Documente Academic
Documente Profesional
Documente Cultură
3 SYSTÈMES D’ASSEMBLAGE
3.1 ÉQUIPEMENTS DE SOUDAGE............................................................................................................................................................................70
3.2 SOUDAGE PAR POLYFUSION.............................................................................................................................................................................73
3.2.1 AVERTISSEMENTS ET RECOMMANDATIONS PRÉLIMINAIRES.......................................................................................................................73
3.2.2 POLYFUSION : RACCORDS.................................................................................................................................................................................74
3.2.3 POLYFUSION: RACCORDS CAVALIER.................................................................................................................................................................77
3.2.4 TABLEAU DIMENSIONS RACCORDS CAVALIER................................................................................................................................................79
3.2.5 POLYFUSION: RÉPARATION DE LA CANALISATION ENDOMMAGÉE..............................................................................................................80
3.3 ÉLECTROFUSION................................................................................................................................................................................................82
3.3.1 AVERTISSEMENTS POUR LES SYSTÈMES « WHITE BLUE » ET « DARK »......................................................................................................86
3.4 SOUDAGE BOUT À BOUT ..................................................................................................................................................................................87
3.4.1 INTRODUCTION..................................................................................................................................................................................................87
3.4.2 RECOMMANDATIONS ET AVERTISSEMENTS...................................................................................................................................................87
3.4.3 PHASES DE RÉALISATION.................................................................................................................................................................................88
CATALOGUE: PPR/2014
REVISION: 01
DATE DE VALIDITÉ: 01-06-2014
NOME DU FICHIER: NUPIGECO PPR Piping System _fra
5 CATALOGUE PRODUITS
5.1 TUYAUX EN POLYPROPYLÈNE.........................................................................................................................................................................144
5.1.1 TUYAU NIRON POUR INSTALLATIONS HYDRO-SANITAIRES & HYDRONIQUES..........................................................................................144
5.1.2 TUYAU NIRON POUR INSTALLATIONS HYDRO-SANITAIRES & HYDRONIQUES..........................................................................................152
5.1.3 TUYAU NIRON POUR EAU DE PLUIE...............................................................................................................................................................155
5.1.4 TUYAU NIRON PRÉ-ISOLÉ...............................................................................................................................................................................156
5.1.5 TUYAU NIRON AVEC BARRIÈRE ANTI-OXYGÈNE...........................................................................................................................................159
5.1.6 TUYAU NIRON AVEC PROTECTION CONTRE LES RAYONS UV.......................................................................................................................162
5.1.7 TUYAU NIRON AVEC BARRIÈRE CHIMIQUE....................................................................................................................................................166
5.2 RACCORDS PAR POLYFUSION.........................................................................................................................................................................168
5.2.1 RACCORDS À POLYFUSION..............................................................................................................................................................................168
5.2.2 VALVES..............................................................................................................................................................................................................201
5.2.3 RACCORDS SPÉCIAUX......................................................................................................................................................................................209
5.2.4 RACCORDS ELECTROSOUDABLES...................................................................................................................................................................220
5.3 RACCORDS À COMPRESSION EN PPR.............................................................................................................................................................224
5.4 RACCORDS À COMPRESSION EN PVDF..........................................................................................................................................................228
5.5 RACCORDS PRÉ-ISOLÉS...................................................................................................................................................................................232
5.6 OUTILLAGE.......................................................................................................................................................................................................257
OHSAS 18001
Avant-garde
industrielle dans le
transport de fluides
Installations hydro-sanitaires
liquides et gazeux
Chauffage
avec des systèmes en
Aqueducs
matériau plastique Gazoducs
Irrigation
Transport de fluides alimentaires
Conditionnement
Rafraîchissement
Installations industrielles
Industrie pétrolière
Secteur chimique
Secteur pétrochimique
6
QUI NOUS SOMMES Nos chiffres
- Présents sur le marché depuis plus de 40 ans
- 22 lignes de produits
- 300 employés
- 3 établissements de production en Italie
- 3 établissements de production dans le monde (États-
Unis, Brésil, Chine)
- 26 lignes d'extrusion en Italie, 4 lignes aux États-Unis, 3
lignes en Chine et 2 lignes au Brésil
- 40 machines à injection pour la production de raccords
- 9 entrepôts en Europe et dans le reste du monde
(Allemagne, France, Espagne, Belgique, Royame-Uni,
États-Unis, Brésil, Chine, Émirats Arabes Unis)
- 1 0 % du chiffre d'affaires investi dans la Recherche et le
Développement
- 1 50.000 m2 la surface occupée par les établissements
NUPIGECO dans le monde
CVCR
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
TUYAU MONOCOUCHE
DE SDR 11 - S 5 SDR 9 - S 4
In mm Ép. DI kg/m litres/m Ép. DI kg/m litres/m
16
1/2” 20
3/4” 25
1” 32 2,9 26,20 0,26 0,54 3,6 24,80 0,31 0,48
1 1/4” 40 3,7 32,60 0,40 0,83 4,5 31,00 0,48 0,75
1 1/2” 50 4,6 40,80 0,63 1,31 5,6 38,80 0,74 1,18
2” 63 5,8 51,40 0,99 2,07 7,1 48,80 1,17 1,87
2 1/2” 75 6,8 61,40 1,37 2,96 8,4 58,20 1,65 2,66
3” 90 8,2 73,60 1,99 4,25 10,1 69,80 2,38 3,82
4” 110 10,0 90,00 2,96 6,36 12,3 85,40 3,54 5,73
125 11,4 102,20 3,84 8,20 14,0 97,00 4,58 7,39
6” 160 14,6 130,80 6,22 13,43 17,9 124,20 7,46 12,11
8” 200 18,2 163,60 9,76 21,01 22,4 155,20 11,57 18,91
VALEURS EXTRAITES DIN 8077 ISO 15874 250 22,7 204,60 15,00 32,86 27,9 194,20 17,96 29,61
DES NORMES ISO 4065 10” 315 28,6 257,80 23,70 52,17 35,2 244,60 28,36 46,97
DE Diamètre externe 355 32,2 290,60 30,00 66,29 39,7 275,60 35,95 59,62
Ép. Épaisseur 16” 400 36,3 327,40 38,20 84,14 44,7 310,60 45,50 75,73
DI Diamètre interne 450 40,9 368,20 48,10 106,42
kg/m Kilogrammes par mètre
20” 500 45,4 409,20 59,10 131,44
litres/m Litres par mètre
SDR Rapport diamètre/épaisseur 560 50,8 458,40 74,00 164,95
S Série (SDR-1)/2 24” 630 57,2 515,60 93,50 208,69
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
N.B.: Pour plus d’informations sur la compatibilité chimique, voir les tableaux en fin de catalogue
PPR
Valeurs
Paramètre UM Paramètres d'essai Méthode d'essai
requises
Résistance à la pression interne h >1 T = 20 C = 16 MPa EN ISO 1167
PP-RCT
Valeurs
Paramètre UM Paramètres d'essai Méthode d'essai
requises
Résistance à la pression interne h >1 T = 20 C = 15 MPa EN ISO 1167
Caractéristiques physiques
PPR et PP-RCT
Paramètre UM Valeurs requises Paramètres d'essai Méthode d'essai
Retraits à chaud % <2 T = 135 C EN743 Méthode B
e8 mm --> t = 1 h
8<e16 mm --> t = 2 h
e>16 mm --> t = 4 h
Résistance au % aucune rupture T = 0 C ISO/DIS 9854
choc
MFI % 30, différence T = 230 C m = 2,16 kg ISO 1133,
maximum entre CONDITION 12 /
tuyau et MP UNI5640/74
PPR
Paramètre UM Valeurs requises Paramètres d'essai Méthode d'essai
Stabilité ther- h >8760 = 1,9 Mpa - T = 110 C EN ISO 1167
mique moyen-
nant essais sous
pression
PP-RCT
Paramètre UM Valeurs requises Paramètres d'essai Méthode d'essai
Stabilité ther- h >8760 = 2,3 Mpa T = 110 C EN ISO 1167
mique moyen-
nant essais sous
pression
PPR et PP-RP
Valeurs
UM Paramètres d'essai Méthode d'essai
requises
Parfois il peut y avoir plusieurs choix possibles, parce que plusieurs produits
permettent de satisfaire la même application. Les solutions proposées par NU-
PIGECO s'adaptent aux valeurs de pression et aux caractéristiques du liquide
à transporter, ce qui permet de réaliser des gros projets (aéroports, centres
commerciaux, installations de climatisation complexes) aussi bien que les ins-
tallations thermohydrauliques domestiques les plus courantes.
Appareils de réglage
thermique centralisé
Installations dans des gros
complexes civils et indus-
triels, commerciaux ou ré-
sidentiels, qui requièrent la
distribution verticale des ca-
nalisations de transport du
fluide.
LOCAUX TECHNIQUES DE
POMPAGE
Tuyaux et raccords de classe 1,
servant les typologies méca-
niques sélectionnées (qui tou-
tefois doivent être conçues en
RESPECTANT LES CLASSES DE
PRESSION DU SYSTÈME PPR):
pompes centrifuges, pompes
multi étages, pompes à rotor
noyé, pompes tournantes ou-
vertes, pompes magnétofluido-
dynamiques, pompes axiales,
pompes à bélier hydraulique,
pompes fluidodynamiques li-
néaires.
Réalisation d'installations sur des UNITÉS NAVIGANTES telles que bateaux à passagers,
navires à moteur, bateaux de croisière, transbordeurs, navires pétroliers, navires
marchands, navires porte-conteneurs et embarcations de plaisance.
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
NORMES ET CERTIFICATS
Pour sauvegarder la santé des utilisateurs,
le système est absolument non toxique et
répond totalement aux normes hygiénico-
sanitaires en vigueur.
Elles sont également conformes à la cir
culaire du Ministère italien de la Santé n. 174
du 06.04.2004.
30
Aujourd'hui les systèmes de canalisations en PPR - FIBRE
DE VERRE résolvent de plus en plus souvent les problèmes
qui caractérisent les installations métalliques, grâce aux
propriétés suivantes :
DE DI Ép. w DE DI Ép. w
DN DN
mm mm mm kg/m mm mm mm kg/m
16 17,2 12,6 2,3 0,90 16
20 21,3 14,70 3,3 1,29 20
25 26,9 18,30 4,3 1,66 25
32 33,7 23,10 5,3 2,57 32
40 42,4 29,80 6,3 3,31 40
50 48,3 33,70 7,3 3,81 50
63 60,3 43,70 8,3 5,40 63 60,3 54,50 2,9 4,11
75 76,1 57,50 9,3 6,93 75 76,1 70,30 2,9 5,24
90 88,9 68,30 10,3 9,03 90 88,9 83,10 2,9 6,15
110 114,3 91,70 11,3 13,00 110 114,3 107,90 3,2 8,77
125 139,7 115,10 12,3 17,30 125 139,7 132,50 3,6 12,10
160 165,1 138,50 13,3 20,80 160 168,3 160,30 4,0 16,20
200 200 219,1 209,10 5,0 26,40
250 250 273 261,80 5,6 36,90
315 315 323,9 312,10 5,9 46,30
DN = DIAMÈTRE NOMINAL
355 355 355,6 343,00 6,3 54,30
400 400 406,4 393,80 6,3 62,20 DE = DIAMÈTRE EXTERNE
450 450 457 444,40 6,3 70,00 DI = DIAMÈTRE INTERNE
500 500 508 495,40 6,3 77,90 Ép. = ÉPAISSEUR
560 560 W = POIDS
630 630 610 595,80 7,1 123,00
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
10
0.1 1 10 100
Épaisseur de la couche de EVALTM (μm)
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
armatures en béton:
5 – 15
structures suspendues
armatures en béton:
0,2 – 2
structures immergées
On sait que l'imposition de déformations plastiques à froid convenables permet d'augmenter cer-
taines caractéristiques mécaniques telles que la dureté et la limite d'élasticité des matériaux. Suite à
ces traitements, toutefois, il arrive également que des diminutions de la résistance du matériau se vé-
rifient. Il existe plusieurs raisons pour cela: au niveau thermodynamique il est probable qu'il y ait une
influence sur l'activité des atomes qui constituent le matériau métallique (un aspect, celui-ci, qui n'a
pas encore été bien éclairci), tandis qu'au niveau cinétique il est raisonnable d'imaginer l'effet d'une
densité plus élevée de défauts réticulaires, ainsi que de textures cristallographiques et, en définitive,
d'une plus grande inhomogénéité microstructurelle. Dans le cas de matériaux ayant un comporte-
ment actif-passif, il est également probable que les couches de protection superficielles soient moins
compactes et plus défectueuses, et donc moins en mesure d'exercer leur action de protection. Les
sollicitations mécaniques dues à des charges externes ou encore relatives à des états d'autotension
diminuent ultérieurement la résistance à la corrosion des matériaux. L'action combinée d'une ten-
sion imposée au matériau dans un milieu corrosif est très souvent beaucoup plus nuisible que l'en-
dommagement provoqué par les deux causes séparées. Dans de telles circonstances, en effet, il peut
facilement arriver que des phénomènes interviennent tels que la corrosion sous contrainte (Stress
Corrosion Cracking, S.C.C.), la rupture différée (Hydrogen Stress Cracking) et la fatigue corrosion, qui
sont en mesure de causer des endommagements insidieux et intenses aux composants mécaniques
ou structurels.
42
CVCR
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
MAINTIEN DE LA PIGMENTATION
ABSENCE DE RUPTURES
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
La perméation des agents chimiques est très La solution proposée par NUPIGECO est la
faible en raison de l’effet barrière exercé par la canalisation NIRON PLATINUM et la gamme
couche de polymère. relative de raccords. Le tuyau en PPR est pro-
tégé par une barrière en PVDF, qui le protège
À cette action chimique s'ajoute ensuite l'ac- contre les agressions de fluides particulière-
tion mécanique représentée non seulement ment agressifs.
par la pression de fonctionnement interne
mais aussi par l'action de courbements éven- Le PVDF est un technopolymère qui possède
tuels imposés pendant la phase d'installation. des caractéristiques optimales de résistance
chimique aux acides forts et aux agents oxy-
Le module à flexion est une caractéristique dants, de solubilité élevée dans les solvants
du matériau et indique la limite de résistance polaires, de résistance aux rayons ultraviolets
d'un tuyau ayant une épaisseur donnée lors- et un vaste champs d'applicabilité thermique:
qu'il est soumis à flexion. Au cas où on tra- -40° C / 150° C.
vaille déjà aux valeurs limites de la résistance
du matériau, une action agressive ultérieure Le système de tuyauterie qui transporte les
représentée par une agression chimique peut fluides agressifs est ainsi mis en sécurité to-
provoquer une véritable débâcle en termes tale, aussi bien dans les sections linéaires
de résistance mécanique. qu'aux endroits les plus fragiles du réseau,
c'est-à-dire les raccords: courbes, coudes, T.
Il faut tenir compte également de l'effet dû
à l'action du fluide transporté. Si la vitesse L'installation est « chimiquement protégée »
d'écoulement est élevée, cet effet peut en et structurellement améliorée, et le produit
effet aggraver ultérieurement la situation dé- favorise le maintien de tous les avantages des
crite jusqu'à présent, en ajoutant le facteur canalisations en PPR.
« érosion » aux nombreux facteurs déjà cités.
2.1.1 POLYPROPYLÈNE
Le polypropylène utilisé dans le système PPR PIPING SYSTEM de NUPIGECO est un type
particulier de copolymère random, à poids moléculaire élevé.
La structure particulière des molécules e les additifs spéciaux utilisés assurent une
résistance mécanique élevée et une durée prolongée.
Puisqu'il est très léger et facile à travailler, ce matériau est efficacement utilisé pour
produire un système complet permettant une économie des temps d'installation de
30% à 50%, par rapport aux systèmes métalliques traditionnels (en acier et cuivre).
Le système PPR PIPING SYSTEM est utilisé pour le transport d’eau potable, dans les
systèmes de chauffage et pour la réalisation d'installations de réfrigération. Il est de
même utilisé dans les applications industrielles, agricoles et dans les constructions
navales.
La matière première est produite par des industries internationales certifiées et il est
conforme aux exigences organoleptiques les plus importantes concernant le trans-
port d'eau potable et le contact avec les aliments.
Le PP-RCT représente l’évolution des années 2000 du PP-R. Il présente des caractéri-
stiques performatives plus élevées que son prédécesseur le PP-R.
La série du tube nécessaire pour une classe d’application spécifique peut être cal-
culé en fonction de l’effort du projet et la pression de fonctionnement. Les résultats
de ce calcul pour des pressions de fonctionnement de 8 bars et 10 bars sont indi-
qués dans le tableau V.
KIWA (Italie)
DVGW (Allemagne)
AENOR (Espagne)
OVGW (Autriche)
Certif (Portugal)
CSTBat (France)
ATG (Belgique)
WRAS (Royaume-Uni)
RINA (Italie)
Lloyd Register (Royaume-Uni)
Eurofins (France)
2.1.2 PROPRIÉTÉS DU MATÉRIAU
Caractéristiques Méthode d’essai Valeurs à 23 °C Unité de mesure
En Italie, la concentration maximale de chlore libre en eau permise est de 0,2 ppm
PRÉCAUTION GÉNÉRALES POUR TOUS (mg / l).
LES SYSTÈMES DE PLOMBERIE
La température maximale de 70 °C ne doit être dépassée.
Les suivantes sont des mesures con-
seillées pour prévenir la bactérie cau- Le niveau des paramètres est différent selon le pays, c'est pourquoi le système doit
sant la légionellose dans le zones respecter les normes restrictives en matière d'eau potable en vigueur dans le pays
d’approvisionnement d’eau :
où le tuyau sera installé.
- éviter les canalisations avec des tronçons terminaux fermés ;
- déplacer le circuit de recyclage (s’il est présent) au plus près
Le dioxyde de chlore en tant que désinfectant
de l’usager ;
Dans ces dernières années, le dioxyde de chlore a été de plus en plus utilisé en tant
- augmenter périodiquement à 55 °C la température de
refoulement de l’eau (à une température supérieure si cela
que désinfectant dans l’approvisionnement d’eau potable, parce que la réactivité
est requis par les protocoles d’entretien) ; chimique (et donc l’effet de la désinfection) est à peu près trois fois supérieure en
- exposer l’approvisionnement d’eau aux rayons UV en cas de chlore libre.
utilisant des lampes spéciales.
Cette oxydation élevée peut potentiellement endommager le PPR PIPING SYSTEM.
Les suivants sont des traitements
préventifs à utiliser contre la bactérie B) DÉSINFECTION THERMIQUE DE SYSTÈME
dans les installations de climatisation :
La température de lavage est réglée de façon à maintenir une valeur de 70 °C pour
- utilisation de dispositifs spéciaux (séparateurs de gouttes)
au moins 3 minutes dans tous les endroits du réseau de distribution d'eau potable.
dans les tours aéro-réfrigérantes ;
- projeter les tours aéro-réfrigérantes de façon à pouvoir
diriger l’air de refoulement à des prises d’air extérieures ; Il est impératif d'observer les limites maximales d'utilisation prévues par les normes
- nettoyage régulier des systèmes de prévention, afin en vigueur, pour ce qui concerne la température et la pression de service. Ces normes
d’éliminer les substances nourrissantes de la bactérie ; se différencient selon le site d'application et la destination d'usage du bâtiment.
- chloration régulière du réseau, selon les critères et les
paramètres de loi. C) TRAITEMENT UV POUR LA DÉSINFECTION DE SYSTÈMES D'EAU POTABLE
Le rayonnement ultraviolet est une méthode alternative efficace pour la désinfec-
tion de l'eau potable. L'application de la lumière ultraviolette semble assurer une
désinfection plus efficace en proximité du point d'utilisation.
- NORMES D’INSTALLATION
DIN 2000 Directives pour la rédaction et prescriptions concernant la conception
des constructions. Gestion et entretien de l'eau potable dans le système d'approvi-
sionnement.
EN 806 Spécifications pour les installations internes aux bâtiments pour le transport
de l'eau destinée à la consommation humaine.
DIN 1988 Codes de conduite pour les installations d'eau potable (feuille de travail
DVGW).
DIN 4109 Norme pour l'élimination du bruit dans le domaine de l'ingénierie struc-
turale.
DIN 16962 Raccords, joints et éléments pour polypropylène (PP) - conduites for-
cées.
DVS 2207 Soudage des matériaux thermoplastiques.
DVS 2208 Soudeuses et dispositifs de soudage des matériaux thermoplastiques.
DIN 18381 Procédures allemandes pour les marchés de bâtiment (VOB) - Section
C : spécifications techniques générales pour les marchés de bâtiment (ATV) - Instal-
lation de canalisations du gaz, de l'eau et d'écoulement à l'intérieur des bâtiments.
DIN 16928 Tuyaux en matériau thermoplastique. Tuyaux, joints, éléments pour
tuyaux, pose : indications générales.
Cette procédure est requise par la norme réglant le Système de Qualité (UNI EN
ISO 9001) ainsi que par les protocoles de contrôle de la qualité des systèmes de
canalisations destinés aux applications pour le transport d’eau dans les bâtiments
(UNI EN ISO 15874, ASTM F2389 etc.).
CONTRÔLE INTERNE
Un personnel qualifié garantit l'exécution de toutes les évaluations selon les règle-
ments, ainsi que l'observance de toutes le préparations techniques en conformité
à la politique de la qualité.
INSPECTION ET ESSAIS
Le plan de qualité adopté par NUPIGECO requiert que les inspections et les essais
soient effectués avant et après le processus de fabrication.
Pendant la phase de fabrication, le plan de qualité fixe les critères de réussite des
essais suivants :
- contrôle dimensionnel ;
- superficie ;
- marquage ;
- contrôle des paramètres de processus.
Les échantillons sont collectés et envoyés au service de qualité, qui effectue les
contrôles de produit et les tests d'évaluation des prestations et qui soumet les
échantillons à différents types et degrés de stress (pression, température, oxydation
etc.).
Tous les résultats des essais sont documentés dans le rapport d'essai ainsi que dans
le certificat 3.1 (disponible sur demande).
Ensuite, il est effectué ce qui suit (sur des lots à tester par sondage):
- cycles thermiques: les tuyaux et les raccords sont soumis à des cycles de tem-
pérature de 15 minutes à 95 °C et 15 minutes à 20 °C, à une pression de 10 bar
pour un total de 5.000 cycles;
- temps d'induction à l'oxydation: détermination du pourcentage d'antioxydants
dans le produit après extrusion;
- stabilité thermique à 110 °C pendant 8.760 h (= 1 année).
STOCKAGE / EMBALLAGE / ENVOI
Après la réussite des susdits essais, les produits sont confectionnés et stockés dans
des entrepôts prévus à cet effet.
Les résultats sont confirmés dans les certificats obtenus par NUPI-
GECO.
Légende
X1 temps, t1, lorsque la fracture est atteinte, en heures
X2 temps, t2, lorsque la fracture est atteinte, en années
Y contrainte circonférencielle, σ, en mégapascal
Légende
X1 temps, t1, lorsque la fracture est atteinte, en heures
X2 temps, t2, lorsque la fracture est atteinte, en années
Y contrainte circonférencielle, σ, en mégapascal
DE SDR 6 - S 2,5 - MONOCOUCHE SDR 7,4 - S 3,2 - MONOCOUCHE SDR 7,4 - S 3,2 - MULTICOUCHE SDR 9 - S 4 - MONOCOUCHE
In mm kWh/m kJ/m kWh/m kJ/m kWh/m kJ/m kWh/m kJ/m
16 1,41 5060,00
1/2” 20 2,20 7912,00 2,05 7360,00
3/4” 25 3,40 12236,00 2,94 10580,00 3,20 11500,00
1” 32 5,56 19964,00 4,74 17020,00 5,12 18400,00 3,94 14167,12
1 1/4” 40 8,59 30866,00 7,30 26220,00 7,81 28060,00 6,19 22233,80
1 1/2” 50 13,31 47840,00 11,26 40480,00 12,03 43240,00 9,50 34128,28
2” 63 20,74 74520,00 17,79 63940,00 19,07 68540,00 14,97 53810,22
2 1/2” 75 29,31 105340,00 25,47 91540,00 27,01 97060,00 21,16 76050,48
3” 90 42,24 151800,00 36,22 130180,00 38,53 138460,00 30,52 109690,11
4” 110 62,98 226320,00 54,40 195500,00 57,22 205620,00 45,36 163014,26
125 80,64 289800,00 69,25 248860,00 73,60 264500,00 58,67 210840,40
6” 160 112,51 404340,00 119,17 428260,00 95,49 343165,06
8” 200 180,48 648600,00 192,06 690230,00 148,10 532234,45
250 282,88 1016600,00 300,42 1079620,00 229,85 826032,43
10” 315 464,64 1669800,00 363,05 1304703,58
355 588,80 2116000,00 460,15 1653671,74
16” 400 582,44 2093138,03
450
20” 500
560
24” 630
Le produit de la dégradation thermique est moins toxique que celui qui est émis par
d'autre types de combustion (par exemple celle du bois) dans les mêmes circons-
tances.
L'indice d'oxygène du PPR utilisé par NUPIGECO, sans rétardeur de flamme, est de
18% (essai en conformité à ASTM D 2683 /ISO 4589).
La valeur calorifique inferieur du matériau est d’environ 46.000 kJ/kg ou 12,8 kWh/
kg, comparable à celle du fuel-oil.
Le tableau qui contient les données de combustion à la page 66 est basé sur la
valeur du pouvoir calorifique inférieur du matériau (en kWh/kg ou kJ/kg) et sur la
masse du tuyau (en kg/m).
SYSTÈMES D’ASSEMBLAGE
3.1 ÉQUIPEMENTS DE SOUDAGE
Une installation rapide et efficiente du système de canalisations en PPR PIPING SYSTEM
exige la disponibilité des équipements prévus par les lignes directrices DVS2207:
1) Le polyfuseur 800 W - 220V CA - 50Hz, modèle 00NSBEP, fourni dans une valise
transportable et complet avec les paires de matrices nécessaires pour le soudage
des diamètres 20 - 25 - 32. Le polyfuseur est doté d'un thermostat automatique
pour maintenir la température de la matrice constamment à 260 ± 10 °C. Les
versions avec un voltage de 110V ou 48V sont disponibles sur demande.
2) Le polyfuseur sur roues (1400 W - 220 V CA - 50 Hz), modèle 00STL125, est fourni
sur palette complet avec l'équipement de série comprenant: matrices du dia-
mètre 25 au diamètre 125 et support pour le tuyau.
Équipements Code Puissance 16 20 25 32 40 50 63 75 90 110 125 160 200 250 315 355 400 450 500 560 630
00S10160 2500W X X X X X X X X
00S10250 3050W X X X X X X X X
00S10315 3800W X X X X X X X X X
00E8500 2500W X X X X X X X X X X X X X X
00E9001 2500W X X X X X X X X X X X X X X X X X X X X
230V 230V
Alimentation 50 / 60 Hz 50 / 60 Hz
(TE) (TE)
TFE : 260°C (±1°)
Température de service
TE : 180 ÷ 290°C
Température ambiante -5 ÷ +40°C
Matériau PEHD, PP, PP-R, PB, PVDF
0 Max Dimensions
Modèles Puissance Poids
diamètre (L x P x H)
00NSBEP63 63 mm 800 W 115 x 50 x 320 mm 1,44 kg
00NPCCE 63 mm 800 W 175 x 50 x 360 mm 1,82 kg
00NPCCE125 125 mm 1400 W 115 x 50 x 396 mm 3,16 kg
Dimensions (L x P x H) et poids
Machine 1080 x 840 x 580 mm
Valise transportable 1500 x 800 x 1300 mm
Poids 100 kg
1
Dn
03NGS6320 A 63/25x20 63 20 25
D1
Dn2
03NGS6325 A 63/25x25 63 25 25
03NGS6332 A 63/32x32 63 32 32
03NGS7520 A 75/25x20 75 20 25
03NGS7525 A 75/25x25 75 25 25 Type B
03NGS7532 A 75/32x32 75 32 32
03NGS9020 A 90/25x20 90 20 25
03NGS9025 A 90/25x25 90 25 25
03NGS9032 A 90/32x32 90 32 32
1
Dn
03NGS11020 A 110/25x20 110 20 25
03NGS11025 A 110/25x25 110 25 25
D1
Dn2
03NGS11032 A 110/32x32 110 32 32
03NGS12563 B 125/63x63 125 63 63
03NGS16040 B 160/40x40 160 40 40
03NGS16063 B 160/63x63 160 63 63
TEMPS DE SOUDAGE
VOLTAGE DE SOUDAGE
TEMPS DE REFROIDISSEMENT
CODE ARTICLE
CODE À BARRES
ILE
-SIM POUR SOUDAGE
FAC
IMPORTANT
Pour une utilisation correcte de la soudeuse, consulter le manuel d’utilisation de l'appareil.
ATTENTION!
Vérifier toujours les paramètres de soudage avant de lancer le cycle de soudage.
ATTENTION!!
Chaque fabricant de machines pour soudage BOUT À BOUT publie sa propre documentation de référence sur la base des paramètres de service des équipements
qu'il produit, à laquelle IL EST OBLIGATOIRE DE SE RAPPORTER pour tout détail qui ne soit pas expressément déclaré et, en tout cas, pour toute référence
concernant les machines.
Légende
1 Phase 1: Rapprochement et
préchauffage
2 Phase 2: Chauffage
3 Phase 3: Enlèvement du
thermoélément
Pressions
4 Phase 4: Atteinte de la
pression de soudage
5 Phase 5: Soudage
6 Phase 6: Refroidissement
Temps
PHASES DE SOUDAGE
Phase 1: Rapprochement et préchauffage
Phase 5: Soudage
DONNÉES TECHNIQUES
4.1 PROPRIÉTÉS CHIMIQUES, PHYSIQUES
ET MÉCANIQUES DU PPR
Coefficient de dilatation
VDE 0304 1,5 x 10-4 K-1
thermique linéaire
Résistance au choc
(Charpy) +23°C ISO 179/1 e A aucune rupture KJ/m2
- TUYAUX MONOCOUCHE
- TUYAUX MULTICOUCHE
Ils sont calculés et dimensionnés pour répondre parfaitement à toutes les exigences
quel que soit le type d’installation.
