Sunteți pe pagina 1din 24

COLOR TELEVISION

M 70-281/8 IDTV/LOG
If the authorised dealer has already set up and ad- ❒ Special Functions 11
justed the unit, begin on Page 5 of this Selecting the dialogue language . . . . . . . . . . . . 11
operating manual.
Environmental mains switch . . . . . . . . . . . . . . . 11

❒ Safety, Setting up and Connection 3 Switching on with… . . . . . . . . . . . . . . . . . . . . . 11


Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Picture/audio scale . . . . . . . . . . . . . . . . . . . . . . 11
Connection example . . . . . . . . . . . . . . . . . . . . . . 3
The GRUNDIG MEGALOGIC System . . . . . . . . . . 3 ❒ Convenience Functions 11-13
The child proof lock . . . . . . . . . . . . . . . . . . . . . 11


Contents

Preparing and Assigning Channel Entering secret number . . . . . . . . . . . . . . . . . . 11


Positions 4 Blocking programmes unfit for children . . . . . . 12
Inserting the battery in the remote control . . . . . 4 Blocking all channels . . . . . . . . . . . . . . . . . . . . 12
Switching set on/off . . . . . . . . . . . . . . . . . . . . . . 4 Freeze frame . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
An energy saving tip . . . . . . . . . . . . . . . . . . . . . . 4 Television programmes » Current TV
Selecting channel positions with ATS euro plus . . 4 programme « . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Selecting dialogue language . . . . . . . . . . . . . . . . 4 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Setting unit location (country) . . . . . . . . . . . . . . 4


❒ Teletext Mode 14-17
❒ Brief Instructions 5 Operating teletext with remote control, short
instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

❒ Assigning Channel Positions 6-7 Normal teletext mode . . . . . . . . . . . . . . . . . . . . 15


The DIALOGUE CENTRE . . . . . . . . . . . . . . . . . . . 6 TOP-FLOF text mode . . . . . . . . . . . . . . . . . . . . . 15
The TV-STATION TABLE . . . . . . . . . . . . . . . . . . . 6 Enlarging the teletext page . . . . . . . . . . . . . . . . 16
Changing or reentering station names . . . . . . . . 6 Page stop with multiple pages . . . . . . . . . . . . . . 16

Entering a “new” channel number – fine tuning . 7 Calling up subpages directly . . . . . . . . . . . . . . . 16


Answer release . . . . . . . . . . . . . . . . . . . . . . . . . 16
Activating decoder (descrambler) . . . . . . . . . . . . 7
“Page Catching” – selecting and calling
Scanning for “new” television channels . . . . . . . 7
up certain teletext pages . . . . . . . . . . . . . . . . . . 16
Setting the Norm . . . . . . . . . . . . . . . . . . . . . . . . .7 Selecting a language group . . . . . . . . . . . . . . . 17
Updating a teletext page . . . . . . . . . . . . . . . . . . 17
❒ Using the Remote Control
While Watching TV 8
Remote control buttons . . . . . . . . . . . . . . . . . . . 8
❒ Connection Options and Operation 18-20
The AUDIO/VIDEO connections . . . . . . . . . . . . . 18
Remote control for video recorder . . . . . . . . . . . 8
Connecting a camcorder . . . . . . . . . . . . . . . . . . . 18
Connecting one or two video recorders . . . . . . 19
❒ Adjusting the sound 9
The GRUNDIG MEGALOGIC System . . . . . . . . . 19
Entering personal selection data . . . . . . . . . . . . . 9
Connecting a satellite receiver or
Stereo range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
a SET-TOP box . . . . . . . . . . . . . . . . . . . . . . . . . 19
Audio (stereo/two-channel, mono) . . . . . . . . . . . 9
Connecting a decoder (descrambler) . . . . . . . . . 20
Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Copying video recordings using the TV set . . . 20
Treble, bass, balance . . . . . . . . . . . . . . . . . . . . . 9
Adapting the volume to a channel position . . . . . 9 ❒ Technical Specifications 21
Technical specifications . . . . . . . . . . . . . . . . . . 21
❒ Changing the Picture 10 Service notes for authorised dealers . . . . . . . . . 21
Setting personal selection data . . . . . . . . . . . . . 10
Adjusting the contrast, picture definition,
white balance, perfect clear and noise reduction 10
❒ Correcting problems yourself 22

Adjusting brightness and colour contrast . . . . . 10

k Picture format switching 16:9 . . . . . . . . . . . . . 10


2 Correcting colour registration . . . . . . . . . . . . . . 10
❒ ❒

Safety, Setting up and Connection


Dear Customer! Connection example
(TV set and Video recorder)
6 In order for this high-quality convenient TV set to
bring you viewing pleasure for many years, it is
necessary that you observe the following points
when setting it up.

5x
AV1

w! Ideal viewing distance is 5x the length of the TV


screen diagonal
Light from external sources falling on the TV the
screen will impair the picture quality. L
AUDIO
L
EURO - AV 2

O I EURO - AV 1
x
U
T N

R R

10 10
cm cm
20 20 cm
Krieg am Golf
cm

6 This highly digitalised TV set offers you optimum


picture and sound quality.

w! There must be sufficient clearance from the cabinet w! The essential prerequisites for this are:
An aerial system and aerial connection cable in per-
walls at the appropriate location.
w! Do not cover the ventilation openings.
fect working order with a high degree of shielding

w!
(85dB) as a connection between the TV set and
Heat build-ups may occur in the set. aerial socket or between the TV set and video
recorder.
w!
– Heat build-ups are a source of danger and may
shorten the life span of the set. Avoid wear to the cable near the set.
For safety reasons, have an expert remove
deposits from the set occasionally.
w! Do not damage the mains cable.
❒ The GRUNDIG MEGALOGIC System

w!
The TV set is equipped MEGALOGIC System.
Do not place any magnetic field sources in the vicini-
If you connect a GRUNDIG video recorder to the
ty of the set (speaker boxes for example).
w!
MEGALOGIC System using the supplied Megalogic-
Do not place flower vases or flower pots on top of EURO/AV (Scart) cable, terrestrial TV channels (and
the set. all channel position related information) are auto-
w! Ensure that liquids or other objects are not allowed
to enter the set (danger of short circuits).
matically transferred to the video recorder (VCR)
with each “Reprogramming of the TV channel”.

w!
“Setting the TV channel on the video recorder” is no
Clean the TV screen with a moist, soft towel using longer necessary.
pure water only. Exactly how this works can be found on Page 19,
w! Avoid damage from lightning strikes by disconnect-
ing the mains and aerial cables.
“the GRUNDIG MEGALOGIC System”.

