Sunteți pe pagina 1din 1

GS112

CABLE REEL

A COST EFFECTIVE AND DURABLE CABLE REEL ABLE TO MEASURE CRANES WITH A
MAXIMUM BOOM EXTENSION OF 140 ft (42.67 m)

The GS112 Cable Reel is Every part of the GS112 Cable costs by eliminating another
designed for two styles of Reel is designed for maximum cable or connection that requires
boom: proportional hydraulic durability. The length is recorded troubleshooting.
crane booms (when you pull by 2 magnetic switches driven by Users have the ability to quickly
on telescoping lever, boom a series of magnets sealed in the setup and adjust the boom angle
sections telescope equally) and reel drum. This measuring method from the LSI display, eliminating
non-proportional booms with a is contact free, so none of the the need to manually adjust the
maximum boom extension of 140 wear common with a traditional boom angle physically on the
feet (42.67 meters). potentiometer will occur. cable reel.
The stainless steel cable can The measurement device is The GS112 Cable Reel can be left
terminate at the end of the optimized for crane movement. or right hand cab mounted. The
first telescoping section on a Perfect if you are looking for angle sensor will automatically
proportional boom, eliminating the accuracy, the angle and length adjust its orientation for the side of
need to run the cable all the way to sensors are read 4 times per the boom that it is installed on.
the boom tip and reducing cable second, with this data being
breakage. transmitted to the display. Angle The transmitter box is powered as
sensor accuracy is .2 degrees. standard by one “D” cell lithium
Unlike some of our competitors, battery with a typical life span of
the LSI Anti-Two-Block System is A wireless transmitter box 1-2 years. Users can also use a “D”
wireless. This allows for a stronger mounted on the front face of cell alkaline battery if required.
cable reel cable by eliminating the cable reel transmits the
the need to move the A2B signal boom length and boom angle The GS112 Cable Reel is
through it. A stronger cable helps simultaneously back to the LSI temperature compensated and
to prevent cable breakage when display. This eliminates the cable designed to operate within a range
working in proximity to trees and that typically runs between the of -22ºF to 150ºF (-30ºC to 65ºC).
other hazards. cable reel and the display, and
saves installation time. In the long
run, the GS112 reduces support

Give us a call or send us an email: +1.281.664.1330 | sales@loadsystems.com

S-ar putea să vă placă și