Documente Academic
Documente Profesional
Documente Cultură
3-FORM-004-REV0
Be aware of surroundings, Keep all access route clear. Assess work area for tripping hazards and other
Slips, trips and falls
obstacles. General Housekeeping. Proper PPE i.e Safety Footwear and etc
Be aware of surroundings. Assess work area prior to moving of material and monitor area constantly for
Uneven surfaces
conditions changes. Protective footwear to worn at all times.
Use proper PPE (gloves). Competent personnel. Avoid placing body parts near pinch points, Proper
Pinch points
placement of hands and fingers
Improper Placement of Fingers
Regulate the length of exposure to hot environments. Provide cool drinking water and encourage workers to
Heat Stress
drink it frequently in small amounts before, during and after working. Ensure Water cooler is taped and dated
each day
Adverse weather conditions
Monitor all weather conditions prior to job start up. Suspend work during adverse weather conditions after
(Slippery Surfaces)
consultation with all persons associated with the job. All parties to adhere to this decision
Inspection of tools prior use and colour coded to MHI requirements. Use the correct tool for the job. Use tools
Fabrication of Sandwich Panels Use of tools
for what they were designed for. Competent personnel for job.
Use proper PPE (gloves). Competent personnel, Avoid placing body parts near pinch points
Pinch Points
Mechanical aid. Ensure proper communication among crew, Wear proper PPE (gloves), Competent
Improper Manual Handling
personnel, Proper lifting techniques.
SGL-HSSE-E1.3.3-FORM-004-REV0
Hot materials Ensure hands and body placement from hot materials. Use proper PPE for the job.
Flying Particles Ensure proper PPE is use when using chop saw (face shield, safety glasses, gloves, etc.) and barricade the
work area
Shock from broken cords Check all cords before use, make sure all equipment is certified and is the correct tool for the job
SIMOPS Proper communication among various work crews. Cordon off work area and place the appropriate warning
signs
Metal Dust Work area well ventilated. Respiratory protection provided and used when natural dilution ventilation isn't
adequate. Employees educated on the hazards associated with exposure to metal dust.
Slips, trips and falls Be aware of surroundings and keep clear of edges. Sufficient clear access around the perimeter of the work
area. Area around work area not cluttered with stored materials and/or rubbish.
Heat Stress Regulate the length of exposure to hot environments. Provide cool drinking water and encourage workers to
drink it frequently in small amounts before, during and after working. Coolers must be seal and dated.
Sharp edges Use of proper work man’s glove and long sleeve clothing required for job task competent person
SGL-HSSE-E1.3.3-FORM-004-REV0
Pinch Points Use the correct tool for the job. Use tools for what they were designed for. Competent personnel for job.
Improper Manual Handling Use proper PPE (gloves). Competent personnel, Avoid placing body parts near pinch points
Mechanical aid. Ensure proper communication among crew, Wear proper PPE (gloves), Competent
personnel, Proper lifting techniques
Incompetent personnel Ensure that works are fully aware of the task they are to perform.
Shock from broken cords Check all cords before use, make sure all equipment is certified and is the correct tool for the job
SIMOPS Proper communication among various work crews. Cordon off work area and place the appropriate warning
signs
Metal Dust Work area well ventilated. Respiratory protection provided and used when natural dilution ventilation isn't
adequate. Employees educated on the hazards associated with exposure to metal dust.
Slips, trips and falls Be aware of surroundings and keep clear of edges. Sufficient clear access around the perimeter of the work
area. Area around work area not cluttered with stored materials and/or rubbish.
Heat Stress Regulate the length of exposure to hot environments. Provide cool drinking water and encourage workers to
drink it frequently in small amounts before, during and after working. Coolers must be seal and dated.
Sharp edges Use of proper work man’s glove and long sleeve clothing required for job task competent person
SGL-HSSE-E1.3.3-FORM-004-REV0
Entanglement with moving Check all cords before use, make sure all equipment are certified and are the correct tool for the job
parts of machinery
Misuse of tools Ensure equipment is de-energized before conducting repairs on it. Use of gloves and other appropriate PPE,
competent person for job and no loose clothing. Use the correct tool for the job, Use tools for what they were
design for.
Incompetent personnel Ensure that works are fully aware of the task they are to perform.
Flying Particles Workers are required to wear proper eye protection i.e. Safety Glasses and Face shields at all times when
performing grinding activities.
Clean-up and demobilization from site area Uneven surfaces Be aware of surroundings. Assess work area prior to moving of material and monitor area constantly for
conditions changes. Protective footwear to worn at all times.
Improper Manual Handling Ensure proper communication among crew. Competent personnel. Proper lifting techniques. Wear proper
PPE (gloves).
Slips, trips and falls Be aware of surroundings, Keep all access route clear. Assess work area for tripping hazards and other
obstacles. General Housekeeping.
Pinch points Use proper PPE (gloves). Competent personnel. Avoid placing body parts near pinch points.