Documente Academic
Documente Profesional
Documente Cultură
INDEX
1 GENERAL......................................................................................................................... 4
2 SCOPE ............................................................................................................................. 4
3 DEFINITIONS ................................................................................................................... 5
NOTES ............................................................................................................................ 96
1 GENERAL
This specification defines minimum technical requirements for the design, materials,
fabrication, procurement, inspection, testing and supply of the PIPING MATERIAL to be
used and installed in the Proyect “IPC DE PLANTA DE PROCESAMIENTO DE CRUDO
DEL CENTRO OPERATIVO PETROMONAGAS (COPEM) – INGENIERIA BASICA”, to
increase temporarily the processing capacity while the third production train with the
processing capacity of Petromonagas Central Production Facilities will increase to 210
MBPD extra heavy crude, taking into account modularization skid-type according to the
contract-type of facilities adopted by Schlumberger.
2 SCOPE
This specification covers the requirements for piping line classes for the EPC OF CRUDE
OIL PROCESSING PLANT OPERATIONS CENTER PETROMONAGAS (COPEM) -
BASIC ENGINEERING Project. The following piping components are included in the scope
of this specification.
Pipes,
Fittings such as Elbows, Tees, Reducers, Caps, Nipples, Couplings, Olets, Plugs,
Flanges,
Gaskets,
Gate, Globe, Lift Check, Swing Check, Dual Plate Check, Ball, Butterfly Valves,
The piping special items such as tagged valves, pressure relief valves, and Control valves
are out of scope of this specification.
Piping shall comply with ASME B31.3 latest editions, as with additional requirements as
detailed herein. Piping for fire protection applications shall comply also with NFPA codes
and standards.
The piping line classes will be revised, deleted, or newly added in Appendix-1 and piping
line class detail as the detailed designs such as P&IDs are developed.
It summarizes the Piping Line Classes to be used on the project through a Line Class
Index, and details new additional Piping Line Classes to be used on the project.
Attachment 1 is the Line Class Index, giving the history of the Piping Line Classes that
have been use in the past for the Cerro Negro COPEM project, including the construction
and the first expansion, and those to be used for the current project. It summarizes the
names, design conditions, materials, flange ratings, corrosion allowances and the required
Non-Destructive examinations (NDE) for the classes. Any deleted class shall not be used
for the COPEM Capacity Expansion Project.
3 DEFINITIONS
VENDOR AND/OR MANUFACTURER: The appointed supplier of the machinery and the
rest of equipment to which this specification applies. Responsible of the Basic Engineering,
Detail Engineering and Procurement of all piece of equipment and system within the given
battery limits.
The following documents are referred in this specification. Where no specific revision numbers or
dates is specified in this specification, the latest versions of the industrial codes / standards as of
1-Aug-2015 shall govern.
API Standard 594 Check Valves: Flanged, Lug, Wafer, and Butt-welding
API Standard 602 Steel Gate, Globe and Check Valves for Sizes DN100
and
smaller for the Petroleum and Natural Gas Industries
API Standard 622 Type Testing of Process Valve Packing for Fugitive
Emissions
API 608 Steel Ball Valves - Flanged and Butt welding Ends
ASME Section VIII Boiler & Pressure Vessel Code-Rules for Construction of
Pressure Vessels
ASME B18.2.1 Square and Hex Bolts and Screws (Inch Series)
ASTM Standards
5 PIPING DESIGN
Do not use pipe, valves, or fittings in NPS 1-1/4, 2-1/2, 3-1/2, 4-1/2, 5, 7, 9, 18, and 22, except to
meet manufacturer's equipment connections. Under these circumstances, enlarge at once to the
larger required standard size.
A piping header shall not be smaller than NPS 1 except for instrument air or gas piping and heat
tracing supply which shall not be smaller than NPS 1/2.
Pump suction lines shall be sized and/or vessel elevation shall be determined to provide the
N.P.S.H. required when pumping at the maximum rate specified for the pump. The available
N.P.S.H. shall be computed from a point at least one foot below the lowest specified operating
level in the suction vessel to the point on the pump that the manufacturer specifies the required
N.P.S.H. The economics of increasing line size versus adjusting vessel elevation shall be
considered in providing sufficient N.P.S.H. Line shall not be smaller than the pump nozzle and
velocity shall not exceed 10 feet/second.
When sizing reciprocating pump suction and discharge lines particular attention must be paid to
the pre cautions stated in Section 2.3b of API RP 14E.
Seawater in 90-10 copper nickel or bare carbon steel pipe shall have a maximum velocity of 10
feet/second. Other corrosive liquids shall have a maximum velocity of 5 feet/second in unlined
pipes. Seawater in lined pipe shall have a maximum velocity of 15 feet/second.
Wall thicknesses of the following pipes are calculated in accordance with ASME B31.3, based on
the internal pressure of full pressure-temperature rating in ASME B16.5.
Wall thicknesses of the following pipes are calculated in accordance with ASME B31.3, based on
the design conditions in the Process Line List.
The minimum wall thickness shall be the greatest of Column A, B or C in the below table. (Refer
to PDVSA H-221 Appendix I Paragraph 5.4.2 and 5.4.3).
Note 1: C.A. = Specified Corrosion Allowance. (Thread height shall be added for
threaded pipes)
Note 3: D/t (nominal diameter / (wall thickness – mill tolerance – C.A.)) shall not
exceed 150.
Wall thickness calculations do not account for any additional imposed loads such as thermal
loads, live loads, and seismic loads. These loads shall be taken into account, if necessary, after
mechanical analysis of piping systems.
Vacuum conditions shall be considered in pipe wall thickness, if applicable (this shall be reviewed
in the next Engineering phase according to Process Line List).
Wall thicknesses of beveled ends of buttwelding fittings and flanges are same as that of the
corresponding pipe. Minus manufacturing tolerance of beveled end wall thickness shall be
compatible with the minus manufacturing tolerance of connecting pipe wall thickness.
In utility service, NPS 1 and smaller ferritic nipples between equipment and the first block valve
and between a header and the first block valve or fitting shall have a minimum thickness of
schedule 160. For these nipples in nonferritic piping, the minimum thickness shall be
Schedule 80 (socketwelded) and 160 (threaded).
(1) Operating pressure - maximum process pressure shown on the Process Flow Diagram.
(2) Design Pressure - highest pressure to which the piping system is subjected which may
be:
1) The relief valve set pressure, or
2) The sum of the normal pump suction pressure and the pump shut-off pressure.
(3) Operating Temperature - maximum process temperature shown on the Process Flow
Diagram, including temporary conditions such as a regeneration cycle which shall be
shown as an alternative operating condition.
(4) Design Temperature - highest or lowest temperature to which the piping system is
subjected which may be:
1) Operating temperature,
Particular care shall be taken when establishing design pressures for lines with long vertical runs
full of liquid or subject to hydrostatic test, e.g., pipeline risers.
The use of allowances for short term excursions of pressure and temperature permitted by
Paragraphs 302.2.4 and A302.2.4 of the ASME B31.3 code may be used if the validity of the
excursion duration can be verified.
The allowance for corrosion or erosion in piping shall be determined by the intended service and
according to Attachment 1 "LINE CLASS INDEX". It shall be added to all surfaces exposed to the
fluid of process
The corrosion allowance to be used is specified in the individual piping line class. However, it is
allowed in specific cases to use adjusted corrosion allowance after the following engineering
evaluation. A reduction of no greater than 10% of the specified corrosion allowance is permitted in
the case where a pipe of the next higher schedule or standard thickness can be avoided with the
reduced corrosion allowance.
Joint connections of piping components are in accordance with the following table.
Rating of
Pipes, Fittings, and
Piping Line Size Valves
Flanges
Class
Class 600 NPS1-1/2 and smaller Socket-welding Socket-welding
and lower NPS2 and larger Butt-welding Flanged
Class 900 NPS1-1/2 and smaller Socket-welding Socket-welding
and 1500 NPS2 and larger Butt-welding Butt-welding
Class 2500 NPS1-1/2 and smaller Butt-welding Butt-welding
and higher NPS2 and larger Butt-welding Butt-welding
(a) Threaded joint may be used for drain plugging, vent plugging, and instrument connections.
(b) Threaded joint is applied to NPS2 and smaller (pipes, fittings, flanges, valves) for
galvanized piping.
(e) Valves for hydrogen service shall have Butt-welding ends for NPS2 and larger.
The number of non-welded joints (e.g., flanged and threaded) shall be kept to a minimum with
only those necessary for cleaning, maintenance, operation, and inspection. Welding end valves
shall be used in services where valve maintenance shall be minimal or where valve maintenance
can be done in place.
For joint requirement services, threaded construction shall be limited to vent and drain piping
downstream of primary vent and drain valves and to instrument piping downstream of the primary
instrument block valve, e.g., pressure gauge connections and orifice flange taps. Threaded
construction is also permitted in NPS 2 and smaller utility piping.
The junction of piping of different pressure classes shall be made only at a valve that conforms to
the specifications of the higher pressure class. The junction of piping of the same pressure class,
but of different materials shall be made at a flanged joint.
Adhesive belled-end or socket joints in metallic piping are prohibited (318 of ASME B31.3).
Proprietary joints such as Dresser and Victaulic couplings shall not be used in flammable or toxic
service. In non-flammable, non-toxic service they shall not be used above 150 F nor above 150
psig. These shall not be used to absorb axial expansion on in any service.
Proprietary joints such as the Grayloc connector may be considered as alternatives to ASME
B16.5 and API 6A flanges for pressure classes 600 and higher.
Threaded flanges in which the pipe ends project through to serve as the gasket surface shall not
shall be used.
Expanded joints and flanges having expanded joint inserts shall not be used (308.2.2 and 313 of
ASME B31.3).
Pipe unions (and other piping joints involving straight threads - see Fig. 335.3.3 of ASME B31.3)
shall not be used in severe cyclic conditions. NPS 2 and smaller joints of this type may be used in
Category D (air, water, open drain) fluid service. For non-Category D fluid service, they shall not
be used in NPS 1-1/2 and larger (314.2.2 of ASME B31.3).
Piping expansion stresses and end reactions shall be calculated using the conditions that result in
the largest differential temperature, considering:
(4) Maximum and minimum operating metal temperatures caused by ambient conditions (e.g.,
solar radiation).
Where pumps, compressors or turbines are connected with common headers, any likely variation
in piping temperature, which results from combinations of operating and non-operating equipment
shall be considered.
Where the routing of a piping system does not inherently provide adequate flexibility, the needed
flexibility shall be provided by additional bends, loops, or offsets.
The use of any convoluted or proprietary expansion joint for non-Category D fluid service shall not
be considered. In Category D fluid service, their usage must be approved by COMPANY.
Additionally, swivel joint, gun-packed and ringpacked slip-type expansion joints are prohibited.
A computerized comprehensive analysis of stresses and reactions shall be required for the
following piping:
(2) All other piping with a stress index (d x t) greater than 2000 for austenitic and 3000 for
ferritic materials, where:
d = nominal diameter, inches
t = differential temperature (F)
The selection of the computer flexibility analysis program is subject to COMPANY approval. Any
computerized stress analysis shall clearly print out input data and computed stresses and
reactions for all significant points in the piping system. The analysis shall include applicable test
loads, wind, seismic, and weights of piping components (e.g., valves). Also, the analysis shall
include linear and angular movements of the equipment to which the piping is attached, significant
friction forces at support points, likely deflection of supporting structures, and expected
settlement. The analysis shall compute the displacement stress range (SE) and the sum of the
longitudinal stresses (SL) for both the sustained loads and for the sum of the sustained loads and
the occasional loads. Thermal, pressure, and weight (including applicable wind or seismic,
whichever is greater) loads at design conditions shall be combined to calculate the nozzle loads
on all connected equipment (e.g., pumps, compressors, ex changers, pressure vessels).
Nozzle loads for the thermal case, the pressure and weight case, the pressure and weight case
plus seismic or wind (whichever is greater), and the combined thermal, pressure and weight
cases shall be compared with the equipment manufacturer's recommendations. Piping reactions
against equipment shall not exceed the manufacturer's recommendations or limits in local codes,
whichever is less. Where rotating equipment manufacturers make no recommendations, the
reactions shall not exceed the limits in the appropriate API Standard (e.g., API 610).
Relief valve discharge piping shall be designed to accommodate thermal effects of discharge,
such as auto- refrigeration of expanding liquified gases or sudden heating during high-
temperature release, and for discharge reaction.
The installation arrangement of any expansion joint shall be subject to approval by COMPANY
and should be reviewed by the joint manufacturer. This approval and review shall include service
conditions, anchors, guides, supports and piping configuration and all necessary calculations.
5.7 Flanges
(2) Threaded end steel flanges may be used for 6” and smaller piping for water service of
which design temperature is 120 °C or lower.
(a) The following bolted flange connections shall be installed using bolt tensioners.
(b) Class 900 and higher bolted flange connections other than those listed in Paragraph 4.6
(3) (a) shall be tighten by torque wrench or equivalent tool to assure that the flange is
tightly sealed, but bolt tensioner will not be used.
Class 600 and lower bolted flange connections will not be tightened by bolt tensioner, torque
wrench, or equivalent tool.
When bends are substituted for butt-welding elbows, the pipe wall thickness at the thinnest point
after bending, less corrosion allowance, shall not be less than the calculated thickness required
for pressure and temperature. Fabricated fittings, branch connections, and pipe bends shall meet
the requirements of Section 5.13 "Installation and Quality Control".
Pipe bends shall only be made from the pipe specified for the service except that only seamless
pipe or EFW pipe (which has had 100% radiographic or ultrasonic inspection of the longitudinal
seam and an Ej = 1.0) may be used.
Neither creased nor corrugated pipe bends may be used (306.2.2 of ASME B31.3).
Mitered elbows (or bends) shall not be used without prior COMPANY approval (306.3.1 of ASME
B31.3). When used, they shall:
(1) Conform to the requirements of Section 5.13 "Installation and Quality Control".
(3) Have a nominal radius of not less than one and one-half times the diameter of the pipe.
