Documente Academic
Documente Profesional
Documente Cultură
P1
High Efficiency and Low Consumption
P3
Comfortable and Safe Cab Environment
P5
Ergonomic Design Maximizes
the Operating Safety
P7
Science Structure and Easy Maintenance
P9
Equipment Specification
P11
Standard & Optional
SANY HYCRAULIC EXCAVATOR SY465C
and ow onsumption Light duty mode: for the ground and soft soil conditions, input
power of main pump is about 80% of maximum engine power,
with lower fuel consumption and high economy.
Break mode: 90% of the rated power reduces
High-power Engine 6D24-TLC1B fuel consumption
250kw/2000rpm
Four Working Modes Meet The Requirement of Efficient
The Reasons for Energy Saving and High Efficiency Large-workload Operation and Fuel Economy.
With a dual-pump, dual-circuit constant power control system, the engine can fully develop its
power. The perfect combination of this two realizes the heavy-duty mode with large workload, Secondary Boosting Technology and Arm Regeneration Circuit
the standard-mode with auto-adjusted engine speed and light-duty mode, high efficiency and
low fuel consumption, while optimizing the combustion.
rod end does not return the tank but goes directly to the key switch
travel
swing left
cylinder head end. The arm speed is increased as a result. swing right
arm dumping
The fuel consumption is down by 10% under this condition. arm digging
bucket dumping
bucket digging
boom lift
boom lower
1 2
SANY HYCRAULIC EXCAVATOR SY465C
Reduce Fatigue
The seat rigidity can be adjusted according to the driver’s
weight, even if the big drivers can enjoy a comfortable
operation.
Automatic Air Conditioner Large Rear View Mirror and Alternate Exit
The standard large-capacity air conditioner keeps in-cab Rear view mirror is mounted on both sides of the cab,
air fresh by purifying fresh air and recirculation air. The which can observe the situation behind the excavator
Innovative Large Cab Cab Door and Front Well-sealed Cab, Clean quick temperature control ensures a comfortable without looking back.
temperature in cab all the year round.
The height of seat, the inclina-
Window are Easy to and Quiet
tion of backrest, the height of Open, Close and Lock
Equipped with excellent sealing
armrest, the seat position and ring, the cab is free from dust and
the headrest can be adjusted Cab door can be opened by 180°
and secured by locking mechnism rain. Quiet cab can effectively reli
as desired. -eve the fatigue of operator.
either open or closed. The upper
window of the cab can be moved
Silicone Rubber Shock to the top of the cab when the fro
Absorber -nt window is unlocked. The roof
innovative silicone rubber sho
hatch is openable, through which Multiple Air Outlets at Differ-
the cab can have better ventiltion
-ck absorber is fixed to the sw ent Levels and Locations
and more lights.
-ing platform in six points, whi
There are several air outlets – the
-ch has minimized the shock
front window defrost outlet ensuring
brought by rough road and en Longer Control Levers operator’s visibility, and the outlets Three Stage Air Filtering
-gine or hydraulic impact, con
for operator face, back and feet –
-siderably increase d the stab The control levers and joysticks Equipped with air pre-cleaner and dual air filtering
which can be turned on/off as
-ility of cab, and improved the designed and arranged according elements, the three-stage air cleaner ensures supply of
desired. By changing the direction
comfort of operator. to human engineering, can be sufficient clean air that can reduce the wear of cylinders.
of air stream, the operator can fully
operated easily. Each operation enjoy the benefit of air conditioner.
button is within the reach of opera-
tor.
3 4
SANY HYCRAULIC EXCAVATOR SY465C
rgonomic esign aximizes High Standards Safety Design Boom and Arm Holding System
he perating afety Safety design meets European, US and Japanese
safety standards, and has reached world-class
The holding valve on the main control valve can prevent
the boom and arm from declining under their own weight
security and reliability standards. and extend holding time, improving reliability of the
machine.
Falling Object
Protection Structure
The cab is punch-formed with thick high-strength steel sheet. The door and
windows are made of toughened glass. In addition to the seat belt equipped, the
cabin maximizes the safety of operator.
