Sunteți pe pagina 1din 2

Mk6E

Smart Three Phase


Electronic Revenue Meter
Genius Series - Class 0.2S and Class 0.5S

PRODUCT INFORMATION

The Mk6E is an enhanced upgrade of the Mk6 meter,


built with a higher class accuracy of 0.2S, catering to
the high-end markets. The Mk6E is a high-precision
meter created for generation and transmission
applications, as well as for revenue metering at
high-end consumer facilities.

KEY FEATURES

AMI READY HIGH LARGE LARGE MEASURE UPGRADEABLE ANTI SCRIPT


ACCURACY DATA STORAGE LCD DISPLAY EVERYTHING TAMPER EXTENSIONS
Mk6E Genius Series - Class 0.2S and Class 0.5S

Smart Three Phase


Electronic Revenue Meter
SPECIFICATIONS

Measurement • Mains synchronised or internal Load Survey/Profile • Maximum demand control of loads
crystal (TCXO) time keeping. Mains via pulsing outputs
• Class 0.2S and Class 0.5S • NEM compliant
synchronised reverts to internal • Time of use history, etc
• IEC 62052-11, IEC 62053-22 (Class • Over 900 kilobytes of flash data
crystal (TCXO) on loss of all phase
storage space. Communications
0.2S and Class 0.5S), IEC 62053-23 volts
-3
 100 day-channel capacity at 30 • Up to 3 independently working
(Class 2) Data Storage minute intervals communications ports:
• 3 phase 3 wire • Configuration, TOU data and load -1
 875 day capacity at 30 minute
- Optical port: FLAG (IEC 62056-21)
• 3 phase 4 wire survey data intervals/2 channels
-5
 20 day capacity at 15 minute or ANSI Type 2 (ANSI C12.18)
Voltage - Flash Ram
intervals/3 channels - RS-232 (RTS/CTS and DTR/DCD)
• Nominal voltage: 57V - 240V - Battery backed up RAM
(phase to neutral) • Up to 50 channels - RS-485 multi-drop (4-wire with RJ45
LCD Display • Interval programmable from 1
• Burden: <10VA / phase @ Vn or screw terminal)
• 16 Characters by 2 lines second to 1 month
(3 phase), as per IEC 62053-61 • Option for SCADA card
alphanumeric display • Multiple independent surveys
• Option for internal modem power
Current • Programmable units, multipliers and • Energy, instantaneous readings,
supply
• CT range: leading zeros pulsing inputs, average/min/max
• PSTN, UDP/IP, GPRS/PPP capable
• Up to 64 user-defined screen readings
1/4A, 1/6A, 5/10A and 5/20A • Compatible with MV-90TM
displays
• Short time over-current: Time Of Use • Support EDMI command line,
• Displays any available meter
20 x Imax for 0.5 seconds • 8 rates plus unified rate MODBUS, DNP3 level 2,
parameter
• Burden: <0.5VA/phase • Up to 12 separate import and export IEC 870-5-102, DL/T 645-2007
Measured Values registers
Auxiliary Supply Options and DLMS protocol
• 3 elements, 4 quadrants • Up to 200 programmable special • Master/Slave arrangement with up
• 100 to 240 VAC
• Import/Export/Absolute Wh, varh days
to 31 ‘Slave” meters accessed
Frequency and VAh
• Daily, weekly, monthly, yearly and
through one ‘Master’ gateway meter
• 45Hz - 65Hz special days
• Phase A, B, C or Total
• 13 or more previous periods Software
Inputs/Outputs Configuration • W, var, VA
• Block or rolling maximum demand • EziView Windows® software
• Up to 10 I/O total, independent • True RMS voltage (3 phase)
• Time of maximum demand (optional), can be used for
common ground with 4kV isolation • True RMS current (3 phase) programming and reading
• Configurable billing rest button
• Passive input voltage: • Power factor the meter
5V, 12V, 24V, 48V, 110V, 240V • Frequency Extensions for Customer • EziView also allows offline
• BOSFET output: • Phasor angles Applications configuration of tariff programs
240V, 100mA maximum and all meter parameters, for
Quality of Supply Features Mk6E GENIUS plus®meter
• 2 Programmable LED indicators later upload to meters
continues the successful concept
• Total Harmonic Distortion (THD)
• Programmable output pulse width: of meter “Extensions” introduced Environmental
1ms to 250ms • Unbalance in the original Mk6 Genius® using
• Specified operating range:
• Programmable output polarity • Fundamental voltage, current and “EziScript”, complex register
watt measurement manipulations can be performed -25°C to +60°C
• Time synchronised (optional)
• Harmonics (up to the 50th) allowing sophisticated meter functions. • Storage range limit:
Battery • Sag/Swell New extensions are constantly under -25°C to +80°C
• Backup type: Optional lithium battery - 5 Cycle resolution development, contact us to find out the • Relative humidity:
1200mAh, 3.6V and SuperCap latest updates. Up to 95% non-condensing
-R
 ecords time/date/phase/duration/
(single/dual) Some examples of currently available
worst excursion
• Backup time: 2 years without power extensions are: Dimensions and Weight
- Programmable trigger levels
• Battery shelf life of 10 plus years at • Send SMS at percentage of • Dimensions: 260mm (L) x
• Waveform capture (voltage and
room temperature maximum demand, or equipment 173mm (W) x 93mm (D)
current only)
failure alarm • Weight: 2 kg (standard), 2.2 kg
Real-time Clock
• Accuracy: 0.5 seconds per day (over (with SCADA card)
full temperature range)

EDMI Limited
47 Yishun Industrial Park A, Singapore 768724
Tel: +65 6756 2938 | Fax: +65 6756 0125
Email: sgmarketing@edmi-meters.com | sgtechsupport@edmi-meters.com www.edmi-meters.com

Copyright © 2017 EDMI Limited. All Rights Reserved. All trademarks are the property of their respective holders. EDMI’s Policy is one of continuous product development and the right is reserved to modify specifications contained herein without notice.
MKT-BR-017 Rev 00

S-ar putea să vă placă și