Documente Academic
Documente Profesional
Documente Cultură
Q.1 Answer the following in brief. Draw figures, if required to explain your point. (04 x 05)
(a) What is working from whole to part and why survey is carried out from
whole to part instead of part to whole?
(b) What are the differences between W.C.B. and Q.B.?
(c) What is contour interval? What are the criterion for selection of
contour interval for a map?
(d) What is orienting a plane table? How is orientation achieved by
backsighting?
Q.2 During the measurement in catenary of a survey line, the following (20)
information was obtained:
Measured length Temp Difference in level between ends Tension
(m) (°C) (m) (N)
29.981 30 0.15 120
T • • •
1
Q.4 Discuss the Intersection method of plane table survey. Draw figure to explain.
(15)
Q.5 For the incomp!ete level field book table, find out the Reduced Levels (R.L.$)
(20)
of stations A to G. Use Rise and Fall method OR Height of Instrument
method. Complete the table and apply appropriate checks for the method used.
Write steps for R.L. calculation of any "one" station.
Station C'
El .C. . . F.S. R.L.
IS
Remarks
A 3.92 9
B 1.46 7.78
C 7.05 3.27
D 2.36 9
E 4.81 0.85 9
F 8.63 2.97
G 7.02 3.19
4.28 1127.300 T.B.M.