– Even if the set is switched off, damage may result


from a power surge due to lightning in the mains
or in the aerial cable.
w! The set may be opened and maintained by authoris-
ed experts only.
w! This TV set is to be used for the reception and
reproduction of picture and audio signals. Any
other use is excluded.
k
3
Preparating and Assigning Channel Positions ❒ Inserting the battery in the remote Selecting dialogue language
control
6
w
You can select several languages for the dialogue
! Pay attention to the polarity indicated in the battery between you and your TV set. The user instructions
compartment. are displayed in the selected language.
When the battery is dead, the message
”Telepilot Battery” appears on the picture screen. 1 Confirm » Adjust language on screen « with the
G button or select another language with the p
or the P button and confirm with the G button.
❒ Switching set on/off
1 Press the ü button on the set. Adjust language on screen

6
■ D Deutsch
If the display then illuminates, the set is already on DK
E
Dansk
Espaƒol
standby. F
GB
Franƒais
English
I Italiano
The set can be completely switched on, by pressing N Norge
NL Nederlands
the 1 0– buttons or the P button on the remote P
S
Portugu´s
Svenska
control. SF
TR
Suomi
Türkçe

To 2nd page

❒ Switching set to standby Select with P- button and


confirm with OK

1 Press the A button on the remote control. The set OK Confirm TXT TV-picture

is not completely switched off.


The set can be switched on with the remote control. Setting unit location (country)
2 Select » Adjust country « with the p or the P but-
❒ Switching the set off completely ton and confirm with the G button.
1 Press button ü on the set,
Adjust country

or
A Austria
B Belgium
press the A button on the remote control twice. CH Switzerland
D Germany
(The eco mains switch must be activated.) DK Denmark
E Spain
Switch on again with the ü button on the set only. F France
■ GB Great Britain
I Italy
N Norway


NL Netherlands
An energy saving tip P
S
Portugal
Sweden
SF Finland

6 The unit is equipped with an eco mains switch.


* Others

It switches the unit off completely from stand-by OK Confirm TXT TV-picture
mode. This will save energy. The switch off time
has been set to an hour at works. It can be set to 1
– 4 hours. (See page 11, »SPECIAL FUNCTIONS« If you do not find your country in the list, then se-
menu, »Eco mains switch« menu item). lect » Others « and confirm with the G button.

❒ Selecting channel positions with 6 The automatic channel search procedure begins.
The following indication shows this.
ATS euro plus
6 The set is equipped with the automatic programme
scan function ATS euro plus which saves you
having to select a channel position.
After switching on the set, the Page » Adjust langu-
age on screen « appears.
6 If the Page » Adjust language on screen « does not Please wait
––
appear, press the . button and following this
G button. All receivable stations are
automatically searched and
stored in the TV programme
The » DIALOG CENTER « is displayed. chart.

w!
Select the » AUTOMATIC PROGRAMMING « line
with the p or the P button and confirm with the Depending on how many TV channels are being
G button. received this function can take up to one minute or
longer.
Select the » Complete reprogramming (when chan-
ging address) « line with the p or the P button
k and confirm with the G button.
4
w! After the search procedure, the set switches to
channel position 1 and the Page » Brief instruc-
6 po Step-by-steb programme
move cursor up or down
selection:

tions« is displayed. If a Grundig videorecorder with OK Confirmation of the selected function.


Megalogic system is plugged in, the channels are
automatically transferred to the videorecorder befo- FE Setting of values.

Brief instruction
re the brief directions are displayed.
6 Call up Dialog Center.
Brief instructions

po Programme change TXT Return to TV screen.


OK

FE
Programme selection list

Volume
z Switching sound on/off.
6 Call up Dialog Center
• Button k (red) picture adjustment


TXT Teletext on/off
Button g (blue) sound adjustment
z

w!
Sound on/off

• Picture settings
Please commit these buttons to memory as they
• Sound settings
will be repeatedly used in the following function
TXT TV-picture
steps!
1 To exit the function press the 1 button.
TXT

6 The short instructions can be called up by pressing


the D button.
¢ ❒ You can watch TV immediately!
6 With some TV programmes it is necessary to
❒ Brief instruction – the guide for change the basic adjustment of the volume,
dialogue between you and your set brightness and the colour contrast (colour).
6 Some remote control buttons are explained on the 6 Press the » – « (Minus) or » + « (Plus) button until
Page » Brief instructions «. the desired result is achieved.
It shows you with which buttons you can select and
call up certain functions. 1 Change the » Volume « with the F or the E
button.

2 ® button.
Change the » Brightness« with the
P
3 Change the » Colour « with the ™ button.

OK 6 This quality TV set is equipped with many convenien-


ce functions.
P
The » DIALOG CENTER « informs you which other
functions the TV set offers you. Please turn over.

TXT

6 With most of the displays, the dialogue signs and


lines are presented on the lower border of the
screen. They are guides for dialogue between you –
using the remote control – and the set.
You will be guided simply and in understandable
language through the next steps and optional
functions.

OK Confirm TXT TV-picture k


5
❒ The DIALOGUE CENTRE Changing or reentering station name
6 6
Assigning Channel Positions
The » DIALOG CENTER « is the control centre of the You can select, change or reenter a new station
TV set. name (abbreviation) from an existing list.

1 You can call it up by pressing the h and G 1 Select “Change name” with the g button.
buttons.
■ ZDF

ARTE
ANT3
BBC
DIALOG CENTER
BBC1
BBC2
BRT1
■ PARENTALLOCK BRT2
TV-PROGRAMME-CHART CAN+
CAN5
AUTOMATIC PROGRAMMING CART
(ATS/ACI/MEGALOGIC) CH4

AUDIO/VIDEO INPUTS
SPECIAL FUNCTIONS PROG 01 –ZDF
F ■ ■ ■ ■ ■
E
SERVICE

OK Confirm TXT Stop / cancel

OK Call up TXT TV-picture

6 Select the required function from the contents of w! For further settings use the information in the dialo-
gue line.
the » DIALOG CENTER « or continue reading here.
2 Select » Station name « and confirm.
❒ The TV-STATION TABLE 6 If there is no appropriate station name in the list
6 You can obtain an overview of the assignment of you can enter your own station name.
channel positions on the Page » TV-PROGRAMME-
CHART«. 3 Press the E button once and select the required
letters/numbers with the p or P button.
1 Call up the » DIALOG CENTER « with the h and
G buttons. 4 Select the next position with the E button and se-
lect the required letter/number with the p or P
TV-PROGRAMME-CHART
button.
Prog