The use of screwed fittings shall be limited to galvanized malleable iron fittings except couplings
may be used in instrument air and water services.
The wall thickness of the small end of a swaged nipple shall not be less than that of the larger
end.
Threaded bushings, street ells, close nipples, and all-thread nipples shall not be used.
Threaded elbolets or full length couplings threaded one end only may be substituted for
threadolets for instrument, vent and drain connections on elbows.
Solid round pipe plugs shall be used for threaded end closures in flammable, toxic, or corrosive
service. Plug material shall have a corrosion resistance equal or greater than the pipe.
5.10 Gaskets
Chlorite-graphite filled stainless steel spiral wound gaskets (API 601), shall be used, except ring
joint gaskets shall be furnished for ring joint flanges, as per pipe class. No non-asbestos sheet
gasket materials shall be used. Spiral Wound gaskets shall be with inner and outer stainless steel
ring.
Class 1500 and lower piping line classes = Spiral wound gaskets
Exception is that rubber sheet gasket is used for plastic piping and galvanized
piping.
Class 2500 and higher piping line classes = Ring Joint gaskets (Octagonal Type)
For steel piping operating above –20F, alloy steel studs ASTM A193 Grade B7, with ASTM A194
Class 2H semi-finished heavy hex nuts shall be used except for sulphide stress cracking service
where stud bolts shall be ASTM A193 Grade B7M. For steel piping operating below –20F, ie:
blowdown service, ASTM A320, Gr L7 studs, with ASTM A194, Gr 7 semi-finished hex nuts shall
be used, except for sulfide stress cracking services where stud bolts shall be ASTM A320, Gr
L7M.
Bolting threads and lengths shall conform to the dimensions listed in the appropriate national or
industry flange standard. Headed bolts (rather than stud bolts) shall not be used without prior
COMPANY approval.
All bolts and nuts shall be coated with PTFE, or equivalent material.
For Austenitic bolting materials shall be in accordance with piping material classification data
sheets and Appendix 2 "LINE CLASS DETAIL".
5.12 Valves
(1) Gate, Globe, and Check valves are designed in accordance with the following standard. (Refer to TM-JY/PD-
0186 for gate valve standards)
(note-3) ASME B16.34 in lieu of API602 for Class 2500 and higher
(2) Pressure seal bonnet / cover valves may be used only for steam or other non-corrosive
clean service, Class 900 and higher. Therefore, pressure seal bonnet / cover valves are
used for the Class 900 and higher piping line classes that have corrosion allowances 3.0
mm or less.
(b) Ball valves shall have full-port, except for vent/drain valves and instrument block valves.
(c) Ball valves with resilient seats that are not fire-tested design per API Standard 607 or
6FA shall not be used in flammable, combustible, or dangerous services.
(d) Ball valves with resilient seats may be used in dangerous services, except as block
valves to the atmosphere, or the first block valves for the large volume fluid
containment.
(e) Resilient lined butterfly valves are designed in accordance with API 609 Category-A.
(f) Resilient lined butterfly valves that are not fire-tested design per API Standard 607 or
6FA may be used for water service only.
(g) Resilient lined butterfly valves shall not be used for non-utility services.
(5) Eccentric design butterfly valves are designed in accordance with API 609 Category-B.
(7) Dual plate check valves are designed in accordance with API 594.
Valves required to be full bore for line pigging or other purposes shall be so marked on the
Project P&I Diagrams, except that relief valve isolation valves shall be full port.
Steel valves manufactured in accordance with API 6D, 594, 599, 600, 602, 603, 606, 608,
and 609 also are acceptable within the pressure-temperature ratings stated in these
Standards.
Materials not listed in the referenced valve standards shall not be used without prior
COMPANY approval.
Valve trim for natural gas and condensate line shall be suitable for natural sour (NACE
Standard MR-0175) gas service, and for operation at temperatures down to –50 ºF
All Installation and Quality Control Shall be in accordance with ASME B31.3 CHAPTER V
FABRICATION, ASSEMBLY, AND ERECTION and CHAPTER VI INSPECTION, EXAMINATION,
AND TESTING. As applicable
All fabrication shall be subject to inspection by the VENDOR AND/OR MANUFACTURE and by
COMPANY.
COMAPANY inspection shall not relieve the Fabricator of the responsibility of fulfilling all
requirements of this Specification.
Accurate welding records shall be maintained. Records shall identify welder, X-ray numbers,
location and position and other inspection techniques used e.g. dye penetrant, magnetic particle,
number and location of repairs. All records shall include inspection acceptance.
Longitudinal seams in adjoining lengths of welded pipe shall be staggered and shall be so located
as to clear openings and external attachments. Clearance and stagger shall not be less than 1 in.
Longitudinal seam welds shall be located in the top quadrant of the pipe, when practicable.
Pipe, piping components, and fittings shall at all times be protected by caps or other appropriate
covers, and shall be properly handled to prevent the unnecessary ingress of rainwater, soil, rocks,
and other foreign matter.
Accumulated foreign matter shall be cleaned from the pipe and fittings before final installation.
The qualification of welding procedures, welders, and welding operators shall be in accordance
with ASME B31.3 except as modified below.
Welder and welding operator performance qualifications from other employers are not acceptable.
The requirements of ASME B31.3 Paragraphs 328.2.1 (b), (c), and (d) have precedence over
similar requirements of local codes. In addition, the modifications to Paragraphs 330 and 331 of
ASME B31.3, and apply to Paragraph 328.2.1(c).
Charpy V-notch impact tests shall be performed as required by Paragraph 323.3 of ASME B31.3,
and the values specified shall be equaled or exceeded.
It is preferred that the ends of pipe, as well as the edges of plate that is to be formed into pipe, be
shaped by machine. Other methods of shaping may be employed, provided that a reasonably
smooth and clean surface is attained.
No flame cutting of quenched and tempered carbon steels (for example, ASTM A672 Classes 50,
51, 52 and 53), high-strength microalloyed steels (for example, ASTM A714, API 5L Grade 65 or
70), or steels containing more than 1/2 percent chromium shall be done unless the flame-cut
surface is machined or ground to sound metal. At least 1/16 in. of metal shall be removed.
Slip-on flanges, if used shall be positioned so that the distance from the face of the flange to the
pipe end shall be equal to the nominal pipe wall thickness plus 1/8 in. ±1/16 in. The seal weld
shall be applied so that the flange does not need refacing.
All welds in pressure piping (and all welds for structural attachment to it) shall be accordance with
ASME B31.3, and the following paragraphs.
Unless approved by COMPANY, the weld at the perimeter of a branch reinforcing pad shall be a
full fillet weld.
Sizes of fillet welds for attaching socket-welding components and slip-on flanges (if slip-on
flanges are used) shall be not less than shown in ASME B31.3 and:
b. The size of the fillet weld used in attaching the hub of slip-on flange to the pipe shall not be
less than 1/4 in.
When seal welding of threaded connections is required, the following shall apply in addition to
Paragraphs 328.5.3 and 335.3.2 of ASME B31.3:
a. The seal weld shall be at least a two-pass weld covering all exposed threads.
b. Valve and union ends shall be welded with an electric arc welding process to minimize
distortion. Valves shall be closed hand tight during welding. Unless approved by
COMPANY, non-metallic seats shall be removed during welding.
Fabricated lips or stub-ends, shown as types (a), (b), (c) and (e) in Figure 328.5.5 of ASME
B31.3, shall not be used.
The preheat temperatures listed in Table 330.1.1 of ASME B31.3 are mandatory minimums.
Materials shall be preheated to a minimum of 175° F, regardless of thickness and tensile strength,
if the weld is under a high degree of restraint, e.g., welding between two anchored points.
Postweld heat treatment (PWHT) of welds, bends, and forgings shall be in accordance with Table
331.1.1 of B31.3, with the following modifications:
a. The maximum hardness of P-1, welds shall be 225 Brinell hardness number (HB).
b. Heat treatment shall be based on pipe wall thickness according to ASME B31.3 except
when required based on fluid such caustic, amine ,moist H2 service piping, etc.
The exemption of certain fillet welds from PWHT, noted in Paragraph 331.1.3(b) of ASME B31.3,
applies only if:
a. The welding procedure qualifications yielded hardnesses less than 225 HB.
COMPANY approval of bending and forming procedures, including preheat and postheat
treatment is required prior to use. Uniform heating of materials is required before forming and hot
bending.
Bends may only be made from seamless and electric fusion welded pipe materials (joint factor
shall equal 1.0). Bends of other designs (such as creased or corrugated) are not acceptable.
The pipe wall thickness at the thinnest point after bending and forming less corrosion allowance
shall not be less than the calculated thickness required for pressure and temperature. Pipe bends
and formed components shall be free from wrinkles and bulges after bending (or forming) and
heat treatment. Pipe bends and formed components with cracks shall be rejected.
Tolerances
a. The flanges mating to rotating equipment shall be no more than 1/16 in. from being parallel
to the equipment flange, measured across any diameter. Also, before bolt-up the axial
clearance between mating flanges shall equal the initial gasket thickness plus or minus
1/16 in.
COMPANY reserves the right to have disconnected any pump or compressor piping they have
reason to suspect may be "pulled up" on the machine flanges. If flange bolts cannot be reinstalled
by hand, Contractor shall be responsible for the necessary modification.
b. The lateral translation of flanges in any direction from the specified direction shall not
exceed 1/16 in.
c. For all pipe sizes, the tolerances on linear dimensions shall not exceed 1/8 in. Tolerances
shall not be cumulative.
d. Pipe that has not been postweld heat treated may be heated for minor corrections in fit.
Under no circumstances, however, may pipe materials be quenched to correct alignment.
Bolted Joints
a. All flanged joints shall be brought up flush so that the entire flange face bears uniformly on
the gasket. The bolts shall then be tightened to produce uniform bolt stress.
Full flat-faced gaskets shall be used. These joints shall be made up with extreme care, taking up
on bolts uniformly after fitting flanges into close parallel and lateral alignment.
c. All bolts shall extend completely through their nuts (335.2.3 of ASME B31.3) Bolt extension
shall be limited to 3 or fewer threads unless bolt tensioning equipment is to be used.
d. Thread lubricants for bolting shall not contain lead. Thread lubricants for austenitic bolting
shall not contain chlorides, sulfur or low melting point metallic constituents.
e. A flange cover shall be kept on all flanged connections to pumps, compressors and similar
equipment until the piping is ready to be connected.
Pipe Supports
b. Spring hangers (including the constant-support type) shall be checked for proper
adjustment of travel, and shall be correctly positioned for the cold condition at erection.
c. Factory-set hangers shall be located per support identification number, and travel position
shall be checked after installation.
Cleaning of Piping
a. Scale, dirt, welding electrodes, slag, and other foreign matter shall be removed from the
piping after erection. It is desirable that this also be done as erection progresses. Mainline
pipe shall be internally pre-cleaned and protected in accordance with the applicable project
specifications.
b. Unless otherwise specified in the Project Specifications, all piping shall be cleaned by
flushing with water at a minimum velocity of 5 ft/ sec. Measures shall be employed to
prevent the Introduction of foreign matter into pumps, compressors, instruments, and other
equipment.
Temporary strainers shall be used at pumps during the flushing operation, unless spools or valves
can be conveniently dropped out and suitable deflectors provided to prevent refuse from entering
the machines. Large diameter -piping that can be cleaned manually need not be flushed. Any
piping that cannot be adequately cleaned shall be dismantled for cleaning. Cleaning shall be
performed after hydrotesting.
c. Particular attention shall be given to the cleaning of compressor and pump inlet piping, as
well as fuel gas and diesel fuel supply piping.
In addition to certification that all COMPANY and ASME B31.3 quality control requirements have
been met, the examiner shall provide THE INSPECTOR with all of the certificates and records
listed in Paragraph 341.4.1(c) of ASME B31.3.
If any doubt exists in the mind of the owner's inspector as to the quality of any weld, he may
request examination of the weld by any method.
Welds between dissimilar materials shall be examined by the method used, and to the extent
required, for the material requiring the more stringent examination.
All forged items and pipe bends shall be cleaned of all scale and subjected to a careful visual
examination for cracks and surface laminations. The magnetic particle method or the dye
penetrant method of inspection shall be used following the visual examination if any doubt exists
as to the nature of a visible surface defect
.
Hardness measurements are required on ferritic materials when PWHT is required. For such
materials, hardness measurements shall be made on both the weld and the heat-affected zone to
the extent required by Paragraph 331.1.7 of ASME B31.3. Measurements should be made for
every 12 in. of weldment of each weld required for hardness examination.
ASME B31.3 acceptance criteria for welds shall apply, with the following modifications:
b. External weld reinforcement and internal weld protrusion shall be a maximum of 1/8 in. or
50 percent of the wall thickness, whichever is less. All internal weld protrusion shall be
removed at orifice flanges.
c. Cracks and lack of fusion shall be removed. After detection, complete removal shall be
verified by either magnetic particle or dye penetrant examination. When removing cracks
from a weld, the entire weld shall be removed if more than one-quarter of the weld's
circumference (cumulative) is involved.
Piping systems shall be hydrostatically pressure tested with potable water to the greatest extent
practicable at the Fabricator's yard before shipment. This test shall be performed regardless of
any shop hydrostatic pressure testing of piping spools. Hydrostatic testing shall not be performed
when there is an air temperature of 40° F or less, nor during periods of rain or fog. Piping with
less than l/2" wall thickness shall not be field pressure tested at metal temperatures below 5° C.
Piping 1/2" and thicker shall not be tested at metal temperatures below 60° F unless impact
tested materials were used, in which case the minimum metal temperature may be 5° C.
Should a leak develop in a weld during test, the defect shall be removed by chipping, grinding,
flame gouging, or arc-air gouging, and the area shall be rewelded. Either the magnetic particle or
the dye penetrant method shall be employed to determine the extent of the defect.
All repair welds shall be preheated and postheated as originally required, and the basic principles
of the same welding procedure as initially used shall be employed as far as applicable. After
repair, the weld shall be retested. The progressive inspection requirements of Paragraph 341.3.4
of ASME B31.3 apply as they do for defects discovered during inspection.
