0 evaluări0% au considerat acest document util (0 voturi)
121 vizualizări4 pagini
This document provides instructions for creating a bootable Windows PE 5.1 USB drive that includes Ghost imaging software. It outlines downloading necessary files like the Windows ADK and Ghost software. The steps include mounting the Windows PE WIM file, adding the Ghost files and device drivers to the image, and modifying a startup file to launch Ghost automatically. The image is then committed to the USB drive, which is prepared and copied to in order to create a bootable Windows PE drive that can deploy Ghost for imaging computers.
This document provides instructions for creating a bootable Windows PE 5.1 USB drive that includes Ghost imaging software. It outlines downloading necessary files like the Windows ADK and Ghost software. The steps include mounting the Windows PE WIM file, adding the Ghost files and device drivers to the image, and modifying a startup file to launch Ghost automatically. The image is then committed to the USB drive, which is prepared and copied to in order to create a bootable Windows PE drive that can deploy Ghost for imaging computers.
This document provides instructions for creating a bootable Windows PE 5.1 USB drive that includes Ghost imaging software. It outlines downloading necessary files like the Windows ADK and Ghost software. The steps include mounting the Windows PE WIM file, adding the Ghost files and device drivers to the image, and modifying a startup file to launch Ghost automatically. The image is then committed to the USB drive, which is prepared and copied to in order to create a bootable Windows PE drive that can deploy Ghost for imaging computers.
2. 3 Ghost Files (version 11.51) GDISK64.exe GHCONFIG64.exe GHOST64.exe 3. WINDOWS ADK (Assessment and Deployment Kit) for 8.1 LINK: http://www.microsoft.com/en-ca/download/details.aspx?id=39982 4. WINDOWS NIC DRIVERS FOR MACHINES YOU WILL BLAST (WINDOWS 8.1 x64 BIT ONLY) 5. LAPTOP OR PC TO SETUP DEPLOYMENT TOOLS (WITH WIN 7/8/8.1 X64BIT OS) 6. INTERNET CONNECTION FOR INSTALL & DRIVERS ABOVE
SETUP PROCEDURE ON MACHINE YOU WILL USE (LAPTOP/PC):
1. DOWNLOAD WINDOWS ADK for 8.1 WITH LINK FROM ABOVE
2. RUN “adksetup” (internet required to install features) 3. INSTALL WITH DEFAULT LOCATION WHICH IS: 4. RUN INSTALLER THROUGH AND SELECT THE FOLLOWING TO INSTALL: a. DEPLOYMENT TOOLS b. WINDOWS PREINSTALLATION ENVIROMENT (WIN PE)
5. ONCE INSTALLED SELECT FINISH AND CLOSE THE INSTALLER
6. CREATE A DIRECTORY CALLED “C:\MOUNT” 7. RUN “DEPLOYMENT AND IMAGING TOOLS ENVIRONMENT” AS ADMINISTRATOR (USE SEARCH) 8. TYPE : copype amd64 C:\winpe_x64 (THIS WILL COPY OVER PE IMAGE)
9. CLOSE DEPLOYMENT WINDOW
10. CREATE A DIRECTORY CALLED “C:\winpe_x64\drivers” (THIS IS WHERE YOU PUT ALL YOUR WIN 8.1 X64BIT NIC DRIVERS) 11. DELETE THE MOUNT FOLDER IN “c:\winpe_x64” (DO NOT USE THIS AS IT IS FASTER TO USE C:\MOUNT” 12. COPY THE “winpe_ocs” FOLDER LOCATED IN “c:\program files (x86)\windows kits\8.1\assessment and deployment kit\windows preinstallation environment\amd64\” AND PASTE IT IN “C:\winpe_x64\” (OPTIONAL IF YOU NEED LANGUAGE PAKS FOR ADDITIONAL SUPPORT IN WIN PE)
SETUP THE WINPE IMAGE:
1. RUN DEPLOYMENT AND IMAGING TOOLS ENVIRONMENT AS ADMINISTRATOR (LEAVE OPEN AS
YOU DO THE NEXT STEPS) 2. TYPE “imagex /mountrw c:\winpe_x64\media\sources\boot.wim 1 c:\mount” (IN TERMINAL) 3. OPEN c:\mount DIRECTORY AND CREATE THE DIRECTORY “C:\MOUNT\GHOST\” 4. COPY THE GHOST FILES (LOCATED ON FTP) AND PASTE THE GHOST FOLDER (C:\MOUNT\GHOST\) 1. GDISK64.exe 2. GHCONFIG64.exe 3. GHOST64.exe 5. ADD ANY WINDOWS 8.1 DRIVERS IN THE DRIVERS FOLDER “c:\winpe_x64\drivers” 6. GO BACK TO THE TERMINAL AND TYPE “dism /add-driver /image:”c:\mount” /driver:C:\winpe_x64\drivers” /recurse (THIS WILL INJECT ALL THE DRIVERS FROM THAT FOLDER INTO YOUR IMAGE) 7. FIND THE STARTNET.CMD IN c:\mount\windows\system32\ AND EDIT THIS FILE 8. UNDER THE WPEINIT ADD A NEW LINE “@start x:\ghost\ghost64.exe” (THIS IS STARTUP GHOST WHEN PE BOOTS ON A MACHINE) 9. CLOSE ALL WINDOWS EXCEPT THE DEPLOYMENT TERMINAL 10. TYPE “dism /unmount-image /mountdir:”c:\mount” /commit (THIS WILL UNMOUNT AND SAVE THE IMAGE 11. CLOSE THE TERMINAL (ONCE UNMOUNTED)
SETUP A USB STICK FOR WINPE:
1. INSERT YOUR USB STICK
2. OPEN COMMAND PROMT 3. TYPE THE FOLLOWING COMMANDS: a. diskpart b. list disk c. select disk (no. corresponds to your usb stick) d. clean e. create partition primary f. select partition 1 g. active h. format fs=ntfs quick i. exit 4. SAFELY REMOVE YOUR USB STICK (ITS READY FOR FILES)
FINALLIZE BOOTABLE:
1. INSERT YOUR USB STICK
2. COPY THE CONTENTS FROM “c:\winpe_x64\media” AND PASTE ON YOUR USB STICK (NOTE- COPY ONLY THE CONTENTS OF MEDIA NOT THE FOLDER ITSELF!!) 3. DONE – TEST THIS STICK ON A MACHINE FOR MULTICAST AND GHOST
Special thanks to:
Andrew Walsh and the IT students Nov 2015 to March 2017 class