AV
Name Chan. Decoder
6 Repeat the entry until you have obtained the required
■ 1 ARD C 06 station name.
2 ZDF C 34
3 BR 3 C 59
4 RTL C 36
5 SAT1 C 40 5 Confirm the selection. The Page »TV-PROGRAM-
6 PRO7 C 21
7 RTL2 C 53 ME-CHART « appears on the screen.
8 PREM C 12 On
9 –––– C 00

● Change name
● Move 6 Return
● Change channel
● Delete TXT TV-picture
AUX Decoder

2 Selecting and calling up the » TV-PROGRAMME-


CHART «.
w! For further settings observe the information in the
dialogue line.
Check to see which “Stations” are occupying the
channel positions.
You can make changes in the assignment of chan-
nel positions (the station name, the sequence etc.).
3 Select the channel position “to be changed”. Press
the corresponding coloured button on the remote
control for the required function, for example.
“Change name” = blue button g
“Move” = yellow button j,
“Change channel” = green button h,
“Delete” = red button k.

k
6
Entering a “new” channel number – Fine 2 Once all the changes have been carried out, exit the
tuning 1
function with the TXT button.

Assigning Channel Positions


1 Select function » Change channel « with the h
button. Channel position ten is highlighted in red.
❒ Scanning for “new” TV channels
6 If you want to know if “new” TV-channels can be
received at your current location, select the » Search
for new TV stations« function.
Previously stored TVchannels are retained, the
“new” ones are added.
0–9 Channel entry If you move home, we recommend selecting the
● Search mode
function » Complete reprogramming (when chan-
Fine tuning ging address) «.
All channel position data is completely erased, the
PROG 01 –C 34 00 Norm
F ■ ■ ■ ■ ■
E channel positions are “reassigned”.

Call up the » DIALOG CENTER « with the h and


OK Confirm TXT Stop / cancel
1
G buttons.

w! 2 Select and call up » AUTOMATIC PROGRAMMING «.

w!
For further settings, observe the information in the
dialogue line. For further settings, use the information shown in
the dialogue line.
2 If you want to select a special channel, press
the F button and then the p or P button. 3 Select » Search for new TV stations «,
Indication C (for channel) changes to S (for special
channel). or
Press the E button and enter the channel number » Complete reprogramming (when changing
0 9
using two digits with the … buttons. address) «.

3 If you want to enter a certain progamme but do not AUTOMATIC PROGRAMMING

know its channel number then press the g but-


ton (blue) repeatedly until the required channel ■ Search for new TV stations
appears on the screen. Complete reprogramming
(when changing address)

Data transfer of
Fine tuning TV programme chart TV → VCR

6 The set adjusts automatically to give you the best


picture and sound quality.
Given difficult reception conditions it may be neces-
sary to optimize the picture and sound quality with OK Call up TXT TV-picture

the fine tuning.


1 Changing the » Fine tuning «.
The values can vary between » + 63 « and » – 64 «
Make note of when you achieve the best picture and
w! If a video recorder with MEGALOGIC functions is
connected to the TV set, there is an additional indi-
sound quality. cator » Data transfer of TV programme chart TV →
VCR « in the menu.
Setting the norm w! Wait until all TV programmes have been transfer-
red. This can take a minute or longer.
1 Press the F button repeatedly until the list of
norms appears. Following the search procedure, the set switches to
channel position 1 and the indication » Brief instruc-
2 Select the required norm with the p or P button. tions« appears.

3 Confirm the settings. The Page » TV PROGRAMME- 4 Exit the function with the 1 button.
TXT

CHART« appears on the screen.

Activating the decoder (descrambler)


1 If a decoder (scrambler) is required for a program-
me and is connected, it is also necessary to press
the AUX button » on «- as in the » TV PROGRAM-
¢
ME-CHART « under the » Decoder « indication for
the corresponding channel position. k
7
On this page the buttons on the remote control are
Using the Remote Control While Watching TV briefly explained. For more detailed information
please refer to the corresponding chapter.

1…9 Channel position selection b Press button once: Switches set to


standby.
Press button twice: Switches set
AV 0 Changing AV position off completely (provided that the
1 2 3 eco mains is activated, see
Page 11).

P Sequential programme selection 4 5 6


forwards (1, 2, 3 ...)
p Sequential programme selection
reverse (... 3, 2, 1) 7 8 9
or
Pp Moving cursor up/down 0
xc Volume
or
xc Moving cursor left/right. P
G Changing and activating various
OK
functions. Displaying and deleting
the programme selection bar. P

h » DIALOG CENTER « ¢a Audio on/off (mute).


(with the h and G buttons). TXT ¢ TXT Teletext mode Ç TV mode.
¢ D Call up »Brief instruction«
h Time on/off.
k Picture adjustment g Audio adjustment
Preselect to access the » Picture Preselect to enter » Sound
settings « menu. settings « menu.

j Freeze frame SAT PIP


® Changing brightness.
E Switching picture format
4:3 Ç 16:9.
VIDEO AUX
™ Change colour intensity. AUX Preselection button for various
functions, AUX and j button
SAT GRUNDIG satellite receiver remo-
¢
is channel scan function.
te control (keep SAT button pres-
sed down and select satellite C Info about the current programme
channel). (“Current TV programme”
VIDEO GRUNDIG video recorder remote TP 800
for example)!
control (Keep VIDEO button
PIP without function
pressed down).

Remote control for video recorder


You can use the remote control to operate the ik (Button – )E = Picture search backward
GRUNDIG video recorders with the remote control ju E
(Button +) = Picture search forward
of this TV set. Your authorised dealer will tell you ● (Button h) = Record start
which are suitable. ■ (Button F ) = Stop
Keep pressing the VIDEO button. ii (Button – R) = Rewind
¢ uu (Button R +) = Fast forward
This is how you switch the remote control to video
ll (Button D )
¢ = Pause
recorder operation
Then press the required button. e (Button E) = Playback start
You can determine which buttons activate which P = Channel position +
k recorder functions from the list opposite. p = Channel position –
8
❒ Adjusting the sound ❒ Headphones
You can carry out four different sound settings
Insert the headphone plug (3.5 mm Ø jack) into the
consecutively.

Adjusting the sound


headphone socket at the front of the set.
With the blue g button you can select » Langua-
ge«, » Music «, » Supersound « and » Sound settings You can set the headphone volume individually.
Personal «. » Language «, » Music « and » Superso-
und « are » permanent « sound settings which can-
not be changed. Select the appropriate sound set-
ting adjustment for a given TV programme.
P

❒ Entering personal selection data


1 If you want to make individual sound settings you
must select and call up the » Sound settings Perso-
nal « with the blue g button.
The indication » Sound settings « appears.

