Documente Academic
Documente Profesional
Documente Cultură
for
AS 1418.1-2002/Amdt 1-2004 Cranes, hoists and winches - General requirements
Licence Agreement
This is an agreement between the end user of the Product ("Licensee") and SAI Global Limited, 286 Sussex Street, Sydney
NSW 2000 AUSTRALIA, ABN 67 050 611 642.
Australian Standards means Australian Standards and includes Joint ISO/Australian Standards, Joint NZ/Australian Standards,
current Draft Australian Standards, and amendments to Australian Standards.
Concurrent Users means the maximum number of people able to access the Product at any one time, and is limited to the
number of Licences purchased.
ISO Standards means Standards published by the International Organization for Standardization (ISO), for which SAI Global is
an authorised distributor.
IEC Standards means Standards published by the International Electrotechnical Commission (IEC), for which SAI Global is an
authorised distributor.
Internal use means use of the Product within the Licensees organization.
Product means Australian Standards, ISO Standards and IEC Standards ordered and purchased through the InfoStore, and
downloaded as electronic PDF files.
Click on the red box above to activate the Licence Agreement scroll bar.
2. Product Availability
See publications
2.1. The Product is available via the World covering the same
Wide Web through Subject
the use of a web Area
browser. Documents are provided as PDF files,
viewable through the use of Adobe Acrobat Reader Version 7 and above.
Subscribe to our Free Newsletters about Australian Standards in
3. Licence Agreement
Legislation; ISO, IEC, BSI and more
Learn
3.1. By using the Product thehow to Manage
Licensee Standards
agrees to be bound by theCollections Online
Licence Agreement for the Product.
3.3.b. Purchasers of network Licences for the Product may install and use the Product on a network with the number of
Concurrent Users permitted corresponding to the number of users specified in the SAI Global Infostore order. Licensees are
permitted to make paper copies of the Product for Internal use limited to the number of network users specified in the SAI Global
Infostore order only. Licensees are permitted to make one electronic copy of the Product for backup purposes.
3.4. SAI Global will not in any way provide the Licensee with an updating service for the Product. The Licensee agrees that SAI
AS 1418.1/Amdt 1/2004-11-04
STANDARDS AUSTRALIA
Licensed to Mr. Khan Amir Younus Kamal on 17 November 2011. 1 user personal user licence only. Storage, distribution or use on network prohibited (10255900).
Amendment No. 1
to
AS 1418.12002
Cranes, hoists and winches
Part 1: General requirements
REVISED TEXT
The 2002 edition of AS 1418.1 is amended as follows; the amendment(s) should be inserted in the appropriate
place(s).
SUMMARY: This Amendment applies to Clauses 1.2, 2.1, 7.12.8.7, 7.16.1, 7.20.3.6, 7.20.6.4, 7.20.6.5 and
13.4(new), and Appendix L.
Published on 4 November 2004.
AMDT
Page 12 Clause 2.1, NOTE 1
No. 1
NOV Delete the existing Clause reference Clause 1.5.1 and replace with Clause 1.4.1.
2004
AMDT
Page 61 Clause 7.16.1
No. 1
NOV 1 First paragraph, second line, delete the words Table 7.15 or.
2004
2 Second paragraph, delete the second sentence.
AMDT
Page 72 Clause 7.20.3.6
No. 1
NOV 1 Delete the existing Equation and replace with the following:
2004
TF N = minimum worn flange thickness
6M F
Ft X
AMDT
Page 77 Clause 7.20.6.4
No. 1
NOV Delete Equation 7.20.6.4(2) and replace with the following:
2004
PTS = 0.0049 DW BTE C p . . . 7.20.6.4(2)
AMDT
Page 126 Clause 13.4 (New)
No. 1
NOV Add a new Clause 13.4 as follows:
2004
13.4 COMMISSIONING
Cranes shall be erected, or installed, and commissioned in accordance with the
specifications of the designer and manufacturer.
AMDT
Page 161 Appendix L, Paragraph L2
No. 1
NOV Line 4, delete the variable H G and replace with h g .
2004
AMDT
Page 162 Appendix L, Paragraph L2
No. 1
NOV Lines 4 and 6, delete the existing H G and replace with h g .
2004
AMDT
Page 163 Equation L6(1)
No. 1
NOV Delete the existing equation and replace with the following:
2004
4 D
f cmn = K 3 DM f cm
3 DRO . . . L6(1)
Fc
AMDT
Page 169 Figure L3, NOTE
No. 1
NOV Delete the existing NOTE and replace with the following:
2004
NOTE: Where the value of ERC is not known and is not readily obtainable, the following values may be assumed:
E RC = 250 for ropes with wire-rope core (WRC) or wire-strand core (WSC)
E RC = 125 for ropes with fibre core (FC)