Documente Academic
Documente Profesional
Documente Cultură
XX series exit
devices
Service manual
Contents
4 Introduction 46 25 Series
4 How to order 47 (F)25 rim exit device
4 Part number changes 49 25-V surface vertical rod exit device
51 (F)25-V surface vertical rods and latches
5 19 Series 53 (F)25-C concealed vertical rod exit device
6 19 and F-19 rim exit device 55 (F)25-C and F-25-C-WDC-90 concealed vertical rods
8 19-V and F-19-V surface vertical rod exit device and latches
10 19-V and F-19-V surface vertical rods and latch cases 57 25-C-WDC and F-25-C-WDC-20 concealed vertical rods
12 19 Series: control trim, knob (911) and lever (912) for rim and latches
and vertical device 59 (F)25-M mortise exit device
14 19 Series: control trim, knob (911) and lever (912) dummy 61 25 Series trim: lever (510), vandal resistant (vr) lever
for rim and vertical device (511), knob (513)
15 19 Series: control trim (918) for rim and vertical device 63 25 Series trim: lever (510), knob (513)
16 19 Series: Trident trim* (920) and Centron trim* (917, 65 25 Series trim: thumbpiece (512)
930) 67 25 Series trim: thumbpiece (512)
16 19 Series: optional equipment 69 25 Series trim: delta pull
70 25 Series trim: FSA/FSE, electric lock /unlock
17 24 Series 71 24 /25 Series channel cover plate options
18 (F)24 rim exit device 72 24 /25 Series electrical options
20 (F)24-V surface vertical rod exit device 74 24 /25 Series miscellaneous kits and parts
22 (F)24-C concealed vertical rod exit device 76 Refill parts /packages
24 (F)24-V surface vertical rods and latches
26 (F)24-C and F-24-C-WDC-90 concealed vertical rods 77 XX Series
and latches 78 XX-rim exit device
28 24-C-WDC and F-24-C-WDC-20 concealed vertical rods 79 F-XX-rim exit device
latches
80 (F)XX-rim center case
30 24 Series: knob (711) and lever (712) trimrim and vertical
81 XX-V surface vertical rod exit device
device
82 F-XX-V surface vertical rod exit device
32 24 Series: knob (711) and lever (712) trimconcealed
device 83 (F)XX-V surface vertical rods and latches
34 24 Series: knob (711) and lever (712) dummy trim for rim, 84 XX-C concealed vertical rod exit device
vertical and concealed device 85 F-XX-C concealed vertical rod exit device
36 24 Series: Athena (715) pull and Delta pull (717, 718) trim 86 (F)XX-C concealed vertical rods and latches
for rim and vertical device 87 (F)XX-C concealed vertical top latches and plates
37 24 Series: Delta pull (717, 718) trim for concealed devices 88 XX-M mortise exit device
38 24 Series: Delta (718) trim for rim and vertical device 89 F-XX-M mortise exit device
39 24 Series: Delta (718) trim for concealed device 90 (F)XX-M mortise lock
40 24 Series: control pull trim (710) for rim and vertical
device 91 Strikes
41 24 Series: control thumbpiece (710) trim for rim and
vertical device 92 Mullions
42 24 Series: Delta thumbpiece (718) trim for rim and
vertical device
43 24 Series: Delta thumbpiece (718) trim for concealed
device
44 24 Series: turn lever (719) trim for surface vertical device
45 24 Series: turn lever (719) trim for concealed vertical
device
iii Falcon 19, 24, 25 and XX series exit devices service manual
Introduction
Introduction
This manual contains a listing of replaceable parts and assemblies for the 19, 24, 25 and XX Series exit devices. All products
listed meet ANSI A156.3 Grade 1 standards.
