Documente Academic
Documente Profesional
Documente Cultură
403C-11G
Diesel Engine – ElectropaK
9.3 kWm 1500 rev/min
11.4 kWm 1800 rev/min
17.9 kWm 3000 rev/min
*22.3 kWm 3600 rev/min
*gross standby power
All information in this document is substantially correct at time of printing and may be altered subsequently Publication No. 1662/10/05 Produced in England ©2005 Perkins Engines Company Limited
400 Series
403C-11G
Standard ElectropaK Specification 760 mm 479 mm
Air inlet
Mounted air filter
Lubrication system
Wet steel sump with filler and dipstick
667 mm
Spin-on full-flow lub oil filter
Cooling system
Thermostatically-controlled system with belt driven circulating pump General Data
and pusher fan
Number of cylinders 3
Mounted radiator piping and guards
Cylinder arrangement Vertical in-line
Electrical equipment Cycle 4 stroke
Induction system Natural aspiration
12 volt starter motor and 12 volt 55 amp alternator with DC output
Combustion system Indirect injection
Oil pressure and coolant temperature switches
Cooling system Water-cooled
12 volt shut off solenoid energised to run
Bore and stroke 77 x 81 mm
Glow plug cold start aid and heater/starter switch
Displacement 1131cc
Flywheel and housing Compression ratio 23:1
1500/1800 rev/min Direction of rotation Anti-clockwise
High inertia flywheel to SAE J620 Size 61⁄2 Heavy viewed on flywheel
Flywheel housing SAE 5 Long Total lubrication system
3000/3600 rev/min capacity 4.9 litres
High inertia flywheel to SAE J620 Size 61⁄2 Light Total coolant capacity 5.21 litres
Flywheel housing SAE 5 Short Length 760 mm
Width 479 mm
Mountings Height 733 mm
Front and rear engine mounting bracket Dry weight (engine) 134 kg
(1500/1800 rev/min)
Literature 116 kg
User’s Handbook (3000/3600 rev/min)
Final weight and dimensions will depend on completed specification.
All information in this document is substantially correct at time of printing and may be altered subsequently
Publication No. 1662/10/05 Produced in England ©2005 Perkins Engines Company Limited