Larger View
Operation safety is improved as a result of narrowed blind zone of vision by
means of improved cab design featuring reduction of the size of column without
decreasing the structural strength of the cab.
Environment-friendly Engine Customized for Sany Is in Line
The front and side window enable the operator to see clearly work equipment with Epa Tier 2 and Eu Stage 2 Emission Standards.
condition and the surroundings; the rear window and the engine hood of properly
designed height provide a good rear view.
Low-noise Design to Meet Noise Emission Requirement
To meet noise emission standard of GB 16710.1-1996, the engine adopts
sound-absorbing materials and is equipped with curved wind guide cover
Optional Equipment and muffler, reducing air resistance and noise emission. Improved damping
Top guard net in line with ISO, OPG standard. system and various anti-noise designs of components reduce noise
efficiently. Noise level around the operator is less than 80dB (A) (reference
value is 80dB (A)).
5 6
SANY HYCRAULIC EXCAVATOR SY465C
7 8
SANY HYCRAULIC EXCAVATOR SY465C
DIMENSION
SPECIFICATION
Model.............................................................Mitsubishi 6D24-TLU2G Operating weight with standard bucket, fully serviced, +75 kg
Displacement............................................................................11.94L operator (ISO)
Engine power Operating weight....................................................................45500kg
At rated engine speed...........................................250kw/2000rpm
UNDERCARRIAGE
HYDRAULIC SYSTEM
Track width...............................................................................600 mm Item˄Unit˖mm˅ SY465C
Type .............................................................. Negative control system Number of track shoes.....................................................................50
A Length (During Transportation) 12200
Number of selectable working modes........................................... 4 Carrier roller (per side).......................................................................2
Main pump Track roller(per side)..........................................................................9 B Width 3690
Type...............................................Variable-capacity piston pumps C Height (During Transportation) 3880
Maximum flow..............................................................2*360Itr/min D Upper Body Width 3180
Hydraulic motors TRANSMISSION E Cab Height 3230
Travel..............................2* axial piston motor with parking brake F Std. Track Width 600
Travel Speed (Highest/Lowest)..........................................4.5/2.9km/h
Swing....................2* axial piston motor with swing holding brake G Track Gauge
Swing Speed..............................................................................9.3rpm 2740
Relief valve setting
Gradeability..............................................................................70%/35° H Min. Ground Clearance 565
Implement circuits.........................34.3mpa 336kg/cm2 4,974psi
Ground Pressure.........................................................................77rpa I Tail Swing Radius 3780
Travel circuit..................................34.3mpa 336kg/cm2 4,974psi
Swing circuit .................................28.5mpa 279kg/cm2 4,133psi J Roller Gauge 4412
Heavy lift circuit ............................34.3mpa 336kg/cm2 4,974psi SERVICE CAPACITIES K Track Length 5440
Pilot circuit .....................................3.9mpa 38kg/cm2 565psi
Hydraulic cylinders Fuel tank.......................................................................................690L
Boom...............................................................2-160mm*1570mm Hydraulic tank...............................................................................440L
Arm.................................................................1-190mm*1800mm Engine oil................................................................................. ......49L
Bucket.............................................................1-170mm*1270mm Radiator.......................................................................................20.9L
Final drive....................................................................................2*10L OPERATION RANGE
Swing drive.................................................................................2*4.4L
DIGGING FORCE
Item˄Unit˖mm˅ SY465C
Bucket Digging Force................................................................262kN
Arm Digging Force.....................................................................232kN a Max. Digging Height 10677
b Max. Dumping Height 7402
c Max. Digging Depth 7285
Suitable for materials with density of 1 800 kg/m3 (3 030 lb/yd3) or less
Suitable for materials with density of 1 600 kg/m3 (2 700 lb/yd3) or less
Suitable for materials with density of 1 100 kg/m3 (1 850 lb/yd3) or less △
Materials and specifications are subject to change without further notice in accordance with our continuous technical innovations.Photos and illustrations may not include additional equipments.