20 X σ
PN =
SDR - 1
où:
PN Pression Nominale (bar)
σ Contrainte circonférencielle du PPR (MPa)
SDR (Standard Dimension Ratio) Rapport Diamètre/Épaisseur
60 25
20 14
Suivis de
Systèmes de chauffage
5 60 25 10 90 1 100 100
à haute température
Suivis de
80 10
Remarque n° 1 : pour une même classe, si plusieurs températures de fonctionnement sont mentionnées, les temps doivent être ajustés.
Par exemple, la température de fonctionnement déterminée pour 50 ans pour une classe 2 est : 70° C pour 49 ans, ajustée avec 80° C pour 1 an et 95° C pour 100 heures.
Remarque n°2 : pour des valeurs Toper (température de fonctionnement), Tmax (température de fonctionnement maximale) et Tmal (température en cas de mauvais fonctionnement) supérieures à celles mentionnées dans
le tableau, ces standards ne sont pas applicables.
∆L= α L ∆T
Unité de
Symbole Description Valeur
mesure
ΔL dilatation thermique linéaire mm millimètres
coefficient d'expansion
millimètres par mètre kel-
α thermique linéaire du tuyau PPR 0,15 mm/mK
vin
monocouche
coefficient d'expansion
millimètres par mètre kel-
α(FG) thermique linéaire du tuyau PPR 0,035 mm/mK
vin
contenant fibre de verre
L longueur de la canalisation m mètres
différence entre la température
ΔT de pose et la température du K degrés Kelvin
liquide transporté
- La dilatation n’exerce pas la force nécessaire pour détacher les carreaux et/ou cas-
ser l’enduit.
∆T = T fluide - T pose
10 K 20 K 30 K 40 K 50 K 60 K 70 K 80 K
L (m) ΔL (mm)
1 1,5 3,0 4,5 6,0 7,5 9,0 10,5 12,0
2 3,0 6,0 9,0 12,0 15,0 18,0 21,0 24,0
3 4,5 9,0 13,5 18,0 22,5 27,0 31,5 36,0
4 6,0 12,0 18,0 24,0 30,0 36,0 42,0 48,0
8 12,0 24,0 36,0 48,0 60,0 72,0 84,0 96,0
12 18,0 36,0 54,0 72,0 90,0 108,0 126,0 144,0
16 24,0 48,0 72,0 96,0 120,0 144,0 168,0 192,0
20 30,0 60,0 90,0 120,0 150,0 180,0 210,0 240,0
24 36,0 72,0 108,0 144,0 180,0 216,0 252,0 288,0
28 42,0 84,0 126,0 168,0 210,0 252,0 294,0 336,0
32 48,0 96,0 144,0 192,0 240,0 288,0 336,0 384,0
36 54,0 108,0 162,0 216,0 270,0 324,0 378,0 432,0
40 60,0 120,0 180,0 240,0 300,0 360,0 420,0 480,0
44 66,0 132,0 198,0 264,0 330,0 396,0 462,0 528,0
48 72,0 144,0 216,0 288,0 360,0 432,0 504,0 576,0
52 78,0 156,0 234,0 312,0 390,0 468,0 546,0 624,0
10 K
600
20 K
500
DILATATION THERMIQUE LINÉAIRE
30 K
400 40 K
(mm)
50 K
300
60 K
200 70 K
80 K
100
0
1 2 3 4 8 12 16 20 24 28 32 36 40 44 48 52
LONGUEUR DU TUYAU (m)
140
20 K
120
30 K
DILATATION THERMIQUE LINÉAIRE
100
40 K
80
50 K
(mm)
60
60 K
40 70 K
20 80 K
0
1 2 3 4 8 12 16 20 24 28 32 36 40 44 48 52
LONGUEUR DU TUYAU (m)
FIGURE B.1 - POSITIONNEMENT DES POINTS D’ANCRAGE (INSTALLATION AVEC DES RAMIFICATIONS)
LB = C × √de × ΔL
où:
LB est la longueur du compensateur en millimètres;
C est la constante de la matière, conformément au tableau B.4;
de est le diamètre extérieur en millimètres;
ΔL est la variation thermique en longueur déterminée par la formule B.1 en milli-
mètres.
TABLEAU B.4 - VALEURS DE LA CONSTANTE DU MATÉRIEL C
Matériau C
PE 27
PE-X 12
PP 20
PB 10
PE-RT 14
LB = C × √de × 2 x ΔL = 2 x l1 + l2
2
où:
LB est la longueur du compensateur en millimètres;
C est la constante du matériau;
de est le diamètre extérieur en millimètres;
ΔL est la dilatation thermique linéaire en millimètres;
l1 est la longueur du compensateur de dilatation en millimètres;
l2 est la largeur du compensateur de dilatation.
Légende
1 Support continu
L1 Distance entre colliers de guidage de support ou entre collier de guidage de
support et point d’ancrage
L2 Distance entre les fixations
Les distances maximales entre les colliers de guidage et les fixations sont présentées
dans les tableaux B.5 et B.6.
L1
Ø Extérieur du tuyau mm
mm
Eau froide Eau chaude
≤ 20 1.500 1.000
L2
Ø Extérieur du tuyau mm
mm
Eau froide Eau chaude
≤ 20 500 200
Pour les tuyaux verticaux la valeur L1 doit être multipliée par 1,3.
FIGURE B.9 - INSTALLATION ENTRE LES POINTS D’ANCRAGE AU MOYEN DE COLLIERS DE GUIDAGE
Légende
L1 Distance entre colliers de guidage ou entre collier de guidage et
point d’ancrage
o Point d’ancrage
L1
Ø Extérieur du tuyau mm
mm
Eau froide Eau chaude
≤ 16 750 400
> 16 to ≤ 20 800 500
> 20 to ≤ 25 850 600
> 25 to ≤ 32 1.000 650
> 32 to ≤ 40 1.100 800
> 40 to ≤ 50 1.250 1.000
> 50 to ≤ 63 1.400 1.200
> 63 to ≤ 75 1.500 1.300
> 75 to ≤ 90 1.650 1.450
> 90 to ≤ 110 1.900 1.600
* > 110 to ≤ 160 2.000 1.400
* > 160 to ≤ 200 2.300 1.800
* > 200 to ≤ 250 2.500 2.000
* Ces diamètres ne sont pas présents dans la norme UNI EN806-4
Les distances maximales entre les points d’ancrage et les colliers de guidage repré-
sentés dans la figure B.9 doit être en conformité avec le tableau B.8.
Ce type d’installation peut être utilisé s’il peut être toléré, et/ou si le mouvement
causé par la dilatation thermique est visuellement acceptable comme le montre la
figure B.10.
FIGURE B.10 - TUYAUX SUPPORTÉS UNIQUEMENT PAR DES POINTS D’ANCRAGE
Légende
o Point d’ancrage
5 3,7 3,9 4,1 4,3 4,6 4,8 5,0 5,3 5,5 5 2,8 3,1 3,4 3,7 4,0 4,2 4,5 4,8 5,1
7 3,0 3,3 3,5 3,8 4,0 4,2 4,5 4,7 5,0 60 7 2,1 2,4 2,7 3,0 3,3 3,6 3,8 4,1 4,4 60
9 2,4 2,7 2,9 3,2 3,4 3,7 3,9 4,2 4,4 9 1,4 1,7 2,0 2,3 2,6 2,9 3,2 3,5 3,8
5 10,5 10,9 11,3 11,7 12,1 12,4 12,8 13,2 13,6 5 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 15,5
7 9,5 9,9 10,3 10,7 11,1 11,5 11,9 12,3 12,7 80 7 10,1 10,6 11,2 11,7 12,2 12,7 13,2 13,8 14,3 80
9 8,4 8,8 9,2 9,6 10,0 10,5 10,9 11,3 11,7 9 8,7 9,2 9,8 10,3 10,9 11,4 12,0 12,5 13,1
5 3,6 3,8 4,1 4,3 4,6 4,8 5,1 5,3 5,6 5 2,3 2,6 2,9 3,2 3,5 3,8 4,1 4,4 4,7
7 3,0 3,2 3,5 3,7 4,0 4,2 4,5 4,8 5,0 60 7 1,6 1,9 2,2 2,5 2,8 3,1 3,4 3,7 4,0 60
9 2,3 2,6 2,9 3,1 3,4 3,7 3,9 4,2 4,4 9 0,9 1,2 1,5 1,8 2,1 2,4 2,7 3,0 3,3
5 10,9 11,3 11,7 12,1 12,5 12,9 13,3 13,7 14,1 5 11,1 11,6 12,1 12,6 13,1 13,6 14,1 14,6 15,1
7 9,7 10,2 10,6 11,0 11,4 11,9 12,3 12,7 13,1 80 7 9,7 10,2 10,7 11,2 11,7 12,2 12,7 13,2 13,7 80
9 8,6 9,0 9,5 9,9 10,3 10,8 11,2 11,7 12,1 9 8,2 8,8 9,4 10,0 10,6 11,2 11,8 12,4 13,0
5 3,5 3,8 4,0 4,3 4,5 4,8 5,0 5,3 5,5 5 1,8 2,1 2,4 2,7 3,0 3,3 3,6 3,9 4,2
7 2,9 3,1 3,4 3,6 3,9 4,2 4,4 4,7 5,0 60 7 1,1 1,5 1,7 2,0 2,3 2,6 2,9 3,2 3,5 60
9 2,2 2,5 2,7 3,0 3,3 3,6 3,8 4,1 4,4 9 0,3 0,6 0,9 1,2 1,5 1,8 2,1 2,4 2,7
5 11,1 11,6 12,0 12,4 12,9 13,3 13,7 14,1 14,6 5 10,8 11,4 11,9 12,5 13,0 13,6 14,1 14,7 15,2
7 10,0 10,4 10,9 11,3 11,8 12,2 12,7 13,1 13,5 80 7 9,4 10,0 10,5 11,1 11,6 12,2 12,7 13,3 13,8 80
9 8,7 9,2 9,7 10,1 10,6 11,1 11,6 12,0 12,5 9 7,9 8,5 9,0 9,6 10,1 10,7 11,2 11,8 12,3
5 3,4 3,6 3,9 4,4 4,7 4,9 4,9 5,2 5,5 5 1,3 1,6 1,9 2,2 2,5 2,8 3,1 3,4 3,7
7 2,7 3,0 3,2 3,8 4,1 4,3 4,3 4,6 4,9 60 7 0,5 0,8 1,1 1,4 1,7 2,0 2,3 2,6 2,9 60
9 2,0 2,3 2,6 3,1 3,4 3,7 3,7 4,0 4,3 9 0,0 0,1 0,4 0,7 1,0 1,3 1,6 1,9 2,2
5 11,3 11,8 12,3 13,2 13,6 14,1 14,1 14,5 15,0 5 10,5 11,1 11,6 12,2 12,7 13,3 13,8 14,4 14,9
7 10,1 10,6 11,0 13,0 12,5 12,9 12,9 13,4 13,9 80 7 9,0 9,6 10,1 10,7 11,2 11,8 12,3 12,9 13,4 80
9 8,8 9,3 9,8 10,8 11,3 11,8 11,8 12,3 12,8 9 7,5 8,1 8,7 9,3 9,9 10,5 11,1 11,7 12,3
5 3,1 3,4 3,7 4,0 4,2 4,5 4,8 5,0 5,3 5 0,8 1,1 1,4 1,7 2,0 2,3 2,6 2,9 3,2
7 2,4 2,7 3,0 3,3 3,6 3,8 4,1 4,4 4,7 60 7 0,0 0,3 0,6 0,9 1,2 1,5 1,8 2,1 2,4 60
9 1,7 2,0 2,3 2,6 2,9 3,2 3,5 3,8 4,1 9 0,0 0,0 0,0 0,2 0,5 0,8 1,1 1,4 1,7
5 11,5 11,9 12,4 12,9 13,4 13,8 14,3 14,8 15,3 5 10,2 10,8 11,3 11,9 12,4 13,0 13,5 14,1 14,6
7 10,1 10,6 11,1 11,6 12,1 12,6 13,1 13,6 14,1 80 7 8,6 9,2 9,8 10,4 11,0 11,6 12,2 12,8 13,4 80
9 8,8 9,3 9,8 10,4 10,9 11,4 11,9 12,4 13,0 9 7,1 7,7 8,3 8,9 9,5 10,1 10,7 11,3 11,9
5 3,8 4,0 4,3 4,5 4,7 5,0 5,2 5,4 5,6 5 2,6 2,9 3,2 3,5 3,8 4,1 4,4 4,7 5
7 3,2 3,5 3,7 4,0 4,2 4,5 4,7 5,0 5,2 60 7 1,9 2,2 2,5 2,8 3,1 3,4 3,7 4 4,3 60
9 2,6 2,9 3,1 3,4 3,6 3,9 4,1 4,4 4,6 9 1,1 1,4 1,7 2,1 2,4 2,7 3 3,3 3,6
5 10,6 11,0 11,4 11,8 12,2 12,6 13,0 13,4 13,8 5 11,8 12,3 12,9 13,4 13,9 14,5 15 15,6 16,1
7 9,6 10,0 10,4 10,8 11,2 11,6 12,0 12,4 12,8 80 7 10,3 10,9 11,4 12 12,6 13,1 13,7 14,2 14,8 80
9 8,5 8,9 9,3 9,7 10,1 10,5 10,9 11,3 11,7 9 8,8 9,4 10 10,6 11,1 11,7 12,3 12,9 13,5
5 3,8 4,0 4,3 4,5 4,7 5,0 5,2 5,4 5,7 5 2,3 2,6 2,9 3,2 3,5 3,8 4,1 4,4 4,6
7 3,2 3,5 3,7 4,0 4,2 4,5 4,7 5,0 5,2 60 7 1,5 1,9 2,2 2,5 2,8 3,1 3,4 3,7 4 60
9 2,5 2,8 3,1 3,4 3,6 3,9 4,1 4,4 4,6 9 0,8 1,1 1,4 1,7 2,1 2,4 2,7 3 3,3
5 10,9 11,3 11,7 12,1 12,5 12,9 13,3 13,7 14,1 5 11,5 12,2 12,8 13,4 13,9 14,5 15,1 15,6 16,2
7 9,8 10,3 10,7 11,2 11,6 12,1 12,5 13,0 13,4 80 7 10 10,7 11,3 11,9 12,5 13,1 13,7 14,3 14,8 80
9 8,7 9,2 9,6 10,1 10,5 11,0 11,4 11,9 12,3 9 8,5 9,2 9,8 10,5 11,1 11,7 12,3 12,9 13,5
5 3,8 4 4,3 4,5 4,7 5 5,2 5,4 5,7 5 2,2 2,5 2,8 3,1 3,4 3,7 4,0 4,3 4,5
7 3,1 3,4 3,6 3,9 4,1 4,4 4,6 4,9 5,1 60 7 1,4 1,8 2,1 2,4 2,7 3,0 3,3 3,6 3,9 0,6
9 2,4 2,7 3 3,3 3,5 3,8 4 4,3 4,6 9 0,6 1,0 1,3 1,6 2,0 2,3 2,6 2,8 3,1
5 11,3 11,8 12,2 12,7 13,1 13,6 14,0 14,5 14,9 5 11,3 12,0 12,6 13,2 13,7 14,3 15,0 15,5 16,0
7 10,2 10,7 11,1 11,6 12,0 12,5 12,9 13,4 13,8 80 7 9,8 10,5 11,1 11,7 12,3 13,0 13,5 14,0 14,5 0,8
9 8,9 9,4 9,9 10,4 10,9 11,4 11,9 12,4 12,9 9 8,3 9,0 9,7 10,3 11,0 11,5 12,0 12,8 13,2
5 3,6 3,9 4,1 4,4 4,6 4,9 5,1 5,4 5,6 5 0,8 1,1 1,4 1,7 2,0 2,3 2,6 2,9 3,2
7 2,9 3,2 3,4 3,7 4,0 4,3 4,5 4,8 5,1 60 7 0,0 0,4 0,7 1,0 1,3 1,6 1,9 2,2 2,5 60
9 2,2 2,5 2,8 3,1 3,4 3,7 3,9 4,2 4,5 9 0,0 0,0 0,0 0,3 0,6 0,9 1,2 1,5 1,8
5 11,5 12,0 12,4 12,9 13,4 13,9 14,3 14,8 15,3 5 10,5 11,1 11,7 12,3 12,9 13,5 14,1 14,7 15,3
7 10,3 10,8 11,2 11,7 12,1 12,6 13,0 13,5 13,9 80 7 8,9 9,5 10,1 10,7 11,3 11,9 12,5 13,1 13,7 80
9 9,0 9,5 10,0 10,5 11,0 11,5 12,0 12,5 13,0 9 7,2 7,9 8,5 9,2 9,8 10,5 11,1 11,8 12,4
5 3,5 3,8 4,0 4,3 4,5 4,8 5,1 5,3 5,6 5 1,7 2,0 2,3 2,6 2,9 3,2 3,5 3,8 4,1
7 2,7 3,0 3,2 3,5 3,8 4,1 4,3 4,6 4,9 60 7 0,9 1,2 1,5 1,8 2,1 2,4 2,7 3,0 3,3 60
9 2,0 2,3 2,6 2,9 3,2 3,5 3,7 4,0 4,3 9 0,1 0,4 0,8 1,1 1,4 1,7 2,0 2,3 2,6
5 11,7 12,2 12,7 13,2 13,7 14,2 14,7 15,2 15,7 5 11,5 12,2 12,8 13,5 14,1 14,7 15,3 16,0 16,6
7 10,4 10,9 11,4 11,9 12,4 12,9 13,4 13,9 14,4 80 7 9,9 10,6 11,3 11,9 12,5 13,1 13,8 14,5 15,1 80
9 9,0 9,5 10,1 10,6 11,2 11,7 12,2 12,8 13,3 9 8,2 8,9 9,6 10,3 11,0 11,7 12,3 13,0 13,6
5 3,2 3,5 3,8 4,0 4,3 4,6 4,9 5,2 5,4 5 1,7 2,0 2,3 2,6 2,9 3,2 3,5 3,8 4,1
7 2,5 2,8 3,1 3,4 3,7 4,0 4,2 4,5 4,8 60 7 0,9 1,2 1,5 1,8 2,1 2,4 2,7 3,0 3,3 60
9 1,7 2 2,3 2,6 2,9 3,2 3,5 3,8 4,1 9 0,1 0,4 0,8 1,1 1,4 1,7 2,0 2,3 2,6
5 11,8 12,3 12,8 13,3 13,8 14,3 14,8 15,3 15,8 5 11,5 12,2 12,8 13,5 14,1 14,7 15,3 16,0 16,6
7 10,4 11,0 11,5 12,1 12,6 13,2 13,7 14,3 14,8 80 7 9,9 10,6 11,3 11,9 12,5 13,1 13,8 14,5 15,1 80
9 9,0 9,6 10,1 10,7 11,2 11,8 12,4 12,9 13,5 9 8,2 8,9 9,6 10,3 11,0 11,7 12,3 13,0 13,6
Conductivité thermique
utile de l'isolant
110
125
160
200
250
315
355
400
450
500
560
630
20
25
32
40
50
63
75
W/m°C 90
0,030 13 19 26 33 37 40
0,032 14 21 29 36 40 44
0,034 15 23 31 39 44 48
0,036 17 25 34 43 47 52
0,038 18 28 37 46 51 56
0,040 20 30 40 50 55 60
0,042 22 32 43 54 59 64
0,044 24 35 46 58 63 69
0,046 26 38 50 62 68 74
0,048 28 41 54 66 72 79
0,050 30 44 58 71 77 84
REMARQUES
- Pour des valeurs de conductivité thermique utile de l'isolant différentes par rapports à celles qui sont indiquées dans le tableau, les valeurs minimales
d'épaisseur du matériau isolant sont extraites par interpolation linéaire des données indiquées dans le tableau.
- Les montants verticaux des canalisations doivent être situés en deçà de l'isolation thermique du bâtiment vers son intérieur et les épaisseurs minimales
correspondantes de l'isolation qui se trouvent dans le tableau doivent être multipliées par 0,5.
- Pour les canalisations qui se trouvent à l'intérieur de structures n'ayant pas de contact avec l'extérieur ou avec de locaux non chauffés, les épaisseurs indiquées
dans le tableau doivent être multipliées par 0,3.
- Les voies d'air chaud pour la climatisation hivernal situées dans des environnements non chauffés doivent être isolées avec une épaisseur d'isolant qui ne
doit pas être inférieure aux épaisseurs indiquées dans le tableau pour canalisations avec un diamètre extérieur de 20 à 39mm.
Débit Ø Ø Ø Ø Ø Ø Ø Débit Ø Ø Ø Ø Ø Ø Ø Ø
l/s kg/h 16x2,7 20x3,4 25x4,2 32x5,4 40x6,7 50x8,4 63x10,5 l/s kg/h 32x5,4 40x6,7 50x8,4 63x10,5 75x10,5 90x12,5 110x15,2 125x20,8
10 2 0,9 Perte de charge en mm c.eau/m 143 43 14 7,9 2,8
70 1,0 3.600
0,22 0,14 0,09 Vitesse moyenne en m/s 1,8 1,16 0,73 0,5 0,35
33 8 3 1 198 59 19 9,2 3,9
140 1,2 4.320
0,44 0,29 0,18 0,11 2,16 1,40 0,87 0,61 0,42
52 13 4 2 66 22 10,6 4,5
0,05 180 1,3 4.680
0,57 0,37 0,23 0,14 1,49 0,93 0,66 0,46
73 19 6 2 76 25 12,1 5,1
220 1,4 5.040
0,70 0,45 0,28 0,17 1,62 1,01 0,71 0,50
118 30 10 4 1,5 0,5 114 32 15,3 6,4
290 1,6 5.760
0,92 0,59 0,37 0,23 0,15 0,09 1,85 1,16 0,81 0,57
164 42 15 6 2 0,7 141 40 18,8 7,9
0,1 360 1,8 6.480
1,11 0,71 0,45 0,28 0,18 0,11 2,08 1,32 0,92 0,64
234 61 21 8 3 1,07 0,33 170 48 22,7 9,5 3,7
430 2,0 7.200
1,36 0,88 0,55 0,34 0,22 0,14 0,09 2,31 1,46 1,02 0,71 0,48
83 29 11 4 1,44 0,45 57 26,9 11,3 4,4
510 2,2 7.920
1,04 0,66 0,40 0,26 0,16 0,10 1,60 1,12 0,78 0,52
104 37 14 5 1,8 0,56 66 31,4 13,1 5,1
580 2,4 8.640
1,18 0,75 0,46 0,29 0,19 0,12 1,74 1,22 0,85 0,57
129 45 18 6 2,2 0,7 76 36,1 15,1 5,9 3,1
655 2,6 9.360
1,34 0,84 0,52 0,33 0,21 0,13 1,88 1,32 0,92 0,62 0,48
156 55 22 7,5 2,69 0,84 87 41,2 17,3 6,7 3,6
0,2 730 2,8 10.080
1,49 0,94 0,58 0,37 0,24 0,15 2,02 1,43 0,99 0,67 0,51
290 69 27 9 3,3 1 1113 46,6 19,5 7,5 4,1
830 3,0 10.800
1,65 1,07 0,66 0,42 0,27 0,17 2,17 1,53 1,06 0,71 0,55
353 85 33 11 4,1 1,3 149 61,4 25,7 9,9 5,3
900 3,5 12.600
1,83 1,20 0,74 0,47 0,30 0,19 2,53 1,78 1,24 0,83 0,64
110 43 15 5,3 1,6 77,9 32,6 12,6 6,7
0,3 1.080 4,0 14.400
1,39 0,85 0,54 0,35 0,22 2,04 1,41 0,95 0,73
149 59 20 7,1 2,2 96,2 40,2 15,5 8,3
1.280 4,5 16.200
1,65 1,01 0,64 0,41 0,26 2,29 1,59 1,07 0,82
270 71 24 8 2,7 116,2 48,5 18,7 10,0
0,4 1.430 5,0 18.000
1,85 1,13 0,72 0,46 0,29 2,55 1,77 1,19 0,92
87 30 10 3,4 161,1 67,2 25,9 13,9
1.605 6,0 21.600
1,27 0,81 0,52 0,32 3,06 2,12 1,43 1,10
107 36 13 4,2 88,6 34,2 18,3
0,5 1.805 7,0 25.200
1,43 0,91 0,58 0,36 2,48 1,66 1,28
135 44 15 5 112,7 43,4 23,2
2.005 8,0 28.800
1,55 1,01 0,65 0,40 2,83 1,90 1,46
172 50 17 5,7 139,3 53,6 28,7
0,6 2.155 9 32.400
1,70 1,08 0,69 0,43 3,18 2,14 1,65
200 57 20 6,5 64,8 34,7
2.330 10 36.000
1,8 1,17 0,75 0,47 2,38 1,83
225 66 23 7,6 77 41,1
0,7 2.530 11 39.600
1,98 1,27 0,82 0,51 2,61 2,01
74 26 8,5 90,0 48,1
2.705 12 43.200
1,36 0,87 0,54 2,85 2,20
83 29 9,5 104,0 55,6
0,8 2.880 13 46.800
1,45 0,93 0,58 3,09 2,38
89 31 10 71,9
3.005 15 50.400
1,51 0,97 0,61 2,75
103 36 11 92,1
0,9 3.255 17 54.000
1,63 1,05 0,66 3,11
PERTES DE CHARGE UNITAIRES DES TUYAUX PPR PIPING SYSTEM SDR 11 À UNE TEMPÉRATURE DE L’EAU DE 10°C
Débit Ø Ø
l/s kg/h 200x18,2 250x22,7
1,46 0,50 3,00 1,03 5,02 1,72 21,61 7,38 16,39
10,00 36.000 15,00 54.000 20,00 72.000 45,00 162.000 70,00 18.000
0,48 0,30 0,71 0,46 0,95 0,95 2,14 1,37 2,13
1,73 0,59 3,37 1,16 7,49 2,56 26,14 8,92 18,58
11,00 39.600 16,00 57.600 25,00 90.000 50,00 180.000 75,00 21.600
0,52 0,33 0,76 0,49 1,19 0,76 2,38 1,52 2,28
2,02 0,69 3,75 1,29 10,40 3,56 31,07 10,60 20,88
12,00 43.200 17,00 61.200 30,00 108.000 55,00 12.600 80,00 25.200
0,57 0,36 0,81 0,52 1,43 0,91 2,62 1,67 2,43
2,33 0,80 4,16 1,43 13,73 4,69 12,40 25,86
13,00 46.800 18,00 64.800 35,00 126.000 60,00 14.400 90,00 18.000
0,62 0,40 0,86 0,55 1,66 1,06 1,82 2,74
2,65 0,91 4,58 1,57 17,47 5,97 14,74
14,00 50.400 19,00 68.400 40,00 144.000 66,00 16.200
0,67 0,43 0,90 0,58 1,90 1,22 2,01
Débit Ø Ø Ø Ø Ø Ø Ø Ø Débit Ø Ø Ø Ø Ø Ø
l/s kg/h 20x2,8 25x3,5 32x2,9 40x3,7 50x4,6 63x5,8 75x6,8 90x8,2 l/s kg/h 50x4,6 63x5,8 75x6,8 90x8,2 110x10 125x11,4
48,4 17,0 2,9 38,3 16,4 6,9 2,7
0,10 360 2,80 10.080
0,61 0,39 0,19 1,35 0,9 0,7 0,4
96,8 33,8 6,5 43,3 18,5 7,8 3,0 1,6
0,15 540 3,00 10.800
0,92 0,59 0,30 Perte de charge en mm c.eau/m 1,45 1,01 0,71 0,47 0,37
159,0 55,4 9,4 Vitesse moyenne en m/s 57,0 24,4 10,3 3,9 2,1
0,20 720 3,50 12.600
1,23 0,79 0,37 1,69 1,18 0,82 0,55 0,43
13,8 72,2 30,9 13,0 5,0 2,7
0,25 864 4,00 14.400
0,46 1,93 1,4 0,9 0,6 0,5
321,6 111,6 18,9 6,7 38,1 16,0 6,1 3,3
0,30 1.080 4,50 16.200
1,84 1,18 0,56 0,36 1,5 1,1 0,7 0,5
24,7 8,8 46,0 19,3 7,4 4,0
0,35 1.260 5,00 18.000
0,65 0,42 1,69 1,18 0,79 0,61
531,8 184,3 31,1 11,1 3,8 54,5 22,9 8,8 4,8
0,40 1.440 5,50 19.800
2,46 1,57 0,74 0,48 0,31 1,86 1,29 0,86 0,67
38,1 13,6 4,7 63,6 26,7 10,2 5,6
0,45 1.620 6,00 21.600
0,83 0,54 0,34 2,0 1,4 0,9 0,7
787,0 272,3 45,8 16,3 5,6 35,2 13,4 7,3
0,50 1.800 7,00 25.200
3,07 1,96 0,93 0,60 0,38 1,6 1,1 0,9
54,1 19,2 6,6 44,7 17,1 9,3
0,55 1.980 8,00 28.800
1,02 0,66 0,42 1,9 1,3 1,0
375,0 63,0 22,3 7,7 21,1 11,5
0,60 2.160 9,00 32.400
2,36 1,11 0,72 0,46 1,4 1,1
72,1 25,7 8,9 3,0 25,4 13,8
0,65 2.340 10,00 36.000
1,21 0,78 0,50 0,31 1,57 1,22
492,0 82,5 29,2 10,1 3,4 30,1 16,4
0,70 2.520 11,00 39.600
2,75 1,30 0,84 0,54 0,34 1,73 1,34
93,1 33,0 11,4 3,8 35,2 19,2
0,75 2.700 12,00 43.200
1,39 0,90 0,36 0,57 1,89 1,46
622,7 104,2 36,9 12,7 4,3 40,7 22,1
0,80 2.880 13,00 46.800
3,14 1,48 0,96 0,61 0,39 20,4 1,58
116,0 41,0 14,1 4,7 25,3
0,85 3.060 14,00 50.400
1,58 1,02 0,65 0,41 1,71
43,3 15,8 5,2 28,6
0,90 3.240 15,00 54.000
1,08 0,69 0,43 1,83
54,5 18,8 6,3 2,7 32,1
1,00 3.600 16,00 57.600
1,20 0,76 0,48 0,34 1,95
75,2 25,8 8,6 3,7
1,20 4.320 17,00 61.200
1,44 0,92 0,58 0,41
98,7 33,9 11,3 4,9 2,1
1,40 5.040 18,00 64.800
1,68 1,07 0,67 0,47 0,33
42,9 14,3 6,1 2,6
1,60 5.760 19,00 68.400
1,22 0,77 0,54 0,38
52,8 21,1 9,1 3,8
1,80 6.480 20,00 72.000
1,38 0,96 0,68 0,47
63,6 21,1 9,1 3,8
2,00 7.200 25,00 90.000
1,53 0,96 0,68 0,47
73,2 25,0 10,7 4,5
2,20 7.920 30,00 108.000
1,68 1,06 0,74 0,52
29,2 12,5 5,3
2,40 8.640 35,00 126.000
1,16 0,81 0,56
33,6 14,4 6,1
2,60 9.360 40,00 144.000
1,25 0,9 0,6
Débit Ø Ø Ø Ø Ø Débit Ø Ø Ø Ø Ø
l/s kg/h 160x14,6 200x18,2 250x22,7 315x28,6 400x36,3 l/s kg/h 160x14,6 200x18,2 250x22,7 315x28,6 400x36,3
1,2 0,4 0,1 21,6 7,4 2,4 0,8
5,00 18.000 45,00 162.000
0,37 0,24 0,15 2,14 1,37 0,86 0,53
1,5 0,5 0,2 26,1 8,9 2,9 0,9
5,50 19.800 50,00 180.000
0,41 0,26 0,17 2,38 1,52 0,96 0,59
1,7 0,6 0,2 10,6 3,5 1,1
6,00 21.600 55,00 198.000
0,4 0,29 0,18 1,67 1,05 0,65
2,3 0,8 0,2 12,4 4,1 1,3
7,00 25.200 60,00 216.000
0,5 0,33 0,18 1,82 1,15 0,71
2,9 1,0 0,3 14,3 4,9 1,5
8,00 28.800 66,00 237.600
0,6 0,38 0,21 1,98 1,26 0,78
3,5 1,2 0,4 16,4 5,4 1,7
9,00 32.400 70,00 252.000
0,7 0,48 0,27 2,13 1,34 0,83
4,2 1,5 0,5 18,6 6,1 1,9
10,00 36.000 75,00 270.000
0,74 0,48 0,30 2,28 1,44 0,89
5,0 1,7 0,6 20,9 6,9 2,2
11,00 39.600 80,00 288.000
0,82 0,52 0,33 2,43 1,53 0,95
5,9 2,0 0,7 8,5 2,7
12,00 43.200 90,00 324.000
0,89 0,57 0,36 1,72 1,07
6,8 2,3 0,8 10,3 3,3
13,00 46.800 100,00 360.000
0,97 0,62 0,40 1,92 1,19
7,7 2,7 0,9 12,2 3,9
14,00 50.400 110,00 396.000
1,04 0,67 0,43 2,11 1,31
8,8 3,0 1,0 4,5
15,00 54.000 120,00 432.000
1,12 0,71 0,46 1,43
9,8 3,4 1,2 5,2
16,00 57.600 130,00 468.000
1,19 0,76 0,49 1,54
11,0 3,8 1,3 6,0
17,00 61.200 140,00 504.000
1,27 0,81 0,52 1,66
12,1 4,2 1,4 6,8
18,00 64.800 150,00 540.000
1,34 0,86 0,55 1,78
13,4 4,6 1,6
19,00 68.400
1,41 0,90 0,58
14,7 5,0 1,7
20,00 72.000
1,49 0,95 0,61
21,9 7,5 2,6 0,8 0,3
25,00 90.000
1,86 1,19 0,76 0,48 0,30
30,5 10,4 3,6 1,2 0,4
30,00 108.000
2,23 1,43 0,91 0,57 0,36
13,7 4,7 1,5 0,5
35,00 126.000
1,66 1,06 0,67 0,42
17,5 6,0 2,0 0,6
40,00 144.000
1,9 1,22 0,77 0,48
Le tableau indique la perte de charge z en fonction d’un coefficient r = 1 pour le transport de l’eau à 10°C et pour diffé-
rentes valeurs de la vitesse d’écoulement v (m/s).