6 TECHNICAL REQUIREMENTS
1. All line classes used for Sour Service shall comply with NACE standard MR0175/15156
(latest edition) and all welded piping and components shall be made of HIC-resistant
carbon steel in accordance with NACE standard SP0472 (latest edition). This includes
classes 1CB3P1, 3CB3P1, 6CB3P1, 9CB3P1, 1CB4P1, 3CB4P1, A12, B12, D12 and
E12.
2. Potable Water service requires galvanized carbon steel or stainless steel piping.
3. All carbon steel piping and components used for Process lines shall be killed.
7 BRANCH CONNECTIONS
Branch connections of piping systems shall be in accordance with detailed piping line classes in
Attachment 1 "LINE CLASS INDEX".
Care should be exercised in the design of small branch connections to prevent mechanical
damage or breakage due to vibration or excessive external forces. Connections that may require
bracing include sample points, instruments, purges, thermal relief valves, corrosion probes, and
vent and drain connections (particularly where double blocks and bleeds are required). The
bracing method shall be subject to COMPANY approval. Care must be taken in the location of
small connections in piping subject to thermal movement.
Reinforcement for pipe-to-pipe branch connections shall be in accordance with ASME B31.3.
Fabricated branch connections other tan those shown in Figure 328.5.4E of ASME B31.3 shall
not be used for severe cyclic conditions (306.5.2 of ASME B31.3).
The use of ribs and gussets shall not be allowed for pressure strengthening of branch
connections. Use of ribs, gussets, clamps, and plates, to provide strength for external and thermal
loads is permissible with prior COMPANY approval.
Full-sized or reducing branches at angles other than 90 degree shall not be employed except
when required for flow and pressure drop considerations (e.g., flare lines).
Contoured insert branch fittings (e.g. Sweepolet, Vesselet, and Laterolet) which have been
qualified in accordance with 304.7 of ASME B31.3 may be used in place of tees. If used, the weld
attaching the fitting to run shall be examined as a circumferential butt-weld in accordance with
304.3.2 (a) of ASME B31.3.
Spacing between adjacent branch connections shall not be less than 1-1/2 times their average
diameter (304.3.3 (e) of ASME B31.3).
Piping line class index is shown in Appendix 1, also, detail information of each Piping Material
Specification is shown in Appendix 2.
PC OF CRUDE OIL PROCESSING PLANT OPERATIONS CENTER PETROMONAGAS (COPEM) - BASIC ENGINEERING - LINE
CLASS INDEX
Line Flange Design Conditions C.A. Basic Valve NDE
Fluid Service - Extention Remark
Class Rating PSIG F (inch) Material Body/Trim Requirements
Instrument Air
Carbon
Plant Air Per ASME Cast Iron / Note
12CS1U 125# FF -20 to 180 0.05 Steel 5% RT of BW
Utility Air B16.1 Bronze 1,3
(Galv.)
Potable Water
Crude Oil
Wet or Dry DCO
Recycle Oil
Slop Oil Killed
Per ASME
1CB2P Diluent 150# RF -20 to 450 0.10 Carbon CS / 316SS 5% RT of BW Note 2
B16.5
Fuel Gas Steel
Closed Drain
Disposal Water
Utility Water
Killed
100% RT of
Per ASME Carbon CS / 316SS
1CB3P1 Amine & Sour Gas 150# RF -20 to 800 0.20 BW, 100% MT
B16.5 Steel (NACE)
of SW
(NACE)
Killed
Per ASME
1CB4P1 Produced Water Condensate 150# RF -20 to 800 0.250 Carbon CS / 316SS 5% RT of BW, Note 4
B16.5
Steel
PC OF CRUDE OIL PROCESSING PLANT OPERATIONS CENTER PETROMONAGAS (COPEM) - BASIC ENGINEERING - LINE
CLASS INDEX
Line Flange Design Conditions C.A. Basic Valve NDE
Fluid Service - Extention Remark
Class Rating PSIG F (inch) Material Body/Trim Requirements
Per ASME Carbon CS / F6 &
1CS1F Fire Water (Above-Ground) 150# RF 5 to 200 0.12 5% RT of BW
B16.5 Steel HF
Per ASME Carbon
1CS1F1 Fire Water (Under-Ground) 150# RF 5 to 200 0.12 CS / Bronze 5% RT of BW
B16.5 Steel
Crude Oil
Wet or Dry DCO
Recycle Oil
Slop Oil
10 to 400 Killed
Diluent Per ASME
3CB2P 300# RF See note 0.10 Carbon CS / 316SS 5% RT of BW Note 2
Fuel Gas B16.5
5 / I18 Steel
Closed Drain
Disposal Water
Produced Water Condensate
Utility Water
Killed
10 to 400 100% RT of
Sour Hydrocarbons Per ASME Carbon CS / 316SS
3CB3P1 300# RF See note 0.125 BW, 100% MT
Water & Gas B16.5 Steel (NACE)
5 / I18 of SW
(NACE)
Killed
Sour Hydrocarbons 100% RT of
Per ASME Carbon CS / 316SS
3CB4P1 Water & Gas 300# RF -20 to 800 0.250 BW, 100% MT
B16.5 Steel (NACE)
HP Flare of SW
(NACE)
PC OF CRUDE OIL PROCESSING PLANT OPERATIONS CENTER PETROMONAGAS (COPEM) - BASIC ENGINEERING - LINE
CLASS INDEX
Line Flange Design Conditions C.A. Basic Valve NDE
Fluid Service - Extention Remark
Class Rating PSIG F (inch) Material Body/Trim Requirements
Crude Oil
Wet or Dry DCO
Recycle Oil
Slop Oil
45 to 800 Killed
Diluent Per ASME
6CB2P 600# RF see note 0.10 Carbon CS / 316SS 5% RT of BW Note 2
Fuel Gas B16.5
5 / I19 Steel
Closed Drain
Disposal Water
Produced Water Condensate
Utility Water
Killed
45 to 800 100% RT of
Sour Hydrocarbons Per ASME Carbon CS / 316SS
6CB3P1 600# RF see note 0.125 BW, 100% MT
Water & Gas B16.5 Steel (NACE)
5 / I19 of SW
(NACE)
Killed
45 to 400 100% RT of
Sour Hydrocarbons Per ASME Carbon CS / 316SS
9CB3P1 900# RF see note 0.125 BW, 100% MT
Water & Gas B16.5 Steel (NACE)
5 / I20 of SW
(NACE)
Corrosive Process
Per ASME -150 to SS / 316SS
A11 Chemicals 150# RF 0 316L 5% RT of BW
B16.5 400 & HF
Sulfinol
SS / 316SS 100% RT of
Corrosive Process Per ASME -150 to 316L
A12 150# RF 0 & HF BW, 100% PT
Sour B16.5 400 (NACE)
(NACE) of SW
PC OF CRUDE OIL PROCESSING PLANT OPERATIONS CENTER PETROMONAGAS (COPEM) - BASIC ENGINEERING - LINE
CLASS INDEX
Line Flange Design Conditions C.A. Basic Valve NDE
Fluid Service - Extention Remark
Class Rating PSIG F (inch) Material Body/Trim Requirements
SS / 316SS 100% RT of
Corrosive Process Per ASME -150 to 316L
B12 300# RF 0 & HF BW, 100% PT
Sour B16.5 400 (NACE)
(NACE) of SW
SS / 316SS 100% RT of
Corrosive Process Per ASME -150 to 316L
D12 600# RF 0 & HF BW, 100% PT
Sour B16.5 400 (NACE)
(NACE) of SW
SS / 316SS 100% RT of
Corrosive Process Per ASME -150 to 316L
E12 900# RTJ 0 & HF BW, 100% PT
Sour B16.5 400 (NACE)
(NACE) of SW
Note 1: Piping for Potable Water service require the use of galvanized carbon steel
Note 4: Piping sizes 20-24" wall thicknesses shall be confirmed as per Design Conditions
Note 5: Please see section 7 Notes, to find notes I18, I19 or I20
GAF 6, 16 3 24 GATE, 125#, FF, ASTM A126-B BODY, TRIM BRONZE, FP, SOLID WEDGE, BB
GLT 16 1/2 2 GLOBE, 200#, THRD, BRONZE BODY, TRIM BRONZE, UB, T-BODY
GLF 16 3 14 GLOBE, 125#, FF, ASTM A126-B BODY, TRIM BRONZE,BB, T-BODY
CHT 16 1/2 2 CHECK, H OR V, 200#, THRD, BRONZE BODY, TRIM BRONZE SWING TYPE,
THREADED COVER
CHF 16 1/2 2 CHECK, H OR V, PISTON TYPE, 200#, THRD, BRONZE BODY, TRIM BRONZE,
THREADED COVER
CHF 16 3 24 CHECK, H OR V, 125#, FF ASTM A126-B BODY, WAFER TYPE, BRONZE DISC
BAT 9, 16, S2, I11 1/2 2 BALL, 400#, THRD, BRONZE BODY, TRIM BRONZE, RP, FLOATING BALL
BAF 9, 16, S2, I11 3 10 BUTTERFLY, 125#, FF, ASTM A 126-B BODY, TRIM 316SS, WAFER TYPE
BAF 9, 16, I11 12 24 BUTTERFLY, 125#, FF, ASTM A 126-B BODY, TRIM 316SS, WAFER TYPE, BUNA-N
SEATS & STEM, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XS, TE, WELDED (ERW), ASTM A 53-B (GALV PER ATSM A153) ASME B 36.10
PIP 1, 9 3 24 PIPE, SCH STD, BE, WELDED (ERW), ASTM A 53-B ASME B 36.10
FITTINGS SOCKET WELD
PRT 2, 3 1/2 2 PLUG, ROUND HEAD, THRD, NPT, GALV CS, ASTM A105 (GALV PER ATSM A153) ASME B 16.11
90E 2 1/2 2 90° ELBOW, 300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM A197 (GALV ASME B 16.11
PER ATSM A153)
45E 2 1/2 2 45° ELBOW, 300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM A197 (GALV ASME B 16.11
PER ATSM A153)
CAP 2 1/2 2 CAP, 300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM A197 (GALV PER ASME B 16.11
ATSM A153)
RTE 2 3/4 2 REDUCER TEE, 300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM A197 ASME B 16.11
(GALV PER ATSM A153) ( SMALL SIZE= 1/2"-1-1/2")
TEE 2 1/2 2 TEE, 300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM A197 (GALV PER ASME B 16.11
ATSM A153)
UNI 2 1/2 2 UNION, 300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM A197 (GALV PER MSS SP-83
ATSM A153) , INTEGRAL SEAT
CPT 2, 3 1/2 2 COUPLING, 300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM A197 (GALV ASME B 16.11
PER ATSM A153)
CRD 2,3 3/4 2 REDUCER COUPLING,300#, THRD, NPT, MALLEABLE IRON, GALV CS, ASTM ASME B 16.11
A197 (GALV PER ATSM A153)
4 4 SWAGE ECCENTRIC, BW X THRD, CS, SCH XS, SMLS, ASTM A234-WPS, LEB- MSS SP-95
SET ( SMALL SIZE= 1/2"-1-1/2")
SET 3/4 2 SWAGE ECCENTRIC, THRD, NPT, SCH XS, SMLS, GALV CS, ASTM A234-WPB MSS SP-95
(GALV PER ATSM A153) TE ( SMALL SIZE= 1/2"-1-1/2")
4 4 SWAGE CONCENTRIC, BW X THRD, CS, SCH XS, SMLS, ASTM A234-WPS, LEB- MSS SP-95
SET ( SMALL SIZE= 1/2"-1-1/2")
SCT 3/4 2 SWAGE CONCENTRIC, THRD, NPT, SCH XS, SMLS, GALV CS, ASTM A234-WPB MSS SP-95
(GALV PER ATSM A153) TE ( SMALL SIZE= 1/2"-1-1/2")
TOL 2, I3 1/2 2 THREADOLET, 3000#, BW x THRD, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
FITTINGS BUTT WELD
C7E 2, I2 4 24 REDUCER CONCENTRIC, SCH STD, BW, SMLS, ASTM A234-WPB ( SMALL SIZE= ASME B 16.9
3" - 20")
E7E 2, I2 4 24 REDUCER ECCENTRIC, SCH STD, BW, SMLS, ASTM A234-WPB ( SMALL SIZE= ASME B 16.9
45E 2 3 24 45° 20")
3" - ELBOW, SCH STD, BW, ASTM A234-WPB-W ASME B 16.9
90E 2 3 24 90° ELBOW, LR, SCH STD, BW, ASTM A234-WPB-W ASME B 16.9
CAP 2 3 24 CAP, SCH STD, BW, SMLS, BW, ASTM A234-WPB-S ASME B 16.9
TEE 2 3 24 TEE, SCH STD, BW, SMLS, BW, ASTM A234-WPB-W ASME B 16.9
FLANGES
CR1 2 1/2 2 BLIND FLANGE, 150#, FF, ASTM A105 (GALV PER ATSM A153) , STANDARD ASME B 16.5
FINISH
TF1 2 1/2 2 THREADED FLANGE, 150#, FF, ASTM A105 (GALV PER ATSM A153) , STANDARD ASME B 16.5
FINISH
TF1 2 2 4 THREADED FLANGE, 150#, FF, ASTM A105, STANDARD FINISH ASME B 16.5
TR3 2 1/2 2 THREADED FLANGE, 300#, RF, ASTM A105 (GALV PER ATSM A153) , STANDARD ASME B 16.5
FINISH
WF1 2 3 24 WELDING NECK FLANGE, 150#, FF, SCH STD, CS, ASTM A105, STANDARD ASME B 16.5
FINISH
ORI 2 2 !/2" 24 WELDING NECK ORIFICE SET, 300#, RF, SCH STD, KILLED CS, ASTM A105, W/2 ASME B 16.36
THR TAPS, STANDARD FINISH
36 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GASKETS
GR1 1/2 24 SPW, 304SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING, ASME B 16,5/API 601
GR3 1/2 24 SPW, 304SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING, ASME B 16,5/API 601
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
37 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 B T
18 B B T
16 B B P T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" O O O O O O O O O O O T
1½" O O O O O O O O O O O TR T
1" O O O O O O O O O O O TR TR T
3/4" O O O O O O O O O O O TR TR TR T
½" O O O O O O O O O O O TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
38 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 16 3 8 GATE, 150# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 10 24 GATE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB, GO
GAF 16 30 42 GATE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB, GO
(ASME B16.47/B)
GLS 16 1/2 2 GLOBE, 800#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 8 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 10 12 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING TYPE,
BC
CHF 16 30 42 CHECK, H OR V, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM
316SS, SWING TYPE, BC
CHW 16, I6 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER TYPE,
DUAL PLATE, NON-SLAM
CHW 16, I6 30 42 CHECK, H OR V, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM 316SS
WAFER TYPE, DUAL PLATE, NON-SLAM
BAS 9, 16, S2, I11 1/2 2 BALL, 300#, MPE, ASTM A105 BODY, TRIM 316SS, RFTE, RP, FLOATING BALL
BAV 9, 16, S2, I11 1/2 2 BALL, 300#, MPE X THRD, ASTM A105 BODY, TRIM 316SS, RFTE, RP, FLOATING
BALL
BA4 9, 16, I11 1/2 2 BALL, 300#, SW, ASTM A105 BODY, TRIM 316SS, RFTE, RP, FLOATING BALL
BA1 8, 9, 16, I11 2 6 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
FLOATING BALL
BA1 8, 9, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
TRUNNION BALL, GO
BA1 8, 9, 16, I11 30 42 BALL, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM 316SS, RTFE
SEATS, FP, TRUNNION BALL, GO
BAF 9, 16, I11 2 6 BALL, 150#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING
BALL
BAF 09, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP,
TRUNNION BALL, GO
BAF 09, 16, I11 30 42 BALL, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM 316SS, RTFE
SEATS, RP, TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 24 PIPE, SCH STD, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 30 42 PIPE, WALL THK CALC, BE, WLD (SAW), KILLED CS, ASTM API 5L-B PSL 2 ASME B 36.10
TEE 2 1/2 2 TEE, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 3000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
UNI 2 1/2 2 UNION, 3000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPL 2, 3 1/2 2 COUPLING, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
SEP 3/4 2 SWAGE ECCENTRIC, SCH XS, PE, SMLS, KILLED CS, ASTM A234-WPB ( SMALL MSS SP-95
SIZE= 1/2"-1-1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SE5 3 3/4 2 SWAGE ECCENTRIC, SCH XS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SC5 3 3/4 2 SWAGE CONCENTRIC, SCH XS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SOL 2 1/2 2 SOCKOLET, 3000#, BW x SW, KILLED CS, ASTM A105 ( HEADER 3" - 24") MSS SP-97
TOL 2, I3 1/2 2 THREADOLET, 3000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
39 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
45E 2 30 42 45° ELBOW, LR, WALL THK CALC, BW, WLD, KILLED CS, ASTM A234-WPB-W, W ASME B 16.9
/100%RX .
