Documente Academic
Documente Profesional
Documente Cultură
Congratulations on choosing “Bajaj CT-100” motorcycle, one of the finest motorcycles in the
country brought to you by Bajaj Auto Limited.
Before you prepare for riding, please read this User's Guide carefully to familiarize yourself with
the mechanism and the controls of the vehicle.
To maintain your bike in perfect running condition to deliver consistent performance, we
earnestly advise you to avail periodic services, at Bajaj Dealers.
You can entrust Bajaj Dealers, who are well equipped with all necessary facilities, skill sets and
trained manpower for servicing and repairs of your “Bajaj CT-100”. In the rare event of going to
a local garage, always insist on Genuine Bajaj Spares to ensure safety, performance and longer
life of your vehicle.
Should you require any additional information, please approach Bajaj Dealers. If necessary, you
may also write to selling dealers, with relevant details like Registration no. Chassis no., Engine
no., Date of purchase, Kms. run, name of selling dealer and your contact numbers.
Finally, may we request you to give your motorcycle a proper care and regular maintenance, as
described in this manual. We are sure this will offer you a long trouble-free ownership
experience.
Wishing you unlimited miles of happiness!
International Marketing
BAJAJ AUTO LIMITED
Akurdi Pune - 411 035 India
DOC. NO. 71111342 REV. 01, July 11 Modifications on the vehicle, parts or accessories as may be convenient and
necessary.
1 2
1 4
5
6
1. Speedometer : selected with engine running, Hi beam Steering cum Ignition Lock : To Lock the Steering : To lock the steering,
The Speedometer pointer shows the speed indicator will be lit. (Symbol is visible under It has three positions. turn the handle bar to the left or right. Push
of vehicle. lit condition). & release the key. Turn the key to “LOCK”
position and remove the key.
2. Odometer : 5. Turn Signal Indicator (LH & RH) : LOCK : Steering locked. Ignition
The Odometer shows the total distance When Turn signal switch is turned to Left OFF. To Unlock the Steering : To unlock the
that the vehicle has accumulated. or Right, Turn pilot indicator will flash. steering, insert the key in steering cum
3. Neutral Indicator : (Symbol is visible under lit condition). ignition lock & turn it clockwise to “OFF” or
OFF : Steering unlock. Ignition
When the transmission is in Neutral and 6. Steering Lock cum Ignition Switch : OFF. “ON” position.
Ignition switch ‘ON’, the Neutral indicator Key operated switch for Ignition ON/OFF
is lit. (Symbol is visible under lit condition). Key : A common key is used for ‘Steering
& locking handle bar. ON : Steering unlock. Ignition cum Ignition lock’, ‘Fuel tank cap’ and ‘Side
4. Hi Beam Indicator : ON. cover lock’.
When Headlight is ‘ON’ and Hi beam is
3 4
A D
Fuel Tank
Cap
B
RES
OFF
Fuel Tap C
ON
Fuel Tank Cap Fuel Tap Left Handle Bar Switches C. Horn Button : ( ) Press horn button for
• To open the fuel tank cap, insert the key Fuel tap lever has following positions. A. Dipper Switch : When headlight is ON, sounding horn.
in the lock and turn it clockwise and lift High or Low beam can be selected with
ON : When fuel level is above Reserve D. Pass Switch : Press the switch to flash
fuel tank cap. the dipper switch. Hi beam indicator light
position. the head light. It is used to give signal to
• ‘Fuel Tank Cap’ is locked when pushed \ located on Speedo console will light up vehicles coming from opposite side while
pressed back into the place. RES : When fuel level is below Reserve when high beam is selected. overtaking.
position.
: High Beam : Low beam
OFF : When fuel supply is to be cut off.
B. Turn Signal Switch : When the turn
signal switch is turned to Left ( ) or
Right ( ), the corresponding turn signals
flash on and off. To stop flashing, push
the switch in and release.
5 6
B A A B
Side Side
Cover Cover
RH RH
C D
E
Right Handle Bar Switches F. Ride Control Switch : Removal of Side Cover LH & RH • Similarly ‘Side cover’ RH can be removed
E. Head Light Switch : It has 3 positions. The function of ‘Ride Control’ is to make after removing screw (D).
• Insert the key into the cover lock (C) and
rider to sense Economy zone of throttle for turn the key clockwise & pull the ‘Side
All lamps 'OFF'. better fuel efficiency. When ‘Ride Control’ cover’ LH out from the bottom.
While engine running, Tail lamp, Meter is in ‘ON’ position, on opening the throttle,
lamp and Pilot lamp/s ‘ON’. at particular position one will feel slight • Pull ‘Side cover’ from (A) to release Lug
resistance to the rotation of throttle grip. provided on ‘Side cover’ from hole
While engine running, Head lamp, Pilot provided on ‘Frame’.
