he
x0
Ho
Pure water
Figure P4-3 Mixing tanks for Problem 4.4.
44. Consider the process shown in Fig P43 where different streams are anixed.
Sucams 5. 2. and 7 are solutions of water and component A: steam 1 is pure
‘water. The steady-state values for cach stream arc given in Table P4-1, Detemmine
the following transfer fimctions, with the numerical values for every tem.
E
Xd X45)
Xs)" XG)"
(5)
(8)
mI
4-5. Consider the two stirred tank reactors in series with secyele shown in Fig. Pad.
Table Pad. Process Information and Steady-State Values for Problem 44
Information
Tank volumes: V, = V>= Vs= 7000 sal
Concentration transmitter range 03 to 0.7 mass fiaction. This transmitter’s dynamics
can be described by a dead time of 2 min
Valve. The flow is proportional to the fraction valve position in the range of 0 to 3800
gem. The valve dynamics can be considered negligible
‘The density of all streams can be considered similar and constant.
Steady-State Values
Sueam Flow, gpm Mass Fraction
1 1900 0.000
2 1000 0990
3 2400 0.167
4 3400 0409
5 500 0.800
6 3900 0472
500 0900