90E 2 30 42 90° ELBOW, LR, WALL THK CALC, BW, WLD, KILLED CS, ASTM A234-WPB-W, W ASME B 16.9
/100%RX .
CAP 2 30 42 CAP, WALL THK CALC, BW, WLD, KILLED CS, ASTM A234-WPB-W ASME B 16.9
WOL 2, 5 3 24 WELDOLET, SCH STD, BW, CS, ASTM A105, W /100%RX . (HEADER 6"- 42") MSS SP-97
FLANGES
CR1 2 1/2 2 SOCKET WELD FLANGE, 150#, RF, SCH XS, KILLED CS, ASTM A105, STANDARD ASME B 16.5
FINISH
BR1 2 1/2 24 BLIND FLANGE, 150#, RF, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
WR1 2 3 24 WELDING NECK FLANGE, 150#, RF, SCH STD, KILLED CS, ASTM A105, ASME B 16.5
STANDARD FINISH
WR1 2 30 42 WELDING NECK FLANGE, 150#, RF, WALL THK CALC, KILLED CS, ASTM A105, ASME B 16.47/B
STANDARD FINISH
ORI 2 3 24 WELDING NECK ORIFICE SET, 300#, RF, SCH STD, KILLED CS, ASTM A105, W/2 ASME B 16.36
THR TAPS, STANDARD FINISH
NIPPLES
NPE 4 1/2 2 BRANCH NIPPLE, SCH 160, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NPE 4 1/2 2 BRANCH NIPPLE, SCH 160, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH 160, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH 160, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 42 BASKET TEMPORARY PUMP SUCTION STRAINER, 150#, RF, BASKET 316SS, 40
MESH
YST 2 24 Y-STRAINER, 150#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH PER
ASME B16.48
YST 26 42 Y-STRAINER, 150#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH PER
ASME B16.47/B
SPE 1/2 12 FIGURE 8, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME ASME B16.48
SPA 14 24 B16.48
SPACER, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
SPA 26 42 SPACER, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.47/B
BLA 14 24 BLIND, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B16.48 ASME B16.48
BLA 26 42 BLIND, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.47/B
GASKETS
GR1 1/2 24 SPW, 304SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING ASME B 16.5/ASME B 16.20
GR1 26 42 SPW, 304SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING ASME B 16.47/B / ASME B 16.20
GR1 1/2 24 SPW, 304SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING ASME B 16.5/ASME B 16.20
GR3 26 42 SPW, 304SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, ASME B FLEX CG
16.47/B / ASME B 16.20
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
40 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
41 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
42 T
36 P T
30 P P T
24 P P P T
20 P P P P T
18 P P P B B T
16 P P P B B B T
BRANCH SIZE
14 P P P B B B B T
12 P P P B B B B B T
10" W W W B B B B B B T
8" W W W B B B B B B B T
6" W W W B B B B B B B B T
4" W W W B B B B B B B B B T
3" W W W B B B B B B B B B B T
2" S S S S S S S S S S S S S S T
1½" S S S S S S S S S S S S S S TR T
1" S S S S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S S S S TR TR TR TR T
42 36 30 24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
42 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 15, 16 1/2 2 GATE, 150# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 3 8 GATE, 150# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 10 24 GATE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB,
GO
GLS 16 1/2 2 GLOBE, 800#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 8 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 10 12 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING TYPE,
BC
CHW 16, I6 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER TYPE,
DUAL PLATE, NON-SLAM
BAS 9, 16, S2, 1/2 2 BALL, 300#, MPE, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
I11
BAV 9, 16, S2, 1/2 2 BALL, 300#, MPE X THRD, ASTM A105 BODY, TRIM 316SS, RTFE, RP,
I11 FLOATING BALL
BA4 9, 16, I11 1/2 2 BALL, 300#, SW, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BA1 8, 9, 16, I11 2 6 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
FLOATING BALL
BA1 8, 9, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
TRUNNION BALL, GO
BAF 9, 16, I11 3 6 BALL, 150#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING
BALL
BAF 09, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP,
TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 6 PIPE, SCH XS, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 8 16 PIPE, SCH STD, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 24 24 PIPE, SCH XS, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
TEE 2 1/2 2 TEE, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 6000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
UNI 2 1/2 2 UNION, 6000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPS 2, 3 1/2 2 COUPLING, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
SEP 3/4 2 SWAGE ECCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SE5 3 3/4 2 SWAGE ECCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB MSS SP-95
( SMALL SIZE= 1/2"-1-1/2")
SC5 3 3/4 2 SWAGE CONCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234- MSS SP-95
WPB ( SMALL SIZE= 1/2"-1-1/2")
SOL 2 1/2 2 SOCKOLET, 6000#, BW x SW, KILLED CS, ASTM A105 (HEADER 3"- 24") MSS SP-97
TOL 2, I3 1/2 2 THREADOLET, 6000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
43 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
NPE 4 1/2 2 BRANCH NIPPLE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 24 BASKET TEMPORARY PUMP SUCTION STRAINER, 150#, RF, BASKET 316SS,
40 MESH
YST 2 24 Y-STRAINER, 150#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
SPE 1/2 12 FIGURE 8, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
SPA 14 24 SPACER, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
BLA 14 24 BLIND, 150#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
44 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
45 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
46 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 15, 16 1/2 2 GATE, 150# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 3 8 GATE, 150# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 10 24 GATE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB,
GO
GAF 16 30 42 GATE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB,
GO (ASME B16.47/B)
GLS 16 1/2 2 GLOBE, 800#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 8 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 10 12 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING TYPE,
BC
CHF 16 30 42 CHECK, H OR V, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM
316SS, SWING TYPE, BC
CHW 16, I6 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER TYPE,
DUAL PLATE, NON-SLAM
CHW 16, I6 30 42 CHECK, H OR V, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM
316SS WAFER TYPE, DUAL PLATE, NON-SLAM
BAS 9, 16, S2, 1/2 2 BALL, 300#, MPE, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
I11
BAV 9, 16, S2, 1/2 2 BALL, 300#, MPE X THRD, ASTM A105 BODY, TRIM 316SS, RTFE, RP,
I11 FLOATING BALL
BA4 9, 16, I11 1/2 2 BALL, 300#, SW, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BA1 8, 9, 16, I11 2 6 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
FLOATING BALL
BA1 8, 9, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
TRUNNION BALL, GO
BA1 8, 9, 16, I11 30 42 BALL, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM 316SS, RTFE
SEATS, FP, TRUNNION BALL, GO
BAF 9, 16, I11 3 6 BALL, 150#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING
BALL
BAF 09, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP,
TRUNNION BALL, GO
BAF 09, 16, I11 30 42 BALL, 150#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM 316SS, RTFE
SEATS, RP, TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 3 PIPE, SCH 160, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 4 24 PIPE, SCH XS, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 30 42 PIPE, CALC THICK, BE, WLD (DSAW), KILLED CS, ASTM API 5L-B PSL 2 ASME B 36.10
TEE 2 1/2 2 TEE, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 9000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
UNI 2 1/2 2 UNION, 9000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPS 2, 3 1/2 2 COUPLING, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
1 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
2 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
NPE 4 1/2 2 BRANCH NIPPLE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 42 BASKET TEMPORARY PUMP SUCTION STRAINER, 150#, RF, BASKET 316SS,
40 MESH
YST 2 1/2 42 Y-STRAINER, 150#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
SPE 1/2 12 FIGURE 8, 150#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
SPA 14 24 SPACER, 150#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
SPA 26 42 SPACER, 150#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.47B
BLA 14 24 BLIND, 150#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
BLA 26 42 BLIND, 150#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.47B
GASKETS
GR1 1/2 42 SPW, 304SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, FLEX CG
316LSS INNER RING, ASME B 16,5/API 601
GR3 1/2 42 SPW, 304SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, FLEX CG
316LSS INNER RING, ASME B 16,5/API 601
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
3 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
42 T
36 P T
30 P P T
24 P P P T
20 P P P P T
18 P P P B B T
16 P P P B B B T
BRANCH SIZE
14 P P P B B B B T
12 P P P B B B B B T
10" W W W B B B B B B T
8" W W W B B B B B B B T
6" W W W B B B B B B B B T
4" W W W B B B B B B B B B T
3" W W W B B B B B B B B B B T
2" S S S S S S S S S S S S S S T
1½" S S S S S S S S S S S S S S TR T
1" S S S S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S S S S TR TR TR TR T
42 36 30 24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
50 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 15, 16 1/2 2 GATE, 150# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 3 8 GATE, 150# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 10 24 GATE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB,
GO
GLS 16 1/2 2 GLOBE, 800#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 8 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 10 12 GLOBE, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING TYPE,
BC
CHW 16, I6 3 24 CHECK, H OR V, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER TYPE,
DUAL PLATE, NON-SLAM
BAS 9, 16, S2, I11 1/2 2 BALL, 300#, MPE, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BAV 9, 16, S2, I11 1/2 2 BALL, 300#, MPE X THRD, ASTM A105 BODY, TRIM 316SS, RTFE, RP,
FLOATING BALL
BA4 9, 16, I11 1/2 2 BALL, 300#, SW, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BA1 8, 9, 16, I11 3 6 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
FLOATING BALL
BA1 8, 9, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
TRUNNION BALL, GO
BAF 9, 16, I11 3 6 BALL, 150#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING
BALL
BAF 09, 16, I11 8 24 BALL, 150#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP,
TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XS, TE, SMLS, ASTM A106-B (GALV PER ATSM A153) ASME B 36.10
PIP 1, 9 2 1/2 24 PIPE, SCH STD, BE, WELDED (ERW), ASTM A 53-B ASME B 36.10
PIP 1, 9 6 6 PIPE, SCH STD, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
SEP 3/4 2 SWAGE ECCENTRIC, SCH XS, SMLS,THRD, NPT, ASTM A234-WPB (GALV PER MSS SP-95
ATSM A153) ( SMALL SIZE= 1/2"-1-1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XS, THRD, NPT, ASTM A234-WPB (GALV PER MSS SP-95
ATSM A153) ( SMALL SIZE= 1/2"-1-1/2")
TOL 2, I3 1/2 2 THREADOLET, 3000#, BW x THRD, ASTM A105 ( HEADER 2"- 24" ) MSS SP-97
FITTINGS BUTT WELD
C7E 2, I2 3 24 REDUCER CONCENTRIC, SCH STD, BW, SMLS, ASTM A234-WPB ( SMALL ASME B 16.9
SIZE= 2 1/2" - 20")
E7E 2, I2 3 24 REDUCER ECCENTRIC, SCH STD, BW, SMLS, ASTM A234-WPB ( SMALL SIZE= ASME B 16.9
2 1/2" - 20")
45E 2 2 1/2 24 45° ELBOW, LR, SCH STD, BW, ASTM A234-WPB-W ASME B 16.9
90E 2 2 1/2 24 90° ELBOW, LR, SCH STD, BW, ASTM A234-WPB-W ASME B 16.9
CAP 2 2 1/2 24 CAP, SCH STD, BW, SMLS, BW, ASTM A234-WPB ASME B 16.9
TEE 2 2 1/2 24 TEE, SCH STD, BW, SMLS, BW, ASTM A234-WPB ASME B 16.9
CRE 2, I2 6 6 REDUCER CONCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB ( ASME B 16.9
SMALL SIZE= 3" - 4")
ERE 2, I2 6 6 REDUCER ECCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB ( ASME B 16.9
SMALL SIZE= 3" - 4")
FLANGES
CF1 2 1/2 2 BLIND FLANGE, 150#, FF, ASTM A105 (GALV PER ATSM A153) , STANDARD ASME B 16.5
FINISH
CR1 2 1/2 2 BLIND FLANGE, 150#, RF, ASTM A105 (GALV PER ATSM A153) , STANDARD ASME B 16.5
FINISH
WF1 2 2 1/2 24 BLIND FLANGE, 150#, FF, ASTM A105, STANDARD FINISH ASME B 16.5
WR1 2 2 1/2 24 BLIND FLANGE, 150#, RF, ASTM A105, STANDARD FINISH ASME B 16.5
TR1 2 1/2 2 THREADED FLANGE, 150#, RF, ASTM A105 (GALV PER ATSM A153) , ASME B 16.5
STANDARD FINISH
TF1 2 1/2 2 THREADED FLANGE, 150#, FF, ASTM A105 (GALV PER ATSM A153) , ASME B 16.5
STANDARD FINISH
TF1 2 2 4 THREADED FLANGE, 150#, FF, ASTM A105, STANDARD FINISH ASME B 16.5
TR3 2 1/2 2 THREADED FLANGE, 300#, RF, ASTM A105 (GALV PER ATSM A153) , ASME B 16.36
STANDARD FINISH
OMI 2 2 1/2 24 THRD Orifice Set,W/JS Killed, CL300, RF, SCH XS, ASTM A105(Galv), 2 NPT 1/2" ASME B 16.36
Tap,B16.36/B16.5
ORI 2 2 1/2 24 WELDING NECK ORIFICE SET, 300#, RF, SCH STD, KILLED CS, ASTM A105, ASME B 16.36
W/2 THR TAPS, STANDARD FINISH
51 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
BST 2 24 BASKET TEMPORARY PUMP SUCTION STRAINER, 150#, RF, BASKET 316SS,
40 MESH
YST 2 24 Y-STRAINER, 150#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
SPE 1/2 12 FIGURE 8, 150#, RF, ASTM A516-70 (GALV PER ATSM A153), STANDARD ASME B16.48
FINISH, DESIGN PER ASME B16.48
SPA 14 24 SPACER, 150#, RF, ASTM A516-70 (GALV PER ATSM A153), STANDARD ASME B16.48
FINISH, DESIGN PER ASME B16.48
BLA 14 24 BLIND, 150#, RF, ASTM A516-70 (GALV PER ATSM A153), STANDARD FINISH, ASME B16.48
DESIGN PER ASME B16.48
GASKETS
GR1 1/2 24 SPW, 304SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, FLEX CG
316LSS INNER RING, ASME B 16,5/API 601
GR3 1/2 24 SPW, 304SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, FLEX CG
316LSS INNER RING, ASME B 16,5/API 601
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
52 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 B T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" O O O O O O O O O O O T
1½" O O O O O O O O O O O TR T
1" O O O O O O O O O O O TR TR T
3/4" O O O O O O O O O O O TR TR TR T
½" O O O O O O O O O O O TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
53 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
54 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