This indicates the end of fuel Economy
lamp, Tail lamp and Meter lamps ‘ON’.
zone. However throttle can be rotated • Slide the ‘Side Cover’ forward (towards
further to get higher speed. When switch is the engine) from location (B) to release
in ‘OFF’ position, the resistance to the slot provided on front side of ‘Side cover’
throttle rotation is not sensed. Thus there from bracket with rubber cap provided on CAUTION : Remove cover as described
will be no indication of fuel Economy zone. ‘Fuel Tank’. Take out ‘Side cover’. above, otherwise the lugs may break.
7 8
B A A B Battery
Side Side
Cover Cover Tool Kit
RH RH
C D
Fitment of Side Cover LH & RH • For ‘Side cover’ RH adopt same Battery Tool Kit Location
procedure and fit the screw (D) properly.
• Match slot (B) provided on front side of • It is located inside the ‘Side Cover’ LH. • It is located below the seat on rear
‘Side Cover’ with bracket provided on mudguard.
• Always maintain electrolyte level in each
‘Fuel Tank’ and slide ‘Side cover’
cell between upper and lower level lines • A rubber strap is provided to hold the
backward (towards Tail lamp).
by adding distilled water. tool kit.
• Match Lug (A) provided on rear side of
‘Side cover’ with hole provided on ‘Frame’
and press ‘Side cover’ inside.
CAUTION : Always fit rubber strap to
• Match the lock plate of ‘Side cover’ hold the tool kit.
properly with bracket on ‘Chassis’ and
Lock. (For ‘Side cover’ LH). CAUTION : Fit cover as described
above to ensure proper fitment.
9 10
Front Brake Rear Brake • During first 2000 kms running-in period do
not exceed following speed limits. Starting the Engine :
Adjuster Adjuster • Keep the fuel tap to ON or RES position.
Kms 1st 2nd 3rd 4th • Turn ignition switch to ON position.
• Confirm that the vehicle (transmission) is in
0 - 1000 15 30 45 55 neutral.
1000 - 2000 20 40 60 75 • If the engine is cold or when starting for first
time, use choke for quick starting. Choke
• Always keep the speed below the limits
Front Brake Adjustment Rear Brake Adjustment lever (A) is located on LH side switch.
mentioned in the table. • Keep the throttle completely closed, and
For safe riding the brakes must always be Rear brake is properly adjusted if -
• Do not race the engine excessively. kick the engine with kick starter lever.
maintained in perfect condition. Brake is
• The wheel rotates freely when the brake • Do not start moving or race the engine • When the engine is warmed up enough to
properly adjusted if -
pedal is in the resting position. immediately after starting. Run the engine idle without using choke, return the choke to
• The wheel rotates freely when the control
• The braking action starts after Brake pedal for a minute at idle speed to give the oil a OFF position.
lever is in the resting position.
is pressed by 20-30 mm. chance to work-up into the engine. A1 : Choke “OFF”
• The braking action starts after Front brake
These conditions are obtained by adjusting the A1 A2 : Choke “ON”
lever is pressed by 2-3 mm. Riding the Bike A
cables by means of adjuster shown in figure.
These conditions are obtained by adjusting the Before starting the vehicle & with the ignition
cables by means of adjuster shown in the WARNING : Both brakes, front and key ‘OFF’, adhere to the following first thing A2
figure & minor play adjustments can be done rear must be maintained in perfect in the morning or after a long period of non-
by adjuster provided near front brake lever. use (whichever is the case).
condition, for road safety.
11 12
Moving Off : you want to stop for more than two minutes.
high speed that 4 Parking :
• Check that Center/Side stand is up. engine rpm rises • Shift the transmission into neutral and turn Vehicle Maintenance (Ensure Following)
• Depress the clutch lever. excessively & which may cause rear the ignition switch OFF.
• Shift into 1st gear. wheel to skid. • Support the motorcycle on a firm level
Fuel Check fuel lines and connections for
• Open the throttle and release the clutch leakage.
surface with the center or side stand.
lever slowly and simultaneously. Braking : Spark plug Inspect and clean spark plug. Adjust
• As the clutch starts to engage, open the CAUTION: Do not park on a soft/steeply electrode gap.
• Close the throttle completely, leaving the clutch engaged
throttle a little more, giving the engine just inclined surface or the motorcycle may
(except where shifting gears) so that the engine braking Air filter Clean air filter element periodically.
enough rpm to keep it from stalling. fall over.
will help slow down the motorcycle.
Engine oil Check level. Use recommended oil for
Shifting Gears : • Shift down one gear at a time so that you are in Neutral Fuel Saving Tips top up or refill.
when you come to a complete stop. • Drive smoothly & steadily at speed between
• Close throttle & depress the clutch. Brakes Ensure that the brakes are not dragging
• When stopping, always apply both brakes at the same 40 and 50 km/h .
