Documente Academic
Documente Profesional
Documente Cultură
The dimensions of walls are comply with design drawings Yes / N/A
Remarks:
Contractor :
Consultant Engineer
Chipping of slab and/or mortar layer is applied as bed and satisfied Yes / N/A
FORMWORK
Length of the formwork Yes / N/A
Width of the formwork Yes / N/A
Position of the formwork Yes / N/A
Check cleanliness / free of dirt, debris & wash water Yes / N/A
Forms release agent applied Yes / N/A
Level marked Yes / N/A
Sealed against grout leaking Yes / N/A
REINFORCEMENT
Approve Material Used Yes / N/A
R/F Free from loose rust and mill scale, dirt, oil, grease and paint Yes / N/A
Placed in positioning according to the Drawings Yes / N/A
Correct bar sizes / spacing Yes / N/A
Correct lap length Yes / N/A
Properly fixed Yes / N/A
Layer of Bar separated by Spacer Bars (If Necessary) Yes / N/A
COVERING
Cover required Yes / N/A
Cover correct Yes / N/A
Properly fixed Yes / N/A
Contractor :
Consultant Engineer
Contractor :
Consultant Engineer
CONCRETE POURING
Starting time
Horizontal concrete layer thickness not exceed required limits Yes / N/A
Concrete dropped high not exceed the required limits Yes / N/A
Finish time
Contractor :
Consultant Engineer
FORMWORK STRIKING
Properly green cut the required surfaces (if applicable) Yes / N/A
Contractor :
Consultant Engineer