Documente Academic
Documente Profesional
Documente Cultură
Ads by Google
Steel Metal
Military
to Metals
to Basic processes in metals
Solidification
Dr. Dmitri Kopeliovich
Solidification is a comprehensive process of transformation of the melt of an alloy into a solid piece of the
alloy, involving crystallization of the liquid phase, segregation of impurities and alloying elements,
liberation of the gases dissolved in the melt, shrinkage cavities and porosity formation.
Fine and homogeneous grain structure is the most desirable for the common castings and ingots.
These conditions are realized when a melt comes to a contact with a wall of a cold metallic mold. Small
equiaxed grains (chill crystals) form at this stage. Latent crystallization heat, liberating from the
crystallizing metal, decreases the undercooling of the melt and depresses the fast grains growth.
At this stage some of small grains, having favorable growth axis, start to grow in the direction opposite to
the direction of heat flow. As a result columnar crystals (columnar grains) form. Length of the
columnar grains zone is determined by the constitutional undercooling. When the temperature of the
melt, adjacent to the solidification front, increases due to the liberation of the latent heat, constitutional
undercooling will end and the columnar grains growth will stop.
http://www.substech.com/dokuwiki/doku.php?id=solidification 1/3
12/29/2017 Solidification [SubsTech]
to top
Segregation
Composition of solidified alloy is not uniform.
Concentrations of impurities and alloying
elements are different in different parts of the
casting. This difference is a result of different
solubility of impurities in liquid and solid phases
at the equilibrium temperature.
Microsegregation is a segregation of
impurities between the dendrite arms. This kind
of segregation may be considerably diminished
by diffusion of the impurities atom into the
dendrite arms during homogenizing annealing.
Macrosegregation
Advancing the solidification front towards the ingot center causes enrichment of the liquid in the central
zone by impurities and alloying additives, rejected by the solidifying metal and pushed by the solidification
front. Segregated impurities are arranged as V-shape marks on the vertical section of the ingot. This effect
is called normal macrosegregation.
Gravity segregation is a segregation caused by precipitation of primary crystals, which are heavier, than
the melt.
to top
Gas pores
Gas pores, entrapped in the solid structure of a casting, arise from different origins:
Gas (Hydrogen) dissolved in the liquid during melting (from damp materials, atmosphere, oils, etc).
When the melt cools down and solidifies hydrogen solubility decreases and it is forced out from the
melt. The gas bubbles are trapped by the dendrites, forming gas porosity.
Gas pores, called blowholes, may be a result of chemical reaction occurring in the solidifying alloy. If a
liquid steel was not deoxidized by deoxidizers (aluminum, silicon), Oxygen and carbon, which are solved
in the steel, form carbon monoxide by the reaction: C + O = CO. The bubbles of CO, trapped by the
dendrites, form blowholes.
Surface blowholes may form as a result of the decomposition of some constituents of mold dressing.
to top
Shrinkage
http://www.substech.com/dokuwiki/doku.php?id=solidification 2/3
12/29/2017 Solidification [SubsTech]
Shrinkage cavity
When a large isolated region of liquid phase remains within solid, surrounding it, shrinkage cavity will
form in this region. The common mold structure includes a riser – a “head”, in which the melt solidifies
last and “feeds” the main casting with liquid alloy, compensating the casting shrinkage.
Shrinkage porosity
This shrinkage defect is a characteristic for the central regions of castings (ingots) of the alloys with a wide
temperature range of solidification. In these castings “feeding” melt is not able to infiltrate through the
interlacing dendrites. The local micro-spaces between the dendrites arm remain isolated from the melt in
riser forming micro-cavities or shrinkage porosity.
to top
to Metals
to Basic processes in metals
solidification.txt · Last modified: 2012/06/01 by dmitri_kopeliovich
http://www.substech.com/dokuwiki/doku.php?id=solidification 3/3