Sunteți pe pagina 1din 7

Leica Geosystems

How to use Leica mySecurity

Leica Geosystems AG
Heinrich-Wild-Strasse
CH-9435 Heerbrugg
Schweiz
How to use mySecurity www.leica-geosystems.com
1. Getting Started
mySecurity is a unique cloud-based theft protection provided by Leica Geosystems.
mySecurity gives you total peace of mind if your instrument is ever stolen. A locking mechanism is
available to ensure that the device is disabled and can no longer be used.

All Flexline users can activate this feature within the Leica customer portal - myWorld. mySecurity is
supported with on board firmware version 3.01 or higher.

Flexline & FlexLine plus units can be protected with mySecurity. However please note that the
protection level for Flexline, is not as high as with FlexLine plus units, as it is possible to load older
firmware that mySecurity does not support. On FlexLine plus total stations it is not possible to upload
older firmware versions than 3.01

2. mySecurity main screen

Once in myWorld, go to myTrusted Services / mySecurity.

For each product available on the list, Activation & Renewal date is displayed, and Stolen status, in case
of the instrument has been flagged as stolen.

2/7
Press to add a new product to mySecurity.

Press to delete one product from mySecurity.

Only products that are available in myWorld myProducts can be added to mySecurity, so be sure to add
products to myProducts before using mySecurity.

Click OK to accept.

3. Activating mySecurity

Click the checkbox on selected instrument, and press

After pressing the Details button, next screen will be displayed:

3/7
In section mySecurity, Status is disabled. To activate it, the user must define a connection interval to
myWorld e.g. every 3, 6 or 12 months.

If the instrument is not connected on time (or before) the instrument gets blocked and cannot be used
anymore unless it is connected to myWorld to repeat this procedure to set a new mySecurity renewal
date.

Press once mySecurity renewal has been selected.

An installation program may be downloaded and installed on your computer automatically.

The software, automatically scans all the connection ports, in order to detect which port the
instrument is connected.

Users can manually scan, in case the automatic scan is not successful, pressing Scan button.

Connection settings can be selected by user, or set it by default, pressing Defaults button.

4/7
After pressing Connect, picture below will be displayed.

Additionally, an information message will be displayed on the FlexLine TPS.


mySecurity protection has been enabled/extended. New end date: dd.mm.yyyy

Press Close. Automatically the program will lead us to overview screen.


Press button to update mySecurity information.

Now, mySecurity is Active. Please note Activation Date and Next Renewal status.
At any moment, mySecurity can be deactivated, by pressing

5/7
4. Flexline Status Info
On Flexline, go to Tools Info Page 4 to check mySecurity Renewal Date.

Highlighted in red indicates end date, transferred by MyWorld according to the settings, made within the
online portal.

During start up, a certain time before the renewal date is due, next message will pop up:

When number of remaining days has been exceeded, next message will pop up:

6/7
5. Report as Stolen
In mySecurity, an instrument can be reported as Stolen.

After pressing the Report as Stolen button, a warning will pop up to confirm device as stolen.

If accept, instrument status changes to Stolen!.

After reporting as stolen, if the instrument is ever brought into an Authorised Leica Service Centre it will
be known that it is stolen, and the local Authorities will be informed.

7/7

S-ar putea să vă placă și