How to order
Some parts are sold separately. Other parts are available as part of a kit or multiple quantity package. For the best possible
service when ordering replacement parts or assemblies, please provide the following information:
Part number or assembly number
Description
Quantity needed
Finish desired (available finishes shown below)
619 US15 Satin Nickel Plated, clear-coated 689 SP28 Lacquer Sprayed Aluminum
Fire or
Panic
19
20
11
12 13
14
16
5 1 4122 Sex Bolt, package of 1, includes machine screw, Z\x - 20 x C\v" PPHMS A
Fire or
Panic
30
5
FIRE DEVICE ONLY
28
26
25
11
24
12 13
14
22
16
5 1 4122 Sex Bolt, package of 1, includes machine screw (Z\x - 20 x C\v" PPHMS) A
32
33
39
45 34
35
38
44
36 40
44 41
36
53
37
38 42
43
39
* For Flush Transom applications, specify part number 4215-019 angle bracket
A Specify by finish: US32D or SP28/SP313
19 Series: control trim, knob (911) and lever (912) for rim and vertical
device
911K, 911K-NL, 912L-BE and 912L-NL
g h i or j c
n e
g
b
i d
a 1 986 1Z\v " Mortise Cylinder (US3, US4, US10, US10B, US26, US32, US32D) A
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Knob Projection: 4"
Lever Projection: Dane 2Z\v"
Quantum 3Z\,"
Sutro 2ZC\zn"
Avalon 3Z\v"
19 Series: control trim, knob (911) and lever (912) dummy for rim and
vertical device
911K-DT and 912L-DT
911K-DT 912L-DT
g f
h g h i or j
d
i
d
j
No. Qty. Part no. Description Notes No. Qty. Part no. Description Notes
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Knob Projection: 4"
Lever Projection: Dane 2Z\v"
Quantum 3Z\,"
Sutro 2ZC\zn"
Avalon 3Z\v
918DT 918NL
d
p
a
d
918DT 918NL
a 1 951 Rim Cylinder (US3, US4, US10, US10B, US26, US32, US32D) A
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Projection: 2"
Overall Length: 13"
5 46 49 50
10
No. Qty. Part no. Description Notes No. Qty. Part no. Description Notes
** Sold individually, for center case (2) A Specify by finish: US10B or US26D
*** Sold individually, for surface vertical latches (3) B Specify by finish: US28 or SP313
3
7
6
25
Fire
or
Panic
7
5 4
73 6
36
Fire Device Only
17
36 13
4 1 600305 24 Channel Screw Pkg 10 #10-16 x Z\x" Hex Washer Head Taptite
650234 F-24-R Center Case Kit 2 #10-16 x Z\x" Hex Washer Head Taptite
1 Dogging Key
3
7
6
57
Fire
or
Panic
17
37 13
4 1 600305 24 Channel Screw Pkg 10 #10-16 x Z\x" Hex Washer Head Taptite
37 1 650304 24-V Mounting Pkg 1C\v" - 2Z\v" Door 4 #10 x 1Z\v" PPHSMS *
1 Dogging Key
3
7
6
58
Fire
or
Panic
17
13
4 1 600305 24 Channel Screw Pkg 10 #10-16 x Z\x" Hex Washer Head Taptite
34 Included with C, F-24-C, F-24-CWDC Mounting Packages. For package details, refer to page 26 and page 28
35
A Specify by finish: US3, US4, US10, 313AN, US26, US32, US26D, US32D, US28
