Documente Academic
Documente Profesional
Documente Cultură
found the right code. If your 0. This is the first digit of the 3. Press the device mode keyyou ADDITIflNAI I1{FflRMAÏIflI{
@ 2-3 using the next code listed for device makes it easier to control volume, the same device code as the key you No part of this publication may be
oress one ofthe device mode kevs (TV mode) need to enter 3 digits.
your brand), or search for a device without having to guess whether the selected in Step l. Ifyour second device reproduced, transmitted, transcribed,
huolo, nvorucn, cABtE) at the iopof For example, to access
(@@ code. See "Searching for Codes". volume will change. If you lock the uses a different code, you may program stored in any retrieval system, or
your remote. After you set up the remote Note: Favorite
channel 2, press 0-0-2.
remote's volume controls to the TV (for it for the new code. See "Programming translated to any language, in any form,
@o@ to control that device, you may begin channels must be pre- For channel 22, press Device Controll'. or by any means, electronic,
o@@ using the device. selected through the
example), youwill always be able to
0-2-2. SEARGHII{G FflR C(lt¡ES change the volume to the level you want, mechanical, optical, manual, or
0@@@ See "Programming Device Control" for Electronic l{ote: You may not reassign the Cable
otherwise, without the prior written
Programming Guide
lnput Select the video source
Ifnone ofthe codes listed under "Device
without having to adjust it on multiple device key to another type ofdevice.
more information on identifying a devices. permission of Motorola.
specific device to a device key. before dris key works. Aspect Changetheviewing Codes"on the back ofthis guide match
vour device, you can search for a set of 1. Press and hold the device mode Assigning a Key back t0 lts 0riginal MOTOROLA and the styiized M logo are
aspect (ifavailable)
Display the heþ screen resistered trademarks in the US Patent
Press this commands that will work. Your remote key (TV, AUDl0, DVD/VCR, or Cable)
^o o o tr o device 0N or OFF
@ channel PIP SWAP Swap the PIP
the main display
signalto
(if
1. Press a device mode key
andhold
(AUDl0, DV0/VCR, orï\l) for at least
device key lights up, then the key
for the device you selected remains
iype (for example, AUDI0) for at
lèãst six seconds. The LED for each
Audio,DVI!/VCR, Selectadevice Vflt +/- Increase or decrease on.
available) six seconds. The LED for each device key lights up, then the key Ml072BA1 05i05
o o o TV Cabls volume
PlPMove Movethepositionof device key lights up, then the key Press Volume +. for the device you selected remains
o o o (' voD J
' Direct access to Video CH +/- Select the next or the PIP display
for the device you selected remains The device key's LED blinks three times, on.
o o onDemand(VoD), previous channel
PIP CH +/- Select the next or
on. indicatins it tias locked the volume 2. Enter 3 I 2. The mode keyt LED
rroToRoLA
where available
previous channel inthe
2. Press afunction key (such as control to"the device vou selected. The blinks three times and turns off intølhgênce everywherc
.@.
Display clrannel and
program information
Each ofthe additional device keys
controls a particular type ofdevice. For
a
.
CH+
stop
l. Press and hold a device mode key
(TU AUD|0, DVD^|CR, or Cable) IRflUBTESHflflÏINû
Your new Motorola DRC800 universal 4- tFW0 Fast Forward VCR, example, the DVD/VCR key controls your corrcsponding to thc dcvice
Ifyou have trouble with your remote, try
in-1 remote operates your Motorola or The device key's LED blinks three
other manufacturer's cable set-top box -Fl
\-J
DVDVoD,DVR,oT Access the cablc guicle VCR, DVR, or DVD playea but notyour
times, then turns off.
currently locked to the volume
the following steps in order.
irnrl up to lhrcc othcr dcvices.
REC0RD
HTIB
RecordtoVCRorDVR
@ TV, unless you specify otherwise. See
"Reassigning Device Keys". Press A.'l'he rcrnote will scnd the
controls for at least six seconds.
The LED for each device keylights
l¡r irtltlilir¡¡r, thc l)lì,(ltl(X) provides up, then the key for the device you My remote is not responding
lR cornrnand ltrr the function you
@ Access any OSD for the
device .
rrrlvrurtrrl lcrrtt¡rcs such iìs l)igital Video
l,l.t'toltling (l)Vlì.) corrtrol and Picture-
PAUSE PaUseVCR,DVDVOD
@ currently selected
device
This
key...
Controls this type of
device..-
pressed in Step 2.
Ifthe device pertbrmed the 2.
selected remains on.
Press Volume -.
Review the information in "Using
Your Remote"to make sure that the
in-Picturc ( PIP) support. key you pressed is active for the
orDVR Move up through any TV TV function you prcssetl, press 0l(.
of @ The device key's LED blinks three times, device you are controlling.