• Shift into next higher or lower gear. / binding.
time. De-clutch as necessary to keep engine from stalling. • Drive at constant speed; avoid sudden
• Open the throttle and release the clutch • Never lock the brakes, or it will cause the tyres to skid.
lever slowly and simultaneously. accelerations & harsh braking as far as Clutch Ensure correct clutch lever play.
When cornering, use brakes judiciously & do not de- possible. Plan your trips properly with Tyre pressure Always maintain the recommended tyre
clutch. Reduce your speed before you get into the corner. minimum start-stops. pressure.
For emergency braking, disregard downshifting, and • Change the gear judiciously according to the
concentrate on applying the brakes as hard as possible speed requirements. Drive as far as possible Carburettor Adjust idling speed.
without skidding. in highest gear.
13 14
15 16
17 18
19 20
21 22
RECOMMENDED FREQUENCY 1. Fill adequate petrol into petrol tank for proper flow of petrol to the carburettor. q
Sr. Operation 2. Check all locks, P.T. cap, ignition switch, steering lock, Side cover. q
No. Servicing 1st 2nd 3rd 4th 5th 6th 7th
Kms 750 5000 10000 15000 20000 25000 30000 3. Check for smooth operation for fuel cock. q
33. Drive chain ‘O’ ring type (If applicable) L At every 500 Kms 4. Check engine oil level and top up if required. q
5. Check all controls for proper free play and function :- Accelerator, clutch lever, front brake lever,
34. Drive chain remove, clean, inspect'
rear brake pedal / lever, choke lever. (As applicable to certain model). q
& lubricate (O/H) CL, L CL, L CL, L CL, L At every 10000km
6. Check gear shifter lever for proper position and working. q
35. Drive chain link lock R R R R Replace at every 10000km
7. Inspect rear shock absorber for proper setting & correct if required. (As applicable to certain model). q
36. Wheel brg (for non sealed brgs only) C, L C, L At every 20000km
8. Check / Adjust chain slackness appropriately. Lubricate if required. q
37. Tyre tread wear C, R C, R C, R C, R C, R C, R At every 5000kms i.e. at
9. Check brakes and adjust if required. q
every service after 2nd ser.
10. Check and top up brake fluid level. (As applicable to certain model). q
38. Front fork oil R R Replace at every 20000km
11. Check and adjust tyre air pressure to the recommended value. q
39. Auto choke, Thermal sensor (If Appl) C, A C, A C, A C, A C, A C, A C, A C, A At every 5000km
12. Check battery terminal voltage, specific gravity, electrolyte level. Charge the battery if required.
40. TPS (If Appl) C, A C, A C, A C, A C, A C, A C, A C, A C, A At every 5000km Check connection at terminal, starter relay and apply petroleum jelly on terminals if required. q
41. RSA - Check gas pressure (If Appl) C, A C, A C, A At every 20000km 13. Check and adjust steering freeness. q
42. Starter cl. bush kit for dry type (If Appl) CL, R CL, R CL,R (If applicable) 14. Check front mudguard alignment w.r.t. front wheel. q
43. Clutch switch cleaning (If Appl) CL CL CL CL 15. Check all important nuts and bolts for proper torque and tightness. q
44. General lubrication L L L L L L L L 16. Fit all O.E. accessories like mirror, leg guard etc. (As applicable to certain model). q
45. Swing arm pivot pin lubrication L L Lubricate at every 20000km 17. Start vehicle, check idling and CO%. q
46. Eng foundation silent bush (If applicable) R R R Replace at every 15000km 18. Check all switches, meters, horn and lights for proper functioning. q
19. Test drive the vehicle. q
C : Check, A : Adjust, CL : Clean, R : Replace, T : Tighten, L : Lubricate 20. Check for oil leakage and rectify if any. q
Note : Periodic parts / lubricants to be replaced as per Periodic Maintenance and Lubrication Chart are mandatory and 21. Repair for any other defects seen or observed during the test drive before cleaning the vehicle. q
the same are chargeable to customer. 22. Clean the vehicle / washing before delivery. q
23 24
27. Check batt. voltage, electrolyte level & top up if reqd. with distilled water. Route cables & fit terminal caps properly, Clean terminals & apply petroleum jelly.
Genuine
28. Start engine, check & adjust horn & all lights, TPS, auto choke, thermal sensor. (If applicable)
IN ASSAM, KARNATAKA, MANIPUR, M.P., 57.43
NAGALAND, U.P.,
& UTTARANCHAL IN OTHER STATES 55.58
29. Check idling and CO%. Tune engine & carburetor if required.
30. Rear shocker gas pressure at every 20,000 kms. for proper functioning. (If applicable)
31. Carry out any additional work if required.
32. Check tyre wear & inflate air pressure in the tyre.
33. Test ride the vehicle.
34. Clean the vehicle at the time of delivery. Golden Hologram Price Label
Note : Above jobs are applicable as per Periodic Maintenance Schedule.
25 26