Vitesse
d'écoulement 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 2,1 2,2 2,3 2,4 2,5
v m/s
Perte de charge
0,1 0,2 0,5 0,8 1,3 1,8 2,5 3,2 4,1 5,0 6,1 7,2 8,5 9,8 11,3 12,8 14,5 16,2 18,1 20,0 22,1 24,2 26,5 28,8 31,3
z (mbar)
Vitesse
d'écoulement 2,6 2,7 2,8 2,9 3,0 3,1 3,2 3,3 3,4 3,5 3,6 3,7 3,8 3,9 4,0 4,1 4,2 4,3 4,4 4,5 4,6 4,7 4,8 4,9 5,0
v m/s
Perte de charge
33,8 36,5 39,2 42,1 45 48 51 55 58 61 65 68 72 76 80 84 88 92 97 101 106 110 115 120 125
z (mbar)
La perte de charge locale z est calculée au moyen de la formule z = 5v2 • ∑r et la perte de charge totale de l’installation
sera la somme de la perte de charge distribuée r et du total des pertes de charge locales z.
1. Les valeurs indiquées dans la colonne « eau froide » doivent être utilisées pour calculer les distributions d'eau froide.
2. Les valeurs indiquées dans la colonne « eau chaude » doivent être utilisées pour calculer les distributions d'eau
chaude.
3. Les valeurs indiquées dans la colonne « total d’eau froide + chaude » doivent être utilisées pour déterminer le total
des unités de charge et du débit en amont correspondant du système de préparation de l'eau chaude.
Dans les tronçons de connexion àux périphériques individuels, referez-vous aux tableaux D.1 et D.2.
(1)
Les valeurs de la vitesse sont celles de la norme UNI EN 806-3
q1 x N1 q2 x N2 qn x Nn
Appliquer la formule suivante : Qmax = [ —————— + —————— + —————— ] x f1 x f2 x f3
d1 d2 dn
où :
Hôtels et pensions
a) chambres avec salle de bains avec baignoire de 180 à 200
b) chambres avec salles de bains avec douche 130
c) chambres avec lavabo et bidet 60
Bureaux de 15 à 200
Hôpitaux et cliniques de 130 à 150
Centres sportifs de 50 à 60
Vestiaires dans des établissements de 30 à 50
* Les valeurs indiquées doivent être multipliés par les facteurs de correction indiqués dans les tableaux suivants pour tenir compte du nombre de logements, des dimensions de chaque logement et du niveau de vie de l’utilisateur.
TABLEAU E.2 - EAU CHAUDE: DEMANDE POUR CHAQUE APPAREIL POUR CHAQUE UTILISATION
Appareil N=l
Baignoire 170 cm. x 70 cm avec douche à main de 160 à 200
Baignoire 105 cm. x 70 cm de 100 à 120
Douche de 50 à 60
Lavabo de 10 à 12
Bidet de 8 à 10
Évier de cuisine de 15 à 20
Hôtels et pensions *
a) chambres de jour avec saille de bain avec baignoire ou douche de 2,5 à 3
b) chambres avec lavabo et bidet de 3 à 4
Bureaux 1
Hôpitaux et cliniques de 3 à 4
Centres sportifs ** 1
Vestiaires dans des établissements ** 1
* Une exception sont les hôtels destinés à recevoir des grands groupes pour lesquels cette période peut tomber de 1 h à 1,5 h.
** Les durées indiquées sont à référer à la consommation correspondante au nombre effectif des utilisateurs.
D’après le tableau on déduit qu’un tuyau D. 90 – SDR 7,4 peut alimenter simultanément 250 UC (250 / 7 = 35 apparte-
ments composés d’une salle de bain + cuisine).
BAR
L’essai hydraulique à froid prescrit par la norme européenne normes euro-
15
péennes CEN TR 12108 et EN 806-4 (procédure C) prévoit la procédure dé-
0,6 BAR 0,2 BAR
crite ci-après.
2 Porter la pression à 15 bar, répéter ensuite l’opération encore 2 fois toutes les 10
minutes.
5 Durant ces 2 heures la pression ne doit pas diminuer de plus de 0,2 bar.
6 Le résultat de l’essai doit être enregistré.
A = effet négligeable
Le matériau doit être adapté à toutes les applications qui présentent ces conditions ambiantes.
B = absorption limitée ou attaque
Le matériau doit être adapté à la plupart des applications mais il est conseillé d'effectuer des essais supplémentaires pour
déterminer l'aptitude du polypropylène dans un milieu spécifique.
C = absorption élevée et / ou perméation rapide
Le matériau doit être adapté aux applications où seulement un type de service intermittent est prévu ou dans le cas où la
dilatation ne provoque aucun effet nuisible sur la partie impliquée. Il est conseillé d'effectuer des essais supplémentaires
pour déterminer l'aptitude du polypropylène dans un milieu spécifique.
D = attaque étendu
L'échantillon se dissout ou se désintègre. Le polypropylène n'est pas recommandé.
Temp. Temp.
Environnement Conc. % Environnement Conc. %
20°C 60°C 100°C 20°C 60°C 100°C
Térébenthine 100 C C C
Tétrahydrofurane 100 C C C
Tétraline 100 C C C
Toluène 100 C C -
Trichloracétique, acide 10 A A -
Trichloréthylène 100 A A -
(80°C)
Urée A A -
Urine A A -
Vins A A -
Whisky A A A
Xylène 100 C C C
Acier au carbone
Polypropylène
Nitrile Buna–N
Acétal (Delrin)
PTFE (Teflon®)
Polyuréthane
PVDF (Kynar)
Hastelloy–C
Nylon 6, 66
Aluminium
PVC Type II
Céramique
PVC Type I
Neoprène
Viton–A
Silicone
Tygon®
Cuivre
Laiton
EPDM
PEHD
Kel–F
CPVC
Silice
ABS
FEP
Acétaldéhyde U A U R U U A A U U X A A C U U A U U – R E E G E G U U
Acétamide – A – R R R A A U – C A A B A U B U B – – G G – – G – –
Acétate d'ammoniume – – A R A – A A R R R A – A B – – A A – – G G – – G U U
Acétate d'amyle U B U R R R X A U U A A A U U U U U U A R E E G E E E G
Acétate de butyle U A X R A R X A U U B B A X U – U U U – R G G G G E G G
Acétate de méthyle U X U R R R X A U U B X A X U – U A U – – G G S E G – –
Acétate de plomb B B A R R R A A R R A A A A B – A B U A – G G U G U U G
Acétate de sodium B B A R R R A A R R A A A B B – U – U A – G G U G E G G
Acétate de vinyle U – U R – U B A U U A B – X X – U U A B – E E G E E G –
Acétate d'éthyle U A U R R R A A U U X B A U U U B U U A R G G G G – G G
Acétate d'isopropyle U U U R R R B A U U X B – U U – U – U – – E G E G G – –
Acétone U A U R R R A A U U U A A U U U B U U A R E E G E E G E
Acétone de méthyle – U – – A – – A U – U A – U U – – A U – – A A – – A A –
Acétonitrile U – – R R – R R – – R R – – – – – – – – – G G G – E G G
Acétophénone U – – R R U R R U U R R – U U – – – U – – G G G G G G G
Acetylène R – R R R – R R R R R R – R R – – – R – – E E G G E U U
Acide acétique 10% X X C R U R B A U – C A A C C – C U R A R E E U E G U G
Acide acétique, glacial U U U R U R A A U U B U A X X U B U U A R E E U E E U U
Acide adipique R – A R – R B A R R A A A B X – U – X – – G G G E G – G
Acide benzènesulphonique 10% R – R R U R R R R R R U – R U U – – R – R G G U G U G –
Acide benzoïque R B A R X B R A R R A U A B U U B A A A R G G U E G G G
Acide butyrique U A U R U U R R U U A B A U U – U U B – R G G U E G G G
Acide carbonique R B A R R R A A R R A B A X X R A – A A – G G G E E G G
Acide chloracetique U U U R U U C A R R A B A U U U U A U – – U U U E U U U
Acide citrique U B B R R A A A R – A A A A A – A – A A R E E U E E – E
Acide crésylique 50% U U U R U R X R R R R X – U U U U – A – – G G G G G – –
Acide formique 5% – U R R U R R R R – R R – R U – – – R – – G E – E U S E
Acide glycolique B A A R – R A A R R B A B A A – A A A – – G G U G G – –
Acide glycolique 70% – A A – – – – A U – A A – A A – – – A – – – – – – – – –
Acide lactique U B A R R – B A R R B A A A X – A A A A – G G U G G G G
Acide linoléique A B A R U U B A R R A U – U B – B A B – – G G U G G U U
Acide maléique R A A R X R R A R R A X – U U – – C A – R G G U G – G –
Acide malique R A R R X R A A R R A U – X A – B A A – – E E U G G – U
Acide monochloracétique – U – – U U – A – – B C B A U – – – C – – A A – A U* B U*
Acide oléique X A A R R U B A R R A B B X B R U C B A – E E G G G S G
Acide oxalique 5% R U R R U R R R R R R R – R U – – – R – – U G U G G S G
Acide palmitique 10% A A A R R R B A R R A B – U A R U B A – – – G – – G G G
Acier au carbone
Polypropylène
Nitrile Buna–N
Acétal (Delrin)
PTFE (Teflon®)
Polyuréthane
PVDF (Kynar)
Hastelloy–C
Nylon 6, 66
Aluminium
PVC Type II
Céramique
PVC Type I
Neoprène
Viton–A
Silicone
Tygon®
Cuivre
Laiton
EPDM
PEHD
Kel–F
CPVC
Silice
ABS
FEP
Acide phtalique B C X R R – A A U U A A – A U – B – A – – G E S G G G G
Acide picrique X A U R U U A A U U A A – A X – B – A – R G G U G E U U
Acide stéarique U A B R R R A A R R A X – B B R B B A – R G E S E G S G
Acide tartrique – B A – B – A A A – B B A A A – A B A A – C C – B B U* A
Acide tétrachloroacétique R – R R R R R R R R R U – R R R – – R – – E E – G G S U
Acide trichloracétique – – R R U R A A R – B B A U R – U C C A – U U U G U G G
Acrylonitrile U – X R R R A A X U A X – C U – U – U – – G G G G E G G
Acylate de méthyle – B – – – – U – – – B B – B U – U – U – – A – – – – – –
Alcool allylique U – R R R R R R R R R R – R R – – – R – – E E G G G G E
Alcool amylique R A A R A R B A R U A A A A B U U A B A R G G G G G G G
Alcool benzylique U A X R B U A A U U A B A X X U – U A A R E E G G G G E
Alcool butylique U A A R B B R A R U A A A A X – B B A – R E E G G E G G
Alcool d'hexyle – A – – A – – A A – – C – A A – B A C – – A A – A A – –
Alcool diacétonique – A U R R R R A R – A A B U U – U B U – – G G G E E E E
Alcool éthylique B A B R R R A A R R R A B A C U B C A A R G G G E E G G
Alcool isobutylique B A – – A – A A A – – A – A B – A A A – – – – – – – – –
Alcool isopropylique R A C R U R A A R R R A – B B U A A A A – G G G G G G G
Alcool méthylique U A A R R R A A R R A A A A A U A A U A R G G G E G G G
Alcool méthylique 10% U A A – B B A A – – A A A A A – A A A A – – – – – – – –
Alcool octylyque A A B – A – – – – – – B – B B – B – B – – A A – C A – A
Alcool propylique X A A R U R A A R R A A A A A – A A A A – E E G E G G G
Aldrine (1 oz./gal.) – – – – – – – – – – – – – – – – – – – – – E E G – E – –
Amide de méthyle U U – – – – A A U – C A A – B – – U U – – A A – – A U* –
Anhydride phtalique B C U R – – U A U – A A – A U – – B A – – E E G E E G –
Aniline U A X R X R X A U U A X A U U U U C B A R E E G G G U U
Antigel B U A – U – U – A – – A – C A – C B A – – – A – – A – –
Aroclor 1248 – – – R A U U A – – – B A U X – B – A – – G G G E E E E
Asphalte – B X R A R B A A – A U A U X – U – A – – G G G – E E E
Benzaldéhyde X A U R A U X A U U A A A U U U U U U A R G G U G G G G
Benzène U A U R A U X A U U A U B U U U U C A A R G G G G E G G
Benzoate de sodium A – A R R R A A R R A A – A B – – B A – – – – – G G – E
Benzoate d'éthyle U – U – – U B A U – U – – U U – U U A – – – – – – – – –
Benzol U A U R X U U A U U A U A U U U U C A A R G G G G E G G
Benzonitrile – – – R R A – A – – – – A – – – A – – – – U U – C – – –
Bromobenzène – – – R – – U R – – R U – U U – – – R – – – – – – – – –
Bromure de méthyle U U U R U R X A U U A U – U B – – – A – – G G G – U – –
Bromure d'éthylène U – U R R U U A U U A X B X U – U U A – – E E – E – – –
Butadiène U A A R R U U A R U A X A B X U U – B – – G G G G G G G
Butane B A C R R U U A R R A U A A A R U C A – – G G E G G G G
Butyl phthalate – – U R R – R R R – R B A D U – A – C – – G G – G U G G
Butyl-èther – U U R A – – A R – A U A U B – U A U – – – E E – E – –
Butylméthylcétone – U – – U U U – – – U A – U U – U – U – – A A – – – – –
Butylphénol U – U R – – U R U U R – – U – – – – U – – G E – G G – –
Carburant d'aviation JP–4, JP–5 – A R R R – A A R R A U A U A U U A A – – G G G E G E –
Carburant plombé U A U R R U X A R – A U A B A R U C A A – G G G E G G G
Carburant sans plomb U A X R R U X A R – A U A B A R U C A – – G G G E G G G
Chlordane (¼ lb./gal.) U – – – – – – R – – – U – C B – U – A – – G G G – – – –
Chlorhydrate d'aniline U – U R U U X A X U A B – U U – U U A – R U U U U U U G
Chlorhydrine éthylénique U U U R U U X A U U A B – X U U C U A – – G G G G G G G
Acier au carbone
Polypropylène
Nitrile Buna–N
Acétal (Delrin)
PTFE (Teflon®)
Polyuréthane
PVDF (Kynar)
Hastelloy–C
Nylon 6, 66
Aluminium
PVC Type II
Céramique
PVC Type I
Neoprène
Viton–A
Silicone
Tygon®
Cuivre
Laiton
EPDM
PEHD
Kel–F
CPVC
Silice
ABS
FEP
Chlorobenzène U X U R R U U B U U A U A U U – U A A A R G G G E G G G
Chlorobromométhane – – – – C – A A U – – B – U U – U – A A – – – – – – B –
Chloroéthane U A U R R R X A U U A X A U U – U – B – – G G G – – – G
Chloroforme U A U R R U X A U U A U B U U U U B A A R E E U G G G G
Chloronaphthalène U – – – – – – – R – – – – U U – – – – – – – G – E U – –
Chlorophénol 5% (aqueux) – R U R U – – R U U R – – – – – – – – – – G G S E – – –
Chlorure d'acétyle U – U R U U U A U U R U – U U U – – R – R G G G – U U U
Chlorure d'allyle U – U R – R R R U U R U – U U – – – – – R G E U – U – –
Chlorure d'amyle U – U R U U U R U U U R – U U – – – R – – G G U E U G G
Chlorure de benzyle U A U R R – C R R – R U – U U – U – A – – G G U – U U U
Chlorure de méthyle U B U R R U U A U U A U A U U U U U A – – E E U G U E G
Chlorure de méthylène U B U R U U B A U U B X A U U U – U B – R G G G E E G G
Chlorure de vinyl U – U – A – – A U – B C – U U – – U A A – B A – A B – B
Chlorure d'éthyle U R U R R U U R U U R R – U R U – – B – R E E G G – – G
Chlorure d'éthylène U A U R R R X A U U A X A U U – U – B – – G G G – – – G
Crésol U U U R U U U R X U R U A U U U U U X – R E G G G G – –
Cyclohexane R A U R R R U A X – R U A U B R U U A – – G G G G G G G
Cyclohexanone U A U R R U U A U U R B U U U – U U U A – G G U G G G G
DDT 5% – – U – – – – – U U – – – – – – – – – – – E E G – E – –
Détergents (général) B A A R R R A A R R A A A B A – A A A A – E G G E G G E
Dibromure d'éthylène – – – R – – R R – – R – – – – – – – – – – – G – G – G –
Dichlorobenzène U – U R X U C A U U A U – U U – U – C – – – G – E G – –
Dichloroéthane U A U R R R X A U U A U A U U – – U C A R G G G G G G –
Dichloroéthylène U – – R R – R R U U R U – U U – – – R – – G G – G G – –
Dichlorofluorométhane – – – R – – – R U U – – – – – – – – – – – – – – – – – –
Dichlorure de méthyle – U – – C – U – – – U U – – U – – – A – – – – – – – – –
Diéthanolamine – – – R R – R R U U U – – R – – – – – – – E E E E E – G
Diéthylamine U B U R R U A X U – X B A A C – B C A – – G G U – G – –
Diéthylène glycol B A A R R R A A X – A A – A A – B C A – – E E E G G – G
Diméthylaniline U U U R R – X A U U A B A U U – U U U – – B B – B A – –
Diméthylformamide U X U R R R A X U U U X A X U – C U X – – – G U – E – –
Diméthylsulfoxyde – R U R R R R R U – U – – – – – – – – – – – – – – – – –
Dinitrotoluene – – – – – – – R – – – U – U U – U – X – – G G – – – – –
Dioctylphtalate U – U R R U U R U U R R – U U U – – R – – G G G – E – –
Dioxane U R – R R U R R U – U U – U U – – – U – – G G G G G G G
Diphényle – – – R R – U A U – – U – B U R U – A – – G G G G G G G
Eau blanche (usine à papier) R B – – R – R – R – – – – A – – – – A – – A A – – – – –
Essence (forte teneur en
U B A – – – A B A – A U A A A – U A A A – A A – A U – –
aromatiques)
Esters (général) – – U R R – – R U U R – – – – – – – – – – – G – – – – –
Éthane – A A – U – U A A – A U – B A – U A A – – A A – – – – A
Éthanolamine – U U R R – X A U – X B U B B – B – U A – E E G G G – –
Éther diéthylique U R U R R U R A U U R U C U U – U – U – – G G G G G G G
Éther diméthylique – – – R – – – R – – – – – U R – – – – – – G G – G – G G
Éther éthylique U A U R R U U A U U R U A U X U U – U – R G G G G G G G
Éther isopropylique – U R R R – X A R R X U A U B R U A U – – E G – – – G G
Éthers (général) U A U – R U U A U U R C B U X – U C X – R E E G G G G G
Éthylbenzène – R – R – U U R U U R U – U U – – – R – – S G U E G – –
Éthylène glycol A B A R R R A A R R A A A A A R A B R A – G G G E E G G
Acier au carbone
Polypropylène
Nitrile Buna–N
Acétal (Delrin)
PTFE (Teflon®)
Polyuréthane
PVDF (Kynar)
Hastelloy–C
Nylon 6, 66
Aluminium
PVC Type II
Céramique
PVC Type I
Neoprène
Viton–A
Silicone
Tygon®
Cuivre
Laiton
EPDM
PEHD
Kel–F
CPVC
Silice
ABS
FEP
Éthylènediamine U X U R U – R A U U B A U X A – A – B – – G G G U G U U
Éthylsulfate – – – – – – – A – – – – A – A – – – A – – U U – – – – B
Formaldéhyde 100% B A A – U – C A A – A A A C C – B B U – – C A – A A – A
Formaldéhyde 37% A A A R R R A A R R A A A B X U – – R – R E E U G G E G
Gazole – A A R R R A A R – A U A B A – U – A – – E E G G E E –
Heptane X A A R R R C A R R A U A B A U U B A – – G G G E G G G
Hexachloroéthane – – – – – – – R – – – – – – – – – – – – – G G – G G S G
Hexamine – – – R – – – R – – – – – – – – – – – – – E E – E E G –
Hexane U A B R R U B A R R A U A B A R U U A – – E E G E G G –
Huile hydraulique (petrole) – B – – A – U A A – A U – A A – B A A – – A A – A A A A
Huile hydraulique (synthétique) – – – – A – U A A – A A – A U – B A A – – A A – A A A A
Huile moteur C B A R R U U A R R B U A B A – – A R A – G G G – – G G
Huiles de chauffage U A – R R R A B R R B U A B X R U A A – – G G G G G G G
Hydrazine – B U – – U C C – – A A – B B – B – A – – A A – – – – A
Hydroquinone X A A R U – A A R R R U – A X – – – B – – G G G G G G –
Hypochlorite de sodium 20% R U R R U R R R R R R R A U U – B C A – U U U U U G G S
Iodoforme – – – R – – R C – – C A – A U – – C R – R E E U U G – G
Isooctane – – – – A B A A A – A U A B A – U A A – – A A – – A A –
Isotane – – – – U – U – A – A – – U A – – – – A – – – – – U – –
Kérosène X A R R R R R A R R A U A A A U U U A A – G G G G G G G
Lessive blanche (usine de pâte) X U R R R – R R R R R R – R R – – – R – – G G S G G – –
Mélamine – A A – A – A A U – – A – U C – C U A – – – U – – – – –
Méthacrylate de méthyle – U R R – – X R R U B U – U U – C – U – – G G U – G – –
Méthane – A – R R – A A R R A X – B A – U – A – – E E G E E E G
Méthylchloroforme U – U R – – U R U U R U – U U – – – R – – – – – – – – –
Methyléthylcétone U U U R R U B A U U U A A U U U U U U A – G G G G G G G
Méthylisopropylcétone – – – – A – – A U – – C – U U – C – U – – A A – – A – A
Monoéthanolamine – U – R R – B A U U U B – X B – B – X – – E E G G G G G
Napthalène U X U R R U R A U U A U A U U R U C A A – E E G G G G G
n-Butylamine – X U R R U U A U U X – U U R – B U U – – – G G G G – –
Nitrobenzène U X U R R U B A U U A U A U U U U U B – R G G G G E G G
Nitrométhane U A U R U – R A R R A B A U U – U B U – – G G G – G – –
Nitrophénol – – – – – – – R – – – – – – – – – – – – – G G – – G – G
Octane – – – R – R R R U U R U – R R – – – R – – – G G – G G G
Oxalate d'ammonium 10% – – – R – – R R R – – R – – – – – – – – – G G U E E – U
Oxide de diphényle – U – – – – U A U – B U – U A – C U A – – B A – B B – A
Oxyde de propylène – – – R – R R R U U U R – U U – – – U – – E E – – – – –
Oxyde d'éthylène U U X R R R U A U U A X C U U U U – U – R G G G E E U –
Pentachlorophénol – – – – – – – R – – – – – – – – – – R – – – – E – – – –
Pentane – B – – A – U A A – A U – B A – U A A – – C C – A B – –
Pentanone de méthyle U – U R R R R A U U X B A U U – U – U – – G G G G G G G
Péroxide d'hydrogène (dilué) R R U R R R R R R – R R – U R – – – R – – G G U E E U U
Pétrole B B A R – U B A R – A U – B A – U – A – – G G – – G G G
Pétrole brut R R R R R U R U U U U U – U R R – – R – – E E G E E G G
Phénol 10% U X A R U R B A U U A B B U U U U C A A – G G G G E G G
Phtalate de diméthyle U – – R R – R R U U R – – U U – – – R – – E E E – E – –
Phtalate diéthylique – – – – – – – R – – – – – – – – – – – – – – – – – – – –
Phthalate de dibutyl U – U R R U R R U U U R – U U U – – U – – G G G G G G G
Plomb tétraéthyle U – R R – U R R R R R U – – U – – – R – – G G G – G G –
Acier au carbone
Polypropylène
Nitrile Buna–N
Acétal (Delrin)
PTFE (Teflon®)
Polyuréthane
PVDF (Kynar)
Hastelloy–C
Nylon 6, 66
Aluminium
PVC Type II
Céramique
PVC Type I
Neoprène
Viton–A
Silicone
Tygon®
Cuivre
Laiton
EPDM
PEHD
Kel–F
CPVC
Silice
ABS
FEP
Propylène B – – – – – – A B – – U – U U – U B A – – B A – – A – A
Propylène Glycol B B X R R R A A U U A A – C A – A – A A – G G G G G G G
Pyridine – B U R R R A A U U U X A U U – U U U A – G G G E G G G
Solvant d'acétate U – U R R R B A U U A A A C U – A U U – – E E G E E S G
Styrène – A U – A U – A U – – U – U U – U – B – – A A – U* A A B
Térébenthine U A A R R U X A X U A U A U R U U B A A – E E G G G S G
Tétrachloroéthane – A X R R – C A U U A U A U U – U – A – R E E E E G – S
Tétrachloroéthylène U A U R R U U A U U R U A U U U U – A – – E E G G G G G
Tétrachlorophénol – – – – – – R R – – R – – – – – – – – – – – – – – – – –
Tétrachlorure de carbone U B U R X U U R U U R U A U U U U B A A R E E G E U G E
Tétrahydrofuranne U A U R R U C A U U B U A U U – U – X A – E G E E U – –
Toluène U X U R R U C A U U A U B U X U U U C A – E E E E E E E
Toxaphène–Xylène 10-90% – – U R – – R R U – – – – – – – – – – – – G G S – S – –
Trichlorobenzène – – – – – – – R U – – – – U U U – – R – – – – E – – – –
Trichloroéthane – A – – – – C A C – A U A U U – U – A – – – – – – – – –
Trichloroéthylène U U U R R U C A U U B U A U U U U – X A – G G G E E G G
Trichlorofluorométhane – – – – – – – – U – – – – U U – – – – – – – G – – G – –
Trichloropropane U A – – – – – A – – – – A A U – – U A – – A A – A U* – A
Triéthanolamine R U R R R U R R U U R R – R U U – – R – – G G G G G U E
Triéthylamine U U A R R – U A R R A A A A C – – A X B – G G – – – – –
Triméthylpropane U – R R – – U R R R R – – – R R – – – – – – – – – – – –
Vernis A U – – A – U A U – U U – U U – U A U – – E E – – – – –
Vernis (diluants) A U – – A – U A U – – U – U U – U U U – – – G – – G – –
Xylène U A U R R U B A U U A U A U U U U U X A – G G G E G G G
Ce tableau doit être utilisé en tant que guide parce qu’il est difficile de reproduire les conditions d’utilisation. Pour garantir l’aptitude complète d’un matériau, il est opportun
d’effectuer un test de résistance chimique dans des conditions d’utilisation réelles.