You can lock volume control to any
thcsc dcvices, to make adjusting your ST0P SIopVCR,DVD,VOD
^ OSD or cablc
menu
guidc
DVD/VCR DVù VCR, DVR,
The remote will now control the
device you selected in Step 1.
indicating it has unlocked the volume . Make sure you are controlling the
HTIB, TV/VCR, control for all devices.
honlc enteltainment volume easier. See orDVR device you think you are. See
"0hanging Volume Lock'. The DRC800 @ V Move down through TV/VCVDVD Ifthe device did not perform the "Using Your Remotd'for more
function you prcssccl, rcpeat step
conrcs from the factory without the
volume locked to any specific device. @ Repþ the previous
few seconds ofa
any OSD or cable guide
menu
Cable
andTV/DVD
Cableboxonly
3. Press
code.
V to retry the previous
REASSIGNII{G DEVICE KEYS information on choosing a device
to control.
TV:
system). This makes it easier to search
for a code ifvour device's code does not
power for retaining your settings.
See "Installing Batteries"for more
Your remote controls devices from up to recorded. Thiswill menu the back ofthis guide. upp.u. on tlt. litt provided.
AUDIf): information on changing the
50 ft (15 m) away if you are directly in allow you to select one
') Press and hold a device key Your new remote allows you to change batteries.
front ofthe device, or from up to 20 ft (6 for viewing (only Select the currentþ See "Checking Codes"for more
(AUDl0, DVII/VCR, orTV) for at least the type ofdevice that may be assigned .
rn) away ifyou are offto either side. available with DVR
models) @ highlighted oSD menu
or cable guide choice six seconds. The LEDs for each
device key light up, then the LED
information on noting code sets.
to a device key. That wa¡ ifyou have two
TVs, for example, you can control them
Reset all settings:
. Pressandholdadevicemode
kev (TV AUDI0, DVO/VCR, or
INSTATTING BATTERIES
@ Displays live television
programming (onÌy O*'@ View the previous or
next day's cable guide
for the device you selected remains
on.
CHECKING CflDES both by changing the type ofdevice the
DVD/VCR or AUDI0 key controls. Cable) or at least six seconds.
Your remote requires 2 AAA batteries. available with DVR l. Press and hold a device mode key
1. The LED for each device key
'l'he fìrst set ofbatteries is included, and
should last up to 6 months under
models) A These functions are set
by your cable provider
Enter the four-digit code. The
device key LED turns offbriefly
after each key press.
(AUDI0, IIVD/VCR, orI\l) for at least
six seconds. The LEDs for each
Press andhold the device mode
key (TV, AUDl0, DVD/llGR, or Cable)
corresponding to the type ofdevice
lights up, then the keyfor the
device you selected remains
nurmal usage. Mute current audio device key light up, then the key for on'
L Removethebatterycasecoverand
feed
tr These functions are set
by pur cable provider l{ote: You have 10 seconds to press each
digit. Ifit
takes longer than that,
the device you selected remains
0n.
you want the reassigned key to
control (for example, TV) for at ' Enter9 I 1.
the old batteries (ifnecessary). least six seconds. The LED for each The LED blinks twice to indicate
2. Followthe diagram inside the
battery case to insert the new
o These functions are set
by your cable provider
the remote "times out' and you
must begin again.
2. Enter I I 0 to tell the remote you
are verifuing the device code. The
device key lights up, then the key
for the device you selected remains
that vour remote is returned to its
facto'ry settings. You will need to
batteries. 4. Ifthe remote recognizes the code, LED blinks twice. on. reset all device code settings. See
the device key's LED blinks three Press 1, then count the LED blinks 2. Enter992. "Programming Device Control".
l{ote: Always use neq high quality times. You can now test the remote and write down the number. If the
rcplacement batteries. Ensure that the by pressing P0ÌYER. If your device LED does not blink, the number is
batteries are not damaged before resþonds (turns off), you have
inserting them into the remote.
