54 38 149 260 371 482 593 704 -54 38 148 260 371 482 593 704
6500 448 11000 758
6000 414 10000 690
5500 Al 379 9000 620
lo
5000 y 345
C- 8000 552
31 27
4500 6S 6 310
Pressure (bar)
Pressure (bar)
SS
Pressure (psig)
4000 276
6000 414
3500 241
5000 345
3000 207
4000 276
2500 172
3000 207
2000 138
1500 103 2000 137
1000 69 1000 69
500 35 0 0
0 -65 100 300 500 700 900 1100 1300
0
-65 100 300 500 700 900 1100 1300 Temperature (F)
Temperature (F)
Process interface valves for sour gas service are available. Materials are selected in accordance with
NACE MR0175/ISO 15156. Contact FITOK Group or our authorized distributors if you have any request.
Design Standards
Instrumentation manifolds are designed and manufactured in accordance with ANSI B31.1 and B31.3,
as well as MSS-SP-105. Flange design meets the requirements of MSS SP-99.
2-valve manifold is used with pressure gauges or pressure transmitters.
3-valve and 5-valve manifolds are used with differential pressure transmitters.
Manifolds
Basic Ordering Number Inlet/Process Outlet/Instrument Test/Vent
2D -FNS8-A
1/2 Female NPT Flange 1/4 Female NPT
2DH -FNS8-A
2.13"
(54.0)
Instrument
P
T
(76.0)
3.00"
1.62"
(41.2)
Isolate Test/Vent
0.47"
4x
( 12.0)
0.83"
(21.0)
Notes: 1. Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and four 7/16" UNF x 1.75" high tensile
bolts
2. Dimensions shown are for 2D Series manifolds. For dimensions of 2DH Series manifolds, please contact FITOK Group or our
authorized distributors
C-10 Gauge Valves and Instrumentation Manifolds
2x 0.47" 1.30"
1.62"
(41.2)
( 12.0) (33.0)
Instrument
P
T
(63.5)
2.50"
Isolate Test/Vent
1.25" 2.13"
(54.0) Process
(32.0)
2.68"
(68.0)
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two 7/16" UNF x 1.75" high tensile bolts.
1.25"
(32.0)
(47.8)
1.88"
Test/Vent
3.81"
(96.8)
Instrument
0.28"
P Process
T
( 7)
Isolate
2x
1.62" 1.63"
(41.2)
(41.4)
2.44"
(62.0)
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two 7/16" UNF x 24 mm high tensile bolts.
Manifolds
2x 0.47"
( 12.0)
Instrument
P
T
(63.5)
2.50"
1.62"
(41.2)
Isolate Test/Vent
1.18"
(30.0) Process
3.50"
(88.9)
7.83"
(198.7)
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two 7/16" UNF x 1.75" high tensile bolts.
Gauge Valves and Instrumentation Manifolds C-11
(31.75)
1.25"
2x 0.47" 1.00"
( 12.0) (25.4)
Instrument
P
T
(41.2)
1.62"
Isolate Test/Vent
1.18"
(30.0) Process
3.50"
(88.9)
7.83"
(198.7)
Every manifold is supplied with one PTFE sealing ring for manifold-to-instrument and two 7/16" UNF x 1.75" high tensile bolts.
2x 0.28"
( 7.0)
Test/Vent
2.05"
(52.5)
Instrument
P
(29.3)
1.15"
T Process
Isolate
Manifolds
(62.0)
Dimensions shown are for 2R Series manifolds. For dimensions of 2RH Series manifolds, please contact FITOK Group or our
authorized distributors.
0.87"
(22.0)
Instrument
P
T
2.32"
(58.9)
1.38"
0.34"
(49.0)
1.93"
2x (35.0)
( 8.5)
Instrument
P
2.32"
(58.9)
T
Test/Vent Isolate
2R -NS8-H
1/2 Male NPT 1/2 Male NPT 1/4 Female NPT
2RH -NS8-H
(117.6)
4.63"
Instrument
P Test/Vent
T
Isolate
Process
1.25" 1.25"
(31.75) (31.75)
Dimensions shown are for 2R Series manifolds. For dimensions of 2RH Series manifolds, please contact FITOK Group or our
authorized distributors.
Manifolds
2x 0.24"
( 6.0)
Instrument
P
T
(50.0)
1.97"
2.44"
(62.0)
Test/Vent Isolate
Process
1.08" 2.07"
(27.5) (52.5)
Gauge Valves and Instrumentation Manifolds C-13
3-valve Manifolds
Consist of two block valves and one equalizer valve
0.47" Instrument
4x
(41.2)
1.62"
( 12.0) D
P
1.38"
(35.0) Equalize
(64.0)
2.52"
Isolate Isolate
1.18" Process
1.25"
(32.0) (30.0)
2.13"
(54.0)
3.74"
(95.0)
Notes: 1. Every manifold is supplied with two PTFE sealing rings manifold-to-instrument and four 7/16" UNF x 1.75" high tensile bolts.