Aucune donnée a été relevée en ce qui concerne les produits chimiques ayant un grand impact environnemental décrits ci-dessous :
* Composant à base de créosote et coaltar. À température ambiante ou inférieure, ces composés sont solides s’ils sont purs.
** Pesticides
Polysystem
CATALOGUE PRODUITS
PLATINUM PPR PIPE
LÉGENDE
Code: Code article Nupigeco
Ø: Diamètre extérieur
Remarque: toutes les dimensions doivent être considérés en millimètres avec une tolérance de 5%, sauf indication contraire.
142 PPR Piping System
COULEUR
COMPOSITION
CARACTÉRISTIQUES NOM GAMME IDENTIFICATION DESCRIPTION SDR Ép. GAMME DE
TUYAU
FAMILLE
NIRON MONOCOUCHE BLEU TUYAU EN PPR 6 2,5 16 ET 40 ÷ 125
NIRON MONOCOUCHE BLEU TUYAU EN PPR 7,4 3,2 25 ÷ 250
INSTALLATIONS NIRON MONOCOUCHE BLEU TUYAU EN PPR 11 5 32 ÷ 630
HYDRO- NIRON MONOCOUCHE BLEU TUYAU EN PP-RP 9 4 32 ÷ 400
SANITAIRES ET NIRON FG BLEU TUYAU EN PPR AVEC FIBRE DE VERRE 7,4 3,2 20 ÷ 400
HYDRONIQUES NIRON FIBER BLEU TUYAU EN PP-RP AVEC FIBRE DE VERRE 9 4 32 ÷ 400
NIRON CLIMA 11 BLEU TUYAU EN PPR AVEC FIBRE DE VERRE 11 5 32 ÷ 400
NIRON FIBER BLEU TUYAU EN PPR AVEC FIBRE DE VERRE 17 8 160 ÷ 400
INSTALLATIONS NIRON POLYSYSTEM MONOCOUCHE VERT TUYAU EN PPR 6 2,5 16 ÷ 125
HYDRO-
NIRON POLYSYSTEM MONOCOUCHE VERT TUYAU EN PPR 7,4 3,2 25 ÷ 250
SANITAIRES ET
HYDRONIQUES NIRON POLYSYSTEM FG VERT TUYAU EN PPR AVEC FIBRE DE VERRE 7,4 3,2 20 ÷ 400
NIRON MONOCOUCHE VIOLET TUYAU EN PPR 7,4 3,2 32 ÷ 160
EAU DE PLUIE
NIRON MONOCOUCHE VIOLET TUYAU EN PPR 11 5 32 ÷ 160
NIRON FG NOIR TUYAU PRÉ-ISOLÉ EN PPR AVEC FIBRE DE VERRE 7,4 3,2 32 ÷ 315
CHAUFFAGE ET
REFROIDISSEMENT NIRON CLIMA NOIR TUYAU PRÉ-ISOLÉ EN PPR AVEC FIBRE DE VERRE 11 5 32 ÷ 315
URBAIN (*) TUYAU PRÉ-ISOLÉ EN PPR AVEC
NIRON OB - FG NOIR 7,4 3,2 32, 40, 50, 63, 90, 110
BARRIÈRE ANTI-OXYGÈNE
BARRIÈRE NIRON OB - FG BLEU ET BLANC TUYAU EN PPR AVEC BARRIÈRE ANTI-OXYGÈNE 7,4 3,2 32, 40, 50, 63, 90, 110
ANTI-OXYGÈNE NIRON OB - CLIMA BLEU ET BLANC TUYAU EN PPR AVEC BARRIÈRE ANTI-OXYGÈNE 11 5 32, 40, 50, 63, 90, 110
(*) NIRON OB - MONOCOUCHE BLEU ET BLANC TUYAU EN PPR AVEC BARRIÈRE ANTI-OXYGÈNE 7,4 3,2 32, 40, 50, 63, 90, 110
TUYAU EN PPR AVEC FIBRE DE VERRE ET
NIRON FG NOIR 7,4 3,2 20 ÷ 400
PROTECTION CONTRE LES RAYONS UV
TUYAU EN PPR AVEC FIBRE DE VERRE ET
PROTECTION NIRON FIBER NOIR 9 4 32 ÷ 400
PROTECTION CONTRE LES RAYONS UV
CONTRE LES
TUYAU EN PPR AVEC FIBRE DE VERRE ET
RAYONS UV (*) NIRON CLIMA 11 NOIR 11 5 32 ÷ 400
PROTECTION CONTRE LES RAYONS UV
TUYAU EN PPR AVEC FIBRE DE VERRE ET
NIRON FIBER NOIR 17 8 160 ÷ 400
PROTECTION CONTRE LES RAYONS UV
NIRON MULTICOUCHE BLEU TUYAU EN PPR POUR EAU POTABLE AVEC BARRIÈRE CHIMIQUE 7,4 3,2 32 ÷ 110
RÉSISTANCE
TUYAU EN PPR POUR EAU NON-POTABLE
CHIMIQUE (*) NIRON MULTICOUCHE BLEU 7,4 3,2 32 ÷ 110
AVEC BARRIÈRE CHIMIQUE
CVCR
Eau potable Piscines Fluides chimiques Eau recyclée Air comprimé Chauffage Géothermie Secteur naval
Applications:
S min
Di
Dn
HVACR
FIG.11A
SDR 6 • S 2,5
CODE Dn S min Di Peso - Weight (Kg/m)
03TNIRR16 16 2,7 10,60 0,11
03TNIRR20 20 3,4 13,20 0,17
03TNIRR25 25 4,2 16,60 0,26
Q.té
03TNIRR32 32 Poids5,4 21,20 0,43 Litres
Code Ø Emb. 03TNIRR40 40 6,7 26,60 0,66
Dn S min Di
palette
03TNIRR50
03TNIRR63
50
63 kg/m 8,4
10,5
33,20
42,00
1,03
1,62 l/m
03TNIRR75 75 12,5 50,00 2,29
03TNIRR16 16 100 4.600
03TNIRR90
03TNIRR110
0,11 0,09 90
110
15,0
18,4
60,00
73,20
3,30
4,92
16 2,7 10,60
03TNIRR40 40
20,8 83,40 6,30
40 800 0,66 0,56 40 6,7 26,60
03TNIRR125 125
BARRE DA 4m
03TNIRR50 50 20 560
BAR LEGHT 4m 1,03 0,87 50 8,4 33,20
03TNIRR63
DRAWING No:
63 16 352 1,62
ITEM:
1,38 63 FULL BLUE PPR PIPE 10,5 42,00 NI10050
DESC: TUBO NIRON PPR BLU - SINGOLA PARETE
TNIRR NIRON
SDR6 - S 2,5 - MRS10
- MONOLAYER PIPE
SHEET OF REV.
60,00
03TNIRR110 110 8 112 4,92 4,21 110 18,4 73,20
03TNIRR125 125 4 80 6,30 5,46 125 20,8 83,40
Applications:
S min
HVACR Di
Dn
FIG. 11B
CODE Dn S min Di Peso - Weight (Kg/m)
03TNIRR2516 25 3,5 18,00 0,23
SDR 7,4 • S 3,2 03TNIRR3216
03TNIRR4016
32
40
4,4
5,5
23,20
29,00
0,37
0,57
03TNIRR5016 50 6,9 36,20 0,88
Q.té
03TNIRR6316 63
Poids 8,7 45,60 1,39
Litres
Code Ø Emb. Dn S min Di
03TNIRR7516 75 10,4 54,20 1,98
03TNIRR9016 90 12,5 65,00 2,83
palette
03TNIRR11016 110 kg/m 15,2 79,60 4,25 l/m
03TNIRR12516 125 17,1 90,80 5,41
03TNIRR2516 25
21,9 116,20 8,79
100 2.000
03TNIRR16016
03TNIRR20016 0,23 0,25 160
200 27.4 145,20 13,70 25 3,5 18,00
03TNIRR25016 250 34.2 181,60 21,25
03TNIRR3216 32 60 1.320
BARRE DA 4m
0,37 0,42 32 4,4 23,20
03TNIRR4016 40 40 800 0,57 0,66 40 5,5 29,00
BAR LENGHT 4m
DRAWING No:
ITEM: DESC: TUBO NIRON PPR BLUE - SINGOLA PARETE
03TNIRR5016 50 20 560 0,88 TNIRR_16
1,03 SDR 7,450 6,9
NIRON FULL BLUE PPR PIPE - MONOLAYER PIPE
- S 3,2 - MRS10 36,20NI10051
SHEET OF REV.
03TNIRR6316 63
1 1 -1
16 352 - info@nupigeco.com1,39 1,63 63 8,7 45,60
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirr_16 -
SDR7,4\NI10051.dwg
www.nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
Applications:
S min
Di
HVACR
Dn
SDR 11 • S 5
03TNIRR9010 90 8,2 73,60 1,99
03TNIRR11010 110 10,0 90,00 2,96
03TNIRR12510 125 11,4 102,20 3,84
03TNIRR16010 160 14,6 130,80 6,22
Q.té
03TNIRR20010 200 Poids 18,2 163,60 9,76 Litres
Code Ø Emb. 03TNIRR25010 250 22,7 204,60 15,00 Dn S min Di
palette
03TNIRR31510
03TNIRR35510
315
355
kg/m 28,6
32,2
257,80
290,60
23,70
30,00
l/m
03TNIRR3210
36,3 327,40 38,20
32
03TNIRR40010° 400
60 1.320
03TNIRR45010*° 0,26 0,54 450 40,9 368,20 48,10 32 2,9 26,20
03TNIRR50010*°^ 500 45,5 409,20 59,10 * Diametro non compreso nella norma UNI ISO 15874 + Amendament
03TNIRR4010 40 40 800
03TNIRR56010*°^
03TNIRR63010*°^
0,40 0,83 560
630
50,8
57,2
458,40
515,60
74,00
93,50
40 °^ Diametro 3,7
non presente nella norma ASTM F2389
32,60
Diametro non presente nella norma DIN 8077-8078
03TNIRR5010 50 20 560
BARRE DA 4m
0,63 1,31 50 ° Diameter not present4,6
* 40,80
Diameter not included in the standard UNI ISO 15874 + Amendament
in the standard ASTM F2389
03TNIRR6310 63
BAR LEGHT 4m
16 352 0,99ITEM: 2,07 63 5,8 51,40
^ Diameter not present in the stardard DIN 8077 - 8078
DESC: TUBO NIRON PPR BLUE - SINGOLA PARETE DRAWING No:
NIRON FULL BLUE PPR PIPE - MONOLAYER PIPE NI10053
03TNIRR7510 75 12 240 1,37 TNIRR_10
2,96 C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirr_10 -
SDR11\NI10053.dwg
75
SDR11 - S 5 - MRS10
6,8 61,401 1 -1 SHEET OF REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
(1)
Diamètre non inclus dans la norme UNI EN ISO 15874 + Amendement • (2) Non inclus dans la norme ASTM F2389 • (3) Non inclus dans la norme DIN 8077-8078
Applications:
S min
Di
Dn
HVACR
CODE Dn S min Di Peso - Weight (Kg/m)
03TNIRR329° 32 3,6 24,80 0,31
03TNIRR409° 40 4,5 31,00 0,48
03TNIRR509°
03TNIRR639°
50
63
5,6
7,1
38,80
48,80
0,74
1,17 FIG. 11D
03TNIRR759° 75 8,4 58,20 1,65
SDR 9 • S 4
03TNIRR909° 90 10,1 69,80 2,38
03TNIRR1109° 110 12,3 85,40 3,54
03TNIRR1259° 125 14,0 97,00 4,58
03TNIRR1609° 160 17,9 124,20 7,46
03TNIRR2009° Q.té 200 Poids
22,4 155,20 Litres
11,57
Code Ø Emb. 03TNIRR2509° 250 27,9 194,20 17,96 Dn S min Di
03TNIRR3159°
03TNIRR3559°
palette 315
355
kg/m
35,2
39,7
244,60
275,60 l/m
28,36
35,95
03TNIRR4009°^ 400 44,7 310,60 45,50
03TNIRR329* (2) 32 60 1.320 0,31 0,48 32 3,6 24,80
° Diametro non presente nella norma ASTM F2389
03TNIRR409* (2) 40 40 800
BARRE DA 4m
0,48 0,75 40 ^ Diametro non presente nella norma31,00
4,5 DIN 8077-8078
03TNIRR639* (2) 63
DRAWING No:
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
(2)
Non inclus dans la norme ASTM F2389 • (3) Non inclus dans la norme DIN 8077-8078
Applications:
S min
Di
HVACR
Dn
FIG. 11E
03TNIRRFG2074 A 20 2,8 14,40 0,16
03TNIRRFG2574 A 25 3,5 18,00 0,24
03TNIRRFG3274 A 32 4,4 23,20 0,39
03TNIRRFG4074 A 40 5,5 29,00 0,59
BARRE DA 4m
03TNIRRFG4074 A 40
BAR LENGHT 4m
40 800 0,59
ITEM: 0,66 DESC: TUBO NIRON40 FG BLU CARICATO 5,5 -
VETRO 29,00 DRAWING No:
TUBO COMPOSTO NI10054
TNIRRFG_74
03TNIRRFG5074 A 50 20 560 0,91 1,03 MULTILAYER50PIPE 6,9
NIRON FG BLUE PPR FIBER GLASS PIPE -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirrfg_74 - SDR7,4
SDR 7,4 - S 3,2 - MRS10
FG\NI10054.dwg
36,201 1 -1
SHEET OF REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
Dn
HVACR
CODE TYPE Dn S min Di Peso - Weight (Kg/m)
03TNIRCL329 A 32 3,6 24,80 0,33
03TNIRCL409 A 40 4,5 31,00 0,51
03TNIRCL509
03TNIRCL639
A
A
50
63
5,6
7,1
38,80
48,80
0,78
1,24
TYPE A
FIG. 11F
03TNIRCL759 A 75 8,4 58,20 1,74
SDR 9 • S 4
03TNIRCL909 A 90 10,1 69,80 2,51
03TNIRCL1109 A 110 12,3 85,40 3,73
03TNIRCL1259 A 125 14,0 97,00 4,82
03TNIRCL1609 A 160 17,9 124,20 7,83
03TNIRCL2009 Q.té B 200 Poids
22,4 155,20 12,00 Litres
Code Type Ø Emb. 03TNIRCL2509 B 250 27,9 194,20 18,70
Dn S min Di
03TNIRCL3159
03TNIRCL3559 palette B
B 315
355 kg/m
35,2
39,7
244,60
275,60
29,50
37,40 l/m TYPE B
03TNIRCL4009 B 400 44,7 310,60 47,30
03TNIRCL329 A 32 60 1.320 0,33
TYPE A : TUBO MULTISTRATO - MULTILAYER PIPE
0,48 32 3,6 24,80
03TNIRCL409 A 40 40 TYPE 800 0,51 0,75
B: TUBO MONOPARETE CARICATO AL 6% - MONOLAYER PIPE 6% FIBER RENFORCED
BARRE DA 4m 40 4,5 31,00
BAR LEGHT 4m
03TNIRCL509 A 50 20 560 0,78
ITEM: 1,03DESC: TUBO NIRON50 5,6VETRO -
FIBER BLU PP-RP CARICATO
TUBO MULTISTRATO
38,80
DRAWING No:
NI10066
TNIRCL_9
03TNIRCL639 A 63 16 352 1,24 1,87 NIRON MULTILAYER63 7,1
FIBER BLUE PP-PR FIBER GLASS PIPE -
PIPE
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnircl_9 - SDR9
SDR9 - S4 - MRS12,5
FIBER\NI10066.dwg
48,80
SHEET OF
1 1 -1
REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
Dn
HVACR
CODE TYPE Dn S min Di Peso - Weight (Kg/m)
03TNIRCL3211 A 32 2,9 26,20 0,28
03TNIRCL4011
03TNIRCL5011
A
A
40
50
3,7
4,6
32,60
40,80
0,43
0,67
TYPE A
FIG. 11G
03TNIRCL6311 A 63 5,8 51,40 1,04
SDR 11 • S5
03TNIRCL7511 A 75 6,8 61,40 1,44
03TNIRCL9011 A 90 8,2 73,60 2,08
03TNIRCL11011 A 110 10,0 90,00 3,10
03TNIRCL12511 A 125 11,4 102,20 4,02
03TNIRCL16011
Q.té A 160
Poids
14,6 130,80 6,50
Litres
Code Type Ø Emb.
03TNIRCL20011 B 200 18,2 163,60 10,09
Dn S min Di
palette kg/m l/m
03TNIRCL25011 B 250 22,7 204,60 15,01
03TNIRCL31511 B 315 28,6 257,80 24,67
03TNIRCL35511 B 355 32,2 290,60 31,20 TYPE B
03TNIRCL3211 A 32 60 03TNIRCL40011
1.320 0,28 B
0,54 400
32
36,3 327,40
2,9 39,51
26,20
03TNIRCL4011 A 40 40TYPE B: TUBO MONOPARETE
800 CARICATO AL0,43 0,83 40 3,7 32,60
TYPE A : TUBO MULTISTRATO - MULTILAYER PIPE
6% - MONOLAYER PIPE 6% FIBER RENFORCED
BARRE DA 4m
03TNIRCL5011 A 50 20 BAR LEGHT 4m 560 0,67
ITEM:
1,31 TUBO NIRON CLIMA
DESC:
50 11 BLU PPR CARICATO
4,6VETRO - 40,80
DRAWING No:
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
Dn
HVACR
FIG. 11H
TYPE A
CODE TYPE Dn S min Di Peso - Weight (Kg/m)
03TNIRCL16017 A 160 9,5 141,00 4,65
03TNIRCL20017 B 200 11,9 176,20 6,90
SDR 17 • S 8
03TNIRCL25017 B 250 14,8 220,40 10,68
03TNIRCL31517 B 315 18,7 277,60 16,91
03TNIRCL35517 B 355 21,1 312,80 21,39
03TNIRCL40017 B 400 23,7 352,60 27,07
BARRE DA 4m
DRAWING No:
ITEM: DESC: TUBO NIRON CLIMA 17 BLU PP-RP CARICATO VETRO
03TNIRCL20017 B 200 4 32 TNIRCL_17
6,90
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnircl_17 - SDR17
24,37
- TUBO MULTISTRATO
NIRON CLIMA 17 BLUE PP-PR FIBER GLASS PIPE -
MULTILAYER PIPE
200 11,9
NI10067
SHEET OF
1 1
REV.
-1
176,20
03TNIRCL25017 B 250
CLIMA\NI10067.dwg
SDR17 - S8 - MRS12,5
4
www.nupigeco.com - info@nupigeco.com
32 10,68 38,13 250
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
14,9 220,40
03TNIRCL31517 B 315 4 32 16,91 60,49 315 18,7 277,60
03TNIRCL35517 B 355 4 32 21,39 76,81 355 21,1 312,80
03TNIRCL40017 B 400 4 32 27,07 97,60 400 23,7 352,60
Applications:
S min
Di
Dn
HVACR
CODE
16V6001
Dn
16
S min
2,7
Di
10,60
Peso - Weight (Kg/m)
0,11 FIG. 12A
16V6002 20 3,4 13,20 0,17
16V6008
SHEET OF REV.
75 12 240
www.nupigeco.com - info@nupigeco.com
2,29 1,96
C:\Vault_Temp\Disegni\Corinna\Tabelle\Polysystem\Tubo SDR6 -
16V60\PS10044.dwg
SDR6 - S75
MONOLAYER PIPE
2,5 - MRS10 12,5
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
50,00
1 1 -1
Di
Dn
HVACR
CODE
16V6001
Dn
16
S min
2,7
Di
10,60
Peso - Weight (Kg/m)
0,11 FIG. 12B
16V6002 20 3,4 13,20 0,17
V60
16V6007/16 63 16 352 1,38 1,63 63 PIPE 8,7 45,601 1 -1
NIRON-POLYSYSTEM FULL GREEN PPR PIPE - SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Polysystem\Tubo SDR6 -
MONOLAYER
16V60\PS10044.dwg
SDR6 - S 2,5 - MRS10
16V6008/16 75
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
Applications:
S min
Di
Dn
HVACR
CODE TYPE Dn S min Di Peso - Weight (Kg/m)
16VFG6002 A 20 2,8 14,40 0,16
16VFG6003
16VFG6004
A
A
25
32
3,5
4,4
18,00
23,20
0,24
0,39 FIG. 12C
16VFG6005 A 40 5,5 29,00 0,59 TYPE A
16VFG6005 A 40
BAR LENGHT 4m
40 800 ITEM: 0,59 0,66 40 5,5
DESC: TUBO NIRON-POLYSYSTEM FG VERDE CARICATO
29,00
DRAWING No:
PS10046
16VFG6006 A 50
VETRO - TUBO COMPOSTO
20 560 0,91
VFG60 1,03PIPE - MULTILAYER50 6,9
NIRON-POLYSYSTEM FG GREEN PPR FIBER GLASS
PIPE
C:\Vault_Temp\Disegni\Corinna\Tabelle\Polysystem\Tubo Fg composito -
36,20
SHEET OF
1 1 -1
REV.
16 352
www.nupigeco.com - info@nupigeco.com
1,45 1,63 63 8,6 All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
45,60
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
Dn
CODE
03TNIRV20
03TNIRV25
SDR Dn
7,4
7,4
20
25
S min
2,8
3,5
Di
14,40
18,00
Peso - Weight (Kg/m)
0,15
0,23
FIG. 13A
03TNIRV32 11 32 2,9 26,20 0,26
03TNIRV40 11 40 3,7 32,60 0,40
03TNIRV50 11 50 4,6 40,80 0,63
03TNIRV63 11 63 5,8 51,40 0,99
03TNIRV75 11 75
Q.té 6,8 61,40
Poids 1,37
Litres
Code Type Ø Emb.
8,2 73,60 1,99
Dn S min Di
03TNIRV90 11 90
03TNIRV110 11 110 10,0 90,00 2,96
03TNIRV125 11 125 palette 11,4
14,6
102,20
130,80
kg/m 3,84
6,22
l/m
03TNIRV160 11 160
03TNIRV50 11 50 20 560
www.nupigeco.com - info@nupigeco.com
0,63 C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirv - SDR11 -
VIOLA\NI10068.dwg
1,31 50 4,6
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
40,80
1 1 0
Applications: Di
HVACR
Dn2
Dn1
L1
L
CODE Dn1 Dn2 S1 min S2 min S3 min Di L1 L Peso - Weight (Kg/m)
FIG. 14A
03TNIRCBFG3274 32 90 4,4 26 3,0 23,20 220 5800 1,51
03TNIRCBFG4074 40 110 5,5 32 3,0 29,00 220 5800 1,91
03TNIRCBFG5074 50 110 6,9 27 3,0 36,20 220 5800 2,09
03TNIRCBFG6374 63 125 8,6 28 3,0 45,80 220 5800 - 11600 2,71
03TNIRCBFG6374 63
GLASS PIPE - MULTILAYER PIPE
16 352 2,71 www.nupigeco.com
1,63 63 125 8,6 28 SDR7,43,0 45,80 220 5.800-11.600
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnircbfg - SDR7,4 1 1 0
PREISOLATO\NI10069.dwg
- S 3,2 - MRS10
- info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03TNIRCBFG7574 75 12 240 3,37 2,31 75 140 10,3 29,5 3,0 54,40 220 5.800-11.600
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
03TNIRCBFG9074 90 8 160 5,28 3,32 90 160 12,3 32 3,0 65,40 220 5.800-11.600
03TNIRCBFG11074 110 8 112 6,46 4,97 110 200 15,1 41,8 3,2 79,80 220 5.800-11.600
03TNIRCBFG12574 125 4 80 9,84 6,47 125 225 17,1 46,6 3,4 90,80 220 5.800-11.600
03TNIRCBFG16074 160 4 48 13,94 10,60 160 250 21,9 41,4 3,6 116,20 220 5.800-11.600
03TNIRCBFG20074 200 4 32 21,94 16,55 200 315 27,4 53,4 4,1 145,20 220 5.800-11.600
03TNIRCBFG25074 250 4 32 34,60 25,89 250 400 34,2 70,2 4,8 181,60 220 5.800-11.600
03TNIRCBFG31574 315 4 32 45,33 39,39 315 450 42,6 62,3 5,2 229,80 220 5.800-11.600
Applications: Di
HVACR
Dn2
Dn1
L1
L
CODE Dn1 Dn2 S1 min S2 min S3 min Di L1 L Peso - Weight (Kg/m)
2,9 3,0 26,20 1,39
FIG. 14B
03TNIRCBCL3211 32 90 26 220 5800
03TNIRCBCL4011 40 110 3,7 32 3,0 32,60 220 5800 1,91
03TNIRCBCL5011 50 110 4,6 27 3,0 40,80 220 5800 2,09
03TNIRCBCL6311 63 125 5,8 28 3,0 51,40 220 5800 - 11600 2,71
SDR 11 • S 5
03TNIRCBCL7511 75 140 6,8 29,5 3,0 61,40 220 5800 - 11600 3,37
03TNIRCBCL9011 90 160 8,2 32 3,0 73,60 220 5800 - 11600 4,38
03TNIRCBCL11011 110 200 10,0 41,8 3,2 90,00 220 5800 - 11600 6,46
03TNIRCBCL12511 125 225 11,4 46,6 3,4 102,20 220 5800 - 11600 8,20
Q.té Poids 03TNIRCBCL16011 Litres 160 250 14,6 41,4 3,6 130,80 220 5800 - 11600 11,28
Code Ø Emb. 03TNIRCBCL20011 200
Dn1 315 18,2 53,4 4,1
Dn2 S1 min S2 min S3 min 163,60 220 5800 - 11600 17,70
Di L1 L
palette kg/m l/m 400 22,7
03TNIRCBCL25011 250 70,2 4,8 204,60 220 5800 - 11600 27,48
03TNIRCBCL31511 315 450 28,6 62,3 5,2 257,80 220 5800 - 11600 35,11
03TNIRCBCL3211
BARRE DA 5,8m FINO AL ø50
32 60 1.320 1,39 0,54 32
BARRE DA 5,8m E 11,6m DAL ø63 AL ø315
BAR LENGHT 5,8m UNTIL ø50
90 2,9 26 3,0 26,20 220 5.800
03TNIRCBCL4011 40 40 800 1,91 0,83 40 ITEM:110 3,7 32 3,0 32,60 220 5.800
BAR LENGHT 5,8m AND 11,6m FROM ø63 TO ø315
DRAWING No:
DESC: TUBO NIRON PPR CLIMA CARBON BLACK PREISOLATO
03TNIRCBCL5011
NI10070
50
CON FIBRA DI VETRO - TUBO COMPOSTO
20 560 2,09 1,31 50 110 4,6
TNIRCBCL_11
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnircbcl_11 - SDR11
27 3,0
GLASS PIPE - MULTILAYER PIPE 40,80
NIRON CLIMA CARBON BLACK PREISULATED PPR FIBER
220 5.800
SHEET OF
1 1 0
REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
5.800-11.600
03TNIRCBCL7511 75 12 240 3,37 2,96 75 140 6,8 29,5 3,0 61,40 220 5.800-11.600
03TNIRCBCL9011 90 8 160 4,38 4,25 90 160 8,2 32 3,0 73,60 220 5.800-11.600
03TNIRCBCL11011 110 8 112 6,46 6,36 110 200 10,0 41,8 3,2 90,00 220 5.800-11.600
03TNIRCBCL12511 125 4 80 8,20 8,20 125 225 11,4 46,5 3,4 102,20 220 5.800-11.600
03TNIRCBCL16011 160 4 48 11,28 13,43 160 250 14,6 41,4 3,6 130,80 220 5.800-11.600
03TNIRCBCL20011 200 4 32 17,70 21,01 200 315 18,2 53,4 4,1 163,60 220 5.800-11.600
03TNIRCBCL25011 250 4 32 27,48 32,86 250 400 22,7 70,2 4,8 204,60 220 5.800-11.600
03TNIRCBCL31511 315 4 32 35,11 52,17 315 450 28,6 62,3 5,2 257,80 220 5.800-11.600
Applications:
Di
HVACR
Dn2
Dn1
L1
L
CODE
03TNIRCBWBM3274
Dn1
32
Dn2 S1 min S2 min S3 min
90 4,4 26 3,0
Di
23,20
L1
220
L
5800
Peso - Weight (Kg/m)
1,51 FIG. 14C
03TNIRCBWBM4074 40 110 5,5 32 3,0 29,00 220 5800 2,09
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
Applications:
S min
Di
Dn
HVACR
FIG. 15A
03TNIRWBFG3274 32 4,4 + 0,1 OB 23,20 0,40
03TNIRWBFG4074 40 5,5 + 0,1 OB 29,00 0,61
03TNIRWBFG5074 50 6,9 + 0,1 OB 36,20 0,94
03TNIRWBFG6374 63 8,6 + 0,1 OB 45,80 1,48
SDR 7,4 • S 3,2 03TNIRWBFG9074
03TNIRWBFG11074
90
110
12,3 + 0,1 OB
15,1 + 0,1 OB
65,40
79,80
2,99
4,43
TNIRWBFG_74
03TNIRWBFG5074 50 20 560 0,94 1,03 PIPE - 50
MULTILAYER PIPE 6,9 + 0,1 OB (*) 1 1 0 36,20
NIRON OB-FG WHITE BLUE OXIGEN BARRIER PPR
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirwbfg_74 - SDR7,4
SDR7,4 - S 3,2 - MRS10
BARRIERA OX\NI10072.dwg
SHEET OF REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
HVACR
Dn
FIG. 15B
CODE Dn S min Di Peso - Weight (Kg/m)
03TNIRWBCL3211 32 2,9 + 0,1 OB 26,20 0,30
03TNIRWBCL4011 40 3,7 + 0,1 OB 32,60 0,46
03TNIRWBCL5011 50 4,6 + 0,1 OB 40,80 0,71
SDR 11 • S 5 03TNIRWBCL6311
03TNIRWBCL9011
03TNIRWBCL11011
63
90
110
5,8 + 0,1 OB
8,2 + 0,1 OB
10,0 + 0,1 OB
51,40
73,60
90,00
1,11
2,22
3,15
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirwbcl_11 - SDR11 0
BARRIERA OX\NI10073.dwg
SDR11 - S5 - MRS10
www.nupigeco.com - info@nupigeco.com
03TNIRWBCL9011 90
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
Applications:
S min
Di
HVACR
Dn
CODE
03TNIRWBM3274
Dn
32
S min
4,4 + 0,1 OB
Di Peso - Weight (Kg/m)
23,20 0,39 FIG. 15C
03TNIRWBM4074 40 5,5 + 0,1 OB 29,00 0,59
DRAWING No:
ITEM: DESC: TUBO NIRON OB-FULL CON BARRIERA OSSIGENO -
03TNIRWBM5074 50 20 560 0,91 0,91
TNIRWBM_74
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirwbm_74 - SDR7,4
50 WHITE BLUE WITH
SINGOLA PARETE
NIRON OB-FULL
PIPE - MONOLAYER PIPE
6,9OXIGEN
+ 0,1 OB (*)
BARRIER 36,20
NI10074
SHEET OF
1 1 0
REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
Dn
HVACR
CODE TYPE Dn S min Di Peso - Weight (Kg/m)
03TNIRDAFG2074 A 20 2,8 + 0,1 PE 14,20 0,17
03TNIRDAFG2574
03TNIRDAFG3274
A
A
25 3,5 + 0,1 PE 17,80
32 4,4 + 0,1 PE 23,00
0,25
0,40 FIG. 16A
03TNIRDAFG4074 A 40 5,5 + 0,1 PE 28,80 0,61
03TNIRDAFG4074 A 40 40
BAR LENGHT 4m UNTIL ø125 mm. FROM ø160 mm 5,8m BAR LENGHT
40 800ITEM: 0,61 0,66
DESC: 5,5 + 0,1 PEHDNI10075
TUBO NIRON DARK FG BLU CARICATO VETRO CON
BARRIERA PROTEZIONE RAGGI UV - TUBO COMPOSTO
(*) DRAWING No:
28,80
TNIRDAFG_74
03TNIRDAFG5074 A 50 20 560 0,93 1,03 50 6,9 + 0,1 PEHD (*) 36,00
NIRON FG DARK PPR FIBER GLASS PIPE UV RAY SHEET OF REV.
