Documente Academic
Documente Profesional
Documente Cultură
SpIprobe 14U
GeoProbe
NETSCOUT
3033 W President George Bush Highway
Plano, Texas 75075
+1 469-330-4000 (voice)
www.netscout.com Web site
The products and specifications, configurations, and other technical information regarding the services described or referenced
in this document are subject to change without notice. All statements, technical information, and recommendations contained in
this document are believed to be accurate and reliable but are presented as is without warranty of any kind, express or
implied. Users must take full responsibility for their application of any products specified in this document. NETSCOUT makes
no implied warranties of merchantability or fitness for a purpose as a result of this document or the information described or
referenced within, and all other warranties, express or implied, are excluded.
Except where otherwise indicated, the information contained in this document represents the planned capabilities and intended
functionality offered by the product and version number identified on the front of this document. Screen images depicted in this
document are representative and intended to serve as example images only. Wherever possible, actual screen images are
included.
1 AP2000 Application Processing
Blades
1.1 Logical Processing
A 14U Application Processor Blade has three possible functions:
Link Processing
Application Processing
Most all blades are compatible with both the CC2000 and CC1000 chassis models, with a few
exceptions.
No disk
Figure 1.1 shows the AP2000 with the HD-1200 AMC installed.
SAS
Connector
Health Gb Ethernet
LED Port F
Drive
Activity
LED Fiber
Channel
LEDs
Serial Port
Connector
USB Connector
Hot Swap
LED
Top View
Front Panel
The Application Processor Blade has several front panel LEDs for reporting the boards status.
Table 1.2 shows the LED indicators for the AP2000 blade.
OFF In service
GREEN No errors
RJ-45 connections
OFF 10 Mbps
The serial debug port for the AP2000, accessible on the front panel, is an 8-pin modular RJ-45
jack. The serial port operates at 9600 baud with eight data bits, no parity and one stop bit.
This section describes the components available for the AP2000 blade.