Documente Academic
Documente Profesional
Documente Cultură
A device not only sustaining the static load, but also absorbing the
thermal movements.
Snubber(Group HS)
A device not only sustaining the dynamic load, but also absorbing the
thermal movements.
Light in weight.
Easy to handle and install.
Availability for special use.
Threaded Connecting Element(Group TC)
A device connecting one product with the other item.
Miscellaneous Items(MI)
A device sustaining pipe load in the lateral direction.
Insulated Pipe Support
A device sustaining the static load for cryogenic piping.
Shot Blasting Auto Shot M/C, Manual Shot Booth Apron / 2.5H x 5W x 11L 3
Performance Test M/C C/S, V/S Hanger Test M/C, etc 10~40ton, 20~50ton 5
Measuring & Test Load Cell-Spring Test M/C 2,5,10(2),100,400.490KN 7
For design, manufacturing, and inspection of the supports, the relevant international standards, technical
Regulations and codes are taken into account as above.
The understanding of spring hanger selection is very important. Please follow the steps below:
1. Calculate the spring rate and select the spring with spring rate lesser than the calculated one.
2. Choose the column in the catalogue where the hot load lies within the mid range.
3. Now check whether cold load lies within the travel range of spring.
4. If cold load lies beyond the travel range, switch to the next higher size spring or next travel
range.
www.lisega.de