BARRIER - MULTILAYER PIPE
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirdafg_74 - SDR 7,4 1 1 0
DARK\NI10075.dwg SDR 7,4 - S 3,2 - MRS10
03TNIRDAFG6374
www.nupigeco.com - info@nupigeco.com
A 63 63
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
Applications:
S min
Di
Dn
HVACR
CODE TYPE Dn S min Di Peso - Weight (Kg/m)
03TNIRDACL329 A 32 3,6 + 0,1 PE 24,60 0,34
03TNIRDACL409 A 40 4,5 + 0,1 PE 30,80 0,53
FIG. 16B
03TNIRDACL509 A 50 5,6 + 0,1 PE 38,60 0,80
03TNIRDACL639 A 63 7,1 + 0,1 PE 48,60 1,27 TYPE A
03TNIRDACL759 A 75 8,4 + 0,1 PE 58,00 1,77
03TNIRDACL909 A 90 10,1 + 0,1 PE 69,60 2,55
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
HVACR
Dn
FIG. 16C
03TNIRDACL509 A 50 5,6 + 0,1 PE 38,60 0,80
03TNIRDACL639 A 63 7,1 + 0,1 PE 48,60 1,27 TYPE A
03TNIRDACL759 A 75 8,4 + 0,1 PE 58,00 1,77
03TNIRDACL909 A 90 10,1 + 0,1 PE 69,60 2,55
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Applications:
S min
Di
HVACR
Dn
SDR 17 • S 8 03TNIRDACL1259
03TNIRDACL1609
03TNIRDACL2009
A 125 14,0 + 0,1 PE 96,80
A 160 17,9 + 0,1 PE 124,00
B 200 22,4 + 0,1 PE 155,00
4,88
7,90
12,10
03TNIRDACL2509 B 250 27,9 + 0,1 PE 194,00 18,80
03TNIRDACL3159 B 315 35,2 + 0,1 PE 244,40 29,60
Q.té Poids Litres
Code Type Ø Emb.
03TNIRDACL3559 B 355 39,7 + 0,1 PE 275,40 37,60
Dn TYPE B S min Di
palette kg/m l/m
03TNIRDACL4009 B 400 44,7 + 0,1 PE 310,40 47,50
03TNIRDACL16017 A 160 4
TYPE A : TUBO MULTISTRATO - MULTILAYER PIPE 48 4,73
TYPE B: TUBO MONOPARETE CARICATO AL 6% - MONOLAYER PIPE 6% FIBER RENFORCED
15,61 160 9,5 + 0,1 PEHD (*) 140,80
03TNIRDACL20017 B 200 4
BARRE DA 4m FINO ø125 mm. DA ø160 BARRE DA 5,8m
BAR LENGHT 4m UNTIL ø125 mm. FROM ø160 mm 5,8m BAR LENGHT 32 7,01 24,37 200 11,9 + 0,1 PEHD (*)
DRAWING No:
176,00
ITEM: DESC: TUBO NIRON DARK FIBER CARICATO VETRO CON
1 1
REV.
0
220,20
03TNIRDACL31517 B 315 315
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirdacl_9 - SDR9 DARK
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
03TNIRDACL35517 B 355 4 32 21,58 76,81 355 21,1 + 0,1 PEHD (*) 312,60
03TNIRDACL40017 B 400 4 32 27,28 97,60 400 23,7 + 0,1 PEHD (*) 352,40
(*) Polyéthylène haute densité
Applications:
S min
Di
Dn
03TNIRPLP6374•
NI10079
63 63
POTABILE - TUBO COMPOSTO
16 352 1,39 TNIRPLP_74
2,31 C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Tnirplp_74 - SDR 7,4
BARRIER - MULTILAYER PIPE8,7 + 0,1 BC (*)
NIRON FULL PLATINUM POTABLE PPR PIPE CHEMICAL
45,40
SHEET OF
1 1 0
REV.
SDR7,4 - S 3,2
03TNIRPLP9074• 90 90
PLATINUM POT\NI10079.dwg
8 160 2,83
www.nupigeco.com - info@nupigeco.com
3,32 12,5 + 0,1 BC (*)
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
64,80
03TNIRPLP11074• 110 8 112 4,25 4,97 110 15,2 + 0,1 BC (*) 79,40
• Disponible seulement sur demande
(*) Barrière chimique
Applications:
S min
Di
Dn
Dn
D
H
L1
FIG. 211
DOS D’ANE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø20 ÷ ø32 mm
H
H1
Dn
S
FIG. 212
H
Dn2
H1
Dn1
L1 L2
L
FIG. 212A
L1 L2
L
FIG. 212B
Polysystem
D
Dn
D1
H
Matériel: PPR
H1
Normes: DIN 16962 - UNI EN ISO 15874
L1
L2 Gamme: ø16 ÷ 630 mm
L
Notes: Type B - *Raccord M/M (SDR11) pour soudure
(B) bout-à-bout ou avec manchon électrique
Type C - Raccord à secteurs
Dn
S
H
H1
L1
L2
L
90
°
(C)
Dn
S
H
H1
L1
L2
L
FIG. 213
90
°
Dn
S
H
H1
L1
L2
L
CODE Dn S L1 L2 L H1 H
03NGD160
03NGD200
160
200
9,5 150
11,9 150
390
450
470
550
390
450
470
550
FIG. 213A
03NGD250 250 14,8 250 625 750 625 750
03NGD315 315 18,7 300 773 930,5 773 930,5
NIRON
03NGD355 355 21,1 300 Q.té 1010,5Poids
833 Volume
833 1010,5
03NGD400 Ø
400 23,7Emb.
300 900 1100 900 1100 Dn S L1 L2 L H1 H
Code palette kg/p m3/p.
03NGD160 160 1 1 - - 160 9,5 150 390 470 390 470
DRAWING No:
Polysystem
(A)
COUDE 90° FILET FEMELLE
D1
D
F
H
H1
L1
LF min Dn
Matériel: PPR - Laiton
L2 Normes: DIN 16962 - UNI EN ISO 15874
L
Gamme: ø16x1/2” ÷ ø63x2” mm
(B)
D1
D
F
H
H1
L1
LF min Dn
L2
L
(C)
LCH
CH
D
D1
F
H
H1
L1
LF min Dn
L2
L
FIG. 213B
Polysystem
D
F
D1
H
H1
L1
LF min Dn
L2
L
FIG. 213C
H
H2
D
D1
F
H1
L1
LF min Dn
L2
L
FIG. 213D
D2
D1
D
F
H
H1
L1
LF min Dn
L2 L3
L L4
FIG. 213E
2
D
D
F
D1
H
H1
L1
LF min Dn
L2 L3
L L4
FIG. 213F
D1 L4 L3
H3
H2
L
L1 L2
H1
H
FIG. 214
B B
H
FIG. 214A
Polysystem
F
D
D1
H
H1
L1
LF min Dn
L2
L
FIG. 214B
D1
H
H1
L1
LF min Dn
L2
L
FIG. 214C
Polysystem
int. B
for for int. C
o 1 int. A o2
H1
int. D
int. E
L
L1 L2
FIG. 214D
L
L1
int. A H1
foro
C A C A A C A C
H
B B B B
FIG. 214E
Polysystem
Dn2
D1
D
H
H1
L1
Dn1
L2
L
FIG. 213G
D1
F
H
H1
L1
LF min Dn
L2
L
FIG. 213H
(A)
COUDE 45°
D
n
D
1
D
Matériel: PPR
H
Normes: DIN 16962 - UNI EN ISO 15874
H1
L1
L
Gamme: ø16 ÷ ø630 mm
Notes: T ype B - Raccord M/M (SDR11) pour soudure bout-à-
(B) bout ou avec manchon électrique
n
D
H
H1
L1
L
S n
D
(C)
H
H1
L1
L
FIG. 215
S n
D
H1
L1
FIG. 215A
CODE Dn S L1 H1
03NCD45160 160 9,5 150 249
03NCD45200 200 11,9 150 274
NIRON
03NCD45250 250 14,8 250 412 Q.té Poids Volume
Ø Emb. Dn S L1 H1
Code
03NCD45315
03NCD45355
315
355
18,7
21,1
300
300
498
520
palette kg/p m3/p.
23,7
03NCD45160
03NCD45400
160 400
1 300 548
1 - - 160 9,5 150 249
03NCD45200 200 1 1 - - 200 11,9 150 274
03NCD45250 250
ITEM: 1 DESC:1 CURVA A 45° - - 250 14,8
DRAWING No:
250 412
NCD NI10101
03NCD45315 315 1 1 45° SDR17
ELBOW
- - 315 18,7
SHEET OF REV.
300 498
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncd - SDR17\NI10101.dwg 1 1 0
03NCD45355
www.nupigeco.com - info@nupigeco.com355 1 All dimensions1 - with 5% tolerance-if not otherwise mentioned
have to be considered in millimeters 355 21,1 300 520
03NCD45400 400 1 1 -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
- 400 23,7 300 548
Polysystem
D
n2
D
L2
H
L1
Dn1
L
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
(A)
TÉ 90°
D
Dn
D1
H
H1
Matériel: PPR
L1
L2
Normes: DIN 16962 - UNI EN ISO 15874
L
Gamme: ø16 ÷ ø630 mm
(B)
Notes: T ype B - Raccord M/M (SDR11) pour soudure
bout-à-bout ou avec manchon électrique
Type C - Raccord à secteurs
Dn
S
H
H1
L1
L2
L
(C)
Dn
S
H
H1
L1
L2
L
FIG. 216
TÉ 90° - SDR 17
Matériel: PPR
Normes: DIN 16962
Gamme: ø160 ÷ ø400 mm
Notes: Raccord à secteurs
Dn
S
H
H1
L1
L2
L
FIG. 216A
Polysystem
TÉ FILET FEMELLE
Matériel: PPR - Laiton
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø16x1/2”x16 ÷ ø32x1”x32 mm
(A) (B)
L1 L1
Dn
D
D
Dn
H
H
H1
H1
D1
LF min
D1
LF min
F F
D2 D2
L2 L2
L L
FIG. 216B
Polysystem
TÉ FILET MÂLE
Matériel: PPR - Laiton
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø16x1/2”x16 ÷ ø32x1”x32 mm
(A) L1 (B) L1
Dn
D
Dn
D
H
H
H1
H1
D1
LF min
D1
LF min
F F
D2 D2
L2 L2
L L
FIG. 216C
Polysystem
TÉ RÉDUITE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø16-20-16 ÷ ø315-160-315 mm
Notes: T ype E - Raccord à secteurs - Raccord M/M (SDR11) pour soudure
bout-à-bout ou avec manchon électrique
Dn3
D3
Dn3
D3
Dn1
D
D1
D
Dn1
Dn1
D
Dn3
H
D1
D1
D3
H
H1
H1
H1
L2
L2
D2
L2
Dn2 D2
D2
L1 D4 L3 Dn2
Dn2
L D4
D4
L
L
(D) (E)
L1 L3
Dn3
Dn1
Dn3
S1
D3
H
Dn1
D
D1
H1
H
H1
L2
L2
D2
D2
S2
Dn2
Dn2
D4
L1 L3
L
L
CODE
03NTR25075250
Dn1
250
Dn2
75
Dn3 S1
250 22,7
S2
6,8
D1 D2
- 59,8
D3
-
D4
-
D
L1 L2 L3
-
L H1 H
262,5 82 262,5 600 230 355 FIG. 216D
03NTR25090250 250 90 250 22,7 8,2 - 73,6 - - -
255 78 255 600 234 359
03NTR250110250 250 110 250 22,7 10 - 90 - - -
245 82 245 600 240 365
03NTR250125250 250 125 250 22,7 11,4 - 102,2 - - -
237,5 100 237,5 600 268 393
250 22,7 14,6 - 130,8 - - -
NIRON POLYSYSTEM Q.té Poids Volume
03NTR250160250 250 160 220 97 220 600 260 385
03NTR31575315 315 75 315 28,6 6,8 - 59,8 - - -
362,5 82 362,5 800 262,5 420
Type Ø Emb. Dn1 Dn2 Dn3 D103NTR31590315 315 90 D2 315 28,6 D3 D4 8,2 - 73,6 D - L1 L2 L3
- -
355 78 355 800 266,5 424 L H1 H
Code Code palette kg/p m3/p. 03NTR315110315
03NTR315125315
315
315
110
125
315 28,6
315 28,6
10
11,4
- 90
- 102,2
-
-
-
-
-
345 82 345 800 272,5 430
-
337,5 100 337,5 800 300,5 458
03NTR315160315 315 160 315 28,6 14,6 - 130,8 - - -
320 97 320 800 292,5 470
03NTR162016 16V6409A A 16x20x16 150 7.200 0,029 0,0001 16 20 16 13,5 14ITEM:13,5 29 29 14 16 14 53 27 42
NTR
DESC: RACCORDI A TEE RIDOTTO DRAWIN
NI100
REDUCED TEE
03NTR201616 16V6409B B 20x16x16 150 7.200 0,029 0,0001 20 16 16 14 13,5 13,5 29 29 16 14 14 53 27 42
SHEET OF
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntr\NI10000.dwg 7 7
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NTR201620 16V6409 A 20x16x20 150 7.200 0,028 0,0001 20 16 20 16,5 13,5 16,5 29 29 16 14 16 53 27 42
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
...
RACCORDS DE COLEUR BLEU CLAIR RACCORDS DE COULEUR VERT
TÉ RÉDUITE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø16-20-16 ÷ ø315-160-315 mm
Notes: T ype E - Raccord à secteurs - Raccord M/M (SDR11) pour
soudure bout-à-bout ou avec manchon électrique
Dn3
D3
Dn3
D3
Dn1
D
D1
D
Dn1
Dn1
D
Dn3
H
D1
D1
D3
H
H1
H1
H1
L2
L2
D2
L2
Dn2 D2
D2
L1 D4 L3 Dn2
Dn2
L D4
D4
L
L
(D) (E)
L1 L3
Dn3
Dn1
Dn3
S1
D3
H
Dn1
D
D1
H1
H
H1
L2
L2
D2
D2
S2
Dn2
Dn2
D4
L1 L3
L
L
CODE
03NTR25075250
Dn1
250
Dn2
75
Dn3 S1
250 22,7
S2
6,8
D1 D2
- 59,8
D3
-
D4
-
D
L1 L2 L3
-
L H1 H
262,5 82 262,5 600 230 355
FIG. 216D
03NTR25090250 250 90 250 22,7 8,2 - 73,6 - - -
255 78 255 600 234 359
03NTR250110250 250 110 250 22,7 10 - 90 - - -
245 82 245 600 240 365
03NTR250125250 250 125 250 22,7 11,4 - 102,2 - - -
237,5 100 237,5 600 268 393
NIRON POLYSYSTEM Q.té Poids Volume 03NTR250160250 250 160 250 22,7 14,6 - 130,8 - - -
220 97 220 600 260 385
Type Ø Emb. Dn1 Dn2 Dn3 D1
03NTR31575315 315 75
D2 315 28,6
D3 6,8
D4 - 59,8
- 73,6 D -
- L1 -
-
-
L2
362,5 82 362,5 800 262,5 420
- L3 L H1 H
Code Code palette kg/p m3/p. 315 28,6
03NTR31590315 315 90 8,2 355 78 355 800 266,5 424
03NTR315110315 315 110 315 28,6 10 - 90 - - -
345 82 345 800 272,5 430
03NTR315125315 315 125 315 28,6 11,4 - 102,2 - - -
337,5 100 337,5 800 300,5 458
03NTR502050 16V6420 A 50x20x50
- 130,8 - - -
12 1.056 0,158 0,0006 50 20 50 47 16,5 47 43 66 315 28,6
26 16 26 87 47 80
03NTR315160315 315 160 14,6 320 97 320 800 292,5 470
ITEM: DESC: RACCORDI A TEE RIDOTTO
NTR
03NTR502550 16V6421 A 50x25x50
REDUCED TEE
10 880 0,160 0,0008 50 25 50 47 21 47 43 66
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntr\NI10000.dwg
26 20 26 87 47 80
03NTR503250 16V6422 A 50x32x50 10 880 0,150 0,0008 50 32 50 47 30 47 43 66 26 20 26 87 47 80
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
TÉ RÉDUITE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø16-20-16 ÷ ø315-160-315 mm
Notes: T ype E - Raccord à secteurs - Raccord M/M (SDR11) pour soudure
bout-à-bout ou avec manchon électrique
(A) (B) L1 L3 (C) L1 L3
Dn3
Dn3
D3
D3
Dn1
D
Dn1
D1
Dn1
D
Dn3
H
D1
D1
D3
H
H1
H1
H1
L2
L2
D2
L2
Dn2 D2 D2
L1 D4 L3 Dn2 Dn2
D4 D4
L
L L
(D) (E)
L1 L3
Dn3
Dn1
Dn3
S1
D3
H
Dn1
D
D1
H1
H
H1
L2
L2
D2 D2
Dn2 S2
D4 Dn2
L L1 L3
FIG. 216D
L
CODE Dn1 Dn2 Dn3 S1 S2 D1 D2 D3 D4 D
L1 L2 L3 L H1 H
03NTR25075250 250 75 250 22,7 6,8 - 59,8 - - -
262,5 82 262,5 600 230 355
03NTR25090250 250 90 250 22,7 8,2 - 73,6 - - -
255 78 255 600 234 359
03NTR250110250 250 110 250 22,7 10 - 90 - - -
245 82 245 600 240 365
NIRON Q.té Poids Volume 03NTR250125250 250 125 250 22,7
250 22,7
11,4
14,6
- 102,2
- 130,8
-
-
-
-
-
237,5 100 237,5 600 268 393
-
Type Ø Emb. Dn1 Dn2 Dn3 S1 S2 D1 D2 D3 D4 D L1 L2 L3 L H1 H
03NTR250160250 250 160 220 97 220 600 260 385
03NTR31575315 315 75 315 28,6 6,8 - 59,8 - - -
362,5 82 362,5 800 262,5 420
Code palette kg/p m3/p. 03NTR31590315
03NTR315110315
315
315
90
110
315 28,6
315 28,6
8,2
10
- 73,6
- 90
-
-
-
-
-
355 78 355 800 266,5 424
-
345 82 345 800 272,5 430
03NTR315125315 315 125 315 28,6 11,4 - 102,2 - - -
337,5 100 337,5 800 300,5 458
03NTR12590125 A 125x90x125 1 48 2,700 0,0168 125 90 125 113 85 113 122 165 47,5 37 47,5 250 115 197,5 115 197,5
03NTR315160315 315 160 315 28,6 14,6 - 130,8 - - -
320 97 320 800 292,5 470
DRAWING N
ITEM: DESC: RACCORDI A TEE RIDOTTO
03NTR125110125 A 125x110x125 1 48 2,600 0,0168 125 110 125 113 100 113 146 165 47,5 NTR
43 47,5 250 120 202,5 120 202,6 REDUCED TEE
NI10000
SHEET OF RE
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntr\NI10000.dwg 7 7 -1
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
03NTR16090160 E 160x90x160 9 36 4,766 0,0240 160 90 160 14,6 8,2 - 73,6 - - - 180 78 180 450 189 269
03NTR160110160 E 160x110x160 9 36 4,977 0,0240 160 110 160 14,6 10 - 90 - - - 170 82 170 450 195 275
03NTR160125160 E 160x125x160 1 - - - 160 125 160 14,6 11,4 - 102,2 - - - 162,5 100 162,5 450 223 303
03NTR20075200 E 200x75x200 1 - - - 200 75 200 18,2 6,8 - 59,8 - - - 235,5 82 235,5 550 205 305
03NTR20090200 E 200x90x200 1 - 3,900 - 200 90 200 18,2 8,2 - 73,6 - - - 230 78 230 550 209 309
03NTR200110200 E 200x110x200 1 - 4,500 - 200 110 200 18,2 10 - 90 - - - 245 82 245 600 215 315
03NTR200125200 E 200x125x200 1 - - - 200 125 200 18,2 11,4 - 102,2 - - - 237,5 100 237,5 600 243 343
03NTR200160200 E 200x160x200 1 - - - 200 160 200 18,2 14,6 - 130,8 - - - 220 97 220 600 235 335
03NTR25075250 E 250x75x250 1 - - - 250 75 250 22,7 6,8 - 59,8 - - - 262,5 82 262,5 600 230 355
03NTR25090250 E 250x90x250 1 - - - 250 90 250 22,7 8,2 - 73,6 - - - 255 78 255 600 234 359
03NTR250110250 E 250x110x250 1 - - - 250 110 250 22,7 10 - 90 - - - 245 82 245 600 240 365
03NTR250125250 E 250x125x250 1 - - - 250 125 250 22,7 11,4 - 102,2 - - - 237,5 100 237,5 600 268 393
03NTR250160250 E 250x160x250 1 - - - 250 160 250 22,7 14,6 - 130,8 - - - 220 97 220 600 260 385
03NTR31575315 E 315x75x315 1 - - - 315 75 315 28,6 6,8 - 59,8 - - - 362,5 82 362,5 800 262,5 420
03NTR31590315 E 315x90x315 1 - - - 315 90 315 28,6 8,2 - 73,6 - - - 355 78 355 800 266,5 424
03NTR315110315 E 315x110x315 1 - - - 315 110 315 28,6 10 - 90 - - - 345 82 345 800 272,5 430
03NTR315125315 E 315x125x315 1 - - - 315 125 315 28,6 11,4 - 102,2 - - - 337,5 100 337,5 800 300,5 458,
03NTR315160315 E 315x160x315 1 - - - 315 160 315 28,6 14,6 - 130,8 - - - 320 97 320 800 292,5 470
Polysystem
TÉ RÉDUITE TARAUDÉE
Matériel: PPR - Aluminium
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø160-75-160 ÷ ø315-125-315 mm
Notes: Raccord fabriqué(*) à bride - M/M (SDR11) pour soudure
bout-à-bout ou par électrofusion
(*) Bride en aluminium 00FLAALPV (EN 1092)
L
Dn3
Dn1
S1
H
H1
D3
L1
S2
D1
Dn2
D2
D
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentione
03NTFLA160110160 160x110x160 1 - - - 160 110 160 14,6 90,0 180 18 8 M16 220 22 129 450 209 289
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
03NTFLA160125160 160x125x160 1 - - - 160 125 160 14,6 102,2 190 18 8 M16 230 22 158 450 238 318
03NTFLA20075200 200x75x200 1 - - - 200 75 200 18,2 59,8 145 18 4 M16 185 20 117 550 217 317
03NTFLA20090200 200x90x200 1 - - - 200 90 200 18,2 73,6 160 18 8 M16 200 22 118 550 218 318
03NTFLA200110200 200x110x200 1 - - - 200 110 200 18,2 90,0 180 18 8 M16 220 22 129 600 229 329
03NTFLA200125200 200x125x200 1 - - - 200 125 200 18,2 102,2 190 18 8 M16 230 22 158 600 258 358
03NTFLA25075250 250x75x250 1 - - - 250 75 250 22,7 59,8 145 18 4 M16 185 20 117 600 242 367
03NTFLA25090250 250x90x250 1 - - - 250 90 250 22,7 73,6 160 18 8 M16 200 22 118 600 243 368
03NTFLA250110250 250x110x250 1 - - - 250 110 250 22,7 90,0 180 18 8 M16 220 22 129 600 254 378
03NTFLA250125250 250x125x250 1 - - - 250 125 250 22,7 102,2 190 18 8 M16 230 22 158 600 283 408
03NTR31575315 315x75x315 1 - - - 315 75 315 28,6 59,8 145 18 4 M16 185 20 117 800 274 432
03NTR31590315 315x90x315 1 - - - 315 90 315 28,6 73,6 160 18 8 M16 200 22 118 800 275 433
03NTR315110315 315x110x315 1 - - - 315 110 315 28,6 90,0 180 18 8 M16 220 22 129 800 286 444
03NTR315125315 315x125x315 1 - - - 315 125 315 28,6 102,2 190 18 8 M16 230 22 158 800 315 473
Polysystem
CROIX RÉDUITE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø40-20-20-40 ÷ ø40-25-25-40 mm
L2
Dn2
D3
D2
H
H1
L1
D1
Dn1
D
L3
L
FIG. 217
NIRON
CODE POLYSYSTEM
Dn1 Dn2 D1 D2 D3 D L1 L2 Q.té L H1
L3 Poids H Volume
36 16,5 Ø33 Emb.16 Dn1 Dn2 D1 D2 D3 D L1 L2 L3 L H1 H
Code
03NCR402525 Code
03NCR402020 40
40
20
25 36 23,5 33
53
53
22
22 16 palette kg/p 80 m3/p.
37 74 40 80
37 74 40
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncr\NI10030.dwg 1 1 0
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
D
Dn
D1
H
H1
L1
L2
L
FIG. 218
DRAWING No:
ITEM: DESC: CURVA A TRE VIE
NCTV SIDE ELBOW THREE OUT
NI10031
SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nctv\NI10031.dwg 1 1 0
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
RÉDUCTION FEMELLE/FEMELLE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø20-16 ÷ ø160-125 mm
D
D
Dn2
Dn1
D1
Dn2
Dn2
Dn1
Dn1
S1
S1
S1
RÉDUCTION FEMELLE/FEMELLE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø20-16 ÷ ø160-125 mm
D
D
Dn2
Dn1
D1
Dn2
Dn2
Dn1
Dn1
S1
S1
S1
3 3
REV.