Sound settings

■ Stereo exp. F + ..Ÿ F


Sound Mono
Headphones Mono
Treble
Bass
Balance
Volume P1

1 Select » Headphones « and select the appropriate


TXT TV-picture
sound » Mono « or » Stereo « and with two-channel
broadcasts » Mono A « or » Mono B «.
2 Changing the volume: Press the AUX key and then
¢
❒ Stereo range change the volume of the headphones with the F
Widens the acoustic pattern for stereo programmes and E keys.
and improves it for mono programmes. The new volume level is displayed on a scale.
1 Select and change » Stereo exp. «.
❒ Treble, bass, balance
The sound settings can be corrected as you wish.
❒ Audio (stereo /two-channel, mono)
1 Select and adjust » Treble «, » Bass « or » Balance «.
6 If the set receives two-channel programmes – a
film in original on sound channel B (indication:
mono B) and the synchonized version on sound ❒ Adapting the volume to a channel
channel A (indication: mono A) for example – you position
can select your preferred sound channel. If a channel is too loud or too quiet compared with
the others, it can be adjusted.
6 If the set receives stereo programmes it switches
automatically to stereo sound playback (indication: Example:
stereo).
In case of poor stereo-sound reception quality, we 1 Select and change » Volume P1 «.
recommend switching the sound to » Mono «.
6 Only the volume of the current selected channel is
1 Select »Sound« and » Mono « or » Stereo «. changed (in the example » P1 «). This adjustment is
also possible for the » AV « channel positions.

1 button.
2 If the audio of a certain programme is to be
constantly in » mono «, enter » ,MO « after the third 2 Exit the function with the TXT

character as the station name. See page 6, » Chan-


ging and Re-entering Station Names «.

k
9
❒ The picture settings
Changing the Picture You can carry out four different picture settings 6 Only the picture quality of the presently selected
consecutively. programme is changed. See the chapter, » Comfort
Functions – Service «, for how to change the noise
You can select the four picture settings k » reduction for all programmes.
During the day «, » In the evening «, » Soft « and »
Picture settings Personal « with the red button. You can choose between three entries:
Off/Weak = with good picture quality
» During the day «, » In the evening « and » Soft « Autom. = with slightly snowy picture
are “permanent” picture settings which cannot be High! = should be used only with heavily disturb-
changed. Select the appropriate picture setting ed picture since tracers may occur with
according to the time of day or picture appearance. rapid movements.

❒ Setting personal selection data 1 Exit the function with the 1 button.
TXT

1 If you want to make an individual picture setting


you must select and call up the » Picture settings
❒ Adjusting brightness and colour contrast
Personal « with the red k button. 6 Press the appropriate » – « (Minus) or » + « (Plus)
The indication » Picture settings « appears. button until the required value has been set.

1 ® button.
Change the »Brightness« with the

2 Change the »Colour« with the ™ button.

Picture settings
3 With video recorder playback in NTSC recording
mode, in addition to the colour contrast the colour
Contrast F ■■■■■■■■–– E

Sharpness ■■■■■■■■■■
tone (tint) can be corrected Select » Tintkorrektur «
White bal.
Perfect Clear Off
with the ¢ AUX button and then reset with the
Noise reduct. P 1 Auto
™ button.

TXT TV-picture
❒ Picture format switching 16:9
If a recorded PALplus programme is relayed to the
The picture settings can be corrected as required.
TV set with a video recorder, camcorder or a PAL-
plus decoder, the picture format must be switched
2 Select and change » Contrast «, » Sharpness «,
to 16:9.
»White bal.«, »Perfect Clear« or »Noise reduct.«.
1 Press the ¢E button until the indication » 16:9 «
Contrast appears.
The set has been tested with a maximum contrast
in order to check the reliability of all components. Panorama Zoom
Regardless of the location of the set or the bright-
ness of the room (ambient light), it is a good idea to 1 Press the E button until the indication » Pan-
¢
reduce the contrast somewhat, in order to obtain orama Zoom « appears.
the subjectively best picture. As long as the » Panorama Zoom « operating mode
is displayed as a guide to the user on the lower
Sharpness edge of the screen, the picture height can be adju-
You can set the picture definition as you wish. sted by pressing the | or ] key, so that any
black stripes remaining on the uppper or lower
White bal. edge of the screen disappear.
You can give the colour a slight red or blue tone.

Perfect Clear ❒ Correcting colour registration


Enlargens the contrast range. The contrast is 6 You can correct the colour if it does not match the
increased in the darker areas of the picture, depth picture
and definition of the picture are improved.
1 Call up the » DIALOG CENTER « with the h and the
Noise reduct. G buttons.
The snow reduction improves the picture quality in 2 Select and call up » SERVICE «.
case of poor TV/video signal sources .
Furthermore, colour disturbances caused by exter- 3 Call up and change » Colour match «.
nal systems (cross-colour) are reduced which Only the colour registration of the currently
occur on fine black & white vertical lines. selected channel will be changed.

k 4 Exit the function with the 1 button.


TXT

10
❒ Using the special functions! ❒ Using the convenience functions!

Special and Convenience Functions


Call up the » DIALOG CENTER « with the h and
1
G buttons. ❒ The child proof lock

2 Select and call up the » SPECIAL FUNCTIONS «. 6 With this function you can enter a secret number
with which you can either
SPECIAL FUNCTIONS – block programmes unfit for children, or
– block all channels,
■ Adjust language on screen – block all channels after a certain time of day.
Mains economy sw. 1h
Proceed as follows:
Switch on with Prog

Pic./sound options on 1 Call up » DIALOG CENTER « with the h and G


Mecalogic Info off button.

6 Return
OK Call up DIALOG CENTER
TXT TV-picture

■ PARENTAL LOCK
TV-PROGRAMME-CHART

Adjust language on screen AUTOMATIC PROGRAMMING


(ATS/ACI or MEGALOGIC)

See Page 4, » Adjust language on screen «. AUDIO/VIDEO INPUTS


SPECIAL FUNCTIONS
SERVICE

❒ Environmental mains switch


OK Call up TXT TV-picture

6 With this the set can be preset so that, after a cer-


tain time (selection from 1 to 4 hours), it switches
off completely from standby, saving energy. 2 Select and call up » PARENTAL LOCK «.

1 Select » Mains economy sw. « and enter required


switch off time.
❒ Entering secret number
1 Always enter four digit numbers with the 0…9
Switch on with… digit buttons (1111 for example).

