Documente Academic
Documente Profesional
Documente Cultură
htm
By : Mohd Ali
Client Export:
1. Run SCC8
2. Select Profile for desired copy type (Usually All [SAP_ALL] or user master only [SAP_USER]. You will
need direction from the requester as to the correct selection here. Use Profile -> Display Profile to
display profile details.)
5. Run Export
3. "SIDKX00353" for transporting client-specific texts, provided texts are available in this client
3. Manually add "O" transport then "X" then "T" to TMS buffer
6. After Import is complete perform "post processing steps" from client tool (SCC7)
Client Import:
3. Run SCCL (Local copy ) or SCC9 (remote copy) and complete the form as required
- Select Profile for desired copy type (Usually All [SAP_ALL] or user master only [SAP_USER]. You will
need direction from the requester as to the correct selection here. Use Profile -> Display Profile to
display profile details.)
- Select RFC Destination to copy from for Remote copy, or Source client to copy from for Local copies
- Execute in background
5. After Import is complete perform "post processing steps" from menu in client tool (SCC7)
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
You need to perform postprocessing activities to adapt the runtime environment to the current state of
the data.
This is performed when you execute SCC7 after import of request generated with SCC8.
For Eg. what I have observed is SCC7 internally triggers programs so as to change logical system name
from Source name to target name. (Similar to function of BDLS transaction)
https://archive.sap.com/discussions/thread/1048261
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@