Documente Academic
Documente Profesional
Documente Cultură
Cylinders
I
ISO 6020/1 cylinders for
working pressures up to 160 bar
Catalogue HY07-1215/UK
February 2006
Catalogue HY07-1215/UK Roundline Cylinders
Introduction MMB Series
Visit us at www.parker.com/uk
Standard Specifications
• Heavy Duty construction • Temperature range of standard seals: -20oC to +80oC
• Styles and dimensions to: CETOP RP58H, ISO 6020/1 • Construction: head and cap bolted to heavy steel flanges
• Rated pressure: 160 bar • Bore sizes: 40mm to 320mm
• Fatigue-free at the rated pressure • Piston rod diameters: 22mm to 220mm
• Hydraulic mineral oil – others on request
2
11 2
9
7
8 10
4 3 5
6
Note: In line with our policy of continuing product improvement, specifications in this catalogue are subject to change without notice.
2 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Design Features and Benefits MMB Series
10 Piston Seals
Standard and chevron-type piston seal options are available,
to suit different applications – see page 10. In addition, MMB
cylinders can be designed and manufactured to suit individual
customer requirements. Please contact the factory for details.
3 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Rectangular Flange Mountings MMB Series
1
ZB + stroke
EE Y PJ + stroke
2 4R E B D
3 FB MF
TF VD
UF W
Style MF1
Head Rectangular Flange
EE PJ + stroke
Y
1
4
2 R E
3
TF FB W MF
UF ZF + stroke
Style MF2
Cap Rectangular Flange
Dimensions – MF1 and MF2 See also Rod End Dimensions, page 8
MM + stroke
Bore Rod B D EE FB
Rod E MF R TF UF VD W Y ZB
Ø No. f8 max (BSPP) h13 PJ ZF
Ø max
1 22
40 50 78 80 G1/2 9 16 40.6 98 115 3 16 71 97 198 206
2 28
1 28
50 60 95 100 G1/2 11 20 48.2 116.4 140 4 18 72 111 213 225
2 36
1 36
63 70 116 120 G3/4 13.5 25 55.5 134 160 4 20 82 117 236 249
2 45
1 45
80 85 130 135 G3/4 17.5 32 63.1 152.5 185 4 22 91 134 262 282
2 56
1 56
100 106 158 160 G1 22 32 76.5 184.8 225 5 25 108 162 314 332
2 70
1 70
125 132 192 195 G1 22 32 90.2 217.1 255 5 28 121 174 341 357
2 90
1 90
160 – – – – – – – – – – – – – – –
2 110
1 110
200 – – – – – – – – – – – – – – –
2 140
1 140
250 – – – – – – – – – – – – – – –
2 180
1 180
320 – – – – – – – – – – – – – – –
2 220
4 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Round Flange Mountings MMB Series
1 22½º
ZB + stroke
EE Y PJ + stroke
.c.d.
2 FC p 4 B D
FB
3 F
UC VD
Style MF3 WC
Head Circular Flange Accurate location of 'B' provided as standard on model MF3 only.
1 22½º
EE Y PJ + stroke
.c.d.
