Sunteți pe pagina 1din 2

RF Planning and Optimization VIVA question part-2

Figure: Photo of Radio Base Station

What is the Panoramic view and why it's important ?

Answer: Panoramic view is the 360 degree view of a given point or point of interest. We often
need to know the surroundings of a proposed wireless site or existing due to fresh installation,
expansion or swap. Because we need to declare the cell azimuth of site on the basis of traffic
potentiality, hence we can make a good assumption from the panoramic view about the
potential traffic.

What do you know about TSS ? Describe in brief.

Answer: TSS means for Technical Site Survey. TSS deals with the existing site information
like radio parameter,radio equipment,power equipment, system configuration, cable length,
Type of site etc. In TSS there is some mandatory data also like site coordinate, site address,
site view, site access information etc.

What is the RF (radio frequency) antenna parameter ?

Answer: RF (Radio frequency) antenna parameter includes height of antenna, azimuth of


antenna, Electrical tilting, mechanical tilting, type and size of antenna, TMA (Tower mounted
amplifier) information, RRU (Radio remote unit) information, feeder cable issues (Type,
length and size) etc.

What is LOS, write down few names of LOS tools.

Answer: LOS means for Line of Sight. It's important due to Microwave Planning and for a
successful microwave link you should have to confirm that LOS is clear.
List of few LOS survey Tools:
GPS / DGPS
Binoculars (10 kms and more)) with compass built in
Magnetic compass
Digital camera
Heliographic Mirror (Optional)
Digital Inclinometer
Digital altimeter (barometric)
Digital stop watch
Measuring Tape 100mts
Mobile handset
Safety kit etc.

S-ar putea să vă placă și