6 If you frequently use the set as an AV monitor - with 2 Store the secret number with the G button.
a camera as monitoring system or when operating
a satellite receiver for example - this function gives
6 Please remember the stored secret number.
In case you forget it a button combination on the
priority to the channel position » AV «.
last page of this instruction manual will help you. If
This means that after the power button is pushed,
you press these buttons on the remote control
the programme position » AV « appears instead of
consecutively, the “lock” will be released.
programme position » P1 «.
6 Please turn over!
1 Select and enter » Switch on with« and select the
required channel position » Prog « or » AV «.

❒ Picture/audio scale

6 You can decide to display or remove the scale for


volume, brightness, colour contrast.

1 Select » Pic./sound options « and enter » On « or


» Off «.

❒ Megalogic Info
6 The » Megalogic Info « line only appears when a
Grungid videorecorder with Megalogic is plugged
in. With Megalogic Info, information from each
videorecorder mode can be displayed (e.g. play,
record, fast forward, etc.).

k
11
Convenience Functions ❒ Blocking programmes unfit for children
6 The signal to block programmes is not broadcast 6 The set can only be switched back on after entering
by every station. the previously saved secret number.
1 Enter secret number and save it. 6 Enter secret number, the numbers are presented
but out of view.
2 Select » Lock program unfit for children « and enter
The set switches to the TV screen.
» yes « (or » no «).
6 If the function » Lock program unfit for children « Blocking all channels at a certain time
» yes « has been selected and the programmes are
being received, a page will appear with a message; 1 Select and store secret number.
for example:
2 Select » All programmes blocked « and enter » yes «
PARENTAL LOCK
(or » no «).

Code number ■– – – – 3 Always enter the » Switch-off time « with four digits
Lock program unfit for children
using the 0 9
… digit buttons (0845 for
Programme RTL blocked 8:45 hrs for example).
6 The set switches off autormatically after reaching
the entered switch off time and unpermitted access
is not possible.
0–9 Insert code number
4 After switching back on, the Page » PARENTAL
Ç

Progr. select.
LOCK « appears.
6 The set can only be switched on after first entering
❒ Blocking all channels the stored secret number.

1 Enter and save secret number. 5 Enter the secret number, the set switches to the TV
2 Select » All programmes blocked « and enter » yes « picture.
(or » no «).
Completely removing the child proof lock
PARENTAL LOCK

1 Enter the secret number, the numbers are present-


Code number ■– – – – ed but out of view.
Lock program
unfit for children

■ All programmes blocked no 2 Select » All programmes blocked « and enter » no«.
from: ––:––

3 Select » Lock program unfit for children « and enter


» no «.

4 1
Exit the function with the TXT button.
6 Return The set switches to the TV picture.

3 To exit the function press the h button. ❒ Freeze frame


If you want to look at a certain picture for a longer
4 Switch off set. period of time, the picture from the » currently
5 When the set is switched on again the page running programme « can be frozen.
appears: Press the yellow j button.
PARENTAL LOCK
Press the button again to exit this function.

Code number ■– – – –

Stations blocked

0–9 Insert code number

k
12
❒ Current TV programme Service

Convenience Functions
6 You have just switched on the TV set and want to Call up DIALOG CENTER:
know » what’s on «. Press h and G buttons.
1
1 Select the required channel, and then press the Select „Service“ with p and retrieve with
2 O
¢ C button. button.
6 The indication » Programme search « appears on
3 Select „Noise reduct.,“ „Decoder,“ „Decoder-tone
the screen. Then the channel information appears analog“ or „Decoder-tone digital“ with p.
on the screen.

2 If instead the indication » Programme not availa- Noise Reduction


ble« appears then you must call up the teletext, for You can choose noise reduction „off“, „weak“ or
the 3rd channel for example, with the 31 TXT number „automatic“ for all channel positions.
button.
Teletext Page 100 appears on the TV screen. 1 Select desired setting and confirm with G but-
ton.
3 Press the ¢ AUX button. The dialogue symbol line If noise reduction has set for individual channel
appears.
positions (see Chapter „Change Picture), the
4 Move the cursor (coloured square) onto the J „Manual“ setting will be automatically selected.
symbol using the E button Cursor and press the
G button. Decoder
5 In the » Programme preview « function, use the The decoder can be set at „off“ or „on“ for all chan-
1 0… buttons to enter the page number where nel positions.
the programme preview is situated in the teletext of
the currently selected station. 1 Select desired setting and confirm with G but-
ton.
6 1
Terminate the function with the TXT button. If the decoder has been set for individual channel
The set switches to the TV screen. positions (see Chapter „Assigning Channel Positi-
6 Teletext Page 100 shows you on which page to find ons), the „Manual“ setting will be automatically sel-
the “Program preview”. ected.

Sharpness
You can choose Sharpness for all channel positi-
ons.

1 Change the »Sharpness« with the F or E button.


If Sharpness has set for individual channel positi-
ons (see Chapter „Change Picture), the „Manual“
setting will be automatically selected.

Decoder-Sound
If you connect a decoder, the correct setting for the
decoder sound must be selected.

e.g. Premiere analog: external


digital: internal
Canal plus analog : external
digital: internal
.......Be sure to read your decoder operating manual
carefully. Your authorized dealer will be pleased to
give you further assistance..

IR-Dataprogrammer / For authorised


dealer
6 The functions of this line are reserved for authori-

k
sed dealers.

13
Operating Teletext with Remote Control, Brief instruction

1…0 Select teletext pages.


1 2 3

4 5 6

7 8 9

P
Page Catching.
OK
]|
Select teletext pages
P directly and call up with
h Call up teletext index the G button.
1
page.
TXT Teletext mode Ç TV
mode.
TXT
k (red) Turn back page. j (yellow) Scroll to the next chapter
h (green) Continue turning to next with overrun to the next
page with overrun to the theme.
next chapter. g (blue) Scroll to the next
SAT PIP
theme.
™ » – « Call up subpages
directly
® » – « Page stop
» + « Answer release
» + « Enlarge page VIDEO AUX

C Channel preview for the


¢ AUX Call up symbol line current programme
(see below). (text preselection) in
TV mode.
TP 800

What do the symbols on this line mean?


Display with AUX button (duration of indication approx. 5 secs).
¢
Select function with the F or E button.
Call up function with the G button.
G K H L I J

Enlarge cha-
racter size
Bypass waiting
time in TV mode
Call up sub-
pages directly
Answer release
Page stop
Language group-
k selection
14
Teletext … ❒ TOP text (Table Of Pages) or
… is a service free of charge provided by the TV FLOF text modes
stations which is delivered with the TV signal; it is
processed by the TV set and appears on the TV
6 Various topics, chapters and individual pages can
be called up from the index page with the press of a
screen. button.
Teletext consists of a large number of text pages,
1 1
Switch on the teletext with the TXT button. The index

Teletext Mode
news, sports, politics, the stock exchange, weather
reports and much more. on Page 100 or the last teletext called up appears.
The teletext as well as the organisation and set-up 6 On the lower border of the TV screen you will see
of the individual pages differs from station to an info line consisting of red, green, yellow and
station. blue panels.
6 For this function use the buttons on the remote You will also find corresponding coloured buttons
control. on the remote control.