2 FC p 4 B D
FB
3 K F
UC ZP + stroke
Style MF4
Cap Circular Flange
Dimensions – MF3 and MF4 See also Rod End Dimensions, page 8
MM + stroke
Bore Rod B D EE FB FC UC VD
Rod F K WC Y ZB
Ø No. f8 max (BSPP) h13 js13 max min PJ ZP
Ø max
1 22
40 50 78 G1/2 16 9 106 13 125 3 16 71 97 198 206
2 28
1 28
50 60 95 G1/2 20 11 126 14 148 4 18 72 111 213 225
2 36
1 36
63 70 116 G3/4 25 13.5 145 16 170 4 20 82 117 236 249
2 45
1 45
80 85 130 G3/4 32 17.5 165 18 195 4 22 91 134 262 282
2 56
1 56
100 106 158 G1 32 22 200 20 238 5 25 108 162 314 332
2 70
1 70
125 132 192 G1 32 22 235 23 272 5 28 121 174 341 357
2 90
1 90
160 160 232 G11/4 36 22 280 25 316 5 30 143 191 386 406
2 110
1 110
200 200 285 G11/4 40 26 340 30 385 5 35 190 224 466 490
2 140
1 140
250 250 365 G11/2 56 33 420 32 500 8 40 205 290 570 606
2 180
1 180
320 320 450 G11/2 63 39 520 37 600 8 45 250 358 684 723
2 220
5 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Pivot Mountings MMB Series
CD
D Y PJ + stroke
EE 1
MR
2 4
3
EP K L
XC + stroke
EX
Style MP3
Cap Fixed Eye
CX
D Y PJ + stroke
EE 1
4° 4° MS
2 4
3
EP K LT
XO + stroke
Style MP5 EX
Cap Fixed Eye
with Spherical Bearing
Dimensions – MP3 and MP5 See also Rod End Dimensions, page 8
MM CD H9 L MR + stroke
Bore Rod D EE EX
Rod & EP K & & Y
Ø No. max (BSPP) h12 PJ XC & XO
Ø CX H7 LT MS
1 22
40 20 78 G1/2 18 20 13 41 25 71 97 231
2 28
1 28
50 25 95 G1/2 22 25 14 52 32 72 111 257
2 36
1 36
63 32 116 G3/4 27 32 16 65 40 82 117 289
2 45
1 45
80 40 130 G3/4 35 40 18 82 50 91 134 332
2 56
1 56
100 50 158 G1 40 50 20 95 63 108 162 395
2 70
1 70
125 63 192 G1 52 63 23 103 71 121 174 428
2 90
1 90
160 80 232 G11/4 66 80 25 135 90 143 191 505
2 110
1 110
200 100 285 G11/4 84 100 30 165 112 190 224 615
2 140
1 140
250 125 365 G11/2 102 125 32 223 160 205 290 773
2 180
1 180
320 160 450 G11/2 130 160 37 270 200 250 358 930
2 220
6 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Foot and Trunnion Mountings MMB Series
TE
Y PJ + stroke
EE
1
EH
2 4 D
LH
3 S S
TS SB
XS
US SS + stroke
ZD + stroke
Style MS2
Foot Mounting
Y PJ + stroke
1 BD
EE
R3
TD 2 4 UV D
K
3
TL TL
TM XV
ZB + stroke
Style MT4 Note: XV Dimension to be specified by customer. Where the minimum dimension
Intermediate Fixed Trunnion is unacceptable, please consult the factory.
Dimensions – MS2 and MT4 See also Rod End Dimensions, page 8
MM D& Min. + stroke
Bore Rod BD EE LH SB TD TL TM TS US UV XV
Rod TE EH K S XS Y Stroke
Ø No. max (BSPP) h10 H13 f8 js15 h12 Js13 max min XV ZB
Ø max MT4 PJ SS max max ZD
1 22
40 30 78 G1/2 82 13 43 25 11 20 16 90 100 120 78 19.5 130 71 37 97 183 93 198 215
2 28
1 28
50 35 95 G1/2 100 14 52 32 14 25 20 105 120 145 95 22 142 72 40 111 199 102 213 237
2 36
1 36
63 45 116 G3/4 120 16 62 32 18 32 25 120 150 180 116 29 160 82 53 117 211 107 236 256
2 45
1 45
80 50 130 G3/4 135 18 70 40 22 40 32 135 170 210 130 34 180 91 53 134 236 122 262 290
2 56
1 56
100 60 158 G1 161 20 82 50 26 50 40 160 205 250 158 32 210 108 58 162 293 152 314 350
2 70
1 70
125 75 192 G1 196 23 100 56 33 63 50 195 245 300 195 32 235 121 78 174 321 157 341 381
2 90
1 90
160 90 232 G11/4 238 25 119 60 33 80 63 240 295 350 240 36 273 143 96 191 364 177 386 430
2 110
1 110
200 110 285 G11/4 288 30 145 72 39 100 80 295 350 415 390 39 337 190 70 224 447 267 466 522
2 140
1 140
250 135 365 G11/2 – 32 – – – 125 100 370 – – 480 – 393 205 95 290 – 298 570 –
2 180
1 180
320 175 450 G11/2 – 37 – – – 160 125 470 – – 600 – 486 250 116 358 – 370 684 –
2 220
7 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Piston Rod End Data MMB Series
Wrench Flats
Piston rods up to and including 140mm in diameter are supplied
with the wrench flats D shown in the table below. Rods above NA KF MM
140mm in diameter feature four drilled holes to accept a pin
wrench.
