Documente Academic
Documente Profesional
Documente Cultură
Reference Guide
Version 2012
February 2012
DISO-PE-200016A
Copyright
Copyright 1991-2012 Alias Limited. All rights reserved.
Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains confidential and proprietary information of
Intergraph and/or third parties which is protected by copyright law, trade secret law, and international treaty, and may not be provided or otherwise made available without proper
authorization from Alias Limited.
U.S. Government Restricted Rights Legend
Use, duplication, or disclosure by the government is subject to restrictions as set forth below. For civilian agencies: This was developed at private expense and is "restricted computer
software" submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial Computer Software - Restricted Rights clause at 52.227-19 of the
Federal Acquisition Regulations ("FAR") and its successors, and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of
Defense ("DoD"): This is "commercial computer software" as defined at DFARS 252.227-7014 and the rights of the Government are as specified at DFARS 227.7202-3.
Unpublished - rights reserved under the copyright laws of the United States.
Alias Limited
1 Stuart Road, Manor Park
Runcorn, Cheshire
WA7 1TS
United Kingdom
Telephone: +44 (0) 1928 579311
Fax: +44 (0) 1928 579389
Email: info@alias.ltd.uk
Terms of Use
It is the policy of Alias Limited to enforce any and all rights relating to protection of this information. The information contained in this manual is proprietary in nature and may not be
reproduced, copied or divulged in whole or in part without the prior written consent of Alias Limited. This manual has been provided pursuant to the terms of a contract or confidentiality
agreement. Unauthorized distribution or disclosure of its contents is a violation of that contract or agreement and persons doing so may be liable for penalties as provided by law.
Warranties and Liabilities
All warranties given by Alias Limited about equipment or software are set forth in the EULA provided with the software or applicable license for the software product signed by Alias
Limited, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such warranties. Alias Limited believes the
information in this publication is accurate as of its publication date.
The information and the software discussed in this document are subject to change without notice and are subject to applicable technical product descriptions. Alias Limited is not
responsible for any error that may appear in this document.
The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of this license. No responsibility is assumed by
Alias Limited for the use or reliability of software on equipment that is not supplied by Intergraph or its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO
MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT.
Alias Limited is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data. Users should verify for themselves that the data is
accurate and suitable for their project work.
Trademarks
ISOGEN and SPOOLGEN are registered trademarks of Alias Limited. All other brands and product names are trademarks of their respective owners.
Contents
Preface ............................................................................................................................................................................................................ 5
Introduction .................................................................................................................................................................................................... 7
Flanges and Balled Joints ......................................................................................................................................................................... 9
LSJE-Type Flanges ................................................................................................................................................................................. 12
Hygienic Fittings ...................................................................................................................................................................................... 13
Miscellaneous Pipe Components ............................................................................................................................................................ 19
Miscellaneous Items ................................................................................................................................................................................ 22
Penetration Plate Items ........................................................................................................................................................................... 23
Nozzles .................................................................................................................................................................................................... 24
Inline Filters ............................................................................................................................................................................................. 25
Instruments .............................................................................................................................................................................................. 26
Pipe Blocks .............................................................................................................................................................................................. 31
Vents ........................................................................................................................................................................................................ 32
Traps ........................................................................................................................................................................................................ 33
Welds ....................................................................................................................................................................................................... 34
Symbol Coupling...................................................................................................................................................................................... 38
Elbows and Bends ................................................................................................................................................................................... 40
Couplings ................................................................................................................................................................................................. 51
Caps ........................................................................................................................................................................................................ 54
Crosses .................................................................................................................................................................................................... 55
Fixed Length Pipes .................................................................................................................................................................................. 57
Spindles ................................................................................................................................................................................................... 59
Tees ......................................................................................................................................................................................................... 62
Reducers ................................................................................................................................................................................................. 67
Supports .................................................................................................................................................................................................. 74
Unions ...................................................................................................................................................................................................... 76
Olets ........................................................................................................................................................................................................ 77
Valves ...................................................................................................................................................................................................... 79
Three-Way Valves ............................................................................................................................................................................. 82
Valves - 4-Way .................................................................................................................................................................................. 83
Clamped Joints ........................................................................................................................................................................................ 84
Liners (Connectors) ................................................................................................................................................................................. 85
Index .............................................................................................................................................................................................................. 86
Introduction
All components generated by ISOGEN are defined by a unique code called a symbol key (SKEY). SKEYs contain 2-4 characters; the first two
characters define the type of component, and the last two characters define the end type, such as flanged, butt welded, or screwed. You can
specify an appropriate end condition by replacing the ** characters in the SKEY with one of the sets of characters from the table below.