1 Switch the TV set on. 2 Select the required topic with the blue g button.
– The blue information line shows the next topic.

❒ Normal teletext mode 3 Select required chapter with the yellow j button
(with overrun to the next topic).
1 1
Switch on the teletext with the TXT button. The index – The yellow information line shows the next chap-
page, Page 100 or the last video page called up ter of the selected topic.
appears.
4 If the selected chapter has multiple lines these can
2 Select the video page always entering page num- be called up:
0 9
bers in three digits with the … digit buttons. You can turn to the next page with green button
– The page appears promptly. h (with overrun to the next chapter).
You can turn back one page with the red k but-
3 The teletext pages can be turned over one by one ton.
backwards or forwards with the k or h but-
ton. 5 The teletext buttons can also be selected directly
0 9
with the … digit buttons.
4 You can return to the index on Page 100 with the
h button. 6 You can return to the index on Page 100 with the
h button.

OK
P

Topic
TXT (blue button) News
Chapter
SAT PIP (yellow button) Politics Economics Culture
VIDEO AUX

Page 3 Page 3 Page 3


Page 2 Page 2 Page 2

TP 800
Page 1 Page 1 Page 1

Politic news Economics news Culture news


Teletext pages
(buttons red and green) k
15
Enlarging the teletext page Answer release
1 Press the» + « (Plus) ™ button several times, 6 You can call up (reveal) “hidden” answers or
information on certain teletext pages to solve, for
or
example, a puzzle
Press the AUX button and the symbol line will
¢ or
appear on the lower screen border.
to control the VPS times to program a video record-
Teletext Mode

2 Press the F or E buttons to select the G symbol er.


and confirm with the G button.
1 Press the » + « (Plus) button of the ® button,
3 By repeatedly pressing the G button you can
or
have:
– the upper part of the picture in double letter size; press the AUX button and the symbol line appears
¢
– the lower part of the picture in double letter size; on the lower border of the screen.
– normal picture.
2 Press the F or E button to select the L symbol
Page stop with multiple pages and confirm with the G button and the “hidden”
information appears on the teletext page.
6 By multiple pages we mean several subpages which
are automatically “turned over” by the TV station in 3 Switch off » Answer release « with the G button.
a certain cycle.
The multiple pages are marked by an indication, 3/6 “Page Catching” (selecting and calling up
for example, means that you are viewing the third
page of a total of six subpages.
certain teletext pages directly)
If you want to view the subpage for a longer period 6 You will find three-digit page numbers on many
of time, the page can be “frozen”. subpages which you can directly select.
This saves you from having to enter the page num-
1 Press the » – « (Minus) of the ® button, ber.
or 1 Switch on » Page Catching « with the p or P but-
press the AUX button and on the lower border of
¢ ton.
the screen the symbol line appears. 6 » Page Catching ➝ OK « appears on the upper
border of the screen.
2 Select with the F or E button the symbol I and A bright square will flash behind the first or last
confirm with the G button. page number of the index page.
3 The displayed page is now “frozen”, it is no longer 2 Using the p or P button select the required three-
updated and is no longer turned to other subpages. digit number and confirm with the G button and
the page will appear promptly on the screen.
4 Exit the function with the G button and the
current subpage appears. 3 Using the h button you can turn back to the index
page.
Calling up the subpages directly
1 Press the » – « (Minus) of the ™ button,
or
Press the AUX button and the symbol line appears
¢
on the lower screen border.

2 Press the F or E button to select the symbol H


and confirm with the G button.
6 The selected teletext page number appears in the
symbol line; 155/0001 for example.

3 Select the » Subpage « by always entering four digit


0 9
numbers with the … digit buttons.
– The page appears promptly.

4 Switch off the » Subpage « with the G button and


the current subpage appears.
k
16
Selecting a language group Updating a teletext page –
bypassing the waiting time
You can choose from between three language
groups for the dialogue with the video/teletext. 6 The teletext editorial staff updates certain teletext
The individual countries are divided among three pages. You will thus receive the latest information on
European language groups: currency rates or the most recent sports reports and
Western Europe, Eastern Europe and Europe + Tur- news.
key.

Teletext Mode
If you want to watch TV and keep up on the news at
Most European countries are found in the language the same time, select the appropriate page first –
group Western Europe. Page 143 for example – and then press:
If you want to call up the teletext from TV stations Press the AUX button and the symbol line appears
from Poland, the Czech Republic, Rumania or from
1 ¢
on the lower screen border.
former Yugoslavia then select the language group
Eastern Europe. 2 Press the F or E button to select the symbol K
If you want to call up the teletext for TV stations and confirm with the G button.
from Turkey, then select the language group Europe
+ Turkey.
6 You can see the TV screen and the teletext k
sym-
bol appears.
If the indication S143 appears later in the symbol
k
1 Select the required TV channel and call up the
1
teletext with the TXT button. line instead of the teletext
the page is being updated.
symbol, this means

2 Press the AUX button. The symbol line appears on


¢
the lower border of the screen. 3 Press the G button.
The teletext page appears with current contents.
Using the F or E button select the symbol J
3
and confirm with the G button.
6 You can also use this function to bypass the waiting
time while your teletext-decoder scans for a page.
6 The page appears on the screen: Once the page is found, Page 143 for example,
appears in the info line.
Text Setup for: P 1

4 Exit the function with the h or 1 button.


TXT

■ Programme preview P. ■
3 00

Lang. group F Europe + Turkey E

0-9 Enter page number


• Delete
6 Return

4 Select » Lang. group « and “Country”.

5 Exit the function with the 1 button.


TXT

k
17
❒ The AUDIO/VIDEO INPUTS 6 The second page » AUDIO/VIDEO INPUTS « shows
Connection Options and Operation you to which AV socket you should connect any
6 The TV set is equipped with various sockets. Various given unit.
external units can be connected to it, e.g. a camcord-
er, video recorder, SAT receiver, SET-TOP box, Pay- AUDIO/VIDEO INPUTS

TV decoder etc. Sockets Devices

If you inform your TV exactly what kind of external AV3 ● ● ● r–e CAM

unit you wish to connect, the menu » AUDIO/


VIDEO INPUTS « lets you know to which sockets AV2 :::: r–e EXTREC r–e DECOD.
you must connect them.
You will be guided in simple and understandable
terms through the next steps and optional func- AV1 :::: r–e MEGLOG
tions.
6 Return TXT TV-picture

1 Call up the » DIALOG CENTER « with the h and


G buttons.