B Channel Covers for CD, EA, HWEA, KOR, shown on page 74
32
33
39 37
40
47 37
41
42
44
43
44
45
50
39 37
46
42 38
37 1 650304 24-V Mounting Pkg 1C\v" - 2Z\v" Door 2 #10 x 1Z\v" PPHSMS *
1 Dogging Key *
39 1 650336 24-V Latch Case Cover Screw Pkg 4 #8-32 x Z\v" UFPHMS
60
52 F-24-C
F-24-WDC-90
34b
34b
51 24-C
61
48
34n
34d
34f F-24-WDC-90
41
62 53
34c
63
17 For panic
devices only
34e
34a
50 64
65
34b
67
34 1 650317 F-24-C Mounting Pkg 1C\v" Door 34a 8 #10-24 x C\v" PPHMS
34 1 650318 24-C Mounting Pkg 1C\v" Door 34a 8 #10 x 1Z\v" PPHSMS
650327 F-24-CWDC 90 Minute Mounting Pkg 1C\v" Door 34a 4 #10 x 1Z\v" PPHSMS
650300 24-C Mounting Pkg 2Z\v" Door 34a 8 #10 x 1Z\v" PPHSMS
650346 F-24-C Mounting Pkg 2Z\v" Door 34a 8 #10-24 x 1Z\v" PPHMS
35g
61
54
35d
41
48 55
35n
35h
62
56
17
For panic
35k devices only
63
35c
35a
50
64
66
35b
35 1 650326 24-CWDC Mounting Pkg 1C\v" Door 35a 2 Z\v-20 x C\v" PPHMS A
35 1 650326 24-CWDC Mounting Pkg 1C\v" Door 35g 4 Z\v-20 x C\v" FPHMS A
650327 F-24-CWDC 20 Minute Mounting Pkg 1C\v" Door 35a 2 Z\v-20 x C\v" PPHMS A
650298 24-CWDC Mounting Pkg 2Z\v" Door 35a 2 Z\v-20 x 1Z\v" PPHMS A
24 Series: knob (711) and lever (712) trimrim and vertical device
711K, 711K-BE, 711K-NL, 712L, 712L-BE and 712L-NL
f
a
c
e
g h i j
k m n p q
a 1 986 1Z\v " Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
A Specify by finish: SP28, SP313, US3, US4, US10, US15, US19, US26, US26D, US32, US32D, 643E
B Specify by finish shown
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Knob Projection: 4"
Lever Projection: Dane 2ZB\zn"
Quantum 3C\zn"
Sutro 2ZC\zn"
Avalon 3Z\v"
Danish 2C\v"
Broadway 3Z\,"
Boardwalk 3Z\,"
Latitude 3"
Longitude 3"
e s
c
g h i j
k m n p q
a 1 986 1Z\v " Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
A Specify by finish: SP28, SP313, US3, US4, US10, US15, US19, US26, US26D, US32, US32D, 643E
B Specify by finish shown
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Knob Projection: 4"
Lever Projection: Dane 2ZB\zn"
Quantum 3C\zn"
Sutro 2ZC\zn"
Avalon 3Z\v"
Danish 2C\v"
Broadway 3Z\,"
Boardwalk 3Z\,"
Latitude 3"
Longitude 3"
24 Series: knob (711) and lever (712) dummy trim for rim, vertical and
concealed device
711K-DT and 712L-DT
711K-DT 712L-DT
g h i j
k m n p q
A Specify by finish: SP28, SP313, US3, US4, US10, US15, US19, US26, US26D, 643E
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Knob Projection: 4"
Lever Projection: Dane 2ZB\zn"
Quantum 3C\zn"
Sutro 2ZC\zn"
Avalon 3Z\v"
Danish 2C\v"
Broadway 3Z\,"
Boardwalk 3Z\,"
Latitude 3"
Longitude 3"
24 Series: Athena (715) pull and Delta pull (717, 718) trim for rim and
vertical device
715DT, 717DT and 718DT
d
u
u
d