9 10
SANY HYCRAULIC EXCAVATOR SY465C
&
SY465C LIFTING CAPACITY STANDARD EQUIPMENT
MAX 9.0m 7.5m 6.0m 4.5m 3.0m Engine Hydraulic System Operator Station
A
Noiseproof steel-structured cab
B Mode control (H, S, L and B) Working mode selection switch
Toughened light-color window
Start motor 24V/7.5KW Power enhancement device
6 sillicone rubber damping support
6.0m kg 8840 8840 10730 10730 Alternator 70A Control valve with main relief valve
Openable roof hatch, upper front
Air pre-cleaner Spare oil port for control valve
3.0m kg 8940 8450 9430 9430 10890 10890 13480 13480 Window and left window
Dry double-filtering air cleaner Oil suction filter
Rear window,alternate exit
0m kg 9170 8510 9720 9060 11750 11450 14750 14750 19240 19240 Cylindrical engine oil filter Oil return filter
Silent window wiper with washer
Cylindrical fuel filter Pilot filter
-3.0m kg 9210 9210 10380 10380 13040 13040 16220 16220 19540 19540 Adjustable inclined seat with
Engine oil cooler
-6.0m kg adjustable armrest
Radiator with protective screen Front Work Equipment AM-FM radio with digital clock
Auxiliary water tank for radiator
Foot rest and floor mat
Fan cowl Flange pin
Loudspeaker,rear view mirror
Remarks: Separately installed engine Bucket clearance adjustment
Seat belt and fire extinguisher
1.Rated figure meets the criterion of GB/T 13331-2005/ISO 10576 Automatic deceleration system Welded lever
Cup holder and cab light
2.Rated rollover loading is 75% of static rollover loading, rated limiting hydraulic weight is 87% of limiting hydraulic weight. Accelerating system Central lubrication system
Ashtrayǃalternate hammer
3. Loading radius is the distance from the loading point to the swing center. Dust ring-seal of bucket pin
Storage box, literature bag
4. The figure with * stands for the rated figure of the limiting hydraulic weight. 7.06 m fully-welded box boom
Undercarriage 2.9 m fully-welded box arm
Hydraulic lockout control
Fully automatic air-conditoner
Travel brake Guard
Cab visor
Travel motor guard 2.2m3 standard bucket˄SY465C˅
WELGHTS AND GROUND PRESSURE H-track guiding mechanism
Hydraulic track tensioner Alarm Lights Others
Mode SY465C Bolted sprocket
Oil pressure lack, engine coolant Standard battery box
Carrier roller and track roller
Shoe type Shoe width overheat Lockup engine hood
Operating weight Ground pressure Reinforced track link with pin
Throttle knob fault Lockup fuel filler cap
and seal
Fuel oil lack Anti-skid film, handhold and passage
600mm 45500Kg 77Kpa 600 mm track shoe
Voltage higher than specification Travel direction mark
Tripe grouser
Engine over speed Hand grease gun
800mm 45500Kg 58Kpa
Electric diesel pump(SY465C)
Swing Platform
900mm 45500Kg 52Kpa
Fuel level float Indicator Lights
Hydraulic oil level gauge
Toolbox H working modeǃS working mode
Rear view mirror (R) L working mode
Swing brake Auto-idleǃengine warm up
SERVICE REFILL CAPACITIES Reinforced side pedal Oil level, engine coolant temperature
Liters US gal Lmp gal
Travel speed
Fuel tank................................................................................................................ 680 179 1150
Engine coolant........................................................................................................... 24 36.3 5.3 Air Conditioning system Lamp
Engine oil................................................................................................................... 49 12.9 10.8
Air conditioner ˄importd˅ Five work lamps
Swing device............................................................................................................. 14 3.7 3.1 Air conditioner control panel
Travel device(each side)............................................................................................ 13 3.4 Fresh air system
2.9
Hydraulic system........................................................................................................
640 169 141
Hydraulic oil tank........................................................................................................
400 106 88
11 12