2 Select and call up » AUDIO/ VIDEO INPUTS «. ❒ Connecting the camcorder to socket
» AV 3 «.

❒ If you want to connect a camcorder,


a video recorder with a MEGALOGIC
satellite receiver decoder for coded P

satellite reception.
Proceed as follows:

1 Select » Camcorder « and enter » yes «.


Select » Video recorder « and enter » Megalogic «.
Select » Video recorder 2 « and enter » no «.
Select » External-receiver « and enter » yes «.
Select » Decoder « and enter » yes «.
Select » ext. rec. only« and enter » yes «. Picture signal
AUDIO/VIDEO INPUTS 1 Connect the TV set socket » VIDEO IN « with the
corresponding socket of the camcorder.
Camcorder F yes E

Video recorder Meglog


Megalogic, VHS, SVHS, Hi8
Sound signal (stereo or mono)
Video recorder 2 no
VHS, SVHS, Hi8
2 Connect the TV set socket » L AUDIO IN R « to the
External-receiver yes
sound socket of the stereo-camcorder,
Decoder yes
■ ext. rec. only yes
or
connect the TV set socket » L AUDIO IN « to the
OK Connect. propos.
6 Return TXT TV-picture sound socket of the mono-camcorder. Switch the
audio-input of the TV set to » mono «, then press
6 Check once again if all external units you want to the AUX and then the button.
¢ 2
connect are selected and activated.
3 Press the AV 0 button until » AV3 « appears on the
2 Press the G button. screen.

Playback
4 Switch on camcorder, insert cassette and start
playback.
You will see and hear the picture and sound infor-
mation from the camcorder on the TV set.

k
18
❒ Connecting video recorder to the 3 Select and confirm » Data transfer of TV programme

Connection Options and Operation


MEGALOGIC socket » AV 1 «. chart TV → VCR «.
The indication » Please wait – Data transfer of TV
programme chart TV → VCR « appears on the scre-
en.
w! Wait until all TV channels have been transferred.
This can take a minute or longer.

AV2 AV1
6 The function » Setting the TV channels on the
Videorecorder « is no longer necessary.

❒ Connecting an external receiver


(SAT-Rec. or SET-TOP-Box) to the » AV 2 «
AUDIO
Socket.
EURO-AV

1 Connect the » AV1 « socket of the TV and the corre- AV2 AV1

sponding socket of the MEGALOGIC video recorder


using a Megalogic-compatible EURO/AV (Scart)
cable.
Ask your authorised dealer, if you have any
questions!

2 Press the AV 0 button until the set displays » AV1 «.


EURO-AV EURO-AV

Playback
1 Switch on the video recorder, insert the cassette
and begin the playback
1 Connect the » AV2 « socket on the TV set to
You will see and hear the picture and sound infor- corresponding socket of the external receiver.
mation from the video recorder on the TV set.
2 Press the AV 0 button on the set until » AV2 «
❒ The GRUNDIG MEGALOGIC System appears.
The TV set is equiped with the MEGALOGIC
System. Operation
If you connect a GRUNDIG video recorder to the 3 Switch on external receiver.
MEGALOGIC System using the supplied
Megalogic-EURO/AV (Scart)cable, the terrestrial TV 4 Press the TV remote control SAT button and keep
¢
channels (and all channel position related informa- pressed down and then enter the required channel
tion) are automatically transmitted to the video position of the external receiver using the … 0 9
recorder (VCR) each time you use the “Reprogram- digital buttons.
ming of the TV channel”. 6 The set is ready for satellite reception. The SER 150
6 If you later wish to connect a GRUNDIG video module has been provided for retrofitting. Ask your
recorder to the TV set using the MEGALOGIC authorised dealer, if you have any questions.
System proceed as follows:
6 The video recorder must be connected to the mains
supply.

1 Switch on the TV set.


Call up the » DIALOG CENTER « with the h and
G buttons.

2 Select and confirm »AUTOMATIC PROGRAM-


MING«.

k
19
Connection Options and Operation ❒ Connecting a decoder (descrambler) to
the »AV 2« Socket.
6 Some stations whose channels are carried by cable 3 Select » Camcorder « and enter » no «.
or SAT equipment code (scramble) their program-
mes. A decoder can unscramble such a program- 4 Select » Video recorder « and enter » Megalogic «,
me. » VHS «, » S-VHS « or » Hi8 «.

Connecting a decoder and a satellite 5 Select » Video recorder 2 « and enter » VHS «,
receiver » S-VHS « or » Hi8 «.

6 You have already connected a video recorder to the 6 Press the G button.
» AV 1 « socket. The second page » AUDIO/VIDEO INPUTS « will
You have connected an external receiver to the show you on which socket to connect the external
» AV 2 « socket and want to decode channels unit.
supplied by it. In this case the decoder must be
connected to the appropriate socket of the satellite Connection (Example 1 and 2)
receiver.

Connecting a decoder without a satellite


receiver
1 Connect the » AV1 « socket of the TV set to the
corresponding socket of the decoder.
AV2 AV1

Operation
2 Switch on the decoder.
AUDIO

3 Select the channel position with the coded pro-


gramme on the set. EURO-AV

Set the decoder with the AUX button to » on «, as


¢
described on Page 7, » Activating decoder «, point
1 . AUDIO

6
EURO-AV

Please observe the instruction manual of the


decoder.

w!
4 If all settings have been carried out, quit the function
1
using the TXT button. A camcorder must be additionally connected for
Example 3.