u 1 600288 717/718/719 Pull Grip Screw package (10 Z\v - 20 x Z\x" Hex Socket Head Cap Screw)
Specifications:
715DT Grip Overall: 1B\," x 9"
715DT Pull: 6Z\v" C - C
715DT Projection: 2Z\v"
Delta Pull Projection: 2"
718DT Escutcheon: 1C\v" x 7Z\v"
718DT Overall Length: 13"
717DT 718DT
u
u t
t
t
u u
u 1 600288 717/718/719 Pull Grip Screw package (10 Z\v - 20 x Z\x" Hex Socket Head Cap Screw)
Specifications:
Delta Pull Projection: 2"
718DT Escutcheon: 1C\v" x 7Z\v"
718DT Overall Length: 13"
a v
w
718C d
a v
w
d
u
718NL u
d
a 1 951 Rim Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
u 1 600288 717/718/719 Pull Grip Screw package (10 Z\v - 20 x Z\x" Hex Socket Head Cap Screw)
Specifications:
Delta Pull Projection: 2"
Escutcheon: 1C\v" x 7Z\v"
Overall Length: 13"
718C t
t
u
718NL t
a 1 985 1Z\," Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
u 1 600288 717/718/719 Pull Grip Screw package (10 Z\v - 20 x Z\x" Hex Socket Head Cap Screw)
Specifications:
Delta Pull Projection: 2"
Escutcheon: 1C\v" x 7Z\v"
Overall Length: 13"
24 Series: control pull trim (710) for rim and vertical device
710-DT and 710-NL
zz
d
w
v a
zz
d
a 1 951 Rim Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
Specifications:
Delta Pull Projection: 2"
Escutcheon: 1C\v" x 7Z\v"
Overall Length: 11C\v"
24 Series: control thumbpiece (710) trim for rim and vertical device
710TP and 710TP-BE
a d
710TP shown
710TP 710TP-BE
a 1 986 1Z\v" Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Projection: 2Z\v"
Overall Length: 11C\v"
24 Series: Delta thumbpiece (718) trim for rim and vertical device
718TP and 718TP-BE
a
d
718TP
d
u
d
718TP shown
718TP-BE
a 1 986 1Z\," Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
u 1 600288 717/718/719 Pull Grip Screw package (10 Z\v - 20 x Z\x" Hex Socket Head Cap Screw)
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Projection: 2"
Overall Length: 13"
a t
718TP
t 718TP shown
718TP-BE
a 1 986 1Z\," Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
u 1 600288 717/718/719 Pull Grip Screw package (10 Z\v - 20 x Z\x" Hex Socket Head Cap Screw)
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Projection: 2"
Overall Length: 13"
719TL 719TL-BE
a d
Rod member
for 719TL, 719TL-BE
24-V devices
a 1 986 1Z\v" Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Projection: 1C\v"
719TL 719TL-BE
a a
719TLP
t
c
t
c
t u
a 1 986 1Z\v" Mortise Cylinder (US3, US4, US10, US10B, US26D, US32, US32D) B
u 1 600288 717/718/719 Pull Grip Screw package of 10 (Z\v - 20 x Z\x" Hex Socket Head Cap Screw)
Specifications:
Escutcheon: 1C\v" x 7Z\v"
Projection: 1C\v"
Overall Length: 13"
2
7
6
20
Fire
or
Panic
7
6
9
11
17
13
661413 25 Channel 4
4 1 600305 25 Channel Screw package of 10 #10-16 x Z\x" Hex Washer Head Taptite
