Documente Academic
Documente Profesional
Documente Cultură
HAL00000
raise and lower the tree in the derrick. Flanged 45° support subs
on the kill and flow wing sides of the central body enable flexible
flow lines to be easily connected to the Surface Test Tree.
An oil-filled swivel assembly below the central body of the Surface Features
Test Tree enables tubing to rotate freely, providing a means to The Surface Test Tree consists of the following main components:
manipulate the tool string while the test tree remains stationary. • Swab Valve: A 7 3/8-inch hydraulically operated gate valve
The Surface Test Tree can also be fitted with a lower master valve located at the top of the Surface Test Tree block, enabling an
installed immediately below the swivel assembly for complete entry point into the string when used with a blowout preventer
Surface Test Tree isolation. (BOP) and Lubricator. The swab Valve is a fail-as-is valve fitted
Benefits with a manual override and position indicator.
• Provides multiple pressure barriers at surface • Flow Valve: A 5 1/8-inch hydraulically operated fail-safe-
• The hydraulic fail-safe flow wing valve provides a means to closed (FSC) gate valve that can be controlled automatically by
have a controlled or automatic shut in of the well in the emergency shutdown pilots while flowing well effluents to the
event of a downstream failure or while operating in harsh well-test package.
environmental conditions • Kill Valve: A 5 1/8-inch hydraulically operated FSC gate valve
• High tensile-load capabilities and integrated swivel enable the utilized to kill the well or pump into the landing string. Fitted
work-string rotation/manipulation without rotating the Surface with a Check Valve to prevent well effluents from flowing back
Test Tree through the kill line to the pumps.
• Enables tools, coiled tubing, and/or wireline to be run into the • Master Valve: A 7 3/8-inch valve left in the open position
well through the swab valve during the flowing of the well, provides a barrier from the well
fluid when closed, and assists during the pressure testing of
the Surface Test Tree and use of a BOP and Lubricator during
remedial work being performed in the string.
• Swivel: Enables tubing rotation for manipulating downhole
equipment without turning the Surface Test Tree. The Swivel
also has lock pins that can be engaged to prevent it from
swiveling for transportation and rig up if desired.
TESTING AND SUBSEA
For more information about the 7 3/8-inch 10K Surface Test Tree, contact your local
Halliburton representative or email welltesting@halliburton.com
© 2014 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the
contract between Halliburton and the customer that is applicable to the sale. H010754 10/14
www.halliburton.com