Documente Academic
Documente Profesional
Documente Cultură
Open a
command prompt window, run netstat -an command and record the related SYN_SENT or
ESTABLISHED state http connection.
(5 marks)
7. Open a command prompt window. Run a ftp ftp.jaring.my command. Open another
command prompt window and run netstat –an and record the related ESTABLISHED ftp
connection.
(5 marks)
Proto Local IP address Local port address Foreign IP address Foreign port address
TCP 127.0.0.1 :5354 127.0.0.1 :49157
TCP 127.0.0.1 :5354 127.0.0.1 :49158
TCP 127.0.0.1 :27015 127.0.0.1 :52017
TCP 127.0.0.1 :49157 127.0.0.1 :5354
TCP 127.0.0.1 :49158 127.0.0.1 :5354
TCP 127.0.0.1 :49160 127.0.0.1 :65001
TCP 127.0.0.1 :52017 127.0.0.1 :27015
TCP 127.0.0.1 :65001 127.0.0.1 :49160
TCP 192.168.231.226 :52315 111.221.29.125 :443
TCP 192.168.231.226 :52693 111.221.29.122 :443
TCP 192.168.231.226 :52813 212.4.153.168 :443
TCP 192.168.231.226 :53247 23.51.58.18 :443
TCP 192.168.231.226 :53248 131.253.14.230 :443
Physical address:
IP address:
A numerical label assigned to each device connected to a computer network that uses
the Internet Protocol for communication that serves two principal functions: host or network
interface identification and location addressing.
Port address:
(3 marks)
(2 marks)
10. Run arp –a command. Record their IP address and corresponding physical address.
(2 marks)
11. What is the physical address of the default gateway (router) of your computer?
(1 mark)
A protocol for mapping an Internet Protocol address (IP address) to a physical machine
address that is recognized in the local network.
13. What is the purpose of ping command?
(1 mark)
14. Run tracert to the following address and list down the routers that the packets have to travel
to reach the destination
a. www.perlis.uitm.edu.my
c. www.pahang.uitm.edu.my
d. www.sarawak.uitm.edu.my.
(5 marks)
a.
b.
c.
d.
e.
15. Draw the router topology diagram based on the tracert output.
(5 marks)
In conclusion, this assignment produced a benefits of recognizing and identify different
type of addresses. Moreover, learn how does the output produced in such way because of the
difference purpose for each command. Besides, by reading the routers packets that have to
travel to reach a destination could help to improvise the ability to detect more efficiently. The
problems in this assignment is how to recognize the routers packets in which output could
identify which topology of every each command made. So that, enhance the topic into the
syllabus, it might give a help a lot to gain a knowledge.