0
REDUCING SOCKET SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nr\NI10032.dwgSHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nr\NI10032.dwg
www.nupigeco.com - info@nupigeco.com 2 3 0
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
0032.dwg 1 3 0
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
FIG. 219
formation on this document are subject to change without notice
Polysystem
Dn1
Dn2
S2
S1
12
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nrmm\NI10033.dwg 576 FITTINGS0,225 0,0014 75 6,8 63 1 1 5,8-1 71 64 150
03NRMM9050 -
www.nupigeco.com - info@nupigeco.com
90/50 12 576 0,250 0,0014 90 8,2
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
50 4,6 73 57 152
03NRMM9063 - 90/63 12 576 0,260 0,0015 90 8,2 63 5,8 71 57 150
03NRMM9075 - 90/75 9 432 0,333 0,0019 90 8,2 75 6,8 81 72 175
03NRMM11063 - 110/63 6 288 0,426 0,0029 110 10 63 5,8 85 70 175
03NRMM11075 - 110/75 6 288 0,470 0,0029 110 10 75 6,8 88 58 185
03NRMM11090 - 110/90 6 288 0,473 0,0029 110 10 90 8,2 78 70 175
03NRMM12575 - 125/75 3 144 0,650 0,0059 125 11,4 75 6,8 92 60 199
03NRMM12590 - 125/90 4 192 0,615 0,0042 125 11,4 90 8,2 86 70 186
03NRMM125110 - 125/110 4 156 0,690 0,0050 125 11,4 110 10 89 77 187
03NRMM16090 - 160/90 1 1 - - 160 14,6 90 8,2 108 90 230
03NRMM160110 - 160/110 1 1 - - 160 14,6 110 10 103 88 315
03NRMM160125 - 160/125 1 1 - - 160 14,6 125 11,4 102 91 214
03NRMM200160 - 200/160 22 88 2,182 0,0098 200 18,2 160 14,5 118 101 240
03NRMM250200 - 250/200 1 1 - - 250 22,7 200 18,2 130 115 280
03NRMM315250 - 315/250 1 1 - - 315 28,6 250 22,7 152 131 305
Polysystem
MANCHON
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø16 ÷ ø125 mm
D
Dn
D1
L1
L
CODE Dn D1 D L1 L
03NMAN16 16 15 24,5 16 34
03NMAN20 20 18 29 17 35
03NMAN25 25 20 35 18 39
03NMAN32 32 30 46 20 43 FIG. 219B
03NMAN40 40 37 56 22 48
03NMAN50 50 47 70 25 54
03NMAN63 63 60 88 29 62
03NMAN75 NIRON 75 POLYSYSTEM
70 101 33 71 Q.té Poids Volume
03NMAN90 90 87,5 114,5 Ø 37 Emb.77 Dn D1 D L1 L
Code 110
03NMAN110 Code
106 151 43 92 palette kg/p m3/p.
03NMAN125 125 117 160 47,5 102
03NMAN16 16V6101 16 150 13.200 0,011 0,0001 16 15 24,5 16 34
03NMAN20 16V6102 20 300 14.400 0,014 0,0001 20
DRAWING No:
18 29 17 35
ITEM: DESC: MANICOTTO
03NMAN25 16V6103NMAN 25 150
SOCKET 7.200 0,020 0,0001 25NI10034
SHEET OF REV.
20 35 18 39
03NMAN32 16V6104 32
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nman\NI10034.dwg
40 3.520 0,041 0,0002 321 1 0 30 46 20 43
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NMAN40 16V6105 40 50 2.400
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
0,062 0,0003 40 37 56 22 48
03NMAN50 16V6106 50 20 1.760 0,110 0,0004 50 47 70 25 54
03NMAN63 16V6107 63 10 880 0,190 0,0008 63 60 88 29 62
03NMAN75 - 75 6 528 0,283 0,0014 75 70 101 33 71
03NMAN90 - 90 10 480 0,310 0,0017 90 87,5 114,5 37 77
03NMAN110 - 110 4 192 0,825 0,0042 110 106 151 43 92
03NMAN125 - 125 4 192 0,900 0,0042 125 117 160 47,5 102
Polysystem
(A)
UNION FILET FEMELLE
Dn
D1
D
F
Matériel: PPR - Laiton
LF min L1 Normes: DIN 16962 - UNI EN ISO 15874
L
Gamme: ø16 x 1/2” ÷ ø125x4” mm
(B) LCH
CH
D
D1
Dn
F
LF min L1
L
LCH
(C)
CH
D
D1
Dn
F
LF min L1
L
FIG. 219C
(A)
UNION FILET MÂLE
D1
Dn
D
F
Matériel: PPR - Laiton
LF min L1 Normes: DIN 16962 - UNI EN ISO 15874
L
Gamme: ø16 x 1/2” ÷ ø125x4” mm
LCH
(B) CH
D
D1
Dn
F
LF min L1
L
(C) LCH
CH
D
D1
Dn
F
LF min L1
L
FIG. 219D
Polysystem
Dn
D1
D
D2
S
F
LF min
L1
L
FIG. 219E
03NGSF9034 90 4,2 3/4" 13,2 25 16,6 42 30 46,7
03NGSF11034 110 4,2 3/4" 13,2 25 16,6 42 30 49,7
NIRON
03NGSF631 63POLYSYSTEM
5,4 1" 18 32 21,2 54Q.té 37 Poids
57,3 Volume
5,4 Ø Emb.
21,2 kg/p
54,3 Dn S F LF min D1 D2 D L1 L
Code
03NGSF751
03NGSF901
75
90
Code
5,4
1"
1"
18
18
32
32 21,2
palette 37
54
54
37
55,4
m3/p.
5,4 21,2 57,7
03NGSF4012 -
03NGSF1101 110
40/25 x ½” 1"
70 6.160 18
0,073 0,0001 40 4,2 32 54 37
½” 11,5 25 14,1 36 28 39,5
03NGSF5012 - ITEM: 50/25 x ½” 70
DESC: 6.720
GIUNTO A 0,073
SELLA FILETTATO 0,0001 50 4,2 ½” 11,5 25 14,1
DRAWING No:
36 28 39,5
NGSF FEMMINA
NI10042
03NGSF6312 16V6901 63/25 x ½” 70 6.160
FEMALE THREADED 0,064 0,0001 PIPE UNION 63 4,2
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ngsf\NI10042.dwg
½” 11,5 25
1 1 0
SHEET OF REV.
14,1 37 30 46,5
03NGSF7512
www.nupigeco.com -
- info@nupigeco.com 75/25 x ½”All dimensions
70 have to6.160
be considered in 0,063 0,0001
millimeters with 5% 75 mentioned
tolerance if not otherwise 4,2 ½” 11,5 25 14,1 37 30 45
03NGSF9012 - 90/25 x ½” 70 3.360 0,064 0,0002 90 4,2
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
½” 11,5 25 14,1 37 30 46,7
03NGSF11012 - 110/25 x ½” 70 6.160 0,060 0,0001 110 4,2 ½” 11,5 25 14,1 37 30 49,3
03NGSF5034 - 50/25 x ¾” 60 5.280 0,116 0,0001 50 4,2 ¾” 13,2 25 16,6 43,5 41,5 52
03NGSF6334 16V6902 63/25 x ¾” 50 4.400 0,095 0,0001 63 4,2 ¾” 13,2 25 16,6 42 30 46,5
03NGSF7534 - 75/25 x ¾” 70 6.160 0,094 0,0001 75 4,2 ¾” 13,2 25 16,6 42 30 45
03NGSF9034 - 90/25 x ¾” 70 6.720 0,095 0,0001 90 4,2 ¾” 13,2 25 16,6 42 30 46,7
03NGSF11034 - 110/25 x ¾” 50 4.400 0,096 0,0002 110 4,2 ¾” 13,2 25 16,6 42 30 49,7
03NGSF631 - 63/32 x 1” 30 2.640 0,168 0,0003 63 5,4 1” 18 32 21,2 54 37 57,3
03NGSF751 - 75/32 x 1” 30 2.640 0,167 0,0003 75 5,4 1” 18 32 21,2 54 37 54,3
03NGSF901 - 90/32 x 1” 30 2.640 0,165 0,0003 90 ,5,4 1” 18 32 21,2 54 37 55,4
03NGSF1101 - 110/32 x 1” 30 2.640 0,166 0,0003 110 5,4 1” 18 32 21,2 54 37 57,7
Polysystem
RACCORD CAVALIER
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø 50/25 x 20 ÷ ø 160/63 x 63 mm
(A) (B)
Dn1
1
Dn
Dn2
D2
D1
D
S
D1
D
Dn2
S
L1
L2 L1
L L2
L
FIG. 219F
Polysystem
(A)
BOUCHON
D
Dn
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
S
L1
CODE Dn S D L1 L
L
Gamme: ø16 ÷ ø630 mm
NCC16 16 2,7 23,5 13,5 24
NCC20
NCC25
20
25
3,4
4,2
30
35,5
17
18
29
34
(B) Notes: Type B - Raccord M/M (SDR11) pour soudure
NCC32
NCC40
32
40
5,4
6,7
45
54
20
22
40
42 bout-à- bout ou avec manchon électrique
NCC50 50 8,3 66 25,5 48
NCC63 63 10,5 83 34 56
Dn
NCC75 75 12,5 99 43 61
NCC90 90 15 119 34 68
NCC110 110 18,3 147 37 79
NCC125 125 20,8 162 40 87 S
DRAWING No:
ITEM: DESC: CALOTTA DI CHIUSURA L1
NCC END CAP
NI10044
SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncc\NI10044.dwg
L 1 3 -2
eco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
(C)
Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
CODE Dn S D L1 L
NCC160 160 14,8 - 117 145
NCC200 200 19,6 - 145 175
DRAWING No:
ITEM: DESC: CALOTTA DI CHIUSURA
Dn
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncc\NI10044.dwg 2 3 -2
CODE Dn S D L1 L
FIG. 219G
upigeco.com - info@nupigeco.com 22,7 - -
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
3NCC250 250 80 L
3NCC315 315
served - Drawing cannot be reproduced in anyway, failure todo28,6 - action. Information -on this document are subject
so will entitle nupigeco to legal 80 to change without notice
3NCC355 355 32,2 - - 80
3NCC400 400 36,3 - - 80
3NCC450 450 40,9 - - 100
3NCC500 500 45,4 - - 100
3NCC560 560 NIRON 50,8 -
POLYSYSTEM - 100 Q.té Poids Volume
3NCC630 630 57,2 - - 100
Type Ø Emb. kg/p Dn S D L1 L
Code Code palette m3/p.
03NCC16 16V6601 A 16 250 24.000 0,010 0,0003 16 2,7 23,5 13,5 24
03NCC20ITEM: 16V6602
NCC A
DESC: CALOTTA DI CHIUSURA
END CAP
20 200 17.600 NI100440,011 DRAWING No:
0,0004 20 3,4 30 17 29
03NCC25 16V6603 25
SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncc\NI10044.dwg SDR 11
A 130 11.440 3 3 0,018
-2
0,0001 25 4,2 35,5 18 34
upigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NCC32 16V6604 A
served - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
32 70 6.160 0,036 0,0001 32 5,4 45 20 40
03NCC40 16V6605 A 40 50 4.400 0,048 0,0002 40 6,7 54 22 42
03NCC50 16V6606 A 50 25 2.200 0,076 0,0003 50 8,3 66 25,5 48
03NCC63 16V6607 A 63 14 1.232 0,161 0,0006 63 10,5 83 34 56
03NCC75 - A 75 8 704 0,250 0,0010 75 12,5 99 43 61
03NCC90 - A 90 6 440 0,383 0,0014 90 15 119 34 68
03NCC110 - A 110 4 352 0,663 0,0021 110 18,3 147 37 79
03NCC125 - A 125 5 240 0,850 0,0034 125 20,8 162 40 87
03NCC160 - B 160 16 192 1,197 0,0050 160 14,8 - 117 145
03NCC200 - B 200 24 96 2,137 0,0090 200 19,6 - 145 175
03NCC250 - C 250 1 - - - 250 22,7 - - 80
03NCC315 - C 315 1 - - - 315 28,6 - - 80
03NCC355 - C 355 1 - - - 355 32,2 - - 80
03NCC400 - C 400 1 - - - 400 36,3 - - 80
03NCC450 - C 450 1 - - - 450 40,9 - - 100
03NCC500 - C 500 1 - - - 500 45,4 - - 100
03NCC560 - C 560 1 - - - 560 50,8 - - 100
03NCC630 - C 630 1 - - - 630 57,2 - - 100
Polysystem
5.2.2 VALVES
H1
H
Dn
D1 L1
L
FIG. 221A
DRAWING No:
ITEM: DESC: RUBINETTO A SFERA ESTRAIBILE
NRS COMPLETA DI ROSONE E PROLUNGA
NI10035
SHEET OF REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
BILLE DE RECHANGE
Matériel: Acier - Laiton
Gamme: ø20 ÷ ø32 mm
FIG. 221C
RALLONGE
Matériel: Acier
Gamme: ø20 ÷ ø32 mm
FIG. 221D
FIG. 221E
FIG. 221F
Polysystem
Polysystem
H1
GREEN PPR PIPE
H
Dn
D
H2
L1
L
ROBINET À BILLE 2 VOIES
D H1 H2 H
54 54 29 83 Matériel: PPR
65 65 34,5 99,5
73 69,5 39 108,5 Normes: DIN 16962
86 82,5 46 128,5
98 89 52 141 Gamme: ø20 ÷ ø110 mm
122 108 62 170
162 164 87 251 L2
202 177 105 282
236 195 129 324
H1
DRAWING No:
DESC: VALVOLA A SFERA 2 VIE ATTACCHI
H
NI10065
FEMMINA CON MANIGLIA
Dn
D
SHEET OF REV.
ERGONOMICA 1 1 0
H2
mensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
0
86 82,5 46 128,5
03NRSPPVKD050 50 1
www.nupigeco.com - info@nupigeco.com
- - - 50 40 10 108 117
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
164 98 89 52 141
03NRSPPVKD063 63 1 - - - 63 50 10 134 144 199 122 108 62 170
03NRSPPVKD075 75 1 - - - 75 65 10 225 153 213 162 164 87 251
03NRSPPVKD090 90 1 - - - 90 80 10 327 173 239 202 177 105 282
03NRSPPVKD110 110 1 - - - 110 100 10 385 199 268 236 195 129 324
Polysystem
H
Dn
L1
L
CODE
03NRSPP20
Dn
20
L1
16
L2
84,5
L
73,5
H
74
FIG. 222A
03NRSPP25 25 17 84,5 77,5 74
03NRSPP32 32 20 108 89 92
03NRSPP40 40 22 108 97,5 105
NIRON POLYSYSTEM Q.té Poids Volume
Ø Emb. kg/p Dn L1 L2 L H
Code Code palette m3/p.
03NRSPP20 16V6650 20 1 - - - 20 16 84,5 73,5 74
03NRSPP25 16V6651 25 1 - - - 25 17 84,5 77,5 74
03NRSPP32 16V6652 32
DRAWING No:
ITEM:
NRSPP 1 - - -
DESC: RUBINETTO A SFERA IN PPR PER
ESTERNO 32 NI10039 20 108 89 92
SHEET OF REV.
03NRSPP40www.nupigeco.com 16V6653
- info@nupigeco.com
40
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nrspp\NI10039.dwg
1
PPR BALL VALVE FOR EXTERNAL
- - -
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
40 1 1 0
22 108 97,5 105
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
ROBINET À PAPILLON
Matériel: PPR
Normes: DIN 16962
Gamme: ø50 ÷ ø225 mm
L2 L1
H1
H
H2
Dn
L FIG. 223
- 90 80 10 272 110
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
185
1 1 0
178 93 271 8
03NVFK1104 110 1 - - - 110 100 10 272
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
110 211 192 107 299 8
03NVFK1606 160 1 - - - 160 150 10 330 110 268 225 134 359 8
03NVFK2002258 200-225 1 - - - 200-225 200 10 420 122 323 272 161 433 8
L1
L FIG. 224
FIG. 224A
FIG. 224B
Polysystem
ROSACE ET CAPUCHON
Matériel: Plastique chromée
Gamme: ø20 ÷ ø25 mm
FIG. 224C
FIG. 224D
FIG. 224E
H1
H
Dn
D1
L1
L
FIG. 225
L1
L2
FIG. 226
Polysystem
Dn1
D
D1
Dn2
L1 L2
L
FIG. 230
Code
03NBRF20
03NBRF25 Code 25
20 20
25
14
18
53
57
20
20
20
palette
20
73
70 kg/p m3/p.
03NBRF32 32 32 24 67 20 20 70
03NBRF20 16V6732
03NBRF40 40 40
20 30 29 77 20
2.640
20
0,074
70
0,0003 20 20 14 53 20 20 73
03NBRF25 16V6733 25 26 2.288 0,088 0,0003 25 25 18 57 20 20 70
03NBRF32 16V6734 32
ITEM: 20 1.760 0,115
DESC: GIUNTO 0,0004
3 PEZZI BOCCHETTONE32 32 DRAWING No: 24 67 20 20 70
NBRF NI10037
03NBRF40 16V6735 40
UNION THREE PIECE
18
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nbrf\NI10037.dwg
1.584 0,147 0,0005 40 40 SHEET OF
1 1
29
REV.
0
77 20 20 70
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
CH1
Dn
D1
L1
L
FIG. 231
CODE Dn D1 L1 L CH1 CH2
NIRON POLYSYSTEM 03NCSJ2020 20-20 15 14
Q.té8579 30
Poids
46
Volume
Ø
03NCSJ2525
03NCSJ3232
25-20
32-32 Emb. 19
26
16
18 106
38
50
52
kg/p
68 Dn D1 L1 L CH1 CH2
Code Code 03NCSJ4040
03NCSJ5050
40-40
50-50
33
43
22
24
palette
120
130
54
71
80
97
m3/p.
03NCSJ6363 63-63 52 28 153 80 109
1 1
REV.
0
16 85 38 52
03NCSJ3232 16V6734OT 32-32 1 - - - 32-32 26 18 106 50 68
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
CH
D
D1
Dn
F
LF L1
L2
L
FIG. 232
Polysystem
CH2
CH1
Dn
L
FIG. 233A
03NTCMT20 16V6773FM 20 x ½” 1 - - - 20 ½”
DRAWING No:
90 22 29
03NTCMT25 16V6774FM
ITEM:
25 x ¾”
DESC: BOCCHETTONE FILETTATO MASCHIO
1 - NTCMT
-
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntcmt\NI10094.dwg
- 25 ¾”
NI10094
SHEET OF
1 1
REV.
0
98 26 38
03NTCMT32 16V6775FM 32 x 1” 1 - - - 25 1” 107 34 47
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Dn
L FIG. 233B
kg/p
03NTCFT20 20 1/2" 89 24 30
03NTCFT20 16V6773FF 20 x ½” 1 - - - 20 ½” 89 24 30
03NTCFT63 63 2" 146 70 82
03NTCFT25 16V6774FF 25 x ¾”
DRAWING No:
1 - - - 25 ¾” 89 32 38
ITEM: DESC: BOCCHETTONE FILETTATO FEMMINA
NTCFT NI10093
SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntcft\NI10093.dwg 1 1 0
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
CH
D
F
Dn
LF L1
L
FIG. 234
NIRON Poids
Ø Emb. kg/p Dn F LF D L1 L CH
Code
03BF2012 20 x ½” 1 0,160 20 ½” 17 35 23 56 29
03BF2534 25 x ¾” 1 0,240 25 ¾” 18 42 25 60 35
03BF321 32 x 1” 1 0,380 32 1” 21 50 25 69 43
03BF40114 40 x 1 ¼” 1 0,520 40 1 ¼” 21,4 58 26 72 52
03BF50112 50 x 1 ½” 1 0,890 50 1 ½” 19 71 35 88 63
03BF632 63 x 2” 1 1,280 63 2” 23,7 88 38 96 77
03BF75212 75 x 2 ½” 1 1,680 75 2 ½” 30,2 100 40 99 90
03BF903 90 x 3” 1 2,965 90 3” 33,3 120 42 120 109
03BF1104 110 x 4” 1 3,685 110 4” 39,3 142 43 125 129
Polysystem
CH
D
F
Dn
LF L1
L
FIG. 234A
NIRON Poids
Ø Emb. kg/p Dn F LF D L1 L CH
Code
03BM2012 20 x ½” 1 0,140 20 ½” 13,2 35 23 56 29
03BM2534 25 x ¾” 1 0,210 25 ¾” 14,5 42 25 61 35
03BM321 32 x 1” 1 0,340 32 1” 16,8 50 25 72 43
03BM40114 40 x 1 ¼” 1 0,500 40 1 ¼” 19,1 58 26 77 52
03BM50112 50 x 1 ½” 1 0,800 50 1 ½” 19,1 71 35 91 63
03BM632 63 x 2” 1 1,200 63 2” 23,4 88 38 100 77
03BM75212 75 x 2 ½” 1 1,750 75 2 ½” 26,7 100 40 109 90
03BM903 90 x 3” 1 2,815 90 3” 29,8 120 42 128 109
03BM1104 110 x 4” 1 3,940 110 4” 35,8 142 43 135 129
Polysystem
CH
D1
F
H
H1
L1
LF Dn
L2
L
FIG. 235
BOUCHON DE RÉPARATION
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
D1
D2
L1 L2
L
FIG. 236
Polysystem
(A)
COLLET AVEC JOINT TORIQUE OU
PLANE
D2
D
D1
Dn
L1 Matériel: PPR - Nèoprène
Normes: DIN 16962 - UNI EN ISO 15874
L
CODE
03NCOSA32
Dn
32
D1
28
D2 D
40,6 51
L1
18
L
26
(B) Gamme: ø32 ÷ ø630 mm
03NCOSA40
03NCOSA50
03NCOSA63
40
50
63
36
45,5
56,5
49,4 64
61 73,2
76 90,5
20,5
23,5
27,5
30
34
38
Notes: T ype C - Raccord M/M (SDR11) pour soudure
03NCOSA75 75 71 90 104,5 30 42
bout-à-bout ou avec manchon électrique
D2
D
DRAWING No:
ITEM: DESC: COLLARE A SALDARE TIPO A FEMMINA
NCOSA
D1
Dn
SHEET OF REV.
STUB END WITH O-RING SEAL
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncosa\NI10009.dwg 1 3 -1
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L1
L
CODE
03NCOSA90
Dn
90
D1
73,6
D2
107
D
130
L1
37
L
46
(C)
03NCOSA110 110 90 131 150 43 57
03NCOSA125 125 110 146 162 47,5 62,5
DRAWING No:
ITEM: DESC: COLLARE A SALDARE TIPO B FEMMINA
NCOSA NI10009
Dn
D3
SHEET OF REV.
STUB END WITH FLAT SEAL
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncosa\NI10009.dwg 2 3 -1
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
S
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L2 L1
L
CODE Dn S D D3 L1 L2 L
FIG. 237
03NCOSA160 160 14,6 212 175 105 25 180
03NCOSA200 200 18,2 268 232 125 32 200
03NCOSA250 250 22,7 320 285 132 35 207
03NCOSA315 315 28,6 370 335 152 35 228
03NCOSA355 355 32,2 430 373 166 40 246
03NCOSA400 400 36,3 482 427 182 46 274
03NCOSA450 NIRON 450 40,9 585 POLYSYSTEM 514 200 60 320 Q.té Poids Volume
03NCOSA500 500 45,4 585 530 390
Type 60 532
Ø Emb. kg/p Dn S D D1 D2 D3 L1 L2 L
03NCOSA560
03NCOSA630 Code 560
630
50,8
57,2
685
685 Code 615
642
450
270
80
64
560
370 palette m3/p.
03NCOSA32 ITEM: 16V7150
NCOSA
A 32
DESC: COLLARI A SALDARE TIPO C MASCHIO
SDR11
100 9.600 0,022 0,0001
DRAWING No:
NI10009
32 - 51 28 40,6 - 18 - 26
03NCOSA40 16V7151 40
SHEET OF REV.
03NCOSA50 16V7152 A
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
50 36 3.168 0,056 0,0002 50 - 73,2 45,5 61 - 23,5 - 34
03NCOSA63 16V7153 A 63 20 1.760 0,088 0,0004 63 - 90,5 56,5 76 - 27,5 - 38
03NCOSA75 - A 75 12 1.056 0,129 0,0007 75 - 104,5 71 90 - 30 - 42
03NCOSA90 - B 90 8 704 0,250 0,0010 90 - 138 84 107 - 37 - 46
03NCOSA110 - B 110 10 480 0,375 0,0017 110 - 150 90 131 - 43 - 57
03NCOSA125 - B 125 8 384 0,475 0,0021 125 - 162 110 146 - 47,5 - 62,5
03NCOSA160 - C 160 24 96 1,758 0,0090 160 14,6 212 - - 175 105 25 180
03NCOSA200 - C 200 12 48 3,217 0,0180 200 18,2 268 - - 232 125 32 200
03NCOSA250 - C 250 18 36 4,416 0,0282 250 22,7 320 - - 285 132 35 207
03NCOSA315 - C 315 1 - - - 315 28,6 370 - - 335 152 35 228
03NCOSA355 - C 355 1 - - - 355 32,2 430 - - 373 166 40 246
03NCOSA400 - C 400 1 - - - 400 36,3 482 - - 427 182 46 274
03NCOSA450 - C 450 1 - - - 450 40,9 585 - - 514 200 60 320
03NCOSA500 - C 500 1 - - - 500 45,4 585 - - 530 390 60 532
03NCOSA560 - C 560 1 - - - 560 50,8 685 - - 615 450 80 560
03NCOSA630 - C 630 1 - - - 630 57,2 685 - - 642 270 64 370
Polysystem
COLLET - SDR 17
Matériel: PPR - Néoprène
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø160 ÷ ø400 mm
Notes: Raccord M/M (SDR11) pour soudure bout-à-bout ou avec
manchon électrique
Dn
D3
D
S
L2 L1
L
FIG. 237A
CODE Dn S D D3 L1 L2 L
03NCDOSA160 160 9,5 212 175 105 18 180
NIRON
03NCDOSA200 200 11,9 268 232 Q.té
120 24 Poids
200 Volume
Ø
14,8 320 Emb.285 kg/p Dn S D D3 L1 L2 L
Code
03NCDOSA250
03NCDOSA315
250
315 18,8 370 335
palette
142
152
25
25
207
217
m3/p.
03NCDOSA160
03NCDOSA355
03NCDOSA400
355
400
21,1
160
23,7
430 1 373
482 427
1761
182
30
33
246
-
260
- 160 9,5 212 175 105 18 180
03NCDOSA200 200 1 1 - - 200 11,9 268 232 120 24 200
03NCDOSA250 250 1 1 - - 250 14,8 320 285
DRAWING No:
142 25 207
ITEM: DESC: STUB END
03NCDOSA315 315 1
NCDOSA 1 SDR17 - - 315 18,8 370 335
NI10100
SHEET OF REV.
152 25 217
03NCDOSA355 355 1 C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncdosa -
SDR17\NI10100.dwg 1 - - 355 21,1 430 1 373
1 0 176 30 246
03NCDOSA400 400
www.nupigeco.com - info@nupigeco.com
1 1 - - 400 23,7 482 427 182 33 260
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
(A) S
D3
r
Matériel: Aluminium
D2
D1
D
Normes: EN 1092
Gamme: ø32 ÷ ø400 mm
Articolo TYPE PN Dn (PP) Dn D S r D1 D2 D3 holes screws
00FLAALPV032 A 10 32 25 115 12 2 42 85 14 4 M12
00FLAALPV040
00FLAALPV050
A
A
10
10
40
50
32 140 16
40 150 16
2
2
51 100 18 4
63 110 18 4
M16
M16
(B) S Ce nouveau design permet une réduction considérable du poids et la forme particulière des brides permette qu’elles
puissent agir en tant que“rondelles concaves élastiques”(cuvettes de ressort) qui stockent la précontrainte nécessaire pour
équilibrer toute déformation du matériau thermoplastique. Nous signalons également la facilité d’installation en raison de
la légèreté des brides et l’élimination de la procédure de resserrage des écrous et boulons nécessaire après l’installation.
D3
Articolo TYPE PN Dn (PP) Dn D S r D1 D2 D3 holes screws r
00FLAALPV063 B 10 63 50 165 20 4 78 125 18 4 M16
00FLAALPV075 B 10 75 65 185 20 4 92 145 18 4 M16
D2
D1
DRAWING No:
10 ITEM: 80 200 22 4DESC: 109 FLANGIA 160 18 IN8ALLUMINIO
D
(C) S
D3
r
DRAWING No:
ITEM: DESC: FLANGIA IN ALLUMINIO
NI10185
FLAALPV - FLAAL ALLUMINIUM FLANGE FOR STUB END SHEET OF REV.
D2
D1
D
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Flaalpv - Flaal\NI10185.dwg 2 3 -1
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
3
REV.
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
est l’élimination de la procédure de resserrage des écrous et boulons nécessaires après l’installation. La forme particulière
PN Dn (PP) Dn D S r D1 D2 D3 holes screws
des brides permette qu’elles puissent agir en tant que “rondelles concaves élastiques” (cuvettes de ressort) qui stockent
D2
D1
D
10 32 25 122 17 3 42 85 14 4 M12
10 40 32 142 17 3 51 100 18 4 M16 la précontrainte nécessaire pour équilibrer toute déformation du matériau thermoplastique.
10 50 40 156 19 3 62 110 18 4 M16
10 63 50 171 20 3 78 125 18 4 M16
10 75 65 191 21 3 92 145 18 4 M16
10 90 80 206 21 3 108 160 18 8 M16
10 110 100 226 22 3 128 180 18 8 M16
10 125 100 226 23 3 135 180 18 8 M16
FIG. 237C
10 160 150 296 28 3 178 240 22 8 M20
10 200 200 350 23 3 250 295 22 8 M20
10 250 250 412 36 4 288 350 22 12 M20
10 315 300 462 42 4 338 400 22 12 M20
10 355 350 525 52 6 376 460 22 16 M20
10 400
NIRON/ POLYSYSTEM
400 586 56 6 430 515 26 16 M24
Poids N°
Ø Emb. kg/p PN DN (PP) Dn D S r D1 D2 D3 Vis
Code Trous
00FLAACPP032 32 1 0,500 10 32 25 122 17 3 42 85 14 4 M12
00FLAACPP040
ITEM:
FLAACPP
40
DESC: FLANGIA 1
IN 0,550
ACCIAIO
POLIPROPILENE
10
RICOPERTA IN 40 32
DRAWING No:
NI10197
142 17 3 51 100 18 4 M16
00FLAACPP050 50FLANGE 1 0,750 10 50 1400 156 19 3 62 110 18 4 M16
SHEET OF REV.