2. FL8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
3. Dimensions shown are for 3D Series manifolds. For dimensions of 3DH Series manifolds, please contact FITOK Group or our
authorized distributors.
Instrument Manifolds
4x 0.47" D
( 12.0) P
Plug Plug
(76.0)
3.00"
Equalize
1.62"
(41.2)
Isolate Isolate
0.83"
(21.0)
1.18" Process
(30.0)
1.25"
2.13"
(32.0) (54.0)
4.33"
(110.0)
5.60"
(142.0)
Notes: 1. Every manifold is supplied with two PTFE sealing rings for manifold-to-instrument and four 7/16" UNF x 1.75" high tensile bolts.
2. FL8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
C-14 Gauge Valves and Instrumentation Manifolds
2.13"
3.38"
1.14"
(54)
(86)
(29)
Process Equalize D
P Instrument
Isolate Plug
1.25"
3.74" (32.0)
(95.0) 1.62"
(41.2)
2.40
(61)
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four 7/16" UNF x 24 mm high tensile bolts.
2.13"
(54)
1.14"
21/4 NPT
(29)
Manifolds
Instrument
D
P
Equalize
3.74"
(95)
Isolate Isolate
Process
0.28"
2 x ( 7)
47/16-20 UNF
2.13"
1.62" (54)
(41.2) 3.38"
2.44" (86)
(62.0)
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four 7/16" UNF x 24 mm high tensile bolts.
Gauge Valves and Instrumentation Manifolds C-15
(16.0)
0.63" 0.69" 0.28"
2x
(17.5) ( 7.0)
Instrument
D
(63.5)
2.50"
P
Plug Plug
Equalize
Notes: 1. FL8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
2. Dimensions shown are for 3D Series manifolds. For dimensions of 3DH Series manifolds, please contact FITOK Group or our
authorized distributors.
5-valve Manifolds
1. 5-valve Manifold of Double-bleed Function:
consist of two block valves, two bleed valves and one equalizer valve
Manifolds
Instrument
D
P
(41.2)
1.62"
(76.0)
3.00"
Equalize
Test/ Isolate Test/
0.75"
Vent
(19.0)
Vent
4 x 0.47"
( 12.0) Process
1.25" 1.18"
(32.0) (30.0)
2.13"
(54.0)
2.95"
(75.0)
4.33"
(110.0)
5.60"
(142.0)
Notes: 1. Every manifold is supplied with two PTFE sealing rings for manifold-to-instrument and four 7/16" UNF x 1.75" high tensile bolts.
2. FL8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
3. Dimensions shown are for 5D Series manifolds. For dimensions of 5DH Series manifolds, please contact FITOK Group or our
authorized distributors.
C-16 Gauge Valves and Instrumentation Manifolds
(41.2)
(32.0)
1.62"
1.25"
Isolate
Process
Test/Vent
Test/Vent
3.38"
(85.9)
2.13"
2.13"
1.14"
Process
(54)
(29)
(54)
Isolate
2x 0.28"
( 7)
4.48"
(114)
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four 7/16" UNF x 24 mm high tensile bolts.
Instrument
D
P
Equalize
3.00"
(76.0)
Notes: 1. FL8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
2. Dimensions shown are for 5R Series manifolds. For dimensions of 5RH Series manifolds, please contact FITOK Group or our
authorized distributor.
Gauge Valves and Instrumentation Manifolds C-17
Instrument
2x 0.34"
( 8.6)
(28.7)
1.13"
Test/Vent Test/Vent
(91.9)
3.62"
Equalize
Isolate Isolate
2.13"
(54) Process
3.38"
(85.9)
Instrument
D
1.62"
(41.2)
P
Plug Plug
Equalize Equalize
3.00"
(76.0)
1.25" (54.0)
(32.0)
4.33"
(110.0)
5.60"
(142.0)
Notes: 1. Every manifold is supplied with two PTFE sealing rings for manifold-to-instrument and four 7/16" UNF x 1.75" high tensile bolts.
2. FL8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
Manifolds
Basic Ordering Number Inlet/Process Outlet/Instrument Vent Test
5D-FNS8-VB 1/2 Female NPT Flange 1/4 Female NPT Optional
(62.0)
(41.2)
1.62"
2.44"
Plug
Isolate
Process
2x 0.28" Equalize
( 7)
1/4 NPT Test/Vent
Instrument D P Vent
(85.9)
1.14"
3.38"
2.13"
2.13"
(54)
(54)
(29)
Equalize
Isolate
Process
Plug
4.48"
(114)
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four 7/16" UNF x 24 mm high tensile bolts.
