Documente Academic
Documente Profesional
Documente Cultură
Grilles
Application
• Recommended for heating, cooling, or
ventilating applications.
• Versatile directional, throw distance, and
spread pattern control.
• Typically installed high in a sidewall, soffit,
or Duct.
Product Features
• Single deflection supply grilles and registers
exceeding the industry standard using
corrosion resistant aluminum materials
Model KX1H
• Single set of horizontal or vertical blades Horizontal Front Adjestable Blades, 19mm Spacing
• Aerodynamic blade design resulting in Model KX1HO with Opposed Blade Damper
lowest achievable sound and pressure levels Horizontal Front Adjestable Blades, 19mm Spacing
• 19mm spacing of individually adjustable
blades
• Blades rotate smoothly without bending.
• Registers include a factory attached,
opposed blade volume control damper
• Powder coated to RAL 9010 as standard
• Maximum size one piece construction is
1200mm x 1200mm
• Larger sizes shipped in multiple sections for
field assembly.
Options
• Mounting holes in frame neatly countersunk
• Custom Colours
Selection Procedure :
The selections can be made by means of a
straight read-off from the “Performance Data”
for the selected Model.
• Determine the Air flow rate per outlet.
• Establish the required Throw (Refer Notes for
Throw Pattern) Opposing Grilles : Maximum
Throw for each Grille should be no more than Product Selection Check List
75% of half of the distance between them. • Select Unit length based on desired performance characteristics.
• Select the Grille based on required Air flow • Select outlet type by Model Number (Core styles blade spacing & damper)
rate against the outlet velocity, limiting • Select blade orientation.
pressure drop and sound level requirements. • Select fastening type (Face hole MTA / Consealed)
• Select Finish
www.kmcqatar.com 1
KX1
Grilles
2 www.kmcqatar.com
KX1
Grilles
www.kmcqatar.com 3
KX1
Grilles
4 www.kmcqatar.com
KX1
Grilles
For large grilles with a cooling differential, the drop of the air stream Sound Levels
should be evaluated. NC shown is for 0° blade angle setting and is noise criteria curve
Data includes opposed blade volume control damper in full open that will not be exceeded at the operating point. This is
position. determined by assuming a 10dB (ref: 10-12 watts) room attenuation
that is subtracted from the power levels in each of the
Throw 2nd thru 7th octave bands. For 22.5° blade angle setting, add 2 NC
The numbers shown are throw distances, in meters, measured along to the tabulated value shown. For for 45° blade angle
the jet trajectory axis relating to terminal velocities of setting, add 6 NC to the tabulated value shown.
0.75,0.5, & 0.25 m/s, with the jet attached to the ceiling surface.
0°, 22.5°,45° represent the blade deflection or spread angle settings Neck Velocity, Core Velocity
Terminal velocity is the air speed, in meters per second, measured Meters per second (m/s)
in the supply air stream.
Pressure
Opposed Blade Volume Control Dampers (OBD) Ps represents Static Pressure, Pa
Data shown includes OBD (wide open)
MODEL
FACE BLADES
WIDTH
19mm Blade Spacing
• Horizontal
100 mm to 1200mm • KX1 Aluminum Single Deflection
• Vertical
HEIGHT
100 mm to 1200mm
FINISH
• Pure White (RAL 9010)
• Optional RAL Colors
• Custom Color Match
• Mill Finish (Aluminum Only)
• Natural Anodized (Aluminum Only)
ACCESSORIES
• OPPOSED BLADE DAMPER
• OBD - ALUMINUM
• NO BORDER MOUNTING HOLES
The grilles shall consist of an outer border or frame, with face Where scheduled and as shown, provide optional aluminum,
directional blades horizontal or vertical as detailed. Blades face operated opposed blade volume control dampers.
shall be individually adjustable and designed to minimize noise
and pressure loss, and shall consist of an extruded aluminum Finish shall be powder coated with RAL 9010 or custom color as
closed profile. specified by the Architect.
www.kmcqatar.com 5
KX1
Grilles
Notes
6 www.kmcqatar.com
KX1
Grilles
Notes
www.kmcqatar.com 7
KX1
Grilles
Notes
8 www.kmcqatar.com