POLYPROPYLENE COATED CAST IRON
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Flaacpp\NI10197.dwg 1
in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
D3
r mêmes performances.
Les caracteristiques principales sont la facilité de montage grâce à la légèreté des brides, l’excellente résistance à la corrosion
est l’élimination de la procédure de resserrage des écrous et boulons nécessaires après l’installation. La forme particulière
D2
D1
D
des brides permette qu’elles puissent agir en tant que “rondelles concaves élastiques” (cuvettes de ressort) qui stockent
la précontrainte nécessaire pour équilibrer toute déformation du matériau thermoplastique.
FIG. 237D
Polysystem
MANCHON ELECTROSOUDABLE
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø20 ÷ ø315 mm
H
D
Dn
L1
FIG. 240
Polysystem
(A) L2
COUDE ELECTROSOUDABLE 90°
TYPE A
L1 L
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
Dn
H
Gamme: ø20 ÷ ø160 mm
Notes: T ype A et C monofilaire
Type B bifilaire
TYPE BTYPE A TYPE C
CODE Dn L1 L2 (B)
L H L2 L2
03NGE20 (A) 20 34 50,5 52 95,5 L1 L L
03NGE25 (A) 25 37 54 57 102
L1
Dn
Dn
DRAWING No:
ITEM: DESC: GOMITO 90° ELETTROSALDABILE
NGE NI10002
H
ELECTRIC 90° ELBOW SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nge\NI10002.dwg 1 2 -1
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
TYPE B TYPE C
L2 (C) TYPE C
CODE Dn L1 L2 L H
03NGE32 (C) L2 32 34 57,5 64 80
L1 L 03NGE40 (B)
L1 40 41 65 L 73 91,5
03NGE50 (B) 50 48 77 84 109,5 TYPE B
03NGE63 (B) 63 53 88 100 126
03NGE75 (C) 75 58 97 110 142
03NGE90 (B) 90 78 119 133 176
03NGE110 (B) 110 83 144 164 214
Dn
Dn
DRAWING No:
ITEM: DESC: GOMITO 90° ELETTROSALDABILE
NGE ELECTRIC 90° ELBOW
NI10002
SHEET OF REV.
FIG. 241
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nge\NI10002.dwg 2 2 -1
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
TYPE C
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
CODE Dn L1 L2 L H
03NGE32 (C) 32 34 57,5 64 80
03NGE40 (B) 40 41 65 73 91,5
03NGE50 (B) 50 NIRON 48 77 POLYSYSTEM 84 109,5 TYPE B
Q.té Poids Volume
03NGE63 (B) 63 53 88 100 126 Type Ø Emb. kg/p Dn L1 L2 L H
03NGE75 (C)
03NGE90 (B)
75
90 Code 58
78
97
119 Code 110
133
142
176 palette m3/p.
03NGE110 (B) 110 83 144 164 214
03NGE160 (C)
03NGE20 160 90
-173 A 20
208,5
30 269 1.440 - - 20 34 50,5 52 95,5
03NGE25ITEM: - DESC: GOMITO 25
A90° ELETTROSALDABILE30 1.440
DRAWING No: - - 25 37 54 57 102
NGE ELECTRIC 90° ELBOW
NI10002
03NGE32 - C
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nge\NI10002.dwg 32 20 960-1
SHEET OF
2 2
REV.
- - 32 34 57,5 64 80
03NGE40 16V7604 40
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
B 20
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice 960 0,175 0,0008 40 41 65 73 91,5
03NGE50 16V7605 B 50 25 675 0,246 0,0014 50 48 77 84 109,5
03NGE63 16V7606 B 63 15 405 0,420 0,0024 63 53 88 100 126
03NGE75 - C 75 12 324 0,420 0,0030 75 58 97 110 142
03NGE90 - B 90 14 168 1,000 0,0057 90 78 119 133 176
03NGE110 - B 110 10 120 1,395 0,0080 110 83 144 164 214
03NGE160 - C 160 12 48 - - 160 90 173 208,5 269
Polysystem
L2
L2
L1
L1
n
Dn
D
Matériel: PPR
Normes: DIN 16962 - UNI EN ISO 15874
H
Gamme: ø32 ÷ ø160 mm
Notes: T ype A bifilaire
Type B monofilaire
TYPE B
L (B) L
L2
L2
CODE Dn L1 L2 L H
L1
03NCE32
n (B) 32 36 46 64 94
D
03NCE40 (A) 40 42 52 74,5 109
03NCE50 (A) 50 47 63 85 126
03NCE63 (A) 63 54 68 100 146
03NCE75 (A) 75 60 81 112,5 169
H
03NCE90 (A)
H
90 67 97 132 219
03NCE110 (A) 110 81 107 152 249
03NCE160 (B) 160 90 134 208 296
DRAWING No:
ITEM: DESC: CURVA 45° ELETTROSALDABILE
NCE ELECTRIC 45° ELBOW
NI10003
SHEET OF REV.
1 1 -1
FIG. 242
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nce\NI10003.dwg
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
TYPE B
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L1 NIRON
L2 L POLYSYSTEM
H Q.té Poids Volume
36 46 64 94 Type Ø Emb. kg/p Dn L1 L2 L H
42 Code
52 74,5 Code109 palette m3/p.
47 63 85 126
54
60
03NCE32
68
81
100 -
112,5
146
169
32 B 30 1.440 - - 32 36 46 64 94
67
81
03NCE40
97
107
132 16V7614
152
219
249
A 40 20 960 0,146 0,0009 40 42 52 74,5 109
90 03NCE50
134 208 16V7615
296 A 50 16 768 0,231 0,0011 50 47 63 85 126
ITEM:03NCE63 16V7616 A 63
DESC: CURVA 45° ELETTROSALDABILE 20 540 DRAWING No:
0,359 0,0018 63 54 68 100 146
NCE ELECTRIC 45° ELBOW
NI10003
03NCE75
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nce\NI10003.dwg
- A 75 14 378
1 1
SHEET OF REV.
-1
0,443 0,0026 75 60 81 112,5 169
o.com
03NCE90 - A 90
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
15 180 0,900 0,0080 90 67 97 132 219
yway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Polysystem
(A)
TYPE A
L2
TÉ ELECTROSOUDABLE
TYPE B
L2
L1 L
L1 L
Matériel: PPR
Dn
Normes: DIN 16962 - UNI EN ISO 15874
Gamme: ø20 ÷ ø110mm
H
Dn
Notes: T ype A et B bifilaire
Type C monofilaire avec terminaison à
ergot
A TYPE B
(B) L2 TYPE B
2
L1 L TYPE A
L
CODE Dn S L1 L2 L3 L H
03NTE40 (A) 40 - 44 70 - 75 99
03NTE50 (B) 50 - 48 77 - 86 140
H
H
03NTE63 (A) - -
Dn
63 54 90 103 135
03NTE90 (A) 90 - 68 120 - 134 182
03NTE110 (A) 110 - 83 144 - 154 214
DRAWING No:
ITEM: DESC: TEE ELETTROSALDABILE
TYPE C NTE ELECTROFUSION TEE
NI10004
SHEET OF REV.
(C) TYPE B
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nte\NI10004.dwg 1 2 -1
www.nupigeco.com L2
- info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
TYPE A
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L1 L
Dn S L1 L2 L3 L H
40 - 44 70 - 75 99
50 - 48 77 - 86 140
Dn
63 - 54 90 - 103 135
90 - 68 120 - 134 182
H
DRAWING No:
ITEM: DESC: TEE ELETTROSALDABILE
NTE ELECTROFUSION TEE
NI10004
S SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nte\NI10004.dwg 1 2 -1
- info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
not be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
TYPE C
FIG. 243
DE Dn S NIRON
L1 L2POLYSYSTEM
L3 L H Q.té Poids Volume
0 (C) 20 3 37 45 46 52 Type 83 Ø Emb. kg/p Dn L1 L2 L3 L H
5 (C) 25 3Code 37 50 Code 46 57 87 palette m3/p.
2 (C) 32 3 37 55 47 64 96
5 (C) 75 03NTE20
6,8 58 -
98 72 112 C 178 20 40 1.920 - - 20 37 70 46 52 83
03NTE25
ITEM:
- C
DESC: TEE ELETTROSALDABILE
25 30 1.440 - -
DRAWING No: 25 37 77 46 57 87
03NTE32 NTE
- CELECTROFUSION 32 25TEE 1.200 - NI10004
-
SHEET OF REV.
32 37 90 47 64 96
03NTE40 16V7624All dimensions haveAto be considered40
2 2 -1
12 576 0,180 0,0015 40 44 70 - 75 99
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nte\NI10004.dwg
03NTE50 16V7625 B 50 15
cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice 405 0,356 0,0024 50 48 77 - 86 140
03NTE63 16V7626 A 63 10 270 0,605 0,0036 63 54 90 - 103 135
03NTE75 - C 75 6 162 1,083 0,0060 75 58 98 72 112 178
03NTE90 - A 90 10 120 1,350 0,0080 90 68 120 - 134 182
03NTE110 - A 110 7 84 1,828 0,0114 110 83 144 - 144 214
Polysystem
MANCHON
Matériel: PPR
Normes: UNI EN ISO 15874
Gamme: ø20 ÷ ø110 mm
Notes: De ø20 à ø63 classe 2-6 bar
De ø75 à ø110 classe 1-6 bar
H
Dn
L1
L
FIG.311
CODE Dn L1 L H
03NKMAN20 20 52,5 119 45
03NKMAN25 25 54,5 118,5 53 Q.té Volume
Code
03NKMAN32 32 Ø 62,5 Emb.
138 64,5 Poids Dn L1 L H
03NKMAN40 40 80 167,5 palette
83,5 kg/p m3/p.
03NKMAN50 50 90 184 96
03NKMAN20
03NKMAN63
03NKMAN75
63
75 20121
110 224,5
1
246
113
132 - - - 20 52,5 119 45
03NKMAN25
03NKMAN90
03NKMAN110
90
110 25175,5
144 298
1
364
150,5
177 - - - 25 54,5 118,5 53
03NKMAN32 32 1 - - - 32
DRAWING No:
62,5 138 64,5
ITEM: DESC: MANICOTTO - COMPRESSIONE
03NKMAN40 40 NKMAN 1 -
COUPLER -
- COMPRESSION -FITTINGS 40 NI1018180
SHEET OF REV.
167,5 83,5
03NKMAN50
www.nupigeco.com - info@nupigeco.com
50 1
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nkman -
COMPRESSIONE\NI10181.dwg
- - -
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
50 1 1 -1
90 184 96
03NKMAN63 63 1 -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice - - 63 110 224,5 113
03NKMAN75 75 1 - - - 75 121 246 132
03NKMAN90 90 1 - - - 90 144 298 150,5
03NKMAN110 110 1 - - - 110 175,5 364 177
RÉDUCTION
Matériel: PPR
Normes: UNI EN ISO 15874
Gamme: ø25-20 ÷ ø110-90 mm
Notes: D e ø20 à ø63 classe 2-6 bar
De ø75 à ø110 classe 1-6 bar
Dn2
Dn1
H
L1 L2
CODE Dn1 Dn2 L1 L2 L H L
03NKR2520 25 20 54,5 52,5 111 53
03NKR3220 32 20 62,5 52,5 128,5 64,5
03NKR3225 32 25 62,5 54,5
54,5
129 64,5
83,5
FIG.312
03NKR4025 40 25 80 145
03NKR4032 40 32 80 62,5 145 83,5
03NKR5032 50 32 90 62,5 163 96
03NKR5040 50 40 90 80 160 96
Code 03NKR6340
03NKR6332 Ø63 32 Emb.
110 62,5Q.té187 Poids
113 Volume
Dn1 Dn2 L1 L2 L H
63 40 110 palette
80 204 kg/p
113 m3/p.
03NKR6350 63 50 110 90 228 113
03NKR2520
03NKR7550
03NKR7563 25-20
75
75
50
63
121
1121 90
110 -
228,5
233
132
-
132 - 25 20 54,5 52,5 111 53
03NKR3220
03NKR9063
03NKR9075 32-20
90
90
63
75
144
1144 110 254,5
-
121 290,5
152
-
152 - 32 20 62,5 52,5 128,5 64,5
03NKR3225
03NKR11090
32-25 110 90 175,5
1 144 330,5
- 181
- - 32 25 62,5 54,5 129 64,5
DRAWING No:
ITEM: DESC: RIDUZIONE - COMPRESSIONE
03NKR4025 40-25 1 NKR - - REDUCER-- COMPRESSION
40 FITTINGS
25 80NI10182 54,5
SHEET OF REV.
145 83,5
03NKR4032 40-32 1 -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nkr -
COMPRESSIONE\NI10182.dwg - - 40 32 80 1 1 -1
62,5 145 83,5
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NKR5032 50-32 1 - -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice - 50 32 90 62,5 163 96
03NKR5040 50-40 1 - - - 50 40 90 80 160 96
03NKR6332 63-32 1 - - - 63 32 110 62,5 187 113
03NKR6340 63-40 1 - - - 63 40 110 80 204 113
03NKR6350 63-50 1 - - - 63 50 110 90 228 113
03NKR7550 75-50 1 - - - 75 50 121 90 228,5 132
03NKR7563 75-63 1 - - - 75 63 121 110 233 132
03NKR9063 90-63 1 - - - 90 63 144 110 254,5 152
03NKR9075 90-75 1 - - - 90 75 144 121 290,5 152
03NKR11090 110-90 1 - - - 110 90 175,5 144 330,5 181
COUDE 90°
Matériel: PPR
Normes: UNI EN ISO 15874
Gamme: ø20 ÷ ø110 mm
Notes: De ø20 à ø63 classe 2-6 bar
De ø75 à ø110 classe 1-6 bar
Dn
H
H1
L1
L
CODE Dn L1 L H1 H
FIG.313
03NKG20 20 52,5 93,5 69 93,5
03NKG25 25 54,5 100 73 100
1
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nkg -
COMPRESSIONE\NI10180.dwg
- - - 40 80 1 1 -1 152 109 152
03NKG50 50
www.nupigeco.com - info@nupigeco.com
1 - - - 50 90 168 122 168
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
TÉ 90
Matériel: PPR
Normes: UNI EN ISO 15874
Gamme: ø20 ÷ ø110 mm
Notes: D e ø20 à ø63 classe 2-6 bar
De ø75 à ø110 classe 1-6 bar
Dn
H
H1
L1
L2
L
CODE Dn L1 L2 L H1 H
FIG.314
03NKT20 20 52,5 68 136 68 91,5
03NKT25 25 54,5 73 146 73 98
03NKT32 32 62,5 87
Q.té
174 87 118
Poids Volume
Code03NKT50
03NKT40
Ø50
40 80
Emb.
108 216 108 152
kg/p Dn L1 L2 L H1 H
03NKT63 63
95
110
122
145
palette
244
290
122
145
175
197
m3/p.
03NKT75 75 121 168 336 168 234
03NKT20 03NKT90 20
90 144 1 207 414- 207 -
281,5 - 20 52,5 68 136 68 91,5
03NKT110 110 175,5 244 488 244 332,5
03NKT25 25 1 - - - 25 54,5 73 146 73 98
DRAWING No:
03NKT32 32 ITEM:
1 NKT - - 90° TEE -- COMPRESSION
32 FITTINGS
DESC: TEE - COMPRESSIONE
62,5 87 NI10183174 87 118
SHEET OF REV.
03NKT40 40 1 -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nkt -
COMPRESSIONE\NI10183.dwg - - 40 80 108 1 1 -1216 108 152
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NKT50 50 1 - - -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
50 95 122 244 122 175
03NKT63 63 1 - - - 63 110 145 290 145 197
03NKT75 75 1 - - - 75 121 168 336 168 234
03NKT90 90 1 - - - 90 144 207 414 207 281,5
03NKT110 110 1 - - - 110 175,5 244 488 244 332,5
MANCHON
Matériel: PVDF - PPR
Normes:UNI EN ISO 15874
Gamme: ø32 ÷ ø110 mm
H
Dn
L1
L
FIG.411
CODE Dn L1 L H
03NKMANPL32 32 62,5 138 64,5
03NKMANPL40 40 80 167,5 Q.té
83,5 Poids Volume
Code
03NKMANPL50 50 Ø 90 Emb.
184 96
kg/p Dn L1 L H
03NKMANPL63 63 110 224,5 palette
113 m3/p.
03NKMANPL90 90 144 298 150,5
03NKMANPL32 •
03NKMANPL110 110 32 175,5 1
364 177 - - - 32 62,5 138 64,5
03NKMANPL40 • 40 1 - - - 40 80 167,5 83,5
03NKMANPL50 • 50 1 - - - 50
DRAWING No:
90 184 96
ITEM: DESC: MANICOTTO - COMPRESSIONE
03NKMANPL63 • 63NKMANPL
1 -
COUPLER -
- COMPRESSION-FITTINGS 63 110
NI10086
SHEET OF REV.
224,5 113
03NKMANPL90 •
www.nupigeco.com - info@nupigeco.com
90 1
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nkmanpl -
PLATINUM\NI10086.dwg
- - -
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
90 1 1
144
-1
298 150,5
03NKMANPL110 • 110 1 -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice - - 110 175,5 364 177
RÉDUCTION
Matériel: PVDF - PPR
Normes:UNI EN ISO 15874
Gamme: ø40-32 ÷ ø110-90 mm
Dn2
Dn1
H
L1 L2
L
03NKRPL6350 • 63-50 1 - - -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
63 50 110 90 228 113
03NKRPL9063 • 90-63 1 - - - 90 63 144 110 254,5 152
03NKRPL11090 • 110-90 1 - - - 110 90 175,5 144 330,5 181
COUDE 90°
Matériel: PVDF - PPR
Normes:UNI EN ISO 15874
Gamme: ø32 ÷ ø110 mm
Dn
H
H1
L1
L
CODE Dn L1 L H1 H
FIG. 413
03NKGPL32 32 62,5 120 86 120
03NKGPL40 40 80 152 109 152
03NKGPL50 50 90 168 122 168
03NKGPL63 63 110 201 147 Q.té 201 Poids Volume
Code
03NKGPL90 90 Ø
144 282Emb. 207 282 kg/p Dn L1 L H1 H
03NKGPL10 110 175,5 331,5 243palette331,5 m3/p.
03NKGPL32 • 32 1 - - - 32 62,5 120 86 120
03NKGPL40 • 40
ITEM: 1 - GOMITO- A 90° - COMPRESSIONE
DESC: - 40 80DRAWING No: 152 109 152
NKGPL NI10085
03NKGPL50 • 50 1 C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nkgpl -
- 90° ELBOW - COMPRESSION FITTINGS
- - 50 90 1 SHEET OF
1
REV.
-1
168 122 168
03NKGPL63 • 63
PLATINUM\NI10085.dwg
www.nupigeco.com - info@nupigeco.com 1 - - - 63
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned 110 201 147 201
03NKGPL90 • 90
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
TÉ 90°
Matériel: PVDF - PPR
Normes:UNI EN ISO 15874
Gamme: ø32 ÷ ø110 mm
Dn
H
H1
L1
L2
L
CODE
03NKTPL32
Dn
32
L1
62,5
L2
87
L
174
H1
87
H
118
FIG.414
03NKTPL40 40 80 108 216 108 152
03NKTPL50 50 95 122 244 122 175
Q.té Volume
207Poids
03NKTPL63 63 110 145 290 145 197
Code03NKTPL90 Ø 90 144Emb. 207 414 281,5
kg/p Dn L1 L2 L H1 H
03NKTPL110 110 175,5 244 palette
488 244 332,5 m3/p.
03NKTPL32 • 32 1 - - - 32 62,5 87 174 87 118
03NKTPL40 • 40 1
ITEM: - -
DESC: TEE - COMPRESSIONE
- 40 80 108 DRAWING No:216 108 152
NKTPL- NI10088
03NKTPL50 • 50 1
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Nktpl -
- 90° TEE -- COMPRESSION
50 FITTINGS
95 122 SHEET OF
1 1
244
REV.
-1
122 175
03NKTPL63 • 63 1 - - - 63 110 145 290 145 197
PLATINUM\NI10088.dwg
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
FIG. 511
FIG. 511A
Dn1
FIG.511B
CODE Dn1 Dn2 L1 L
03NCWBCL3211 32 90 220 500
03NCWBCL4011 40 110 220 500
03NCWBCL5011 50 Q.té 110 220
Poids 500 Volume
Code Ø
03NCWBCL6311 Emb. 63 125 220
kg/p
500 Dn1 Dn2 L1 L
03NCWBCL9011 90 palette 160 220 500 m3/p.
03NCWBCL11011 110 200 220 500
03NCWBFG3274 32 1 - - - 32 90 220 500
03NCWBFG4074 40 1 ITEM: -
NCWBCL_11
- -
DESC: SDR11 40 110 220
DRAWING No:
NI10108 500
03NCWBFG5074 50
SHEET OF REV.
1 - -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ncwb -
PREISOLATO\NI10108.dwg
- 50 110 220
1 1 0 500
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NCWBFG6374 63 1 - - -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice 63 125 220 500
03NCWBFG9074 90 1 - - - 90 160 220 500
03NCWBFG11074 110 1 - - - 110 200 220 500
L
03NGCL4011 40 110 22
03NGCL5011 50 110 22
03NGCL6311 63 125 22
03NGCL7511 75 140 22
03NGCL9011 90 160 22
03NGCL11011 110 200 22
03NGCL12511 125 225 22
L1
03NGCL4011 40
PREISOLATO\NI10081.dwg
www.nupigeco.com - info@nupigeco.com 1 - - - 40
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise me 110 220 1.000
03NGCL5011 50 1 - - - 50 110 220 1.000
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
FIG.512A
03NGFG3274 32 1 -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ngfg -
PREISOLATO\NI10082.dwg - - 32 90 1 1 0
220 1.000
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NGFG4074 40 1 - -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice - 40 110 220 1.000
03NGFG5074 50 1 - - - 50 110 220 1.000
03NGFG6374 63 1 - - - 63 125 220 1.000
03NGFG7574 75 1 - - - 75 140 220 1.000
03NGFG9074 90 1 - - - 90 160 220 1.000
03NGFG11074 110 1 - - - 110 200 220 1.000
03NGFG12574 125 1 - - - 125 225 220 1.000
03NGFG16074 160 1 - - - 160 250 220 1.000
03NGFG20074 200 1 - - - 200 315 220 1.000
03NGFG25074 250 1 - - - 250 400 220 1.000
L
03NGWBCL3211 32 90
03NGWBCL4011 40 110
03NGWBCL5011 50 110
03NGWBCL6311 63 125
03NGWBCL9011 90 160
03NGWBCL11011 110 200
L1
Dn1
Dn2
FIG. 512B
03NGWBFG5074 50 1 - -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
- 50 110 220 1.000
03NGWBFG6374 63 1 - - - 63 125 220 1.000
03NGWBFG9074 90 1 - - - 90 160 220 1.000
03NGWBFG11074 110 1 - - - 110 200 220 1.000
L
L1
FIG. 513
TUBO NIRON CLIMA11 PPR BLU CON FIBRA DI VETRO + POLIURETANO + HDPE ESTERNO
03NGCLS6311
www.nupigeco.com - 63
info@nupigeco.com 1 - - - 63
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned 125 220 500
03NGCLS7511 75 1 - - - 75 140 220 500
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L
L1
CODE Dn1 Dn2 L1 L
03NGFGS3274 32 90 220 500
03NGFGS4074 40 110 220 500 Dn1
03NGFGS5074 50 110 220 500
Dn2
03NGFGS6374 63 125 220 500
03NGFGS7574 75 140 220 500
NIRON FG BLUE PPR FIBER GLASS PIPE + PUR + HDPE COVER FIG. 513A
TUBO NIRON FG PPR BLU CON FIBRA DI VETRO + POLIURETANO + HDPE ESTERNO
1 1
REV.
500
PREISOLATO\NI10084.dwg
03NGFG6374
www.nupigeco.com 63
- info@nupigeco.com 1 -All dimensions have to be
- considered in millimeters
- with 5% tolerance63 125
if not otherwise mentioned 220 500
03NGFG7574 75 1 - -
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
- 75 140 220 500
Dn1
Dn2
FIG. 513B
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L
L2
L1
Dn2
Dn1
03NTCL5011 50 1 - -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntcl -
PREISOLATO\NI10110.dwg - 50 110 220 500 1 1 01.000
www.nupigeco.com - info@nupigeco.com
03NTCL6311 63
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
1 - - - 63
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
125 220 500 1.000
03NTCL9011 90 1 - - - 90 160 220 500 1.000
03NTCL11011 110 1 - - - 110 200 220 500 1.000
03NTCL12511 125 1 - - - 125 225 220 500 1.000
03NTCL16011 160 1 - - - 160 250 220 500 1.000
03NTCL20011 200 1 - - - 200 315 220 750 1.500
03NTCL25011 250 1 - - - 250 400 220 750 1.500
03NTCL31511 315 1 - - - 315 450 220 750 1.500
L
L2
L1
Dn2
Dn1
1 1 0
03NTFG5074 50
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntfg -
www.nupigeco.com - info@nupigeco.com
1 -
PREISOLATO\NI10109.dwg
- - 50 110 220
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
500 1.000
03NTFG6374 63 1 - - - 63
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice 125 220 500 1.000
03NTFG7574 75 1 - - - 75 140 220 500 1.000
03NTFG9074 90 1 - - - 90 160 220 500 1.000
03NTFG11074 110 1 - - - 110 200 220 500 1.000
03NTFG12574 125 1 - - - 125 225 220 500 1.000
03NTFG16074 160 1 - - - 160 250 220 500 1.000
03NTFG20074 200 1 - - - 200 315 220 750 1.500
03NTFG25074 250 1 - - - 250 400 220 750 1.500
1 1 0
03NTWBFG5074 www.nupigeco.com
50 - info@nupigeco.com
1 - - - 50 110 220 500 1.000
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntwbcl -
PREISOLATO\NI10111.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NTWBFG6374 63 1 - - - 63
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice 125 220 500 1.000
03NTWBFG9074 90 1 - - - 90 160 220 500 1.000
03NTWBFG11074 110 1 - - - 110 200 220 500 1.000
Type de tuyau: TUYAU NIRON CLIMA 11 BLEU EN PPR AVEC FIBRE DE VERRE
Structure du tuyau: Tuyau multicouche
Matériel: PPR - Fibre de verre
Caractéristiques du tuyau: SDR 11 - S 5
Couleur: Bleu avec bandes bleues foncées
Normes: E N 8075 - EN 253 - UNI EN ISO 15874 - DIN 8077 - DIN 8078
CSA B 137.11 - ASTM F 2389 - ISO 4065
L
L2
L1
Dn2
Dn1
L4
CODE Dn1 Dn2 Dn3 Dn4 L1 L2 L
03NTRCL4032 40 110 32 90 220 500 22
03NTRCL5032 50 110 32 90 220 500 22
03NTRCL5040 50 110 40 110 220 500 22
L3
63/32/63
www.nupigeco.com - info@nupigeco.com
1
PREISOLATO\NI10116.dwg
- - - 63 125 32 90 220 500
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
220 500 1.000
03NTRCL634011 63/40/63 1 - - - 63 125
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice 40 110 220 500 220 500 1.000
03NTRCL635011 63/50/63 1 - - - 63 125 50 110 220 500 220 500 1.000
03NTRCL753211 75/32/75 1 - - - 75 140 32 90 220 500 220 500 1.000
03NTRCL754011 75/40/75 1 - - - 75 140 40 110 220 500 220 500 1.000
03NTRCL755011 75/50/75 1 - - - 75 140 50 110 220 500 220 500 1.000
03NTRCL756311 75/63/75 1 - - - 75 140 63 125 220 500 220 500 1.000
03NTRCL905011 90/50/90 1 - - - 90 160 50 110 220 500 220 500 1.000
03NTRCL906311 90/63/90 1 - - - 90 160 63 125 220 500 220 500 1.000
03NTRCL907511 90/75/90 1 - - - 90 160 75 140 220 500 220 500 1.000
03NTRCL1106311 110/63/110 1 - - - 110 200 63 125 220 500 220 500 1.000
03NTRCL1107511 110/75/110 1 - - - 110 200 75 140 220 500 220 500 1.000
03NTRCL1109011 110/90/110 1 - - - 110 200 90 160 220 500 220 500 1.000
...