D
Wrench Flats
VE
Rod End Dimensions
MM Style 4 Style 7 Style 9
Bore Rod
Rod D NA VE WF
Ø No.
Ø KK A KK A KF A
1 22 M16x1.5 22 – – M16x1.5 22 18 21
40 19 32
2 28 M20x1.5 28 M16x1.5 22 M20x1.5 28 22 26
1 28 M20x1.5 28 – – M20x1.5 28 22 26
50 24 38
2 36 M27x2 36 M20x1.5 28 M27x2 36 30 34
1 36 M27x2 36 – – M27x2 36 30 34
63 29 45
2 45 M33x2 45 M27x2 36 M33x2 45 39 43
1 45 M33x2 45 – – M33x2 45 39 43
80 36 54
2 56 M42x2 56 M33x2 45 M42x2 56 48 54
1 56 M42x2 56 – – M42x2 56 48 54
100 37 57
2 70 M48x2 63 M42x2 56 M48x2 63 62 68
1 70 M48x2 63 – – M48x2 63 62 68
125 37 60
2 90 M64x3 85 M48x2 63 M64x3 85 80 88
1 90 M64x3 85 – – M64x3 85 80 88
160 41 66
2 110 M80x3 95 M64x3 85 M80x3 95 100 108
1 110 M80x3 95 – – M80x3 95 100 108
200 45 75
2 140 M100x3 112 M80x3 95 M100x3 112 128 138
1 140 M100x3 112 – – M100x3 112 128 138
250 64 96
2 180 M125x4 125 M100x3 112 M125x4 125 – 175
1 180 M125x4 125 – – M125x4 125 – 175
320 71 108
2 220 M160x4 160 M125x4 125 M160x4 160 – 214
8 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Accessories MMB Series
Rod Eye with Spherical Bearing – ISO 6982 Rod Eye with Plain Bearing – ISO 6981
EM
C max. EN C max.
BX
EF ER
CN 4° CK
LF LE
CH CA
AX AW
min.
KK KK
b b
Note: To obtain the same pin diameter at the head and cap ends of pivot-mounted cylinders (Styles MP3 and MP5), a style 4 rod end should be
specified with a No.1 rod, and a style 7 rod end should be specified with a No.2 rod. This ensures that the correct rod end thread is supplied to accept
the appropriate spherical bearing or plain bearing rod eye – see Rod End Dimensions, page 8.
40 149333 16 20 45 70 10 11 4.3 21 60 90 20
FN
50 149334 25 25 55 80 12 13.5 5.4 26 80 110 32
FK
63 149335 25 32 65 100 15 17.5 5.4 33 110 150 50
80 149336 36 40 76 120 16 22 8.4 41 125 170 80
FS
100 149337 36 50 95 140 20 26 8.4 51 160 210 125 KC CO
TH NH
125 149338 50 63 112 180 25 33 11.4 61 200 265 200
UL
160 149339 50 80 140 220 31 39 11.4 81 250 325 320
9 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Theoretical Forces, Mountings, Seals MMB Series
If this force is not large enough, repeat the process with a higher Load Holding Option
system operating pressure or cylinder diameter. Suitable for applications where loads are required to be held
in position, the Load Holding option combines standard gland
Deduction for Pull Force seals (see above) with chevron pistons which feature a two-
piece piston with a wide bearing ring mounted between chevron
Piston Piston Reduction in Force in kN seals. The load holding option may be used for piston speeds up
Rod Rod to 0.5m/s.
