Documente Academic
Documente Profesional
Documente Cultură
T50
Surface drill rig for limestone
and cement quarrying, open
pit mining, and aggregate
quarrying.
PowerROC T50 is developed and de- tion rate. Meanwhile, the perfectly
signed for the demanding applications matched engine in either Tier 3 or Tier
of limestone and aggregate quarries, 4 provides more tons per liter fuel ,
as well as mines.Thanks to the new- which results in high efficiency and
developed rock drill COP 3060, the productivity, while conforming to your
PowerROC T50 provides high penetra- local emission standards.
Main benefits
Reliability – tough, Atlas Copco quality
2 3
TECHNICAL SPECIFICATIONS
with striking efficiency • Track frames with triple grouser pads, cleaning holes and hydraulic
track oscillation and two speed traction
• Extendable boom system
• Motor driven aluminium feed system
Thanks to its modular design and a high degree of commonality • Tier 3 (Stage IIIA) diesel engine / Tier 4 (Stage IV) diesel engine, CAT • Carousel type rod handling system
with other Atlas Copco products, reserve parts are only a phone C9 / CAT C9.3 • Hydraulic rock drill
• Screw type air compressor • Dust collection system
call away thanks to our global service network.
• Operator’s cabin, ROPS and FOPS certified
electrical system
+ Get it right the first time feed Voltage 24 V
Our rock drills are known for their high efficiency and constant hole bottom Feed extension 1 900 mm 6’3’’ Batteries 2 x 12 V, 235 Ah
contact due to the double dampening system. Not only does PowerROC T50
Feed rate, max 0.7 m/s 138 ft/min Alternator 24 V, 95 A
have the powerful COP 3060 rock drill, we’ve also matched it with an Atlas
Feed force, max 50 kN 11 240 lbf Work lights, front 4 x 70 W
Copco air compressor that provides sufficient amounts of air to ensure a high
Tractive pull, max 50 kN 11 240 lbf Work lights, rear 2 x 70 W
quality hole. The PowerROC T50 is also equipped with aluminium feed instead
Total length 9 370 mm 30’9’’ Work lights, feed 2 x 70 W
of a steel feed, for much straighter and more consistent holes.
Travel length 5 080 mm 16’8’’ Warning lamp and reverse alarm buzzer
Drill steel Drilling diameter Max. hole depth Drill steel length
Type of drilling
type
Even the best equipment requires regular service to en- mm inch m feet mm feet
sure optimal performance. Atlas Copco provides service Single pass 5.08 16’8” 4270/3660/6096 14’/12’/20’
solutions
+ WORLD to safeguard
CLASS SERVICE an optimized relationship between T51, T-Wiz 60 102 – 152 4’’– 6’’ 4270 x 7 14’ x 7
productivity, Extension drilling 35 118’
FlexiROC T35 and FlexiROC T40 are flexible and versatile and operational cost. Atlas Copco
availability 3660 x 7 12’ x 7
Mining and
tophammer drill rigs, Rock
developed Excavation
and designed for high per- Technique has over 3300
technicians located
formance in demanding construction applications.inTheyover
are 80 countries. By combining
the Hydraulic rock drill
also a veryusage of Atlas
efficient alternative Copco
for small and medi um size genuine parts with service
provided
quarrying jobs. Even inby toughaterrain
certified Atlas Copco technician, you’ll
conditions, utilization Rock drill Impact power Hydraulic pressure Impact rate Torque, max Weight approx
have
of the rig is ahigh,winning combination
thanks to the long reach of the boom, no matter of where in the
world
FlexiROC T35 and you FlexiROCoperate.
T40 are flexible and versatile 240 bar 3 481 psi 50 Hz
COP 3060 30 kW 40.2 hp 2 770 Nm 2 043 lbf/ft 355 kg 783 lb
tophammer drill rigs, developed and designed for high 225 bar 3263 psi 43 Hz
performance in demanding
4 5
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
optional equipment
Carrier
• Hydraulic support leg Lube oil, lube system and water mist system
• Super rotation system • Central lubrication system
• Service hand lights inside canopy • Thread greasing device, spray system
• Combined warning sound and warning light, beacon type • Artic hydraulic oil, VG 32
• Engine air filter pre-cleaner • Tropical hydraulic oil, VG 68
• Compressor air filter pre-cleaner • Biological hydraulic oil, VG 46
• Electric pump for filling hydraulic oil • Water mist system with water pump and 400L water tank
• Electric fuel filling pump
• Fast fuel filling system Feed
• Cold weather kit +5oC to -25oC, including diesel engine heater and • Wide feed foot
compressor regulation heating kit • RHS for T51 - 12’/14’ SPEEDROD
• Rock drill lubrication oil collection system • RHS for T51 - 12/14’ with 72 mm coupling
• RHS for T-Wiz 60 - 12’/14’ SPEEDROD
Safety cabin • RHS for T-Wiz 60 - 12/14’ with 85 mm coupling
• Radio • Sleeve retainer
• Reverse camera with cab mounted monitor
Delivered equipment, not mounted
Hole measuring systems • Conversion kit T51 Feed swing angles Rear view
• 2D angle indicator • Conversion kit T-Wiz 60
• 3D angle indicator
6 7
9851 3435 01 b, 2015-12 Nanjing, China. Legal Notice © Copyright 2015, Atlas Copco Construction and Mining Equipment Co., LTD. Any unauthorized use or copying of the contents or any part thereof is prohibited. Il-
lustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco
Customer Center for specific information.
www.atlascopco.com