244 PPR Piping System
TÉ RÉDUITE PRÉ-ISOLÉE 90°
Structure du raccord: PPR - Fibre de verre - PUR - Couverture en PEHD
Normes: UNI EN ISO 15874 - EN 253 - EN 488 - EN 489 - DIN 8075
Gamme: De ø40/32 à ø315/160 mm
Type de tuyau: TUYAU NIRON CLIMA 11 BLEU EN PPR AVEC FIBRE DE VERRE
Structure du tuyau: Tuyau multicouche
Matériel: PPR - Fibre de verre
Caractéristiques du tuyau: SDR 11 - S 5
Couleur: Bleu avec bandes bleues foncées
Normes: E N 8075 - EN 253 - UNI EN ISO 15874 - DIN 8077 - DIN 8078
CSA B 137.11 - ASTM F 2389 - ISO 4065
L
L2
L1
Dn2
Dn1
L4
CODE Dn1 Dn2 Dn3 Dn4 L1 L2 L
03NTRCL4032 40 110 32 90 220 500 22
03NTRCL5032 50 110 32 90 220 500 22
03NTRCL5040 50 110 40 110 220 500 22
L3
L4
CODE Dn1 Dn2 Dn3 Dn4
03NTRFG4032 40 110 32 90
03NTRFG5032 50 110 32 90
03NTRFG5040 50 110 40 110
L3
03NTRFG6332 63 125 32 90
03NTRFG6340 63 125 40 110
03NTRFG6350 63 125 50 110
03NTRFG7532 75 140 32 90 Dn3
03NTRFG7540 75 140 40 110 Dn4
03NTRFG7550
03NTRFG7563
75
75
140 50 110 220 50
140 63 125 220 50
FIG. 515A
03NTRFG9050 90 160 50 110 220 50
03NTRFG9063 90 160 63 125 220 50
Q.té 220Poids Volume 000
Code03NTRFG9075 Ø 90 Emb.75 140
160 50
125 220 kg/p
200 63 palette
Dn1 Dn2 Dn3 Dn4 L1 L2 L3 L4 L
03NTRFG11063 110 m3/p.
500 220 500 1000
03NTRFG11075 110 200 75 140 220 500 220 500 1000
03NTRFG403274 40/32/40
03NTRFG11090 110 200 1 90 160
- 220 500- 220 -500 1000
40 110 32 90 220 500 220 500 1.000
03NTRFG503274 50/32/50 1ITEM: - - - 50
DESC: 110 32 90 220 500 220 500
DRAWING No: 1.000
NI10115
03NTRFG504074 50/40/50 1 - NTRFG
- - 50 110 40 110 220 500 220 500
SHEET OF REV. 1.000
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntrfg - 1 2 0
03NTRFG633274
www.nupigeco.com63/32/63
- info@nupigeco.com 1 - - - 63 125 32 90 220 500 220 500 1.000
PREISOLATO\NI10115.dwg
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
L4
CODE Dn1 Dn2 Dn3 Dn4
03NTRFG4032 40 110 32 90
03NTRFG5032 50 110 32 90
03NTRFG5040 50 110 40 110
L3
03NTRFG6332 63 125 32 90
03NTRFG6340 63 125 40 110
03NTRFG6350 63 125 50 110
03NTRFG7532 75 140 32 90 Dn3
03NTRFG7540 75 140 40 110 Dn4
03NTRFG7550
03NTRFG7563
75 140 50 110 220 50
75 140 63 125 220 50 FIG. 515A
03NTRFG9050 90 160 50 110 220 50
03NTRFG9063 90 160 63 125 220 50
03NTRFG9075 90 160 75 Q.té Poids50 Volume Dn1
140 220 000
Code Ø 110 Emb.
03NTRFG11063 200 63 125 220kg/p500 220 500 1000 Dn2 Dn3 Dn4 L1 L2 L3 L4 L
palette
03NTRFG11075 110 200 75 140 220 500 m
3
220 /p. 500 1000
03NTRFG11090 110 200 90 160 220 500 220 500 1000
03NTRFG1109074 110/90/110 1 - - - 110 200 90 160 220 500 220 500 1.000
03NTRFG1259074 125/90/125 1
DRAWING No:
-
ITEM: - - 125
DESC: 225 90 160 220 500 220 500
NI10115 1.000
NTRFG
03NTRFG12511074 125/110/125 1 - - - 125 225 110 200 220 500 220 1 500 1.000
SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntrfg - 2 0
PREISOLATO\NI10115.dwg
03NTRFG1609074 160/90/160
www.nupigeco.com 1
- info@nupigeco.com - - -All dimensions
160 250 90 160 220 500
have to be considered in millimeters with 5% tolerance if not otherwise mentioned
220 500 1.000
03NTRFG16011074 160/110/160 1
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L1
Dn2
Dn1
L4
CODE Dn1 Dn2 Dn3 Dn4 L
03NTRWBCL4032 40 110 32 90 22
03NTRWBCL5032 50 110 32 90 22
L3
03NTRWBFG504074 50/40/50 1 - - -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntrwbcl -
PREISOLATO\NI10117.dwg 50 110 40 110 220 500 220 500
1 1 0 1.000
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
03NTRWBFG633274 63/32/63 1 - - - 63 125 32
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
90 220 500 220 500 1.000
03NTRWBFG634074 63/40/63 1 - - - 63 125 40 110 220 500 220 500 1.000
03NTRWBFG635074 63/50/63 1 - - - 63 125 50 110 220 500 220 500 1.000
03NTRWBFG905074 90/50/90 1 - - - 90 160 50 110 220 500 220 500 1.000
03NTRWBFG906374 90/63/90 1 - - - 90 160 63 125 220 500 220 500 1.000
03NTRWBFG1106374 110/63/110 1 - - - 110 200 63 125 220 500 220 500 1.000
03NTRWBFG1109074 110/90/110 1 - - - 110 200 90 160 220 500 220 500 1.000
Type de tuyau: TUYAU NIRON CLIMA 11 BLEU EN PPR AVEC FIBRE DE VERRE
Structure du tuyau: Tuyau multicouche
Matériel: PPR - Fibre de verre
Caractéristiques du tuyau: SDR 11 - S 5
Couleur: Bleu avec bandes bleues foncées
Normes: E N 8075 - EN 253 - UNI EN ISO 15874 - DIN 8077 - DIN 8078
CSA B 137.11 - ASTM F 2389 - ISO 4065
L2
L L1
Dn1
Dn2
H
CODE Dn1 Dn2 L1 L2 L H
03NTSCL3211 32 90 220 750 1000 100
03NTSCL4011 40 110 220 750 1000 120
03NTSCL5011 50 110 220 750 1000 120
03NTSCL6311 63 125 220 750 1000 135
03NTSCL7511 75 140 220 750 1000 150
03NTSCL9011 90 160 220 750 1000 170 FIG. 516
03NTSCL11011 110 200 220 750 1000 210
03NTSCL12511 125 225 220 750 1000 235
03NTSCL16011 160 250 220 750 1000 260
03NTSCL20011Q.té200 Poids
315 Volume
220 1000 1500 325
Code Ø Emb. kg/p Dn1 Dn2 L1 L2 L H
palette
03NTSCL25011 250 400 m3/p. 1000
220 1500 410
03NTSCL31511 315 450 220 1000 1500 480
03NTSCL3211 32 1 -
NIRON CLIMA11 BLUE PPR FIBER GLASS PIPE + PUR + HDPE COVER -
TUBO NIRON CLIMA11 PPR BLU CON FIBRA DI VETRO + POLIURETANO + HDPE ESTERNO
- 32 90 220 750 1.000 100
03NTSCL4011 40 1 - -
ITEM:
- 40 DESC: PREINSULATED
110 220 CROSSOVER
750 90°1.000
TEE
120
DRAWING No:
NI10113
03NTSCL5011 50 1 - - NTSCL_11
- 50 110 90° SORPASSO
TEE 220
SDR11 - S5 - MRS10
750
PREISOLATO1.000 120
SHEET OF REV.
1 1 0
03NTSCL6311
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntscl -
63 1 - - - All 63
dimensions have to 125 220with 5% tolerance
750 if not otherwise1.000 135
PREISOLATO\NI10113.dwg
03NTSCL7511 75 1 - - - 75 140
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
220 750 1.000 150
03NTSCL9011 90 1 - - - 90 160 220 750 1.000 170
03NTSCL11011 110 1 - - - 110 200 220 750 1.000 210
03NTSCL12511 125 1 - - - 125 225 220 750 1.000 235
03NTSCL16011 160 1 - - - 160 250 220 750 1.000 260
03NTSCL20011 200 1 - - - 200 315 220 1.000 1.500 325
03NTSCL25011 250 1 - - - 250 400 220 1.000 1.500 410
03NTSCL31511 315 1 - - - 315 450 220 1.000 1.500 480
L2
L L1
Dn1
Dn2
H
CODE Dn1 Dn2 L1 L2 L H
03NTSFG3274 32 90 220 750 1000 100
03NTSFG4074 40 110 220 750 1000 120
03NTSFG5074 50 110 220 750 1000 120
03NTSFG6374 63 125 220 750 1000 135
03NTSFG7574 75 140 220 750 1000 150
03NTSFG9074 90 160 220 750 1000 170 FIG. 516A
03NTSFG11074 110 200 220 750 1000 210
03NTSFG12574 125 225 220 750 1000 235
03NTSFG16074 160 250 220 750 1000 260
03NTSFG20074Q.té 200 Poids Volume
Code Ø Emb. 315
kg/p
220 1000
Dn1
1500 325
Dn2 L1 L2 L H
palette250
03NTSFG25074 400 m3/p.1000
220 1500 410
NIRON FG BLUE PPR FIBER GLASS PIPE + PUR + HDPE COVER
03NTSFG3274 32 1 -
TUBO NIRON FG PPR BLU CON FIBRA DI VETRO + POLIURETANO + HDPE ESTERNO
- - 32 90 220 750 1.000 100
03NTSFG4074 40 1 - -
ITEM: - 40DESC: PREINSULATED
740 220CROSSOVER
750 90° TEE
1.000 120
DRAWING No:
NI10112
03NTSFG5074 50 1 - - NTSFG_74
- 50 TEE 90° SORPASSO PREISOLATO
740 220
SDR7,4 - S3,2 - MRS10
750 1.000 120
SHEET OF REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntsfg - 1 1 0
03NTSFG6374 63 1 - - - 63 125 220 750 1.000 135
PREISOLATO\NI10112.dwg
www.nupigeco.com - info@nupigeco.com All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
L L1
Dn1
Dn2
H
CODE Dn1 Dn2 L1 L2 L H
03NTSWBCL3211
03NTSWBCL4011
32
40
90
110
220 750
220 750
1000
1000
100
120
FIG. 516B
03NTSWBCL5011 50 110 220 750 1000 120
03NTSWBCL6311 63 125 220 750 1000 135
03NTSWBCL9011 Q.té90 160
Poids Volume
220 750 1000 170
Code Ø Emb.
03NTSWBCL11011 110 200
kg/p
220 3 750 Dn1
1000 210 Dn2 L1 L2 L H
palette m /p.
NIRON OB-CLIMA WHITEBLUE OXIGEN BARRIER AND FIBER GLASS PIPE + PUR + HDPE COVER
03NTSWBFG3274 32 1 -
TUBO NIRON OB-CLIMA NATURALE CON PPR BLUE ESTERNO, BARRIERA OSSIGENO E
FIBRA DI VETRO+ POLIURETANO + HDPE ESTERNO
- - 32 90 220 750 1.000 100
03NTSWBFG4074 40 1 - - - 40 110 220 750 1.000 120
03NTSWBFG5074 50 1 - ITEM:- - 50 PREINSULATED
DESC: 110 220 75090° TEE
CROSSOVER 1.000 120
DRAWING No:
NI10114
NTSWBCL_11 TEE 90° SORPASSO PREISOLATO
03NTSWBFG6374 63 1 - - -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntswbcl -
63 SDR11 125- S5 - MRS10
220 750 1.000 135 0
SHEET OF
1 1
REV.
03NTSWBFG9074 90www.nupigeco.com
PREISOLATO\NI10114.dwg
1 - info@nupigeco.com
- - - 90 160 220 750 1.000
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned 170
03NTSWBFG11074 110 1 - - - 110 200 220 750 1.000 210
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Type de tuyau: TUYAU NIRON CLIMA 11 BLEU EN PPR AVEC FIBRE DE VERRE
Structure du tuyau: Tuyau multicouche
Matériel: PPR - Fibre de verre
Caractéristiques du tuyau: SDR 11 - S 5
Couleur: Bleu avec bandes bleues foncées
Normes: E N 8075 - EN 253 - UNI EN ISO 15874 - DIN 8077 - DIN 8078
CSA B 137.11 - ASTM F 2389 - ISO 4065
L2
Dn3
L L3
Dn4
L1
Dn1
Dn2
H
CODE Dn1 Dn2 Dn3 Dn4 L1 L2 L3 L H
03NTRSCL4032 40 110 32 90 220 750 220 1000 120
03NTRSCL5032 50 110 32 90 220 750 220 1000 120
03NTRSCL5040 50 110 40 110 220 750 220 1000 120
03NTRSCL6332
03NTRSCL6340
63 125 32
63 125 40
90 220 750
110 220 750
220 1000 135
220 1000 135
FIG. 516C
03NTRSCL6350 75 140 50 110 220 750 220 1000 135
03NTRSCL7532 75 140 32 90 220 750 220 1000 150
03NTRSCL7540 Q.té
75 140Poids
40 Volume
110 220 750 220 1000 150
Code Ø Emb.
03NTRSCL7550 75 140kg/p
50 110 220 Dn1
750 Dn21000 Dn3
220 150 Dn4 L1 L2 L3 L4 L
03NTRSCL7563 palette
75 140 63 m3/p. 220 750
125 220 1000 150
03NTRSCL9050 90 160 50 110 220 750 220 1000 170
03NTRSCL403211 40/32/40 1
03NTRSCL9063 - 160 - 63
90 125- 220 40 750 1101000 32
220 170 90 220 500 220 500 1.000
90 160 75
03NTRSCL503211 50/32/5003NTRSCL9075
1 - - 140 220 750
- 50 220 1000 170
110 32 90 220 500 220 500 1.000
03NTRSCL504011 50/40/50
DRAWING No:
1 - -
ITEM: - 50
NTRSCL 110
DESC: 40 110 220 500 220 500 1.000
NI10119
03NTRSCL633211 63/32/63
REV.
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntrscl - 1 2 0
PREISOLATO\NI10119.dwg
03NTRSCL634011 63/40/63 1 -
www.nupigeco.com - info@nupigeco.com
- - 63 All dimensions
125have to be40 110 220 500 220
considered in millimeters with 5% tolerance if not otherwise mentioned
500 1.000
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
Type de tuyau: TUYAU NIRON CLIMA 11 BLEU EN PPR AVEC FIBRE DE VERRE
Structure du tuyau: Tuyau multicouche
Matériel: PPR - Fibre de verre
Caractéristiques du tuyau: SDR 11 - S 5
Couleur: Bleu avec bandes bleues foncées
Normes: E N 8075 - EN 253 - UNI EN ISO 15874 - DIN 8077 - DIN 8078
CSA B 137.11 - ASTM F 2389 - ISO 4065
L2
Dn3
L L3
Dn4
L1
Dn1
Dn2
H
CODE Dn1 Dn2 Dn3 Dn4 L1 L2 L3 L H
03NTRSCL4032 40 110 32 90 220 750 220 1000 120
03NTRSCL5032 50 110 32 90 220 750 220 1000 120
03NTRSCL5040 50 110 40 110 220 750 220 1000 120
03NTRSCL6332
03NTRSCL6340
63 125
63 125
32 90 220
40 110 220
750 220 1000
750 220 1000
135
135 FIG. 516C
03NTRSCL6350 75 140 50 110 220 750 220 1000 135
03NTRSCL7532 75 140 32 90 220 750 220 1000 150
03NTRSCL7540 75 Q.té
140 Poids110Volume
40 220 750 220 1000 150
Code Ø
03NTRSCL7550 Emb. 75 140 kg/p 110 m220
50 Dn1 220 Dn2
750 1000 Dn3
150 Dn4 L1 L2 L3 L H
75palette /p.
3
03NTRSCL7563 140 63 125 220 750 220 1000 150
03NTRSCL9050 90 160 50 110 220 750 220 1000 170
03NTRSCL1259011 125/90/125
03NTRSCL9063 1 -
90 160 63- 125 220 - 125220 225
750 1000 90
170 160 220 750 220 1.000 235
03NTRSCL12511011 125/110/125
03NTRSCL9075 1 90 -160 75- 140 220 - 125220 225
750 1000 110
170 200 220 750 220 1.000 235
03NTRSCL1609011 160/90/160 1 - ITEM: -
NTRSCL
- 160 DESC:
250 90 160 220 750 220 1.000NI10119
260
DRAWING No:
03NTRSCL16011011 160/110/160 1 - - -
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntrscl -
160 250 110 200 220 750 220 1.000 1 2260
SHEET OF
0
REV.
PREISOLATO\NI10119.dwg
03NTRSCL2009011 www.nupigeco.com
200/90/200- info@nupigeco.com
1 - - - 200
All dimensions315 90 in millimeters
have to be considered 160 with 5%220 1.000
tolerance if not 220
otherwise mentioned 1.500 325
03NTRSCL20011011 200/110/200 1 - - - 200 315 110 200 220 1.000 220 1.500 325
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
03NTRSCL2509011 250/90/250 1 - - - 250 400 90 160 220 1.000 220 1.500 410
03NTRSCL25011011 250/110/250 1 - - - 250 400 110 200 220 1.000 220 1.500 410
03NTRSCL25012511 250/125/250 1 - - - 250 400 125 225 220 1.000 220 1.500 410
03NTRSCL3159011 315/90/315 1 - - - 315 450 90 160 220 1.000 220 1.500 480
03NTRSCL31512511 315/125/315 1 - - - 315 450 125 225 220 1.000 220 1.500 480
03NTRSCL31516011 315/160/315 1 - - - 315 450 160 250 220 1.000 220 1.500 480
L2
Dn3
L L3
Dn4
L1
Dn1
Dn2
H
CODE Dn1 Dn2 Dn3 Dn4 L1 L2 L3 L H
03NTRSFG4032 40 110 32 90 220 750 220 1000 120
03NTRSFG5032 50 110 32 90 220 750 220 1000 120
03NTRSFG5040 50 110 40 110 220 750 220 1000 120
03NTRSFG6332
03NTRSFG6340
63 125 32
63 125 40
90 220
110 220
750
750
220 1000
220 1000
135
135
FIG. 517
03NTRSFG6350 75 140 50 110 220 750 220 1000 135
03NTRSFG7532 75 140 32 90 220 750 220 1000 150
03NTRSFG7540 75Q.té140 Poids
40 Volume
110 220 750 220 1000 150
Code Ø
03NTRSFG7550Emb. 75 140 kg/p50 110 3 220 Dn1
750 220Dn2
1000 Dn3
150 Dn4 L1 L2 L3 L H
03NTRSFG7563 palette
75 140 63 125m /p.
220 750 220 1000 150
03NTRSFG9050 90 160 50 110 220 750 220 1000 170
03NTRSFG403274 40/32/40
03NTRSFG9063 1 90 - 160 63 - 125 - 220 40
750 220110
1000 32
170 90 220 750 220 1.000 120
03NTRSFG9075 90 160 75 140 220 750 220 1000 170
03NTRSFG503274 50/32/50 1 - - - 50 110 32 90 220 750 220 1.000 120
03NTRSFG504074 50/40/50
DRAWING No:
1 - -
ITEM: -
NTRSFG 50 110
DESC: 40 110 220 750 220 1.000 120
NI10118
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntrsfg - 1 2
PREISOLATO\NI10118.dwg
03NTRSFG634074 63/40/63 1 -
www.nupigeco.com - info@nupigeco.com
- - 63All dimensions
125 40 110 220 750 220 1.000
have to be considered in millimeters with 5% tolerance if not otherwise mentioned
135
03NTRSFG635074
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
L2
Dn3
L L3
Dn4
L1
Dn1
Dn2
H
CODE Dn1 Dn2 Dn3 Dn4 L1 L2 L3 L H
03NTRSFG4032 40 110 32 90 220 750 220 1000 120
03NTRSFG5032 50 110 32 90 220 750 220 1000 120
03NTRSFG5040 50 110 40 110 220 750 220 1000 120
03NTRSFG6332 63 125 32 90 220 750 220 1000 135
03NTRSFG6340 63 125 40 110 220 750 220 1000 135 FIG. 517
03NTRSFG6350 75 140 50 110 220 750 220 1000 135
03NTRSFG7532 75 140 32 90 220 750 220 1000 150
03NTRSFG7540 Q.té
75 140
Poids110Volume
40 110 220 750 220 1000 150
Code Ø
03NTRSFG7550 Emb. 75 140 50 220
kg/p125 m220 Dn1220
750 Dn2
1000 Dn3
150 Dn4 L1 L2 L3 L H
03NTRSFG7563 75palette
140 63 3
/p. 750 220 1000 150
03NTRSFG9050 90 160 50 110 220 750 220 1000 170
03NTRSFG1259074 125/90/125
03NTRSFG9063 1 90 160 - 63 - 125 220- 125220
750 225
1000 90
170 160 220 1.000 220 1.000 235
03NTRSFG9075 90 160 75 140 220 750 220 1000 170
03NTRSFG12511074 125/110/125 1 - - - 125 225 110 200 220 1.000 220 1.000 235
DRAWING No:
ITEM: DESC:
03NTRSFG1609074 160/90/160 1 - - -
NTRSFG 160 250 90 160 220 1.000 220 1.000NI10118
260
SHEET OF REV.
03NTRSFG2009074 200/90/200 1
www.nupigeco.com - info@nupigeco.com
- - - 200
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
315 90
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
160 220 1.500 220 1.500 325
03NTRSFG20011074 200/110/200 1 - - - 200 315 110 200 220 1.500 220 1.500 325
03NTRSFG2509074 250/90/250 1 - - - 250 400 90 160 220 1.500 220 1.500 410
03NTRSFG25011074 250/110/250 1 - - - 250 400 110 200 220 1.500 220 1.500 410
03NTRSFG25012574 250/125/250 1 - - - 250 400 125 225 220 1.500 220 1.500 410
L2
Dn3
L L3
Dn4
L1
Dn1
Dn2
H
CODE Dn1 Dn2 Dn3 Dn4 L1 L2 L3 L H
03NTRSWBCL4032 40 110 32 90 220 750 220 1000 120
03NTRSWBCL5032
03NTRSWBCL5040
50 110
50 110
32 90
40 110
220
220
750 220
750 220
1000 120
1000 120
FIG. 517A
03NTRSWBCL6332 63 125 32 90 220 750 220 1000 135
03NTRSWBCL6340 63 125 40 110 220 750 220 1000 135
Q.té
03NTRSWBCL6350 75 140
90 Poids
Volume
50 110 220 750 220 1000 135
Code Ø03NTRSWBCL9050
Emb. 160 50 110 Dn1
220 750 Dn2
220 Dn3 170
1000 Dn4 L1 L2 L3 L H
palette90 kg/p
03NTRSWBCL9063 160 63m /p.
3 125 220 750 220 1000 170
03NTRSWBCL11063 110 200 63 125 220 750 220 1000 210
03NTRSWBFG403274 40/32/40 1
03NTRSWBCL11090- 110 200- 90 - 160 40
220 750110
220 32 210
1000 90 220 750 220 1.000 120
03NTRSWBFG503274 50/32/50 1 - - - 50 110 32 90 220 750 220 1.000 120
03NTRSWBFG504074 50/40/50 1 - -ITEM: - 50 110
DESC:
40 110 220 750 220 1.000 120
DRAWING No:
NI10120
03NTRSWBFG633274 63/32/63 1 - - - 63
NTRSWBCL 125 32 90 220 750 220 1.000 135
SHEET OF REV.
1 1 0
03NTRSWBFG634074 63/40/63
C:\Vault_Temp\Disegni\Corinna\Tabelle\Niron\Ntrswbcl -
1 -
www.nupigeco.com - info@nupigeco.com -
PREISOLATO\NI10120.dwg
- 63 125 40 110 220 750 220 1.000
All dimensions have to be considered in millimeters with 5% tolerance if not otherwise mentioned
135
03NTRSWBFG635074 63/50/63 1 - - - 63 125 50 110
All right reserved - Drawing cannot be reproduced in anyway, failure todo so will entitle nupigeco to legal action. Information on this document are subject to change without notice
220 750 220 1.000 135
03NTRSWBFG905074 90/50/90 1 - - - 90 160 50 110 220 750 220 1.000 170
03NTRSWBFG906374 90/63/90 1 - - - 90 160 63 125 220 750 220 1.000 170
03NTRSWBFG1106374 110/63/110 1 - - - 110 200 63 125 220 750 220 1.000 210
03NTRSWBFG1109074 110/90/110 1 - - - 110 200 90 160 220 750 220 1.000 210
5.6 OUTILLAGE
Matériel: Métal
Normes: UNI 10566
(B) Gamme: ø16 ÷ ø315 mm
Notes: *Le coupe tube à guillotine est construit selon les prescriptions de la norme UNI 10566.
Indispensable pour le soudage d’un tube parfaitement coupé. Facilité d’usage: design spécifique
permettant l’usage dans la fente. La partie inferieure peut être ouvert afin de couper des tubes sou-
terrains encore raccordés. Notice d’utilisation comprise.
FIG. 611
Poids Volume
Code Type Ø Emb. kg/p m3/p.
00TT1540 A Cisaille 16 ÷ 40 1 1,000 -
19SCUT B Circulaire 50 ÷ 125 1 1,700 -
00TA2 * C Guillotine max 225 (< SDR11) 1 19,800 0,0760
00TA3 * C Guillotine max 315 (< SDR11) 1 61,600 0,3937
RACLEUR MANUEL
RACLEUR ROTATIF
Matériel: Métal
Normes: UNI 10566
(A) Gamme: ø25 ÷ ø400 mm
(B)
FIG. 613
ALIGNEUR À SANGLES
Matériel: Métal
Normes: UNI 10566
Gamme: ø20 ÷ ø400 mm
FIG. 614
Poids Volume
Code Ø Emb. Kg/p m3/p.
00ALL063/4 20 ÷ 63 1 4,800 0,0168
00ALL225/4 50 ÷ 225 1 20,800 0,0642
00ALL315/4 225 ÷ 400 1 87,000 0,3375
FIG. 615
FIG. 616
FIG. 616A
FIG. 616C
Ø Poids
Code Emb. Kg/p
trous
00MARP7 6 max 1+1 0,100
00MARP11 10 max 1+1 0,100
OUTIL D’ALIGNEMENT
Matériel: Métal
FIG. 626
D2
L
FIG. 627
LF
L
FIG. 628
FIG. 630
CARACTÉRISTIQUES TECHNIQUES
Conforme aux exigences CE.
Conforme à la norme UNI 10566 – Type MULTIFONCTION
Lecteur codes barre conforme à la norme ISO 13950 et réglage manuel de la
durée et de la tension
Ecran illuminé avec 4 lignes de 20 caractères
Mémoire pour 10.000 cycles de soudage
8 mémoires de 500 paramètres pour les essais de pression
Plage de travail des raccords jusqu’à 100 Amp crête maximum (00E9001) - jusqu’à 40 Amp
crête maximum (00E9001L)
Capteur de contrôle de la température ambiante
Alimentation: 230V / 115V /48V E 50Hz/60Hz
Puissance maximum: 2.500 VA (00E9001) - 1.000 VA (00E9001L)
Tension de sortie: From 5 to 42 V
Câble d’alimentation: L= 3,8 m
Câble de soudage: L= 3 m
Connecteurs - 4 mm (code 00S8305) avec adaptateurs 4,7mm (code 00S8203)
Dimensions: 340x450xH220 mm
Poids: 25,2 kg (code 00E9001) - 13,0 kg (code 00E9001L)
Classe de protection: IP 54
Température de travail: de -18° à + 55°C
FIG. 617
Poids Volume
Code Tyoe Ø Emb. Kg/p Notes
m3/p.
00E9001L A 20 ÷ 160 1 13,000 0,0104 Version légère
00E9001 B 20 ÷ 630 1 26,000 0,0575 Avec système Bluetooth intégré
FIG. 618
La machine pour soudage bout à bout comprend: la machine de base, le réchauffeur, l’unité hydraulique,
une raboteuse électrique, une paire de tubes hydrauliques flexibles, une caisse en acier pour le réchauffeur
et les outils de la raboteuse avec réductions.
FIG. 619
Dimensions totales de la machine complète avec no. 1 caisse de transport no. 1 caisse de transport no. 1 caisse de transport
réductions 120x80x74 cm 120x80x74 cm 120x80x85 cm
Puissance maximum absorbée 2,55 kW - 230 Volt - 50/60 Hz 3,05 kW - 230 Volt - 50/60 Hz 3,80 kW - 230 Volt -50/60 Hz
MACHINE DE BASE
Dotée de 4 pinces principales montées sur une structure inclinée, rail coullisant trémpé chromé, troisième
pince ajustable, raccords rapides anti-gouttes et séparation automatique de la thermoplaque.
Poids 39 Kg 56 Kg 65 Kg
INFORMATIONS TECHNIQUES
RÉCHAUFFEUR
Revêtu en PTFE avec réglage de température à distance et câble d’alimentation avec connecteur à la
boîte thermostatique.
UNITÉ HYDRAULIQUE
Equipée d’un manomètre - Classe 1,0 (0 ÷ 160 bar - Ø 100 mm), robinet à papillon et levier de
commande, raccords rapides anti-gouttes.
Dimensions 280x430x310 mm
Caractéristiques pompe cylindrée 1,2 cm³ débit 1.58 l/min; régime 1.400 r/min
Poids 25 Kg
RABOTEUSE ÉLECTRIQUE
Dotée d’un positionneur et d’un micro-interrupteur de sécurité pour éviter une mise en marche
involontaire.
Poids 8 Kg 14,2 Kg 26 kg
Longueur 4m
Poids 1,5 Kg
INFORMATIONS TECHNIQUES
Poids 7,5 Kg 9 Kg 11 kg
FIG. 618A
FIG. 618B
KIT DE RÉDUCTIONS
RÉDUCTIONS
FIG. 618C
Pour machines à 00S10160KIT 00S10250KIT 00S10315KIT
souder Mod. Ø 40 ÷ 160 Ø 63 ÷ 250 Ø 90 ÷ 315
Poids Volume
Code Ø Emb. Kg/p m3/p.
00S10160WA 90 ÷ 160 1 60,000 0,35
Poids Volume
Code Ø Emb. Kg/p m3/p.
00S10315WA 90 ÷ 315 1 33,000 0,85