Sunteți pe pagina 1din 3

The X Series

MMA - Electrode

Built for extreme use, extra powerful for large electro-


des, excellent for CEL thanks to MICOR® technology.
The conditions under which electrode welders work are The unit is tested for operation under extreme conditions.
usually quite demanding, but sometimes, the field of After all, when you use the X, we do not know whether
application is just as extreme. Rain, wind, mud, dust and you are using it in the Arctic or in the Sahara or anywhere
dirt. Conditions under which some machines are simply not in-between! In addition to all of its “off-road” qualities – of
able to cope. And what then? New machine purchasing and course, the X is capable of welding too and you can be as-
many repairs are necessary. This is what welding on-site sured that it performs this task absolutely perfectly. Inside,
used to be like. The X Series has been created exactly for the innovative and patented Lorch MICOR technology oper-
this field of application. ates and ensures a fantastically stable arc. These quality
Because when it comes to the crunch, time is money. features are also shown when powered by a generator or
For this reason, the X is equipped with everything you in the case of high voltage fluctuation and even when used
might need for operation outside of the warm workshop: with cables up to 200 m long! Whilst other units will have
compact dimensions, crash-proof up to 60 cm, all around already given up their service, the X ignites perfectly and
protection against water splashes, excellent shielding with complete stability.
against dust and foreign particle infiltration. In addition Protection category IP 34

a special base construction, enabling a sufficient ground


clearance as well as a stable platform. The robust base plate Optional polarity change
function PST
is made from stainless steel and ensures a long life cycle, (Polarity Switch Technology)

and also indicates the maximum allowable penetration


depth into water clearly. You have read correctly, it is really
no problem to place the X series in water up to the height of
All-round protection Replaceable dust filter
the stainless steel base without damaging the electronics. against
water ingress

Robust base plate


Protected penetration depth
for placing in accumulated water

The X Series at a glance


3 Maximum performance and perfect welding 3 “3 steps to weld” operating concept
characteristics due to MICOR® technology
3 Fall protection from up to 60 cm height
3 For perfect electrode welding up to 8 mm Ø 3 Provided with InsideCoating: InsideCoating:
3 Stable arc also in case of voltage fluctuation and optimum dust protection
when using up too 200 m long cables
3 Extremely robust housing, protected all-round
3 Especially suitable for basic, rutile and special against water splash (IP 34)
electrodes
3 Outstanding low weight (from 18.5 kg)
3 Absolutely unbelievable vertical down-welding 3 Connection for hand or foot remote control
of cellulose electrodes (CEL) up to 3.2 mm Ø
3 Including MICOR-Up function for perfect manual 3 Optional: stable hand remote control with or
without magnetic holder
metal arc vertical seam welding (in the ControlPro)
3 Electrode welding with Hotstart, pulse function 3 Optional: polarity change function
(ControlPro), Anti-Stick and Arc-Force regulation 3 Generator-compatible
technology
3 Can also be used with semi-automatic MIG-MAG
3 Gouging wire feeders

3 DC-TIG with ContacTIG 3 Manufactured and tested according to


18 DIN EN 60974-1, with CE mark, S-symbol and IP 34
X Series
MicorUp simple and fast manual
metal arc vertical seam welding.
Lorch’s revolutionary MICOR® technology
not only makes the X series insensitive to
voltage fluctuations but also adds a world’s
first with MicorUP, a technology used in
the X 350 ControlPro that provides: perfect
manual metal arc vertical seam welding. The triangle method
is no longer necessary. The welder simply guides the electrode
directly upwards. Even with basic electrodes, excellent results
can be achieved. The reason for this progress: MICOR® tech-
nology. Although with normal inverters in the low amperage
range the arc can quickly collapse, thanks to patented control
engineering the MICOR technology always provides sufficient
power to keep the arc ignited and stable. And although until
now manual metal arc vertical welding has normally been done
in two passes, the root with a small electrode and the capping
layer with a large electrode, with the MicorUp process a single
run with the large electrode is usually sufficient.
MicorUp
Manual metal arc
vertical seam

3 steps to achieve weld perfection


1. Select electrode type
2. Select operating mode
3. Adjust welding current

Extremely robust.
The statistics state: Every machine is dropped
at least 4 times during its life time and this is
under normal operating conditions. Yes, honestly!
Especially in extreme use, the danger increases
and also the probability of a drop. The norm
requires that a unit can survive a free fall of
just 25 cm. Yes honestly! Only that! But it is
definitely much higher than that if a machine
falls out of the back of the van or from your
hand while carrying it, and then the machine is
usually broken. This however is not the case
with us, we have designed a
special crash protection for
the X. The result is impres-
sive: with a fall protection
from up to 60 cm
height.

Quality
Standard X 350 Made in Germany 19
Easy handling guaranteed – the operating concepts of the X series
BasicPlus ControlPro

3 “3 steps to weld” operating concept 3 “3 steps to weld” operating concept


3 7-segment display, exact to the amp 3 7-segment display, exact to the amp
3 Advance selection of electrode for optimum results 3 Advance selection of electrode for optimum results
3 Hotstart can be set in submenu 3 Hotstart on / off (can be set in submenu)
3 Can switch to TIG function 3 Can switch to TIG function
3 Can be used with semi-automatic MIG-MAG wire feed cases 3 Can be used with semi-automatic MIG-MAG wire feed cases
by means of CV curve (CC and CV curve)
3 With MicorUp function for optimum electrode vertical
seam welding
3 As PST variant, also with polarity reversal function
3 Pulsing function can be activated

The power variants


X 350 X 350 PST
350 A 350 A

Manual remote controller Wireless contact remote controller


HR 33 PST KR 10 of the X series.

Welding range X 350 X 350 PST


MMA- Electrode 10 – 350 A 10 – 350 A
Weldable electrodes
Electrode Ø in mm 1.6 – 8.0 1.6 – 8.0
CEL Ø in mm up to 6.0 up to 6.0
Standard duty cycle for MMA – electrode measured according to German quality standard DIN EN 60974-1
Duty cycle 100 % (40 °C) 230 A 230 A
Duty cycle 60 % (40 °C) 280 A 280 A
Duty cycle I max. (40 °C) 35 % 35 %
Machine
Mains voltage 3~400 V 3~400 V
Permitted mains tolerance +25 % / – 40 % +25 % / – 40 %
Mains fuse, delayed action 25 A 25 A
Dimensions in mm (L x W x H) 515 x 185 x 385 515 x 185 x 385
Weight 18.5 kg 19.8 kg
Polarity change function (PST) –– •
Operating concepts
BasicPlus • ––
ControlPro • •
www.lorch.eu 21

S-ar putea să vă placă și