55 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 B T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" O O O O O O O O O O O T
1½" O O O O O O O O O O O TR T
1" O O O O O O O O O O O TR TR T
3/4" O O O O O O O O O O O TR TR TR T
½" O O O O O O O O O O O TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
56 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
BA4 9, 16, I11 1/2 2 BALL, 300#, SW, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BA1 8, 9, 16, I11 3 6 BALL, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP, FLOATING BALL
BA1 8, 9, 16, I11 8 24 BALL, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP, TRUNNION BALL,
GO
BA2 9, 16 30 30 BALL, 300#, RF (ASME B16.47/B), ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP,
TRUNNION BALL, LS, GO
BAF 9, 16, I11 3 6 BALL, 300#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BAF 09, 16, I11 8 24 BALL, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP, TRUNNION BALL,
GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 24 PIPE, SCH 40, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 30 30 PIPE, WALL THK CALC, BE, WLD (DSAW), KILLED CS, ASTM API 5L-B PSL 2 ASME B 36.10
FITTINGS SOCKET WELD
PRT 2, 3 1/2 2 PLUG, ROUND HEAD, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
90E 2 1/2 2 90° ELBOW, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
45E 2 1/2 2 45° ELBOW, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAP 2 1/2 2 CAP, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAT 2, 3 1/2 2 CAP, 3000#, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
TEE 2 1/2 2 TEE, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 3000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
RTE 2 3/4 2 REDUCER TEE, 3000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1-1/2") ASME B 16.11
UNI 2 1/2 2 UNION, 3000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPS 2, 3 1/2 2 COUPLING, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
SEP 3/4 2 SWAGE ECCENTRIC, SCH XS, PE, SMLS, KILLED CS, ASTM A234-WPB ( SMALL SIZE= MSS SP-95
1/2"-1-1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XS, PE, SMLS, KILLED CS, ASTM A234-WPB ( SMALL SIZE= MSS SP-95
1/2"-1-1/2")
SE5 3 3/4 2 SWAGE ECCENTRIC, SCH XS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( SMALL MSS SP-95
SIZE= 1/2"-1-1/2")
SC5 3 3/4 2 SWAGE CONCENTRIC, SCH XS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( SMALL MSS SP-95
SIZE= 1/2"-1-1/2")
RTE 2 3/4 2 REDUCER TEE, 3000#, SW, KILLED CS, ASTM A105 ASME B 16.11
SO6 2 1/2 2 SOCKOLET, 3000#, BW x SW, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
TO6 2, I3 1/2 2 THREADOLET, 3000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
57 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
CRE 2 4 6 REDUCER CONCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL ASME B 16.9
SIZE= 3"-4")
ERE 2 4 6 REDUCER ECCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL ASME B 16.9
SIZE= 3"-4")
C5E 2, I2 8 14 REDUCER CONCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 4"- 6")
E5E 2, I2 8 14 REDUCER ECCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 4"-6")
CRE 2 10 14 REDUCER CONCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 8"- 10")
ERE 2 10 14 REDUCER ECCENTRIC, SCH 40 BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 8"-10")
CRE 2, I2 16 20 REDUCER CONCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 10"- 14")
ERE 2, I2 16 20 REDUCER ECCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 10"-14")
CRE 2 18 20 REDUCER CONCENTRIC, SCH 40 BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 16"- 18")
ERE 2 18 20 REDUCER ECCENTRIC, SCH 40 BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 16"-18")
CRE 2 24 24 REDUCER CONCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 18"- 20")
ERE 2 24 24 REDUCER ECCENTRIC, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 18"-20")
CRE 2, I1,I18 30 30 REDUCER CONCENTRIC, WALL THK CALC, BW, KILLED CS, ASTM A234-WPB- W, ASME B 16.9
W/100%RX ( SMALL SIZE= 20"- 24")
ERE 2, I1,I18 30 30 REDUCER ECCENTRIC, WALL THK CALC, BW, KILLED CS, ASTM A234-WPB-W, ASME B 16.9
W/100%RX.( SMALL SIZE= 20"-24")
TEE 2 8 24 TEE, SCH 40 BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
TEE 2, I1,I18 30 30 TEE,WALL THK CALC, BW, KILLED CS, ASTM A234-WPB-W, W /100%RX . ASME B 16.9
RTE 2 10 14 REDUCER TEE, SCH 40 BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 8"-12") ASME B 16.9
RTE 2, I2 8 12 REDUCER TEE, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 4"-12") ASME B 16.9
RTE 2, I2 16 20 REDUCER TEE, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 10"- ASME B 16.9
14")
RTE 2 18 20 REDUCER TEE, SCH 40 , BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 16"- ASME B 16.9
18")
RTE 2 24 24 REDUCER TEE, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 16"- ASME B 16.9
20")
45E 2 8 24 45° ELBOW, LR, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
45E 2, I1,I18 30 30 45° ELBOW, WALL THK CALC, BW, WLD, KILLED CS, ASTM A234-WPB-W, W /100%RX . ASME B 16.9
90E 2 8 24 90° ELBOW, LR, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
90E 2 30 30 90° ELBOW, LR, WALL THK CALC, BW, KILLED CS, ASTM A234-WPB-W, W /100%RX . ASME B 16.9
CAP 2 8 24 CAP, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
CAP 2, I1,I18 30 30 CAP, WALL THK CALC, BW, KILLED CS, ASTM A234-WPB-S ASME B 16.9
WOL 2, 5 3 6 WELDOLET, SCH 40, BW, CS, ASTM A105 (HEADER 16"- 24") MSS SP-97
FLANGES
CR3 2 1/2 2 SOCKET WELD FLANGE, 300#, RF, SCH XS, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
BR3 2 1/2 24 BLIND FLANGE, 300#, RF, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
WR3 2 3 24 WELDING NECK FLANGE, 300#, RF, SCH 40, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
WR3 2 30 30 WELDING NECK FLANGE, 300#, RF, WALL THK CALC, KILLED CS, ASTM A105, ASME B
STANDARD FINISH 16.47/B
ORI 2 3 24 WELDING NECK ORIFICE SET, 300#, RF, SCH 40, KILLED CS, ASTM A105, W/2 SOCW ASME B 16.36
TAPS, STANDARD FINISH
NIPPLES
NPE 4 1/2 2 BRANCH NIPPLE, SCH XS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NPE 4 1/2 2 BRANCH NIPPLE, SCH XS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 30 BASKET TEMPORARY PUMP SUCTION STRAINER, 300#, RF, BASKET 316SS, 40 MESH
YST 2 1/2 24 Y-STRAINER, 300#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
TST 30 30 T-STRAINER, 300#, RF, CS ASTM A234-WPB TEE, WELDING FLANGES ASTM A105, MULLER 42T-B
SCREEN 316SS, 4 MESH PER ASME B16.47/B
SPE 1/2 12 FIGURE 8, 300#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B16.48 ASME B16.48
SPA 14 24 SPACER, 300#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B16.48 ASME B16.48
SPA 30 30 SPACER, 300#, RF, CS, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B16.47/B ASME
B16.47/B
BLA 14 24 BLIND, 300#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B16.48 ASME B16.48
BLA 30 30 BLIND, 300#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B16.47/B ASME
B16.47/B
GASKETS
IK3 1/2 24 INSULATION KIT: 300# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL, MYLAR
SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK3 1/2 24 INSULATION KIT: 300# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL, MYLAR
SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
GR3 1/2 24 SPW, 304SS, CENTERING RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, INNER FLEX CG
RING FOR 18 & LARGER, ASME B 16.20
GR3 26 30 SPW, 304/316SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, ASME B FLEX CG
16.47/B
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
58 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
30 T
24 P T
20 P P T
18 W B B T
16 W B B B T
14 W B B B B T
12 W B B B B B T
BRANCH SIZE
10" W B B B B B B T
8" W B B B B B B B T
6" B B B B B B B B B T
4" B B B B B B B B B B T
3" B B B B B B B B B B B T
2" S S S S S S S S S S S S T
1½" S S S S S S S S S S S S TR T
1" S S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S S TR TR TR TR T
30 24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
T : STRAIGHT TEE
B : BRANCH WELD
S : SOCKOLET
W : WELDOLET
P : BRANCH WELD W/PAD
59 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
BAF 9, 16, I11 3 6 BALL, 300#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BAF 09, 16, I11 8 24 BALL, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP, TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 6 PIPE, SCH XS, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 8 14 PIPE, SCH STD, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 16 20 PIPE, SCH XS, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 24 24 PIPE, SCH 40, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
FITTINGS SOCKET WELD
PRT 2, 3 1/2 2 PLUG, ROUND HEAD, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
90E 2 1/2 2 90° ELBOW, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
45E 2 1/2 2 45° ELBOW, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAP 2 1/2 2 CAP, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAT 2, 3 1/2 2 CAP, 9000#, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
TEE 2 1/2 2 TEE, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 9000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
RTE 2 3/4 2 REDUCER TEE, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1-1/2") ASME B 16.11
UNI 2 1/2 2 UNION, 9000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPL 2, 3 1/2 2 COUPLING, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
SEP 3/4 2 SWAGE ECCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( SMALL SIZE= 1/2"-1- MSS SP-95
1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( SMALL SIZE= 1/2"-1- MSS SP-95
1/2")
SE5 3 3/4 2 SWAGE ECCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( SMALL SIZE= MSS SP-95
1/2"-1-1/2")
SC5 3 3/4 2 SWAGE CONCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( SMALL SIZE= MSS SP-95
1/2"-1-1/2")
RTE 2 3/4 2 REDUCER TEE, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1-1/2") ASME B 16.11
SOL 2 1/2 2 SOCKOLET, 9000#, BW x SW, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
TO6 2, I3 1/2 2 THREADOLET, 9000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
60 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
C5E 2, I2 8 14 REDUCER CONCENTRIC, SCH STD X SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( ASME B 16.9
SMALL SIZE= 4"- 6")
E5E 2, I2 8 14 REDUCER ECCENTRIC, SCH STD X SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 4"-6")
CRE 2 10 14 REDUCER CONCENTRIC, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL SIZE= 8"- ASME B 16.9
10")
ERE 2 10 14 REDUCER ECCENTRIC, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL SIZE= 8"- ASME B 16.9
10")
CRE 2, I2 16 20 REDUCER CONCENTRIC, SCH XS X STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 10"- 14")
ERE 2, I2 16 20 REDUCER ECCENTRIC, SCH XS X STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 10"-14")
CRE 2 18 20 REDUCER CONCENTRIC, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL SIZE= ASME B 16.9
16"- 18")
ERE 2 18 20 REDUCER ECCENTRIC, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL SIZE= 16"- ASME B 16.9
18")
CRE 2 24 24 REDUCER CONCENTRIC, SCH 40 X SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 18"- 20")
ERE 2 24 24 REDUCER ECCENTRIC, SCH 40 X SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S.( SMALL ASME B 16.9
SIZE= 18"-20")
TEE 2 8 14 TEE, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
TEE 2 16 20 TEE, SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
TEE 2 24 24 TEE, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
RTE 2 10 14 REDUCER TEE, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 8"-12") ASME B 16.9
RTE 2, I2 8 12 REDUCER TEE, SCH STD X SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= ASME B 16.9
4"-12")
RTE 2, I2 16 20 REDUCER TEE, SCH XS X STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 10"- ASME B 16.9
14")
RTE 2 18 20 REDUCER TEE, SCH XS , BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= 16"-18") ASME B 16.9
RTE 2 24 24 REDUCER TEE, SCH 40 X SCH XS , BW, SMLS, KILLED CS, ASTM A234-WPB-S ( SMALL SIZE= ASME B 16.9
16"-20")
45E 2 8 14 45° ELBOW, LR, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
90E 2 8 14 90° ELBOW, LR, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
45E 2 16 20 45° ELBOW, LR, SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
90E 2 16 20 90° ELBOW, LR, SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
45E 2 24 24 45° ELBOW, LR, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
90E 2 24 24 90° ELBOW, LR, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
CAP 2 8 14 CAP, SCH STD, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
CAP 2 16 20 CAP, SCH XS, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
CAP 2 24 24 CAP, SCH 40, BW, SMLS, KILLED CS, ASTM A234-WPB-S ASME B 16.9
WOL 2, 5 3 6 WELDOLET, SCH XS, BW, CS, ASTM A105 (HEADER 16"- 24") MSS SP-97
FLANGES
CR3 2 1/2 2 SOCKET WELD FLANGE, 300#, RF, SCH XXS, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
BR3 2 1/2 24 BLIND FLANGE, 300#, RF, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
WR3 2 3 6 WELDING NECK FLANGE, 300#, RF, SCH XS, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
WR3 2 8 14 WELDING NECK FLANGE, 300#, RF, SCH STD, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
WR3 2 16 20 WELDING NECK FLANGE, 300#, RF, SCH XS, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
WR3 2 24 24 WELDING NECK FLANGE, 300#, RF, SCH 40, KILLED CS, ASTM A105, STANDARD FINISH ASME B 16.5
ORI 2 3 6 WELDING NECK ORIFICE SET, 300#, RF, SCH XS, KILLED CS, ASTM A105, W/2 SOCW TAPS, ASME B 16.36
STANDARD FINISH
ORI 2 8 14 WELDING NECK ORIFICE SET, 300#, RF, SCH STD, KILLED CS, ASTM A105, W/2 SOCW TAPS, ASME B 16.36
STANDARD FINISH
ORI 2 16 20 WELDING NECK ORIFICE SET, 300#, RF, SCH XS, KILLED CS, ASTM A105, W/2 SOCW TAPS, ASME B 16.36
STANDARD FINISH
ORI 2 24 24 WELDING NECK ORIFICE SET, 300#, RF, SCH 40, KILLED CS, ASTM A105, W/2 SOCW TAPS, ASME B 16.36
STANDARD FINISH
NIPPLES
NPE 4 1/2 2 BRANCH NIPPLE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NPE 4 1/2 2 BRANCH NIPPLE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
61 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
62 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
63 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 15, 16 1/2 2 GATE, 300# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 3 8 GATE, 300# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 10 16 GATE, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB,
