Documente Academic
Documente Profesional
Documente Cultură
2) Also indicate if the FAI is complete per Section 5.4: FAI complete FAI not Complete
FAI
FAI Status: FAI Pending FAI Rejected
Acceptable
5. Material or Process 5a. Customer requirement 6. Specification Number & 7. Code 8. Special Process 9. Customer 10. Certificate of
Name Revision No. Supplier Code Approval Conformance
Verification number
(Yes/No/NA)
No Results Found No Results Found
13. Comments
14. Prepared By 15. Date
3 Length 60 mm NA NA
7 Length 30 mm NA NA
8 Length 12 mm NA NA
9 Length 60 mm NA NA
14 Length 26 mm NA NA
17 Radial R3 mm NA NA
20 Radial mm NA NA
R10
21 Radial mm 15.001 14.998
R 15
22 Radial mm 8.001 7.998
R8
Blanket statements of conformance are unacceptable for any test results.
http://www.inspectionxpert.com
Signature:_______________________________Title:__________________________ Date:_______________
Sheet 5 of 11
Form 3: Characteristic Accountability, Verification and Compatibility Evaluation
1. Part Number 2. Part Name
123 BODY
25 Length 28 mm NA NA
44 Length 40 mm NA NA
THRU.
ON 120 PCD EQ SP
OFF CENTER LINE
64 Angular 45 deg 45.1 44.9
THRU
ON 135 PCD.EQ.SP
OFF CENTER LINE
67 Angular 45 deg 45.1 44.9
The signature indicates that all characteristics are accounted for; meet drawing requirements or are properly documented for disposition.
12. Prepared By
13. Date