Ø Area 10 40 63 100 125 160
mm mm2 Bar Bar Bar Bar Bar Bar
Chevron Option
22 380 0.4 1.5 2.4 3.8 4.8 6.1 Suitable for harsh environments such as steel mills, chevron
28 616 0.6 2.5 3.9 6.2 7.7 9.9 seals may also be used to hold a load in position. They are
36 1018 1.0 4.1 6.4 10.2 12.7 16.3 suitable for use with all fluid groups and for piston speeds up
45 1590 1.6 6.4 10.0 15.9 19.9 25.5 to 0.5m/s. Chevron gland seals have a steel retainer, and a
separate removable steel housing which retains the inner
56 2463 2.5 9.9 15.6 24.6 30.8 39.4
bearing rings. A heavy duty wiper seal prevents the ingress of
70 3848 3.8 15.4 24.2 38.5 48.1 61.6 contaminants. Chevron pistons feature a two-piece piston with a
90 6362 6.4 25.5 40.1 63.6 79.6 102 wide bearing ring mounted between chevron seals.
110 9503 9.5 38.0 59.9 95.1 119 152
140 15394 15.4 61.6 97.0 154 193 246
180 25447 25.4 102 160 254 318 407
220 38013 38.0 152 240 380 475 608
10 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Piston Rods MMB Series
Piston Rod Size Selection For tensile (pull) loads, the rod size is selected by specifying
To select a piston rod for thrust (push) conditions: standard cylinders with standard rod diameters and using them
at or below the rated pressure.
1. Determine the mounting style and rod end connection to
be used. Consult the Stroke Factor table on page 12 and Long Strokes and Stop Tubes
identify the appropriate factor for the application. For long stroke cylinders under compressive loads, the use of
a stop tube should be considered, to reduce bearing stress.
2. Using this stroke factor, determine the 'basic length' from the Selection of a stop tube is described on page 12.
equation:
Cushion Sleeve Stop Tube
Basic Length = Net Stroke x Stroke Factor
The correct piston rod diameter is read from the curved line
above the point of intersection.
Fixed Mountings
Pivot Mountings
No Stop Tube
Required
11 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Stroke Factors MMB Series
Stop Tubes
The Piston Rod Selection Chart on page 11 indicates where the When specifying a cylinder with a stop tube, please insert an S
use of a stop tube should be considered. The required length of (Special) and the net stroke of the cylinder in the order code and
stop tube, where necessary, is read from the vertical columns state the length of the stop tube. Note that net stroke is equal to
on the right of the chart, by following the horizontal band the gross stroke of the cylinder less the length of the stop tube.
within which the point of intersection lies. Note that stop tube The gross stroke determines the envelope dimensions of the
requirements differ for fixed and pivot mounted cylinders. cylinder.
If the required length of stop tube is in the shaded region marked inPHorm
'consult factory', please submit the following information.
For accurate sizing, please refer to the European cylinder
inPHorm selection program (1260/Eur).
1. Cylinder mounting style.
2. Rod end connection and method of guiding the load.
3. Bore and stroke required, and length of rod extension
(Dimension 'K') if greater than standard.
4. Mounting position of cylinder. If at an angle or vertical,
specify the direction of the piston rod.
5. Operating pressure of the cylinder if limited to less than the
standard pressure for the cylinder selected.
MF1
Fixed and MF3 0.5
Rigidly Guided MS2
12 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Cushioning MMB Series
The energy absorption capacity of the cushion decreases with E = 10000 x 0.52 – 10000 x 9.81 x 40 x 0.26
drive pressure, which in normal circuits is the relief valve setting. 2 103
E = 1250 – 1020 = 230 Joules
inPHorm
Cushioning requirements can be calculated automatically Note that, as velocity is greater than 0.3m/s, the energy absorption
for individual cylinder/load combinations using the European figures obtained from the charts on page 14 should be reduced
cylinder inPHorm selection program (1260/Eur). by 25% – see Cushion Calculations, opposite. Comparison with
the cushioning chart curve for this cylinder shows an energy
capacity for the head end of 400 Joules. Reducing this by 25%
gives a capacity of 300 Joules, so the standard cushion can
safely decelerate the 230 Joules in this example.