SKEY Characters End Condition
BW Butt Weld
CP Compression
SW Socket Weld
FL Flanged
SC Screwed
PL Plain End
LN Liner Nut
LC Liner / Clamp
LR Reducing Liner / Nut
MP Male Part
PF Push Fit
GL Glued
CL Clamped
FA Flared
To denote the number of segments, replace the At sign (@) in the SKEY with an integer value in the range 1 to 9, inclusive. Currently,
regardless of the value assigned to the At sign, the software draws the symbol according to the SKEY plotted isometric shape.
To denote the bend radius, replace the Plus sign (+) in the SKEY with an integer value in the range 1 to 9, inclusive.
FLANGE-
Reducing concentric flange FLRC Yes REDUCING- 65/0
CONCENTRIC
FLANGE-
Reducing eccentric flange FLRE Yes REDUCING- 65/0
ECCENTRIC
Lap joint ring/Stub end combined flange FBSE Yes FLANGE 105
LSJE-Type Flanges
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Hygienic Fittings
Plotted User Flow Arrow / PCF IDF
Description SKEY Shape
Isometric Shape Definable Flow Dependency Identification Record
85/0/86/87/
4 port single level valve (Z) 4Z** Yes No/No VALVE-4WAY
88
85/0/
4 port single level valve (D) 4D** Yes No/No VALVE-4WAY 86/87/
88
75/76/80/0/
Multi-port dual level valve with VALVE- 81/82
MD** Yes No/No
D spindle MULTIWAY 85/0/86/87/
88
75/76
80/0/
Multi-port dual level valve with VALVE- 81/82
MZ** Yes No/No
Z spindle MULTIWAY 85/0/
86/87/
88
80/0/
3-way check valve K3** Yes No / No VALVE-3WAY
81/82
MISC-
Block angle BA** Yes No / No COMPONENT- 95/96
ANGLE
MISC-
Expansion bellows EX** Yes Yes / No 95/96
COMPONENT
MISC-
Flame trap FT** Yes Yes / No 95/96
COMPONENT
MISC-
Flexible hose FX** Yes Yes / No 95/96
COMPONENT
MISC-
Hose coupling CH** Yes No / No 95/96
COMPONENT
MISC-
Non-category item NC** Yes No / No 95/96
COMPONENT
MISC-
Block offset BO** Yes Yes / No COMPONENT- 95/96
OFFSET
MISC-
Block return BR** Yes Yes / No COMPONENT- 95/96
RETURN
MISC-
Plug PL Yes No / No 95/96
COMPONENT
MISC-
Restrictor plate RP Yes Yes / No
COMPONENT 95/96
REINFORCEMEN
Reinforcing pad RPAD Yes No / No
T PAD NONE
MISC-
Sight glass SG** Yes Yes / No
COMPONENT 95/96
MISC-
Slip plate SP Yes No / No
COMPONENT 95/96
MISC-
Slip ring SR Yes No / No
COMPONENT 95/96
MISC-
Spectacle blind (closed) SB Yes No / No 95/96
COMPONENT
MISC-
Spectacle blind (open) OB Yes No / No 95/96
COMPONENT
MISC-
Tundish (funnel) TU** Yes Yes / Yes 95/96
COMPONENT
Miscellaneous Items
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
INSULATION-
Insulation symbol INPP Yes 149
SYMBOL
No 149
Location point LOPT LOCATION-POINT
MISC-
Locating pin LPIN Yes 95/96
COMPONENT
Nozzles
Plotted User PCF
Description SKEY Shape IDF Record
Isometric Shape Definable Identification
Inline Filters
Plotted
User Flow Arrow / PCF IDF
Description SKEY Shape Isometric
Definable Flow Dependency Identification Record
Shape
Instruments
Plotted User Flow Arrow / PCF IDF
Description SKEY Shape
Isometric Shape Definable Flow Dependency Identification Record
INSTRUMENT-
Instrument angle IA** Yes No / No 90/93
ANGLE
INSTRUMENT-
Instrument offset IO** Yes Yes / No 90/93