13 1 650191 25 Hex Dogging Kit 3' 1 Panic Channel Cover (3' or 4") A, B
1 Dogging Subassembly
650192 25 Hex Dogging Kit 4' 1 #8-32 x C\," UFPHMS
650240 F-25-R Center Case Kit, Fire 2 #10-16 x Z\x" Hex Washer Head Taptite
1 Tailpiece Guide *
1 Tailpiece Guide *
7
2
6
21
Fire
or
Panic
15
7
11 30
6 33
4
17
33 13
4 1 600305 25 Channel Screw package of 10 10 #10-16 x Z\x" Hex Washer Head Taptite
13 1 650191 25 Hex Dogging Kit 3' 1 Panic Channel Cover (3' or 4") A
1 Dogging Subassembly
650192 25 Hex Dogging Kit 4'
1 #8-32 x C\," UFPHMS
18 1 600308 25-V/M/C Center Case Housing Screw Pkg 2 #8-32 x C\," PPHMS Trilob
19 1 650261 25-V/M/C Center Case Housing Kit 2 #8-32 x C\," PPHMS Trilob
1 Vertical Housing
1Vertical Finger
33 1 650315 25-V Mounting Pkg 1C\v" 2Z\v" Door 6 #10 x 1Z\v" PPHSMS *
1 Dogging Key
36
37
39 33
40
47 33
41
42
44
43
44
45
50
39 33
46
42 38
33 1 650315 25-V Mounting Pkg 1C\v" 2Z\v" Door 4 #10 x 1Z\v" FPHSMS *
1 Dogging Key *
39 1 650336 25-V Latch Case Cover Mounting Pkg 4 #8-32 x Z\v" UFPHMS
7 2
6
Fire 22
or
Panic
15
7
6
31
11
12
8
17
13
4 1 600305 25 Channel Screw package of 10 #10-16 x Z\x" Hex Washer Head Taptite
13 1 650191 25 Hex Dogging Kit 3' 1 Panic Channel Cover (3' or 4') A, B
1 Dogging Subassembly
650192 25 Hex Dogging Kit 4' 1 #8-32 x C\," UFPHMS
15 1 600309 25-V/C Center Case Finger Screw Pkg 2 #10-24 x C\," UFPHMS
18 1 600308 25-V/M/C Center Case Housing Screw Pkg 2 #8-32 x C\," PPHMS Trilob Housing
19 1 650261 25-V/M/C Center Case Housing Kit 2 #8-32 x C\," PPHMS Trilob Housing
1 Vertical Housing
1 Concealed Finger
A Specify by finish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
B Channel Covers for CD, EA, HWEA, KOR, shown on page 72
52 F-25-C
F-25-WDC-90
25-C Panic Device shown
34b
34n
51 25-C
61
48
34n 34d
34f F-25-WDC-90
41
62 53
17
For panic
devices only
34e 34c
63
34a
50
64
65
34b
67
52
35g 35b
35f
48
61
54
35d
35n 55 41
35h
62
56
35e
63
35c
50
35a 64
66
35b
35 1 650299 F-25-CWDC Mounting Pkg 1C\v" Door 35a 8 #10 x 1Z\v" PPHSMS A
650296 25-CWDC Mounting Pkg 2Z\v" Door 35a 8 #10 x 1Z\v" PPHSMS A
7
6
24
23
Fire
or
Panic
7
6
4
11 32 18
29
Fire Device Only 19
15
17
13
4 1 600305 25 Channel Screw package of 10 #10-16 x Z\x" Hex Washer Head Taptite
13 1 650191 25 Hex Dogging Kit 3' 1 Panic Channel Cover (3' or 4') A
1 Dogging Subassembly
650192 25 Hex Dogging Kit 4' 1 #8-32 x C\," UFPHMS
1 Vertical Housing
1 Mortise Finger
1 Tailpiece Guide *
1 Tailpiece Guide *
* Item(s) not shown. B Channel Covers for CD, EA, HWEA, KOR, see page 72
A Specify by finish: US3, US4, US10, US26, US26D, US32, US32D, US28, C Lift Finger ispre-installed on the Slide Bar Assembly. Screws secured
313AN with Loctite .
