Documente Academic
Documente Profesional
Documente Cultură
NOTE: This article and all content are provided on an "as is" basis without any warranties of any kind,
whether express or implied, including, but not limited to the implied warranties of merchantability, fitness
for a particular purpose, and non-infringement. In no event shall Wonderware North be liable for any
special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or
profits, whether in an action of contract, negligence or other tortuous action, arising out of or in
connection with the use or performance of information contained in this article.
Purpose:
Once a Managed InTouch application is created, how can you rename the application so a different name appears within
the InTouch Application Manager? The purpose of this Tech Tip is to walk you through the steps required to rename the
Managed InTouch Application in all the locations the name can be used. For example, the name of the InTouch application
is used in three separate locations:
Figure 1 Figure 2
Figure 3
Figure 4
2. In order to rename the Instance, the Instance must first be undeployed. Once undeployed, rename the Instance
following the same steps as in #1 above. In this example, we will change the name of the InTouch application from
$Palletizer_Bottle_001 to $Palletizer_Package_001.
Figure 5
Once the Instance is renamed, the application can be deployed again. The current problem, even though the Template
and Instance was renamed, the name will still display the original name of $Palletizer_Bottle, as shown in Figure 3
above, if the InTouch Application Manager is opened. Renaming the Template and Instance does not have any affect on
the name within InTouch Application Manager.
Figure 6
4. Now that the application is checked out, right click the template again, however this time select Application
Information. This will open the dialog box for the actual properties of the InTouch application.
Figure 7
In this dialog box, the Name and the Description can be changed. In our example we replaced Bottle with Package in
both the Name and Description fields.
6. InTouch Application Manager will now display the changed name of $Palletizer_Package.
Figure 8