Documente Academic
Documente Profesional
Documente Cultură
1. A network configuration is shown below. All components in the network have the same mission
reliability equal to p.
(a) Develop an expression for the reliability of the network configuration by using the minimum cut-set
methodology (third-order cut max).
Note: The final reliability expression must be in the form of a polynomial in terms of p only (i.e., R1 =
R2 = R3 = R4 = R5 = R6 = R7 = R8 = p).
(b) Calculate the system network reliability if p = 0.90.
2. A network configuration is shown below. All components in the network have the same mission
reliability equal to p.
(a) Develop an expression for the reliability of the network configuration by using the minimum tie-set
path enumeration method.
(b) Calculate the network reliability (i.e., the reliability of an individual component p = exp (-t) for a
mission time of 168 h, given = 5.493798319 failures/year.
3. Calculate the reliability of the system shown for a 100 hr mission
1 12 x10 5 f / hr 2 2 x10 4 f / hr
3 1x10 5 f / hr 4 5 10 x10 5 f / hr
6 5 x10 5 f / hr 7 10 x10 5 f / hr
2 out of 3
1 out of requirement
2 requirement
4
2
5
1
2
6
1
Redundant
paths
3 7
4. Consider the system shown. Assume that the signal can flow only in the directions shown.
(a). Develop an equation for the reliability of this system by using bayes method.
(b). Use your equation to calculate the system reliability if all components have a reliability of
0.9.
1 2 3 4
input
output
5 6
Selamat bekerja
input
7 8 9 10
Selamat bekerja