GO
GLS 16 1/2 2 GLOBE, 800#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 8 GLOBE, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 10 12 GLOBE, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 16 CHECK, H OR V, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING
TYPE, BC
CHW 16, I6 3 16 CHECK, H OR V, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER
TYPE, DUAL PLATE, NON-SLAM
BAS 9, 16, S2, 1/2 2 BALL, 300#, MPE, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
I11
BAV 9, 16, S2, 1/2 2 BALL, 300#, MPE X THRD, ASTM A105 BODY, TRIM 316SS, RTFE, RP,
I11 FLOATING BALL
BA4 9, 16, I11 1/2 2 BALL, 300#, SW, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BA1 8, 9, 16, I11 3 6 BALL, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
FLOATING BALL
BA1 8, 9, 16, I11 8 16 BALL, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
TRUNNION BALL, GO
BAF 9, 16, I11 3 6 BALL, 300#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING
BALL
BAF 09, 16, I11 8 16 BALL, 300#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP,
TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 3 PIPE, SCH 160, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 4 4 PIPE, SCH 120, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 6 8 PIPE, SCH XS, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 10 10 PIPE, SCH 80, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 12 16 PIPE, SCH 60, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
TEE 2 1/2 2 TEE, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 9000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
UNI 2 1/2 2 UNION, 9000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPS 2, 3 1/2 2 COUPLING, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"- ASME B 16.11
1-1/2")
SEP 3/4 2 SWAGE ECCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SE5 3 3/4 2 SWAGE ECCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB MSS SP-95
( SMALL SIZE= 1/2"-1-1/2")
SC5 3 3/4 2 SWAGE CONCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234- MSS SP-95
WPB ( SMALL SIZE= 1/2"-1-1/2")
SOL 2 1/2 2 SOCKOLET, 9000#, BW x SW, KILLED CS, ASTM A105 (HEADER 3"- 16") MSS SP-97
TOL 2, I3 1/2 2 THREADOLET, 9000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 16" MSS SP-97
)
64 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
65 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
NPE 4 1/2 2 BRANCH NIPPLE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 16 BASKET TEMPORARY PUMP SUCTION STRAINER, 300#, RF, BASKET 316SS,
40 MESH
YST 2 1/2 16 Y-STRAINER, 300#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
SPE 1/2 12 FIGURE 8, 300#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B 16.48
SPA 14 16 SPACER, 300#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME B ASME B16.48
16.48
BLA 14 16 BLIND, 300#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME B ASME B16.48
16.48
66 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
67 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
16 T
14 B T
12 B B T
10" B B B T
8" B B B B T
BRANCH SIZE
6" B B B B B T
4" B B B B B B T
3" B B B B B B B T
2" S S S S S S S S T
1½" S S S S S S S S TR T
1" S S S S S S S S TR TR T
3/4" S S S S S S S S TR TR TR T
½" S S S S S S S S TR TR TR TR T
16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
68 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 15, 16 1/2 2 GATE, 600# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 3 6 GATE, 600# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 8 24 GATE, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB,
GO
GLS 16 1/2 2 GLOBE, 800#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 6 GLOBE, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 8 12 GLOBE, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 24 CHECK, H OR V, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING TYPE,
BC
CHW 16, I6 3 24 CHECK, H OR V, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER TYPE,
DUAL PLATE, NON-SLAM
BAS 9, 16, S2, 1/2 2 BALL, 600#, MPE, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
I11
BAV 9, 16, S2, 1/2 2 BALL, 600#, MPE X THRD, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING
I11 BALL
BA4 9, 16, I11 1/2 2 BALL, 600#, SW, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BA1 8, 9, 16, I11 3 6 BALL, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
FLOATING BALL
BA1 8, 9, 16, I11 8 24 BALL, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP,
TRUNNION BALL, GO
BAF 9, 16, I11 3 6 BALL, 600#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING
BALL
BAF 09, 16, I11 8 24 BALL, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP,
TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH 160, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 24 PIPE, SCH 80, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
90E 2 1/2 2 90° ELBOW, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
45E 2 1/2 2 45° ELBOW, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAP 2 1/2 2 CAP, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAT 2, 3 1/2 2 CAP, 6000#, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
TEE 2 1/2 2 TEE, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 6000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
RTE 2 3/4 2 REDUCER TEE, 6000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1-1/2") ASME B 16.11
UNI 2 1/2 2 UNION, 6000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPL 2, 3 1/2 2 COUPLING, 6000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 6000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1- ASME B 16.11
1/2")
SEP 3/4 2 SWAGE ECCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SE5 3 3/4 2 SWAGE ECCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SC5 3 3/4 2 SWAGE CONCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB MSS SP-95
( SMALL SIZE= 1/2"-1-1/2")
SOL 2 1/2 2 SOCKOLET, 6000#, BW x SW, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
TO6 2, I3 1/2 2 THREADOLET, 6000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
69 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
NPE 4 1/2 2 BRANCH NIPPLE, SCH 160, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH 160, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH 160, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 24 BASKET TEMPORARY PUMP SUCTION STRAINER, 600#, RF, BASKET 316SS, 40
MESH
YST 2 1/2 24 Y-STRAINER, 600#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
SPE 1/2 12 FIGURE 8, 600#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B ASME B16.48
16.48
SPA 14 24 SPACER, 600#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B ASME B16.48
16.48
BLA 14 24 BLIND, 600#, RF, ASTM A516-70, STANDARD FINISH, DESIGN PER ASME B ASME B16.48
16.48
IK6 1/2 24 INSULATION KIT: 600# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK6 1/2 24 INSULATION KIT: 600# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
GASKETS
GR6 1/2 16 SPW, 304SS, FLAT RING, 600#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING,ASME B 16,5/API 601
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
70 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
71 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 15, 16 1/2 2 GATE, 600# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 3 6 GATE, 600# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 8 24 GATE, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB, GO
GLS 16 1/2 2 GLOBE, 800#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 6 GLOBE, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 8 12 GLOBE, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 24 CHECK, H OR V, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING TYPE, BC
CHW 16, I6 3 24 CHECK, H OR V, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER TYPE,
DUAL PLATE, NON-SLAM
BAS 9, 16, S2, I11 1/2 2 BALL, 600#, MPE, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BAV 9, 16, S2, I11 1/2 2 BALL, 600#, MPE X THRD, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING
BALL
BA4 9, 16, I11 1/2 2 BALL, 600#, SW, ASTM A105 BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BA1 8, 9, 16, I11 3 6 BALL, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP, FLOATING
BALL
BA1 8, 9, 16, I11 8 24 BALL, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, FP, TRUNNION
BALL, GO
BAF 9, 16, I11 3 6 BALL, 600#, RF, ASTM A216-WCB, BODY, TRIM 316SS, RTFE, RP, FLOATING BALL
BAF 09, 16, I11 8 24 BALL, 600#, RF, ASTM A216-WCB BODY, TRIM 316SS, RTFE SEATS, RP, TRUNNION
BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 20 PIPE, SCH 80, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 24 24 PIPE, 1.0 IN THICK, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
90E 2 1/2 2 90° ELBOW, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
45E 2 1/2 2 45° ELBOW, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAP 2 1/2 2 CAP, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAT 2, 3 1/2 2 CAP, 9000#, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
TEE 2 1/2 2 TEE, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 9000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
RTE 2 3/4 2 REDUCER TEE, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1-1/2") ASME B 16.11
UNI 2 1/2 2 UNION, 9000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPL 2, 3 1/2 2 COUPLING, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1- ASME B 16.11
1/2")
SEP 3/4 2 SWAGE ECCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( SMALL MSS SP-95
SIZE= 1/2"-1-1/2")
SCP 3/4 2 SWAGE CONCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( SMALL MSS SP-95
SIZE= 1/2"-1-1/2")
SE5 3 3/4 2 SWAGE ECCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SC5 3 3/4 2 SWAGE CONCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SO6 2 1/2 2 SOCKOLET, 9000#, BW x SW, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
TO6 2, I3 1/2 2 THREADOLET, 9000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
72 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
NPE 4 1/2 2 BRANCH NIPPLE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 3" ASME B 36.10
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 600#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 24 BASKET TEMPORARY PUMP SUCTION STRAINER, 600#, RF, BASKET 316SS, 40
MESH
YST 2 1/2 24 Y-STRAINER, 600#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
SPE 1/2 12 FIGURE 8, 600#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME ASME B16.48
B16.48
SPA 14 24 SPACER, 600#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PERASME B16.48 ASME B16.48
BLA 14 24 BLIND, 600#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME B16.48 ASME B16.48
IK6 1/2 24 INSULATION KIT: 600# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK6 1/2 24 INSULATION KIT: 600# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
GASKETS
GR6 1/2 16 SPW, 304SS, FLAT RING, 600#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING, ASME B 16,5/API 601
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
73 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
74 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GAF 15, 16 1/2 2 GATE, 900# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 3 4 GATE, 900# , RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB
GAF 16 6 24 GATE, 900#, RF, ASTM A216-WCB BODY, TRIM 316SS, FP, FLEX WEDGE, BB,
GO
GLS 16 1/2 2 GLOBE, 1500#, SW, ASTM A105 BODY, TRIM 316SS, T-BODY, BB
GLF 16 3 4 GLOBE, 900#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB
GLF 16 6 12 GLOBE, 900#, RF, ASTM A216-WCB BODY, TRIM 316SS, T-BODY, BB, GO
CHS 16 1/2 2 CHECK, H OR V, 1500#, SW, ASTM A105 BODY, TRIM 316SS, SWING TYPE, WC
CHF 16 3 24 CHECK, H OR V, 900#, RF, ASTM A216-WCB BODY, TRIM 316SS, SWING TYPE,
BC
CHW 16, I6 3 24 CHECK, H OR V, 900#, RF, ASTM A216-WCB BODY, TRIM 316SS, WAFER TYPE,
DUAL PLATE, NON-SLAM
BAV 9, 16 1/2 2 BALL, 1500#, SWxTHRD, ASTM A105 BODY, 316SS BALL & TRIM, LO
,FURNISHED WITH ONE PLAIN END NIPPLE ON SW END, FIRE SAFE, API
6D/ASME B16.4, RTFE, RP
BA4 9, 16 1/2 2 BALL, 1500#, SW, ASTM A105 BODY, 316SS BALL & TRIM, LO ,FURNISHED
WITH PE WELDED NIPPLES, FIRE SAFE, API 6D/ASME B16.4, RP
BAF 9, 16 3 3 BALL, 900#, RF, ASTM A216-WCB BODY, 316SS BALL & TRIM, RP, TRUNNION
BALL, API 6D
BAF 9, 16 4 24 BALL, 900#, RF, ASTM A216-WCB BODY, 316SS BALL & TRIM, RP, TRUNNION
BALL, API 6D, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH XXS, PE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 3 3 PIPE, SCH 160, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
PIP 1, 9 4 24 PIPE, SCH 120, BE, SMLS, KILLED CS, ASTM A106-B ASME B 36.10
FITTINGS SOCKET WELD
PRT 2, 3 1/2 2 PLUG, ROUND HEAD, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
90E 2 1/2 2 90° ELBOW, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
45E 2 1/2 2 45° ELBOW, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAP 2 1/2 2 CAP, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CAT 2, 3 1/2 2 CAP, 9000#, THRD, NPT, KILLED CS, ASTM A105 ASME B 16.11
TEE 2 1/2 2 TEE, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
TE1 2, I3 1/2 2 TEE, 9000#, SW X SW X THRD, KILLED CS, ASTM A105 ASME B 16.11
RTE 2 3/4 2 REDUCER TEE, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1-1/2") ASME B 16.11
UNI 2 1/2 2 UNION, 9000#, SW, KILLED CS, ASTM A105, INTEGRAL SEAT MSS SP-83
CPL 2, 3 1/2 2 COUPLING, 9000#, SW, KILLED CS, ASTM A105 ASME B 16.11
CRD 2,3 3/4 2 REDUCER COUPLING, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1- ASME B 16.11
1/2")
SEP 3 3/4 2 SWAGE ECCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SCP 3 3/4 2 SWAGE CONCENTRIC, SCH XXS, PE, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SE5 3/4 2 SWAGE ECCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SC5 3/4 2 SWAGE CONCENTRIC, SCH XXS, LEP-SET, SMLS, KILLED CS, ASTM A234-WPB MSS SP-95
( SMALL SIZE= 1/2"-1-1/2")
RTE 2 3/4 2 REDUCER TEE, 9000#, SW, KILLED CS, ASTM A105 ( SMALL SIZE= 1/2"-1-1/2") ASME B 16.11
SO9 2 1/2 2 SOCKOLET, 9000#, BW x SW, KILLED CS, ASTM A105 ( HEADER 3"- 24" ) MSS SP-97
TO9 2, I3 1/2 2 THREADOLET, 9000#, BW x THRD, KILLED CS, ASTM A105 ( HEADER 3"- 24") MSS SP-97
75 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
NTO 3, 4 1/2 2 BRANCH NIPPLE, SCH XXS, TOE, SMLS, KILLED CS, ASTM A106-B, LENGTH 6" ASME B 36.10
MISCELLANEOUS
YST 861 1/2 2 Y-STRAINER, 900#, SW, ASTM A105 BODY, W/304 SS SCREEN, 20 MESH.