25 Series trim: lever (510), vandal resistant (vr) lever (511), knob (513)
510L, 510L-BE, 513K, 513K-BE, 511L
r x
s
c
k
c
e b
z d
b a
aa bb cc dd
ee ff gg hh ii
1 Retaining Ring
Specifications:
Escutcheon: 2C\v" x 9C\v"
Knob Projection: 3C\,"
Lever Projection: Dane 2ZC\zn"
Quantum 3Z\x"
Sutro 3ZC\zn"
Avalon 3Z\,"
Danish 2M\,"
Broadway 3Z\v"
Boardwalk 3Z\v
Latitude 3Z\,"
Longitude 3Z\,"
j
h
y
z
a
b
aa bb cc dd
ee ff gg hh ii
1 #10-24 x C\v"PPHMS
1 Retaining Ring
A Specify by finish: SP28, SP313, US3, US4, US10, US15, US19, US26, US26D, US32, US32D, 643E
512TP 512TP-BE
512TP shown
r
s
k
f
m d
t
c a
p
n
jj
q 1 600289 Lower Pull Bracket Pkg 1C\v" Door 1 Lower Pull Bracket A
1 Finish Washer *
600290 Lower Pull Bracket Pkg 2Z\v" Door 1 Lower Pull Bracket
1 Finish Washer *
jj 1 600288 Pull Grip Screw package of 10 1/4-20 x Z\x" Hex Socket Head Cap Screw
Specifications:
Escutcheon: 2C\v" x 16"
Grip: 6Z\v" C-C
Projection: 2ZZ\zn"
512TP-NL 512-DT
r 512TP-NL shown
s
k
g
j
t
a
b
jj
q 1 600289 Lower Pull Bracket Pkg 1C\v" Door 1 Lower Pull Bracket A
1 Finish Washer *
600290 Lower Pull Bracket Pkg 2Z\v" Door 1 Lower Pull Bracket
1 Finish Washer *
jj 1 600288 Pull Grip Screw package of 10 1/4-20 x Z\x" Hex Socket Head Cap Screw
Specifications:
Escutcheon: 2C\v" x 16"
Grip: 6Z\v" C-C
Projection: 2ZZ\zn"
717DT
ee
q 2 600289 Lower Pull Bracket Pkg 1C\v" Door 1 Lower Pull Bracket A
1 Finish Washer *
600290 Lower Pull Bracket Pkg 2Z\v" Door 1 Lower Pull Bracket A
1 Finish Washer *
Specifications:
Grip: 6Z\v"
Projection: 2"
v ff
Fail Safe (unlocks when
power is interrupted)
ff
w
Fail Secure
(locks when power is
interrupted)
u
1 E-Trim Plunger
1 Spirol Pin *
Specifications:
Solenoid rated for continuous duty at 24V DC 0.34 Amps.
Power transfer hinge 2-wire minimum rated 1/2 Amp.
11
12
80
Electric latch retraction
Available on all panic and fire devices. EL can be used with FSA/FSE, DM, LM, AE, and LK features. EL cannot be used with ED, EA,
HWEA or KOR.
81 82
83
Exit alarm
Available on all panic and fire devices. EA can be used with FSA/FSE, DM, LM,
and AE features.
Note: This kit is for new design Exit Alam available as of June 2012. For Exit
Alarm assemblies built prior to June 2012 a replacement Hard Wired Exit Alarm
(HWEA) circuit board is available, part number 650335.
A Specify by finish: US3, US4, US10, 313AN, US26, US26D, US28, US32, US32D
B Specify by finish: SP28, US3, US4, US10, 313AN, US26, US26D, US32D
Key override (KOR), latch monitoring (LM) switch, device monitoring (DM) switch, request to exit (RX) switch
85 86
Key override retrofit Latch monitoring, device monitoring
Not available with 24 Fire Rim devices. Device
Monitoring cannot be used with Latch Monitoring.
Available on all panic and
fire devices.
87
RX switch kit
85 1 25-KOR-K-3 25 Series Key Override (KOR) w/Standard Dogging Kit 3' 1 Channel Cover KOR A
25-KOR-K-4 25 Series Key Override (KOR) w/Standard Dogging Kit 4' 1 KOR Switch Assembly
2 Switch Insulator
2 Switch Insulator
A Specify by finish: US3, US4, US10, 313AN, US26, US26D, US28, US32, US32D
90 92
Rim/mortise shim kit Vertical device shim kit, larger than 8' door
91
Vertical device shim kit, up to 8' door
Cylinder dogging (CD) kit, hex dogging (HD) kit and sexbolts
94 95
Cylinder dogging kit Hex dogging kit
Available on all panic devices. CD kit requires 1Z\," Mortise Cylinder (part
number 985).
Sexbolts
96
97
95 1 650191 25 Series Hex Dogging (HD) Kit 3' 1 Panic Channel Cover A
1 Dogging Subassembly
650192 25 Series Hex Dogging (HD) Kit 4'
1 #8-32 x C\," UFPHMS
650187 24 Series Hex Dogging (HD) Kit 3'
* Sold separately
A Specify by finish: US3, US4, US10, 313AN, US26, US32, US26D, US32D, US28
B Specify by finish: US3, US4, US10, SP313, US32, US32D
Device Trims
25M
24V
24R
25V
24C
25R
25C
510
718
513
719
512
712
511
711
650311 Rod Guide Pkg US32D 6
24/25 Series Maintenance Kit, Part Number 650277-00, includes all parts shown above, with additional parts not shown.