OFFSET
INSTRUMENT-
Instrument return IR** Yes Yes / No 90/93
RETURN
INSTRUMENT-
Instrument dial IDPL N/A No No / No 90
DIAL
INSTRUMENT-
Instrument dial (flanged) IDFL N/A No No / No 90
DIAL
INSTRUMENT-
3-way control valve C3** Yes No / No 90/0/91/93
3WAY
INSTRUMENT- 90/0/
4-way control valve C4** Yes No / No
4WAY 91/92/93
INSTRUMENT-
Angled control valve CA** Yes No / No 90/93
ANGLE
Pipe Blocks
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
PIPE-BLOCK-
Variable length pipe block PV YES 103
VARIABLE
Vents
Plotted User Flow Arrow / PCF IDF
Description SKEY Shape
Isometric Shape Definable Flow Dependency Identification Record
Traps
Plotted User Flow Arrow/ PCF IDF
Description SKEY Shape
Isometric Shape Definable Flow Dependency Identification Record
Welds
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Tack for offshore field fit weld WOFT Yes WELD 120
Site socket/screwed
XX N/A No WELD 120
compression weld
Site socket/screwed
XXD N/A No WELD 120
compression dotted weld
Symbol Coupling
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Compression elbow
ELCP N/A No ELBOW 35/36
(90 and 45)
Screwed elbow
with Female ends ELSC N/A No ELBOW 35/36
(90 and 45)
Screwed elbow
with Male ends EBSC N/A No ELBOW 35/36
(90 and 45)
Mitre tee bend with plain ends MTPL N/A No BEND-TEED 70/0/71/72
Flanged bend
BEFL N/A No BEND 30/31
(All angles)
The ends on the following elbow and bend components can be individually designated MALE or FEMALE.
Teed elbow
ETGL N/A Ends only ELBOW-TEED 70/71/72
with glued end connections
Teed elbow
ETPF N/A Ends only EBOW-TEED 70/71/72
with push fit end connections
Couplings
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Caps
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Crosses
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
50/0/51/
Cross CR** N/A No CROSS
52/53
CROSS-SET-ON or 50/0/51/
Set-on cross CRSO N/A No
CROSS-STUB 52/53
CROSS-SET-ON or 50/0/51/
Set-on reinforced cross CRRF N/A No
CROSS-STUB 52/53
CROSS-SET-ON or 50/0/51/
Stub in cross CSSO N/A No
CROSS-STUB 52/53
CROSS-SET-ON or 50/0/51/
Stub in reinforced cross CSRF N/A No
CROSS-STUB 52/53
The ends on the following cross components can be individually designated as MALE or FEMALE.
The ends on the following fixed length pipe components can be individually designated MALE or FEMALE.
Spindles
User
Description SKEY Shape PCF Identification IDF Record
Definable
User
Description SKEY Shape PCF Identification IDF Record
Definable
User
Description SKEY Shape PCF Identification IDF Record
Definable
Tees
Plotted User PCF
Description SKEY SHAPE IDF Record
Isometric Shape Definable Identification
TEE-SET-ON or
Set-on tee TESO No 45/0/46/47
TEE-STUB
TEE-SET-ON or
Set-on reinforced tee TERF No 45/0/46/47
TEE-STUB
TEE-SET-ON or
Stub in tee TSSO No 45/0/4/47
TEE-STUB
TEE-SET-ON or
Stub in reinforced tee TSRF No 45/0/46/47
TEE-STUB
The ends on the following tee components can be individually designated as MALE or FEMALE.
SKEYs YLRG, YMED, and YSML are used with Y-Type Tees / Crosses.