13 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Cushioning MMB Series
Head End, No.1 and No.2 Rods Cap End, No.1 and No.2 Rods
Energy (Joules)
Energy (Joules)
14 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Seals, Fluids and Masses MMB Series
Filtration
Fluid cleanliness should be in accordance with ISO 4406. The
quality of filters should be in accordance with the appropriate
ISO standards.
15 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Ports MMB Series
Flange Ports
A
ED
EB
FF
EA
16 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Replacement Parts and Service MMB Series
17
7
69a
18
34/35/36/37
26
70a
73
69
20 70
19
47
15
19
26 41 14
45
17 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
Replacement Parts and Service MMB Series
Contents and Part Numbers of Seal Kits for Seal Groups Ordering
Pistons and Glands All part numbers listed contain standard, Group 1 seals. To
(see key to part numbers opposite) order kits with other classes of seals, replace the last digit of the
part number shown with the number of the seal group required.
RG Kit – Standard Gland Cartridge and Seals Eg: RG04MMB0221, containing a Group 1 seal, becomes
Contains RK Kit, plus 14. RG04MMB0225 when it contains a Group 5 seal.
RGL Kit – Chevron Gland Cartridge and Seals Service Kit Order Codes – Piston and Body
Contains RKL Kit, plus 14a, 14b.
Bore CB Kit PN Kit PL Kit
RK Kit – Standard Gland Cartridge Seals Ø Body End Standard Piston Chevron Piston
mm Seals Seals Seals
Contains items 40, 41, 45, 134, 140a, 140b.
40 CB040MMB01 PN040MMB01 PL040MMB01
RKL Kit – Chevron Gland Cartridge Seals 50 CB050MMB01 PN050MMB01 PL050MMB01
Contains items 40, 45, 134, 137, 139a, 139b. 63 CB063MMB01 PN063MMB01 PL063MMB01
80 CB080MMB01 PN080MMB01 PL080MMB01
CB Kit – Cylinder Body End Seals and Back-up Washers
100 CB100MMB01 PN100MMB01 PL100MMB01
Contains items 26 and 47.
125 CB125MMB01 PN125MMB01 PL125MMB01
PN Kit – CB Kit plus seals for Standard Piston 160 CB160MMB01 PN160MMB01 PL160MMB01
Contains CB kit, plus 46, 125, 126, 127. 200 CB200MMB01 PN200MMB01 PL200MMB01
250 CB250MMB01 PN250MMB01 PL250MMB01
PL Kit – CB Kit plus seals for Chevron Piston
320 CB320MMB01 PN320MMB01 PL320MMB01
Contains CB kit, plus 55, 142, 143 and two of 46.
18 Parker Hannifin
Cylinder Division
Watford, Herts.
Catalogue HY07-1215/UK Roundline Cylinders
How To Order MMB Series
Key
Required for basic cylinder
Ports, Air Bleed and Cushion Adjusters
Standard port location is position 1. Cushion adjustment needle
Indicate optional features or leave blank
valves, where specified, are at position 2.
1 1
3 3
Cap End Head End
19 Parker Hannifin
Cylinder Division
Watford, Herts.
Hydraulics Group
Sales Offices
Europe International
Austria Italy Australia
Wiener Neustadt Corsico (MI) Castle Hill
Tel: +43 (0)2622 23501 Tel: +39 02 45 19 21 Tel: +61 (0)2-9634 7777
Fax: +43 (0)2622 66212 Fax: +39 02 4 47 93 40 Fax: +61 (0)2-9899 6184
Parker Hannifin is the world’s premier supplier of motion and control systems and
solutions, with sales and manufacturing facilities throughout the world.
For product information and details of your nearest Parker sales office, visit us at
www.parker.com or call free on 00800 2727 5374.
Catalogue HY07-1215/UK
02/06 PC
© Copyright 2006
Parker Hannifin Corporation
All rights reserved.