7
19 6
8
15
8
5 7
14
11 13
5
6
1
16
9 5
14
5
4
3
12
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
4
1 1 3747 XX Series Lever Arm LH A 10 1 584 XX Series End Case Assembly
A Specify by finish: SP313, US3, US4, US10, US10B, US26, US26D, US32, US32D
B Specify by finish shown
7
19 6
8
15
8
17 7
5
14
13
5
6
1
16
5
14
5
4
3
12
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
4
1 1 3747 XX Series Lever Arm LH A 9 1 060109 Hex Dogging Key M\cx package
of 10
2 1 3767 XX Series Crossbar A
12 1 3740 XX-R Center Case Cover A
3 1 3746 XX Series Lever Arm RH A
13 1 F570 F570 Strike (US19)
4 2 660025 1/4-20 x Z\x Crossbar
Retaining Screw 14 2 3770 XX-R Main Cam Spring
5 1 600140 Center Case Cover Mtg Pkg 15 1 685 XX R-EO/TP Center Case
(US32D) Assembly - Fire
6 1 650133 F-XX-R Service Mtg Pkg 16 1 3741 XX Series End Case Cover A
7 2 3749 XX Series Lever Arm Axle 17 1 684 XX End Case Assembly - Fire
A Specify by finish: SP313, US3, US4, US10, US26, US26D, US32, US32D
22
34
33
23
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
27
7
19 6
33
8
25
8
5
10
6
7
5 19
9
8
1 8
16 28
5 30
5
4 3
12
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
A A
1 1 3747 XX Lever Arm Left Hand 12 1 3742 XX-V Center Case Cover
A A
2 1 3767 XX Crossbar 16 1 3741 XX Series End Case Cover
A
3 1 3746 XX Lever Arm Right Hand 19 2 610044 XX Axle Support Housing
Assembly
4 2 660025 1/4-20 x Z\x Crossbar Retaining
Screw 24 1 3742 XX Vertical Active Center Case
Cover
5 1 600140 Center Case Cover Mounting
Package (US32D) 25 1 3566 Locking Cam Operator
A Specify by finish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B K/L function only.
7 27
19 6
33
8
25
8
17
5
6
7
5 19
1 8 30
28
16
5
5
4 3
12
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
A Specify by finish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B K/L function only.
A Specify by finish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by finish shown
47 71
26 49
44
43
7
19 6
8
51
8
5
10
7 6
5 19
9
1
16 8
5 53
5
4 3
16
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A 9 1 060109 M\cx Hex Dogging Key
package of 10
2 1 3767 XX Crossbar A
10 1 584 XX Series End Case
3 1 3746 XX Lever Arm Right Hand A
Assembly
4 2 660025 1/4 - 20 x Z\x Crossbar 16 2 3741 XX Series End Case Cover A
Retaining Screw
19 2 610044 XX Axle Support Housing
5 4 600140 Center Case Cover Mounting Assembly
Package
24 1 3742 XX Vertical Active Center
6 1 650318 XX-C Mounting Package Case Cover
7 2 3749 XX Lever Arm Axle 51 1 650263 Finger Kit
8 4 060121 Latch Cover Screw package B 53 1 591 XX-C Active Center Case
of 10 (US4, US10B, US32D) Assembly
A Specify by finish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by finish shown
7 19
6
8
51
8
5
7 19 6
5
1
8
16
5 54
5
4 3
16
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A 8 4 060121 Latch Cover Screw package B
of 10 (US4, US10B, US32D)
2 1 3767 XX Crossbar A
16 2 3741 XX Series End Case Cover - A
3 1 3746 XX Lever Arm Right Hand A Fire