C-18 Gauge Valves and Instrumentation Manifolds
47/16-20 UNF
(41.2)
1.62"
2.44"
(62.0)
1/4 NPT Vent Plug
Isolate
Process
Equalize
2x 0.28" Test/Vent
( 7)
Instrument DP Vent
Equalize
Process
2.13"
1.14"
2.13"
3.38"
(29)
(54)
(86)
(54)
Isolate
Plug
21/4 NPT
3.74"
(95)
Every manifold is supplied with two PTFE sealing ring for manifold-to-instrument and four 7/16" UNF x 24 mm high tensile bolts.
Instrument
Manifolds
1.13" D
P
(28.7)
Equalize Equalize
(91.9)
3.62"
5R-FL8-FNS8-AB 1/2'' FITOK 1/2 Female NPT 1/4 Female NPT Optional
Instrument
D
P
Plug Plug
3.00"
(76.0)
Equalize Equalize
FL 8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
C Integral Manifolds
C Integral Manifold is specifically designed for the pressure transmitters of Rosemountcoplanar, including Model 3051C,
3051S, 2024 and 3095. It can be assembled directly to transmitters, eliminating the need for flanges.
Each of the following manifolds contains four 7/16" UNF x 2" high tensile bolts.
Instrument
2.13" 4x 0.47" P
( 12.0) T
(54.0)
Manifolds
Isolate Test/Vent
(76.0)
3.00"
(41.2)
1.62"
Process
1.18"
(30.0)
3.35"
(85.1)
4.37"
(110.0)
C-20 Gauge Valves and Instrumentation Manifolds
Instrument
D
P
Plug plug
Equalize
1.30"
(33.0) Isolate Isolate
3.00"
(76.0)
1.62"
(41.2)
4x 0.47" Process
( 12.0) 1.18"
(30.0)
2.13"
1.25" (54.0)
(32.0) 3.35"
(85.0)
5.60"
(142.0)
4x 0.47"
( 12.0) Instrument
D
1.30" P
(33.0)
1.62"
(41.2)
(76.0)
3.00"
Equalize
1.18"
(30.0)
Test/ Isolate Test/
Vent Vent
2.13"
(54.0)
Manifolds
1.25"
(32.0) 3.35" Process
(85.0)
4.02"
102.0
5.60"
(142.0)
Dimensions shown are for 2D/3D/5D Series manifolds. For dimensions of 2DH/3DH/5DH Series manifolds, please contact FITOK Group
or our authorized distributors.
FL8 connections are obtained by adding an extra CM tube fitting to the FNS8 connections.
Gauge Valves and Instrumentation Manifolds C-21
1.54''
(39.0)
(47.0)
1.85''
1.38''
(35)
1.18''
(30)
(30.0)
1.18"
(71.0)
2.80''
(155.0)
6.10''
2.80''
(71.0)
3. SS-M2P-2BK-50 fits with
2R-XX-V
4. SS-M2P-2BK-17.5 fits with
3R-XX-V
5. SS-M2P-2BK-28.7 fits with
3.54'' 0.39''
5R-XX-VB (90.0) (10.0)
SS-M2P-6BK SS-M2P-8BK
1. The integral assembly includes: bracket, U-bolts, 1. The bracket support is available for horizontal or vertical installation
bolts, gaskets, nuts 2. The integral assembly includes: bracket, U-bolts, bolts, gaskets, nuts
2. Fits with 2D-XX-C, 3D-XX-C, 3. Fits with 2D-XX-A, 2D-XX-L, 2D-XX-H,
5D-XX-C, 2DH-XX-C, 3DH-XX-C, 2D-XX-V, 3D-XX-A, 3D-XX-L, 5D-XX-A, 5D-XX-AB
5DH-XX-C
3.35''
(85)
Manifolds
1.18''
1.18''
1.18''
(30)
(30)
(30) 1''
(113.0)
4.45''
(25.4)
0.79''
(20.0)
(106.0)
4.17''
2.80'' 0.79''
(70.0)
2.76''
(71.0)
(20.0)
6.5''
(165.0)
2.80''
(71.0)
2.80''
(71.0)
4.13''
(105.0)
For more installation information regarding other manifolds, please contact FITOK Group or our authorized distributors.