Media Center PC 0035, 0060, 0000, 0047, 0240, 07t7,0839
DEVICE CflDES TVs 0042,0048, 0081
0156, 0060, 0845, 1 704, 0650, ReplayTv 0614.0616
Ädmiral
0832, 1265,0154 white Westinghouse Sonic Blue 0614,0616
0047, 0479, 0000, 0037,
0761,0842,0783,0815,0817
Audio Amplifiers 0048, 0035, 0240, 0039, 0l 62, xR-1000 Sony Onkyo 1924,0503
0209,1237
Bo6c 0674 VectoÍ Resea¡ch 0039. 0479, 0000, 0033, 0209, Stack 9
0043,0240 t479
0154. 0047, 0054, 015ó, 0178 Systemu 0490, 1990,1907, t362
0702,û30,0672 MGN Technology ZT Group t972
Curtis Malh€s Tâgar Estems Philco
Mag¡arcx 0054, 0030, 01 79, 070ó
Harman/Kardon r7s6,0864,0885
0042 Broksonic 0479,1479
Touch 1972 0571,1902.0525
r755
Amprc
Megapower
0054, 01 78, 0030, 0056, 0t79 0043,0067,0807
Curtìs Mâthes
t278
ffi
Polk.{udio
Megâtron 0145.0178
Westinghouse ZT Group
0t79, 0463, 0178, 0150, 0154
¡.pq Digital 0765,0879,0748 0479, t278, t479
Magnavox
0150,0030,0178
wïitewestinghouse 0623,0463
0092, 0180, 0451, 0623
Mdanu 0269,0321,0892
0017,0047,0051 DVD/VCR Combination Devices Qwestar
0240,0807, 1035, l0ó0
N"k"rti.tú 03rl 150, 1 250, 78, 0093, 0836,
00 17, 0178, 0092, 0463
Ällegrc 08ó9
0522, 057 t, 0E22, I t93, 197 4,
Bell & Horcll
0 01
Niveus Media 07 11 .07fi. |32
0868 Âp*D8ital
BenQ Hârley Davidso¡
0ptimus Monivision 0700,0843 VCRs
Northgâte
ABS t972
Philips 0269,0892 00ó0,0030,0056
olynpus Lloyd's 0000 Sampo
0t62, l03s
Optimus 0250, 0l 66, 0154, 0650 Bell & Hwell 0104 Philips 0081,0739,0035,0618 So¡y t43t,t934,mz¡
0013,0078,02u Oploma ffi Peney 0240,1035, t237
Sylvania Superscan
Audio AmpÆuners
P.re 0807. 1035 Syrnphonir
Aspire Digital I 168 0545, 0490,05,19
ÂDC 053r
Dmont 0017 0717,07û 0000, 0 l 04, 0047, 0048, 0037, 0869,0591,0503
0121,0158,0189
ffi 0035 0845, ll45
Blaupunkt
07n,0774 l(cplflyl'V 0ót4,06t6 0479,0000, t479
1074,1û9 Dy¡atæh Iìhre Pårâde TV/DVD Combination Devices
Eleambod oooo 0466.01711
Advent
TV/VCUDVD Combination Devices 1016
005t,0250,0650
Electrophonic
Sâmsunß 1014,0045,0240 Controlled by the VCR lby Àpex Digital
1393
0154, 015ó, 0{x7, 0054, 00s6,
0171,0178,0179
ffi 0000,0035,0043, 00Er
DVR Devices
Go Video 1075, 0744, 0833, 0869,
1158, t730
1 099,
ryc
0030,0178
0135,0842 Sharp 0093, 0491, 0851, 0688, 0689 s)amphoni.
Grunpy 0179,0180 HI.Q ^BS
0ptimus 1023,0531, 1074,0670 Shenß Chiâ 0664,0573 1980,065r
0042, 0000, 00E9 CyberPower
Sory 0000,0834 Tagar Systems Liquid Video
0178 Howardcomputas 1972
Philips 0189, 1189,1269 Soundesign 0178,0179,0180 1348 Mâgnâvox
Harþ Davidson 0739
0014,0150, 0531,0630, 1023 Squareview 0t7l 0nkyo
HarmarlKa¡do¡ HughesNetworksystems 0739,0042
0I80 0000,0035, 0037 fntegra
0180
Htrlett Packdd 1990, 1907
Hâve¡my
Studio Expedence 0739, 06 18, 0636, 1503
Howrdc¡mputers 1972 0623,0558,08ó7, t90t
Qu¡sår
ßI'YPOWER
1254, t609,0531, t074, t023 Supfism TMK O24O Kawsaki 0790 Phiìips l9t 4
Hello Kitty 0451 ryc HughesNeMorksystem 0739
Suprcm€ Ib"@ K.""""d 0534,0410
Tatüg
Lloyd's Mediecente¡Pc lgn u58, 10s8 so¡ic Blue
I¡ñmtt video Concepts ffi Sony 1903, t904. t934,2020
Inteq Magnasonic
Techûol Ac€ videonagic Mâgnarcx 0821, 1914, 1 97ó, 0503, 0539,
0309,0039,
IBt Magnavq 003s, 0081, 0000, 0039, 1781
Videosonic 0240 Niveus Media 0675
1r89
Mâg¡in
0054, 0 179, 0l 80, 0092, 0056, Vt""*nt. lr?, No¡thgate 0539
0761,0815,0817 0060.0150 0081,0035
0014,0158,0189
Philips
1276, [76
Matsushih