YS1 860 1/2 2 Y-STRAINER, 900#, SW, ASTM A105 BODY, W/304 SS SCREEN, 100 MESH.
BST 2 24 BASKET TEMPORARY PUMP SUCTION STRAINER, 900#, RF, BASKET 316SS,
40 MESH
YST 2 1/2 24 Y-STRAINER, 900#, RF, ASTM A216-WCB BODY, SCREEN 316SS, 8 MESH
SPE 1/2 12 FIGURE 8, 900#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME B ASME B16.48
16.48
SPA 14 24 SPACER, 900#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PERASME B ASME B16.48
16.48
BLA 14 24 BLIND, 900#, RF, ASTM A516-70N, STANDARD FINISH, DESIGN PER ASME B ASME B16.48
16.48
IK9 1/2 24 INSULATION KIT: 900# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK9 1/2 24 INSULATION KIT: 900# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
GASKETS
GR9 1/2 16 SPW, 304SS, FLAT RING, 900#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING, ASME B 16,5/API 601
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
76 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
77 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GLF 16 3 8 GLOBE, 150#, RF, OS&Y, ASTM A351-CF8M BODY, TRIM 12 (316SS/HF), BB
GLF 16 10 16 GLOBE, 150#, RF, OS&Y, ASTM A351-CF8M BODY, TRIM 12 (316SS/HF), BB, GO
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A182-F316L BODY, SWING TYPE, TRIM 12
(316SS/HF), BC
BAS 9, S2,16, I11 1/2 2 BALL, 300#, MPE, ASTM A182-F316L BODY, 316SS BALL AND TRIM, RTFE
SEATS, RP, FIRE SAFE, FLOATING BALL
BA1 8 , 9,16, I11 3 6 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE
SEATS, FP, FIRE SAFE, FLOATING BALL
BA1 8 , 9,16, I11 8 24 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE
SEATS, FP, FIRE SAFE, TRUNNION BALL, GO
BAF 9,16, I11 3 6 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE
SEATS, RP, FIRE SAFE, FLOATING BALL
BAF 9, 16, I11 8 24 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE
SEATS, RP, FIRE SAFE, TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH 40S, PE, SMLS, SS, ASTM A312-TP316/316L ASME B 36.19
PIP 1, 9 3 24 PIPE, SCH 10S, BE, SMLS, SS, ASTM A312-TP316/316L ASME B 36.19
PRT 2, 3 1/2 2 PLUG, ROUND HEAD, THRD, NPT, SS, ASTM A182-F316/F316L ASME B 16.11
90E 2 1/2 2 90° ELBOW, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
45E 2 1/2 2 45° ELBOW, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
CAP 2 1/2 2 CAP, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
CAT 2, 3 1/2 2 CAP, 3000#, THRD, NPT, SS, ASTM A182-F316/316L ASME B 16.11
TEE 2 1/2 2 TEE, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
TE1 2, I3 1/2 2 TEE, 3000#, SW X SW X THRD, SS, ASTM A182-F316/316L ASME B 16.11
SEP 2 3/4 2 SWAGE ECCENTRIC, SMLS, SCH 40S, PE, SS, ASTM A403-WP316/316L ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SCP 2 3/4 2 SWAGE CONCENTRIC, SMLS, SCH 40S, PE, SS, ASTM A403-WP316/316L ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SE5 2, 3 3/4 4 SWAGE ECCENTRIC, SMLS, SCH 40S, LEB-SEP, SS, ASTM A403-WP316/316L ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SC5 2, 3 3/4 4 SWAGE CONCENTRIC, SMLS, SCH 40S, LEB-SEP, SS, ASTM A403-WP316/316L MSS SP-95
( SMALL SIZE= 1/2"-1-1/2")
CRD 2 3/4 2 REDUCER COUPLING, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
RTE 2 1/2 2 REDUCER TEE, 3000#, SW, SS, ASTM A182-F316/316L ( SMALL SIZE= 1/2"-1- ASME B 16.11
1/2")
SOL 2 1/2 2 SOCKOLET, 3000#, BW x SW, ASTM A182-F316/316L ( HEADER 3"- 24" ) MSS SP-97
TOL 2,3, I3 1/2 2 THREADOLET, 3000#, BW x THRD, ASTM A182-F316/316L (HEADER 3"- 24") MSS SP-97
78 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
SPA 16 24 SPACER, 150#, RF, ASTM A240-316, SMOOTH FINISH PER ASME B 16.48 ASME B 16.48
BLA 16 24 BLIND, 150#, RF, ASTM A240-316, SMOOTH FINISH PER ASME B 16.48 ASME B 16.48
YST 1/2 2 Y-STRAINER, 600#, SW, ASTM A351-CF8M BODY, W/316 SS SCREEN, 20 MESH
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
GASKETS
GR1 1/2 24 SPW, 316SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 316LSS INNER FLEX CG
RING, 1/8" THK, ASME B 16,5/API 601
GR3 2 24 SPW, 316SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 316LSS INNER FLEX CG
RING, 1/8" THK, ASME B 16,5/API 601
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
79 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
80 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
GLF 16 3 8 GLOBE, 150#, RF, OS&Y, ASTM A351-CF8M BODY, TRIM 12 (316SS/HF), BB ASME B16.34
GLF 16 10 16 GLOBE, 150#, RF, OS&Y, ASTM A351-CF8M BODY, TRIM 12 (316SS/HF), BB, GO ASME B16.34
CHS 16 1/2 2 CHECK, H OR V, 800#, SW, ASTM A182-F316L BODY, SWING TYPE, TRIM 12 API 602
(316SS/HF), BC
CHW 16 3 24 CHECK, H OR V, 150#, RF, SWING TYPE, ASTM A351-CF8M BODY, TRIM 12 ASME B16.34
(316SS/HF), WAFER TYPE, BC
BAS 9, S2,16, I11 1/2 2 BALL, 300#, MPE, ASTM A182-F316L BODY, 316SS BALL AND TRIM, RTFE ASME B16.34
SEATS, RP, FIRE SAFE, FLOATING BALL
BA1 8 , 9,16, I11 3 6 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE ASME B16.34
SEATS, FP, FIRE SAFE, FLOATING BALL
BA1 8 , 9,16, I11 8 24 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE ASME B16.34
SEATS, FP, FIRE SAFE, TRUNNION BALL, GO
BAF 9,16, I11 3 6 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE ASME B16.34
SEATS, RP, FIRE SAFE, FLOATING BALL
BAF 9, 16, I11 8 24 BALL, 150#, RF, ASTM A351-CF8M BODY, 316SS BALL AND TRIM, RTFE ASME B16.34
SEATS, RP, FIRE SAFE, TRUNNION BALL, GO
PIPES
PIP 1, 9 1/2 2 PIPE, SCH 40S, PE, SMLS, SS, ASTM A312-TP316/316L ASME B 36.19
PIP 1, 9 3 24 PIPE, SCH 10S, BE, SMLS, SS, ASTM A312-TP316/316L ASME B 36.19
PRT 2, 3 1/2 2 PLUG, ROUND HEAD, THRD, NPT, SS, ASTM A182-F316/F316L ASME B 16.11
90E 2 1/2 2 90° ELBOW, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
45E 2 1/2 2 45° ELBOW, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
CAP 2 1/2 2 CAP, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
CAT 2, 3 1/2 2 CAP, 3000#, THRD, NPT, SS, ASTM A182-F316/316L ASME B 16.11
TEE 2 1/2 2 TEE, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
TE1 2, I3 1/2 2 TEE, 3000#, SW X SW X THRD, SS, ASTM A182-F316/316L ASME B 16.11
SEP 2 3/4 2 SWAGE ECCENTRIC, SMLS, SCH 40S, PE, SS, ASTM A403-WP316/316L ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SCP 2 3/4 2 SWAGE CONCENTRIC, SMLS, SCH 40S, PE, SS, ASTM A403-WP316/316L ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SE5 2, 3 3/4 2 SWAGE ECCENTRIC, SMLS, SCH 40S, LEP-SET, SS, ASTM A403-WP316/316L ( MSS SP-95
SMALL SIZE= 1/2"-1-1/2")
SC5 2, 3 3/4 2 SWAGE CONCENTRIC, SMLS, SCH 40S, LEP-SET, SS, ASTM A403-WP316/316L MSS SP-95
( SMALL SIZE= 1/2"-1-1/2")
CRD 2 3/4 2 REDUCER COUPLING, 3000#, SW, SS, ASTM A182-F316/316L ASME B 16.11
RTE 2 3/4 2 REDUCER TEE, 3000#, SW, SS, ASTM A182-F316/316L ( SMALL SIZE= 1/2"-1- ASME B 16.11
1/2")
SOL 2 1/2 2 SOCKOLET, 3000#, BW x SW, ASTM A182-F316/316L ( HEADER 3"- 24" ) MSS SP-97
TOL 2,3, I3 1/2 2 THREADOLET, 3000#, BW x THRD, ASTM A182-F316/316L (HEADER 3"- 24") MSS SP-97
81 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
NPE 4 1/2 2 BRANCH NIPPLE, SCH 80S, PE, SS, ASTM A312-TP316/316L, LENGTH 6" ASME B 36.10
NTO 3,4 1/2 2 BRANCH NIPPLE, SCH 80S, TOE, SS, ASTM A312-TP316/316L, LENGTH 3" ASME B 36.10
NTO 3,4 1/2 2 BRANCH NIPPLE, SCH 80S, TOE, SS, ASTM A312-TP316/316L, LENGTH 6" ASME B 36.10
MISCELLANEOUS
BLA 1/2 2 BLIND, 150#, RF, ASTM A240-316, SMOOTH FINISH, PER ASME B16.48 ASME B16.48
SPE 1/2 14 FIGURE 8, 150#, RF, ASTM A240-316, SMOOTH FINISH PER ASME B16.48 ASME B16.48
SPA 16 24 SPACER, 150#, RF, ASTM A240-316, SMOOTH FINISH PER ASME B16.48 ASME B16.48
BLA 16 24 BLIND, 150#, RF, ASTM A240-316, SMOOTH FINISH PER ASME B16.48 ASME B16.48
YST 1/2 2 Y-STRAINER, 600#, SW, ASTM A351-CF8M BODY, W/316 SS SCREEN, 20 MESH
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES, 2 WASHER/EACH SIDE, REF PSI
IK1 1/2 24 INSULATION KIT: 150# RF, TYPE F, 1/8", PHENOLIC RETAINER, NITRILE SEAL,
MYLAR SLEEVES (PLUS FIGURE 8), 2 WASHER/EACH SIDE, REF PSI
GASKETS
GR1 1/2 24 SPW, 316SS, FLAT RING, 150#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING, ASME B 16,5/API 601
GR3 2 24 SPW, 316SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, 316LSS FLEX CG
INNER RING, ASME B 16,5/API 601
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
82 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
83 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
84 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
FLANGES
CR1 2 1/2 2 SOCKET WELD FLANGE, 300#, RF, SS, SCH 40S, ASTM A182- ASME B 16.5
F316/316L, STANDARD FINISH
WR1 2 3 6 WELDING NECK, 300#, SCH 10S, RF, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
WR1 2 8 10 WELDING NECK, 300#, SCH 20, RF, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
WR1 2 12 24 WELDING NECK, 300#, SCH 30, RF, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
ORI 2 3 6 WELDING NECK ORIFICE SET, 300#, RF, SCH 10S, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
ORI 2 8 10 WELDING NECK ORIFICE SET, 300#, RF, SCH 20, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
ORI 2 12 24 WELDING NECK ORIFICE SET, 300#, RF, SCH 30, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
BR1 2 1/2 24 BLIND FLANGE, 300#, RF, SS, ASTM A182-F316/316L, STANDARD ASME B 16.5
FINISH
85 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
SPE 1/2 12 FIGURE 8, 300#, RF, ASTM A240-316, SMOOTH FINISH PER ASME ASME B 16.48
B16.48
SPA 14 24 SPACER, 300#, RF, ASTM A240-316, SMOOTH FINISH PER ASME ASME B 16.48
B16.48
BLA 14 24 BLIND, 300#, RF, ASTM A240-316, SMOOTH FINISH PER ASME B16.48 ASME B 16.48
YST 1/2 2 Y-STRAINER, 600#, SW, ASTM A351-CF8M BODY, W/316 SS SCREEN,
20 MESH
GASKETS
GR3 1/2 24 SPW, 316SS, FLAT RING, 300#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, FLEX CG
316LSS INNER RING, ASME B 16,5/API 601
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
86 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
87 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
88 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
45E 2 3 6 45° ELBOW, LR, SCH 40S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
90E 2 8 10 90° ELBOW, LR, SCH 80S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
45E 2 8 10 45° ELBOW, LR, SCH 80S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
90E 2 12 24 90° ELBOW, LR, SCH 80, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
45E 2 12 24 45° ELBOW, LR, SCH 80, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
TEE 2 3 6 TEE, SCH 40S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