❒ Copying video recordings using the Operation


TV set
You can copy from:
1 Select the channel position with the AV 0
button
(» AV 1 «, » AV2 « or » AV3 «) to which the AV
Example 1 socket of the playback recorder is connected.
Video recorder from socket AV1 to
Video recorder to socket AV2. 2 Begin the playback on the playback recorder and
the record on the record on the record playback.
Example 2 You will see the picture of the playback recorder on
Video recorder from AV2 to the screen.
Video recorder to socket AV1.
3 If you want to switch the TV set to a TV channel
Example 3 during the copying function, press the AUX and
¢
Camcorder from socket AV3 AV0 buttons.
(sockets on the front side of the set) to The indication » Copy on « appears on the screen.
Video recorder to socket AV1 and/or
Video recorder to socket AV2.
6 Now you can select any channel on the TV set with-
out disturbing the copying function.
1 Call up the » DIALOG CENTER « with the h and
G buttons. 4 After completing copying, release the copy function
2 Select and call up » AUDIO/VIDEO INPUTS «.
using the AUX and AV buttons.
¢ 0
The indication » Copy off « appears on the screen.
k
20
❒ Mains voltage: ❒ Pin assignment for the EURO-AV socket

Technical Specifications
220 – 240 V, 50/60 Hz If you want to connect other devices to your televi-
(Power supply range control 190 … 264 V) sion (for example, a computer or amplifier), your
»The set may only be operated supplied power cable dealer can provide you with a normed standard
set. It prevents interference from the mains and is an connection by means of the following table:
integral component for the set’s approv-al«. Pin Signal
For a replacement, consult your nearest customer
service centre and order only the power supply 11 = Audio ouput, right
cable set with the following designation » GWN 12 = Audio input, right
9.22/ number 8290.991-316 «. 13 = Audio output, left
14 = Audio earth
15 = Blue, earth
❒ Power consumption: 16 = Audio input, left
approx. 130 W, on standby 7 W 17 = RGB blue input
18 = Switching voltage
❒ Channel coverage: 19
10
=
=
Green earth
Data line MEGALOGIC
Channels C01 … C99, Special channels S01 … S41 11 = RGB green, input
❒ Additional equipment: 12
13
=
=

Red, earth
The set has been prepared for satellite reception, 14 = Earth
connecting a PC and PIP (Picture in Picture). With 15 = RGB red input (chrome for S VIDEO)
the built-in PIP function, another TV programme or 16 = RGB switching voltage
an AV picture (e.g. from a video cassette recorder or 17 = Video earth
a video camera) can be superimposed as a small 18 = RGB switching voltage, earth
picture. Ask your dealer. 19 = Video output
20 = Video input
❒ Sound output: 21 = Shielding/earth
2 x 20 W active musicial output (2 x 10 W Sinus)
20 2

Notes on the environment by Grundig


Technology and ecology combine into a convincing
overall concept with this TV set. Ecologically high- 21 19 1
quality materials are used exclusively. The housing
contains a high amount of recyclable parts from The product fulfils the requirements of the
used plastics and the surface colours used are
following EU guidelines:
water-based, partly recycled. Wherever possible,
painting of individual housing parts has been omit- 73/23/EEC Guideline concerning electrical operating
ted. Due to the optimized housing construction, units within certain voltage limits.
flame protection materials have been omitted. The 89/336/EEC guideline on electro-magnetic compa-
number of plastic types has been reduced through tibility.
and through in order to ensure high-quality recy- The unit is accordance with the norms:
cling when the set is put out of use – all larger
EN 60065, EN 55013, EN 55020
plastic parts are marked. For optimum re-use, this
TV set has been constructed in such a way as to
make dismantling very easy.

All rights reserved!

Additional Information for Units sold in Great Britain plug is used it must be protected by a 5 Amp fuse either in the plug or at the dis-
tribution board.
Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply.
Important:
In case this appliance is supplied with a Safety Standard Approved mains lead fit- The wires in the mains lead are coloured in accordance with the follow-ing code:
ted with a non-rewireable 13 Amp mains plug which, if unsuitable for your
socket, should be cut off and an appropriate plug fitted by a BLUE – NEUTRAL
qualified electrician. The fuse and fuse holder must be removed from the plug as BROWN – LIVE
accidental insertion of the redundant plug into a 13 Amp socket is likely to cause
an electrical hazard. As the colours of the wires in the mains lead of your appliance may not corre-
spond with the coloured marking identifying the terminals in your plug, proceed
Note: The severed plug must be destroyed to avoid a possible shock hazard as follows:
should it be inserted into a 13 Amp socket elsewhere. Connect the BLUE coloured wire to plug terminal marked with the letter "N" or
If it is necessary to change the fuse in the non-rewireable plug, the correct type coloured black.
and rating (5 Amp ASTA or BSI approved BS 1362) must be used and the fuse Connect the BROWN coloured wire to the plug terminal marked with a letter "L" or
cover must be refitted. If the fuse cover is lost or damaged the lead and plug must coloured red.
not be used until a replacement is obtained. Replacement fuse covers should be In no circumstance must any of the wires be connected to the terminal marked
obtained from your dealer. with a letter "E", earth symbol , coloured green or green and yellow.

If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it must


be fitted with a 5 Amp ASTA or BSI approved BS 1362 fuse. If any othe type of
Replacement mains lead can be obtained from your dealer.
k
21
If the remedies below do not lead to a good result, contact an authorised GRUNDIG dealer or call the GRUNDIG.
Correcting problems yourself Please consider that problems can also be caused by external appliances, such as video recorders and satellite
receivers.

Problem Possible cause Remedy


no picture, no audio no mains voltage mains cable connected?
mains switch on?
TV set in standby switch on with remote control
TV set is not on a switch to another channel position
occupied AV channel position
picture is bright (grainy or blue) aerial cable aerial cable connected?
but no program can be seen check aerial system?
no TV channel programmed start channel search
picture contrast incorrect picture settings change brightness, contrast, or color
settings
problem is with the broadcaster test another channel
poor picture and/or sound interference from other appliances change the position of the appliances
(household appliances, mobile
telephones etc.)
double image, reflection channel setting automatic or manual
channel setting/fine tuning
aerial have aerial cable or device checked
no color color intensity is on minimum adjust color upward
TV standard setting select proper color standards
(if setting possibility is available)
problem is with the broadcaster test another channel
colors wrong, color spots strong magnetic field from increase distance of speaker to TV set
speakers (or other)
with permanent color spots, switch off
the TV set with the mains switch and
switch back on after after 10 minutes
problem with terrestrial magnetic field change appliance position
picture is there, no sound volume at minimum or increase/switch on volume
speakers switched off
volume regulation activated select sound output via speaker
via audio cinch socket
(if this possibility is available)
problem is with the broadcaster test another channel
SAT mode check AV cable between
TV set and receiver
sound unclear sound setting correct sound setting
poor or no Teletext TV channel (has no Teletext) check with another channel, possibly
or check aerial system double image or reflection or fine tuning
transmission signal too weak check aerial system
(picture grainy)
remote control does not work no optical connection point remote control at the TV set
remote control batteries check or replace the batteries
pay attention to polarity
undefinable operating mode switch off TV set with the main
power button for about 2 minutes

k After switching on,


“child lock” appears on the menu
child lock is activated enter secret number or number
combination 7038.
22
GRUNDIG

k 7 0 3P -8
+
P+

GRUNDIG AG • D-90762 FÜRTH Printed in Germany

S-ar putea să vă placă și