Documente Academic
Documente Profesional
Documente Cultură
PRE OPERATIONS:
POST OPERATIONS:
2. Blow low pressure air on the Servo motors back side heat eliminating
fans and Hyd. Oil chiller fans areas.
3. Keep the machines Neat and Clean the inner and outer areas weekly
holidays or Idle time.
4. Remove the Tramp oil (lub oil,grease &Hyd. Oil) from the Coolant tanks
with help of Air Skimmer by weekly holidays or Idle time.
6. Greasing the Pallet pull & pushing Chains and Quill Spindle
bearing areas.
3. Check for the backlash in axis drives and adjust if required with
help of machine builders service Engineers.