TEE 2 8 10 TEE, SCH 80S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
TEE 2 12 24 TEE, SCH 80, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
RTE 2 4 6 REDUCER TEE, SCH 40S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
(SMALL SIZE= 3"-4")
RTE 2 8 10 REDUCER TEE, SCH 80S X SCH 40S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 4"-6")
RTE 2 10 10 REDUCER TEE, SCH 80S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
(SMALL SIZE= 8")
RTE 2 12 14 REDUCER TEE, SCH 80 X SCH 80S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 8"-10")
RTE 2 14 24 REDUCER TEE, SCH 80, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
(SMALL SIZE= 12"-20")
CAP 2 3 6 CAP, SCH 40S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
CAP 2 8 10 CAP, SCH 80S, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
CAP 2 12 24 CAP, SCH 80, BW, SS, ASTM A403-WP316/316L-W ASME B 16.9
CRE 2 4 6 REDUCER CONCENTRIC, SCH 40S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 3"-4")
ERE 2 4 6 REDUCER ECCENTRIC, SCH 40S, BW, SS, ASTM A403-WP316/316L- ASME B 16.9
W (SMALL SIZE= 3"-4")
CRE 2 8 10 REDUCER CONCENTRIC, SCH 80S X 40S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 4"-6")
ERE 2 8 10 REDUCER ECCENTRIC, SCH 80S X SCH 40S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 4"-6")
CRE 2 10 10 REDUCER CONCENTRIC, SCH 80S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 8")
ERE 2 10 10 REDUCER ECCENTRIC, SCH 80S, BW, SS, ASTM A403-WP316/316L- ASME B 16.9
W (SMALL SIZE= 8")
CRE 2 12 16 REDUCER CONCENTRIC, SCH 80 X 40S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 6"-10")
ERE 2 12 16 REDUCER ECCENTRIC, SCH 80 X 40S, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 6"-10")
CRE 2 14 24 REDUCER CONCENTRIC, SCH 80, BW, SS, ASTM A403- ASME B 16.9
WP316/316L-W (SMALL SIZE= 12"-20")
ERE 2 14 24 REDUCER ECCENTRIC, SCH 80, BW, SS, ASTM A403-WP316/316L- ASME B 16.9
W (SMALL SIZE= 12"-20")
WOL 2, 5 3 6 WELDOLET, SCH 40S, BW, ASTM A182-F316/316L (HEADER 8"- MSS SP-97
24")
FLANGES
CR1 2 1/2 2 SOCKET WELD FLANGE, 600#, RF, SS, SCH 40S, ASTM A182- ASME B 16.5
F316/316L, STANDARD FINISH
WR1 2 3 6 WELDING NECK, 600#, SCH 40S, RF, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
WR1 2 8 10 WELDING NECK, 600#, SCH 80S, RF, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
WR1 2 12 24 WELDING NECK, 600#, SCH 80, RF, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
ORI 2 3 6 WELDING NECK ORIFICE SET, 600#, RF, SCH 40S, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
ORI 2 8 10 WELDING NECK ORIFICE SET, 600#, RF, SCH 80S, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
ORI 2 12 24 WELDING NECK ORIFICE SET, 600#, RF, SCH 80, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
BR1 2 1/2 24 BLIND FLANGE, 600#, RF, SS, ASTM A182-F316/316L, STANDARD ASME B 16.5
FINISH
89 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
90 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
91 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
TOL 2,3, I3 1/2 2 THREADOLET, 3000#, BW x THRD, ASTM A182-F316/316L (HEADER MSS SP-97
3"- 24")
92 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
WOL 2, 5 4 6 WELDOLET, SCH 80S, BW, ASTM A182-F316/316L (HEADER 10"- 24") MSS SP-97
FLANGES
CR1 2 1/2 2 SOCKET WELD FLANGE, 1500#, RTJ, SS, SCH 40S, ASTM A182- ASME B 16.5
F316/316L, STANDARD FINISH
WR1 2 3 3 WELDING NECK, 900#, SCH 40S, RTJ, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
WR1 2 4 6 WELDING NECK, 900#, SCH 80S, RTJ, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
WR1 2 8 24 WELDING NECK, 900#, SCH 100, RTJ, SS, ASTM A182-F316/316L, ASME B 16.5
STANDARD FINISH
ORI 2 3 3 WELDING NECK ORIFICE SET, 900#, RTJ, SCH 40S, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
ORI 2 6 4 WELDING NECK ORIFICE SET, 900#, RTJ, SCH 80S, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
ORI 2 8 24 WELDING NECK ORIFICE SET, 900#, RTJ, SCH 100, SS, ASTM A182- ASME B16,36
F316/316L, STANDARD FINISH
BR1 2 1/2 2 BLIND FLANGE, 1500#, RTJ, SS, ASTM A182-F316/316L, STANDARD ASME B 16.5
FINISH
BR1 2 3 24 BLIND FLANGE, 900#, RTJ, SS, ASTM A182-F316/316L, STANDARD ASME B 16.5
FINISH
93 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
YST 1/2 2 Y-STRAINER, 1500#, SW, ASTM A351-CF8M BODY, W/316 SS SCREEN,
20 MESH
GASKETS
GR3 1/2 2 SPW, 316SS, OVAL RING, 1500#, FLEXIBLE GRAPHITE FILLER, 1/8" FLEX CG
THK, 316LSS INNER RING, ASME B16.20
GR3 3 24 SPW, 316SS, OVAL RING, 900#, FLEXIBLE GRAPHITE FILLER, 1/8" THK, FLEX CG
316LSS INNER RING, ASME B16.20
BOLTINGS
STU 1/2 1 1/4 STUD BOLTS, ASTM A193-B7M WITH 2 NUTS A194-2HM
94 of 100
PIPING MATERIAL SPECIFICATION
H1M0011503-CO4D3-MD16012
24 T
20 P T
18 B B T
16 B B B T
14 B B B B T
12 B B B B B T
BRANCH SIZE
10" B B B B B B T
8" B B B B B B B T
6" B B B B B B B B T
4" B B B B B B B B B T
3" B B B B B B B B B B T
2" S S S S S S S S S S S T
1½" S S S S S S S S S S S TR T
1" S S S S S S S S S S S TR TR T
3/4" S S S S S S S S S S S TR TR TR T
½" S S S S S S S S S S S TR TR TR TR T
24 20 18 16 14 12 10" 8" 6" 4" 3" 2" 1½" 1" 3/4" ½"
HEADER SIZE
B : BRANCH WELD
T : STRAIGHT TEE
TR : REDUCING TEE
S : SOCKOLET
W : WELDOLET
B : BRANCH WELD W/PAD
95 of 100
PIPING MATERIAL SPECIFICATION
NOTES
01. Where pipe schedules are shown under "SCH/RAT" it is adequate full for the
flange rating. Where "CALC" is shown, the pressure limit may be lower than flange
rating.
02. All Buttweld and Socketweld component thicknesses shall match pipe
thicknesses.
03. Threaded joint is permitted only at terminal of vent, drain and hydrostatic
connections, at instrument take-off points and to match equipment.
05. Integrally reinforced branch connections are permitted outside the sizes shown
in the branch connection table for special applications (e.g. Hot tap connections,
etc). Designer shall check weld thickness of integrally reinforced branch to
determine if PWHT is requiered.
06. Threaded by Socketweld (T/SW) valves shall be used only for vent, drain, and
instrument connections.
07. These valves have no flanges but are installed between line flanges with extra
length bolts.
10. Per ASME B 16.5, flange dimensions to class 900 and class 1500 are the
same in the range NPS 1/2” to NPS 2 1/2".
11. Provide Flat Face flanges adjacent to flat face equipment nozzles.
12. To be used only to match class 300 rated flange connections at control Valves
and special equipment.
N° DOC. PDVSA
Review 0 Page
INGENIERÍA Y CONSTRUCCIÓN H1M0011503-CO4D3-MD16012
N° DOC. INELECTRA
Date Sep 15 96 de 100
SCHLUMBERGER / INELECTRA 1345-01-10-T01-ESP-001
PIPING MATERIAL SPECIFICATION
19. SCH 160 pipe and pipe nipples shall be used for threaded connections for
sizes NPS 1/2" - 1 1/2"
20. SCH XXS pipe and pipe nipples shall be used for threaded connections for
sizes NPS 1/2" - 2"
21. SCH 40S pipe and pipe nipples shall be used for threaded connections for
sizes NPS 1" - 2"
25. Weld neck flanges shall be used when mating against resilient seated butterfly
valves
26. Pressure (PSIG)-temperature (°F) rating for this class are as follows:
NPS
8" 10" 12" 18" 20" 24"
-20° to 100° 2073 2078 2211 1871 1912 1974
200° 2035 2035 2035 1871 1912 1975
300° 1965 1965 1965 1871 1912 1965
400° 1900 1900 1900 1871 1900 1900
27. Pipe and pipe components thicker than 1/2 inch may require impact tested
materials when the minimum design temperature is below 100°F (see ASME B31.3
Paragraph 323.2.2)
128. Pipe and piping components shall be externally coated in accordance with
M.W. Kellog technical standard P42-4TS, "shop and field coating requirements for
underground piping".
N° DOC. PDVSA
Review 0 Page
INGENIERÍA Y CONSTRUCCIÓN H1M0011503-CO4D3-MD16012
N° DOC. INELECTRA
Date Sep 15 97 de 100
SCHLUMBERGER / INELECTRA 1345-01-10-T01-ESP-001
PIPING MATERIAL SPECIFICATION
704. Bolting torque and general installation practices shall be in full accordance
with manufacturer’s instructions.
878. A circular Blank W/A Spacer shall be used in place of a FIG. 8 Blank for cold
insulated piping below 70°F.
I1. Corrosion allowance 0.04 IN only for diameter 30 IN. Pressure temperature
rating are as follows:
I2. Only for use in reducers with double schedules (see pipes' schedules).
I10. Only for 20" gas lines with corrosion allowance = 0, 24 IN with the following
pressure/temperature limits: 177 psig / -20 to 400°F.
I11. This valve must be used only for temperatures until 450°F.
N° DOC. PDVSA
Review 0 Page
INGENIERÍA Y CONSTRUCCIÓN H1M0011503-CO4D3-MD16012
N° DOC. INELECTRA
Date Sep 15 98 de 100
SCHLUMBERGER / INELECTRA 1345-01-10-T01-ESP-001
PIPING MATERIAL SPECIFICATION
I16. If NPS 1/2" threaded pipe or threaded fitting is required, shall be used SCH
XXS or 6000#.
I18. The minimum temperature limit shown in spec 3CB2P header is the lowest
temperature to be used in Cerro Negro DB/GFM project; however this spec can be
used at temperatures below this limit only if this temperature is higher than the
following values
If the temperature is lower than the values shown, impact test is required
I19. The minimum temperature limit shown in spec 6CB2P header is the lowest
temperature to be used in Cerro Negro DB/GFM project; however this spec can be
used at temperatures below this limit only if this temperature is higher than the
following values:
SIZE (NPS) MIN TEMPERATURE (°F)
1/2 TO 8 -20
10 2
12 9
14 15
16 25
18 29
20 36
24 44
If the temperature is lower than the values shown, impact test is required
N° DOC. PDVSA
Review 0 Page
INGENIERÍA Y CONSTRUCCIÓN H1M0011503-CO4D3-MD16012
N° DOC. INELECTRA
Date Sep 15 99 de 100
SCHLUMBERGER / INELECTRA 1345-01-10-T01-ESP-001
PIPING MATERIAL SPECIFICATION
I20. The minimum temperature limit shown in spec 9CB2P header is the lowest
temperature to be used in Cerro Negro DB/GFM project, however this spec can be
used at temperatures below this limit only if this temperature is higher than the
following values:
If the temperature is lower than the values shown, impact test is required
I21. When required, ball valves will be provided with locking devices. EMDC will
supply locking devices for globe and gate valves if needed.
82. Valve shall be furnished with 3" nipples to be supplied and welded by valve
manufacturer.
N° DOC. PDVSA
Review 0 Page
INGENIERÍA Y CONSTRUCCIÓN H1M0011503-CO4D3-MD16012
N° DOC. INELECTRA
Date Sep 15 100 de 100
SCHLUMBERGER / INELECTRA 1345-01-10-T01-ESP-001