Documente Academic
Documente Profesional
Documente Cultură
HSO 0600G
PROPER SHIPPING NAME: CORROSIVE LIQUID, FLAMMABLE, N.O.S. (amine compound, light
aromatic naphtha)
TDG CLASSIFICATION: 8 (3)
UN NUMBER (PIN): UN2920
PACKING GROUP: II
HSO 0600G 1
MATERIAL SAFETY DATA SHEET
HSO 0600G
SKIN CONTACT: Wash with soap and water for 20-60 minutes. Remove contaminated
clothing. Seek medical attention.
EYE CONTACT: Flush with gently flowing warm water for 20-60 minutes, or until irritation
ceases. Obtain medical attention when flushing period is completed.
INGESTION: Wash out mouth with water. Do not induce vomiting unless directed to
do so by medical personnel. If spontaneous vomiting occurs keep head
below hips to prevent aspiration. Obtain immediate medical attention.
Never give anything by mouth if patient is unconscious, rapidly losing
consciousness or convulsing.
INHALATION: Move patient to fresh air. Apply oxygen or artificial respiration if
required. Obtain immediate medical attention.
HSO 0600G 2
MATERIAL SAFETY DATA SHEET
HSO 0600G
HSO 0600G 3
MATERIAL SAFETY DATA SHEET
HSO 0600G
Put on appropriate personal protective equipment. Eating, drinking and smoking should be prohibited
in areas where this material is handled, stored and processed. Workers should wash hands and face
before eating, drinking and smoking. Do not get in eyes or on skin or clothing. Do not breathe vapor
or mist. Do not ingest. Use only with adequate ventilation. Store and use away from heat, sparks,
open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and
material handling) equipment. Use non-sparking tools. Take precautionary measures against
electrostatic discharges. To avoid fire or explosion, dissipate static electricity during transfer by
grounding and bonding containers and equipment before transferring material. Empty containers
retain product residue and can be hazardous. Do not reuse container. Store in accordance with local
regulations. Store in a segregated and approved area. Store in a dry, cool and well-ventilated area,
away from incompatible materials. Eliminate all ignition sources. Separate from oxidizing materials.
Keep container tightly closed and sealed until ready for use. Containers that have been opened must
be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use
appropriate containment to avoid environmental contamination.
Use appropriate safety equipment. Eliminate ignition sources. Evacuate spill area of nonessential
personnel. Stop leak if possible to do so without risk. Soak up small spills with absorbent materials.
Dike large spills to prevent water pollution. Collect uncontaminated material for repackaging. Collect
contaminated material and absorbents in approved containers for disposal. Notify authorities of any
reportable spills.
Dispose in accordance with federal, provincial and local regulations. Dispose of surplus and non-
recyclable products via a licensed waste disposal contractor. It is the responsibility of the user to
determine if material meets the criteria of hazardous waste at the time of disposal. Empty containers
must be disposed of, or recycled, in accordance with local regulations.
The information contains herein is given in good faith, but no warranty, expressed or implied, is made.
HSO 0600G 4