Documente Academic
Documente Profesional
Documente Cultură
SUGGESTED SPECIFICATION
Storage tank shall be A. O. SMITH glasslined storage tank. Tank shall be ________ “ x ________ “ and have a nominal capacity of _________ gallons. Tank(s)
shall have threaded openings as shown on drawings. Interior of tank(s) shall be glasslined with an alkaline borosilicate composition which has been fused to the
steel by firing at a temperature of 1600°F. Glass coating shall be continuous over the entire inner surface of the tank. Outer jacket shall have a baked enamel
finish. Meets minimum thermal insulation requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1. Cathodic protection shall
be provided. Tank shall have a working pressure of _________ psi. Tank shall have a five year limited warranty as outlined in the written warranty.
Page 1 of 2
Revised November 2013 AOSTT35100
2" NPT
2" NPT 2" NPT FRONT & REAR
2" NPT FRONT & REAR FRONT & REAR
FRONT & REAR
ASME PLATE
ASME PLATE UNDER COVER
UNDER COVER
3/4" NPT
3/4" NPT REAR
54 7/8" 3/4" NPT
REAR
54 7/8" 3/4" NPT REAR 63"
42 3/4"
TJV-120M
42 3/4" REAR 63"
51 7/8" TJV-120A 3/4" NPT
51 7/8" 47" 3/4" NPT FRONT
32 1/4" 3/4" NPT 47"
32 1/4" 3/4" NPT
2" NPT
FRONT 2" NPT FRONT
19 1/2" FRONT 2" NPT
3/4" NPT 1-1/4" NPT FRONT & REAR
19 1/2" 11" 9 3/4" (ANODE) 1" NPT 2" NPT
2" NPT 16" (ANODE)
FRONT & REAR
11" 9 3/4" FRONT & REAR
2" NPT 16" 7"
FRONT & REAR
2" ASME INSPECTION 7"
3/4" NPT OPENING (PLUGGED)
2" ASME INSPECTION
REAR
3/4" NPT OPENING (PLUGGED) 3 3/4" 3/4" NPT
REAR REAR
3 3/4" 3/4" NPT
29 3/8" REAR
28"
1" NPT
TJV-120M FRONT TJV-120A TJV-120A
TJV-120M
2" NPT 1" NPT
2" NPT FRONT 2" NPT 2" ASME INSPECTION
2" NPT 2" NPT
OPENING (PLUGGED)
3/4" NPT 1-1/4" NPT
(ANODE) 1" NPT
3/4" NPT ASME PLATE 1-1/4" NPT
(ANODE) (ANODE)
1" NPT
LOCATED UNDER (ANODE)
62"
COVER
CLEANOUT
TJV-200M 44 1/2" & REAR
CLEANOUT
15"
11" 15" 21 1/4"
11" 3/4" NPT 213/4"
1/4"
4 1/8" (ANODES) 17
4 1/8" 17 3/4"
9 3/4" 10 3/4"
2" NPT 9 3/4" 10 3/4"
FRONT & REAR 2" NPT
3 1/2" FRONT & REAR
3 1/2" 2" ASME INSPECTION
OPENING (PLUGGED) 2" ASME INSPECTION
3/4" NPT
OPENING (PLUGGED)
FRONT 3/4" NPT
FRONT
2" ASME INSPECTION 2" NPT
OPENING (PLUGGED)
32 "
TJV-200M TJV-200M
1" NPT
3/4" NPT
(ANODES) 3/4" NPT
(ANODES)
3/4" NPT
3/4" NPT
3/4" NPT
For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith
77 " 2" NPT Corporation reserves the right to make product changes or improvements without prior notice.
77 " 2" NPT
64"
ASME
64"RATING PLATE AND ASME RATING PLATE AND
Revised November 2013 HAND HOLE LOCATED
HAND HOLE LOCATED Page 2 of 2
UNDER COVER
www.hotwater.com UNDER COVER
AOSTT35100
17 1/4" 17 1/4"
17 1/4" 17 1/4"
12 1/4" 12 1/4"
12 1/4" 12 1/4"
AOSTT35100 R Nov 2013 Storage Tank Spec.indd 2 11/18/13 1:43 PM