Manifolds
SS 316 SS FNS Female NPT 4 1/4" D type: Angle Test and No 7/16 - 20 2.13" NO
2 2-valve D A No FC-01
Flange Pattern vent UNF x 1.75" (54 mm)
3 3-valve Direct 6L 316L SS FRT Female BSPT 8 1/ 2" 1/4 Female
Mount Compact sharing one S NACE
R type: port T NPT with Y Yes 7/16 - 20 2.19" MR0175 F2 FC-02
5 5-valve DH S4 304 SS Female 12 3/4"
C Pattern 1 UNF x 3" 56 (55.6 mm)
Metric Same as Relief Valve
4L 304L SS FMS Thread 20 M20 x 1.5 Inlet Valves In-Line Test and 1/4 Female 2 M10 x 40 mm
R L vent 57 2.25"
(for RP) Mounted (57.2 mm)
Remote S1 321 SS Specified in E separated P NPT with 3 M12 x 40 mm
Mount Duplex Flange the same way Valves Plug
RH D5 F
2205 as the inlet H Horizontally
C-22 Gauge Valves and Instrumentation Manifolds
Accessories
Kidney Flanges and Eccentric Flanges
Features
Working temperature:
PTFE: -65 F to 450 F (-54 C to 232 C)
Graphite: -65 F to 1200 F (-54 C to 649 C)
Integral forged body
Standard material: A182 F316
(62.2)
2.45"
(62.2)
2.45"
0.06" A
A
(1.6)
The process connection type of transmitter can be transformed to other connection types.
Dimension Dimension
Basic Ordering Connection Type in. (mm) Basic Ordering Connection Type in. (mm)
Number and Size Number and Size
Manifolds
A A
SS-KF-FNS4 1/4 Female NPT 1.10 (28) SS-EF-FNS4 1/4 Female NPT 1.10 (28)
SS-KF-FNS8 1/2 Female NPT 1.10 (28) SS-EF-FNS8 1/2 Female NPT 1.10 (28)
SS-KF-FL8 1/2'' FITOK 2.48 (63) SS-EF-FL8 1/2'' FITOK 2.48 (63)
SS-KF-PB8 1/2 PB 2.10 (53.3) SS-EF-PB8 1/2 PB 2.10 (53.3)
A kidney flange set contains a PTFE flange seal ring and two 1. Eccentric flange needs to be ordered in whole set.
7/16 - 20 UNF high tensile bolts. 2. A whole eccentric flange set contains two eccentric
flanges, two PTFE flange seal rings and four 7/16 - 20
UNF high tensile bolts.
The standard flange seal material is PTFE, graphite is an option. To order graphite flange seal material, add ''- G'' as a suffix.
C-24 Gauge Valves and Instrumentation Manifolds
Combinations of eccentric flange set can give different center line distances of 2.0" (50.8 mm), 2.13" (54 mm) and 2.25" (57 mm).
Chrome-plated Stem
and Tip Extend Cycle Life.
Manifolds
Gauge Valves and Instrumentation Manifolds C-25
Rosemount Transmitters
3051 CD X X 2 (3, 4, 5, 7, 8) X X X X A4
3051 CD X X 0 X X X X H2 (H3, H4, H7, HJ) A1
3051 CD X X 0 X X X X HK A2
3051 CD X X 0 X X X X HL A3
3051 CD X X 0 X X X X DF A5 A
3051 CG (CA) X X 2 (3, 4, 5, 7, 8) X X X X A4
3051 CG (CA) X X 0 X X X X H2 (H3, H4, H7, HJ) A1
3051 CG (CA) X X 0 X X X X HK A2
3051 CG (CA) X X 0 X X X X HL A3
3051 CG (CA) X X 0 X X X X DF A5 A
1151 D (H) P 3 (4, 5) X XX XX A1
1151 A (G) P 3 (4, 5) X XX XX A1
1151 D (H) P X X XX XX DF A5 A
EJA Transmitters
EJA1X0A-XXX0 (5) X-XXXX A1
EJA1X0A-XXX1 (2, 3, 4) X-XXXX A5 A
EJA3 (4, 5) X0A-XXX0 (5)X-XXXX A1
EJA3 (4, 5) X0A-XXX1 (2,3,4)X-XXXX A5 A
Honeywell Transmitters
STDXXX-XXA-XXX A1
STDXXX-XXH-XXX A5 A A5
Manifolds
STXXXX-XXG-XXX A1 A
STGXXX-XXA-XXX
SMXXXX-XXA-XXX A1
SMXXXX-XXH-XXX A5 A
SIEMENS Transmitters
FITOK, Inc.
13843 North Promenade Blvd., Suite 750, Stafford, Texas 77477, USA
Tel.: +1 281 888 0077 Fax: +1 281 582 4051
FITOK Incorporated
Block C, Zone E, Yingtai lndustrial Park, Dalang Street,
Longhua New District, Shenzhen, 518109, China
Tel.: +86 755 2803 2500 Fax: +86 755 2803 2619
info@fitokgroup.com
www.fitokgroup.com
FK-IC-GV-12-EN-170