Y-type tee (Large) YLRG See Y-type tee/cross Yes See Y-type tee/cross
Y-type tee (Small) YSML See Y-type tee/cross Yes See Y-type tee/cross
Uses YSML,
Y-type tee TY** Yes TEE 45/0/46/47
YMED or YLRG
Reducers
Plotted User Flow Arrow / PCF IDF
Description SKEY Shape
Isometric Shape Definable Flow Dependency Identification Record
REDUCER-
Concentric reducer RC** Yes No / No 55/0
CONCENTRIC
REDUCER-
Concentric reducer
CTBW Yes No / No CONCENTRIC- 60/0/61/62
(Butt weld with a connection)
TEED
REDUCER-
Concentric reducer (Swaged
CXBW Yes No / No CONCENTRIC- 60/0/61/62
from pipe with a connection)
TEED
Concentric reducer
REDUCER-
(Fabricated from plate - CPFL Yes No / No 55/0
CONCENTRIC
flanged)
REDUCER-
Concentric reducer (Flanged
CTFL Yes No / No CONCENTRIC- 60/0/61/62
with a connection)
TEED
REDUCER-
Concentric reducer (Screwed
CTSC Yes No / No CONCENTRIC- 60/0/61/62
with a connection)
TEED
REDUCER-
Eccentric reducer RE** Yes No / No 55/0
ECCENTRIC
REDUCER-
Eccentric reducer
OTBW Yes No / No ECCENTRIC- 60/0/61/62
(Butt weld with a connection)
TEED
REDUCER-
Eccentric reducer
OTSC Yes No / No ECCENTRIC- 60/0/61/62
(Screwed with a connection)
TEED
REDUCER-
Eccentric reducer
OTFL Yes No / N o ECCENTRIC- 60/0/61/62
(Flanged with a connection)
TEED
REDUCER-
Reducing block RFPL Yes Yes / No 55/0
CONCENTRIC
REDUCER-
Concentric teed reducer with
CTFA N/A Yes No / No CONCENTRIC- 60/0/61/62
flared end connections
TEED
REDUCER-
Concentric teed reducer with
CTCL N/A Yes No / No CONCENTRIC- 60/0/61/62
clamped end connections
TEED
REDUCER-
Eccentric teed reducer with
OTFA N/A Yes No / No CONCENTRIC- 60/0/61/62
flared end connections
TEED
REDUCER-
Eccentric teed reducer with
OTCL N/A Yes No / No CONCENTRIC- 60/0/61/62
clamped end connections
TEED
The ends on the following cross components can be individually designated as MALE or FEMALE.
REDUCER- 60/0/61/62
Eccentric teed reducer with
OTGL N/A Yes No / No CONCENTRIC-
glued end connections
TEED
REDUCER-
Eccentric teed reducer with
OTPF N/A Yes No / No CONCENTRIC- 60/0/61/62
push fit end connections
TEED
REDUCER-
Concentric teed reducer with
CTGL N/A Yes No / No CONCENTRIC- 60/0/61/62
glued end connections
TEED
REDUCER-
Concentric teed reducer with
CTPF N/A Yes No / No CONCENTRIC- 60/0/61/62
push fit end connections
TEED
Supports
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
01HG
Hanger/Support Yes SUPPORT 150
(or Blank)
Unions
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Olets
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Valves
Plotted User Flow Arrow / PCF IDF
Description SKEY Shape
Isometric Shape Definable Flow Dependency Identification Record
Three-Way Valves
Plotted Isometric User PCF IDF
Description SKEY Shape
Shape Definable Identification Record
80/0/81/
Three-way valve V3** Yes VALVE-3WAY
82/83
Valves - 4-Way
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Clamped Joints
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Liners (Connectors)
Plotted User PCF IDF
Description SKEY Shape
Isometric Shape Definable Identification Record
Grayloc socket weld connector LNSW N/A N/A N/A N/A N/A
Grayloc (Female) screwed connector LNSC N/A N/A N/A N/A N/A
Victaulic - Welded ring type (Number
of welds set by Option Switch 77 LVBW N/A N/A N/A N/A N/A
Position 7)