4 2 660025 1/4 - 20 x Z\x Crossbar 19 2 610214 XX Axle Support Housing
Retaining Screw Assembly - Fire
5 4 600140 Center Case Cover Mounting 24 1 3742 XX Vertical Active Center
Package Case Cover
6 1 650317 F-XX-C Mounting Package 51 1 650263 Finger Kit
7 2 3749 XX Lever Arm Axle 54 1 691 F-XX-C Active Center Case
Assembly
A Specify by finish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by finish shown
55
57
52
See page
89 for top
latches and
required plates
56
57
58
See page 89
for required plates
59
64
No. Qty. Part No. Description
57 62 57 63
57
Wood door
Panic device and 20-minute fire device 90-Minute fire device Centerslide mounting plate
39 63 57 63
39 57
5
67
5
65
5
66
69 70
68
70
5 1 4122 Sex Bolt, package of 1, includes machine screw B A Specify by finish: US3, US4, US10, US10B,
(Z\x" - 20 x C\v" PPHMS) (US10B, US26D, BRS) US15, US26, US26D, SP28, SP313
7
19 6
8
5
10
7
5 19
9 6
8
1 8
16
5
72
5
4 3
16
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A 8 4 060121 Latch Cover Screw package B
of 10 (US4, US10B, US32D)
2 1 3767 XX Crossbar A
9 1 2789 Hex Dogging Key M\cx"
3 1 3746 XX Lever Arm Right Hand A
package of 10
4 2 660025 1/4-20 x 1/2 Crossbar
10 1 584 XX End Case Assembly
Retaining Screw
16 2 3741 XX Series End Case Cover A
5 1 650336 Latch Case Cover Mounting B
Package (US4, US10B, 19 2 610044 XX Axle Support Housing
US32D) Assembly
6 1 650137 XX-M Service Mounting 73 1 Mortise Lock - 8500 x A
Package Function x Handing
7 2 3749 XX Lever Arm Axle 75 1 650145 XX-Mortise Center Case LHR
A Specify by finish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by finish shown
Fire
7
19 6
5
18
5 7
19
6
8
1 16
8
5
75
5
4 3
16
2 1 3767 XX Crossbar A
83
95 82
81
94
80
79
78
77 89
76
87
88
85
No. Qty. Part No. Description Notes No. Qty. Part No. Description Notes
Strikes
19, 24, 25 and XX Series device, top and bottom strikes
571
565, 579, 4155 US26D, US4, US10, SP313, US10B, US3, US26
Mullions
4423
10
2
6
3
5
7
2923
1 1 2923 Mullion 2
2 1 060104 Top fitting
5
3 1 060105 Bottom Fitting
9
4 1 4181 Top Fitting Clamp
21/2
11/2
3
5
7
1 1 1 4023 Mullion 12
2 1 1 060102 Bottom
Fitting
3 2 2 709094 3/8" - 16 x
9 7
1Z\v" FPMS
4 2 2 709075 3/8" - 16
Steel Anchor
10
5 6 709118 1/4" - 20 x C\v"
FPHMS
6 4 4051 Stabilizer 8
Block 11
7 1 1 4050 UL Fire Label
(on item #9)
8 1 1 1 1 900549 Cylinder 11
Removable
Mullion Unit
13 1 1 1 1 4988 Adjustment
Shim
(1 shipped
standard)
6
Not 1 1 1 1 4966 Cylinder 5
shown Mounting
Bracket
6
5
2 3
1 1 1 4023 Mullion
2
2 1 1 060106 Top Fitting
5
3 1 1 060102 Bottom Fitting
9
4 1 1 4002 Top Fitting Clamp
10
9
10
9
2 3
3
5 7
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading
brands like CISA, Interflex, LCN, Schlage, SimonsVoss and Von Duprin.
Focusing on security around the door and adjacent areas, Allegion produces a
range of solutions for homes, businesses, schools and other institutions. Allegion
is a $2 billion company, with products sold in almost 130 countries.
2016 Allegion
108004, Rev. 12/16
www.allegion.com/us