Documente Academic
Documente Profesional
Documente Cultură
Application
The T8400 Blackout Limiter enables fast active, indicating that a blackout occurred. By adding a second unit with time
clearing of a blackout. It is possible to All generators are now checked and the delays 3 – 3.5 – 4 – 4.5 sec. 8 generators
monitor up to 4 generators with 1 unit first generator to have more than 90% can be handled.
and max. 8 generators with 2 units. voltage will close the contact to the When one of the generators has been
generator breaker. See function switched on, the blackout signal of 24V
If a blackout occurs, the first generator diagram in fig. 4. DC should be switched off.
to have more than 90% voltage will
close the generator breaker. If generator 1 is the first generator to The operation is illustrated in the
have more than 90%, this will happen connection diagram in fig. 2. Here a
after 1 sec. If generator 2 is the first normally closed contact is connected to
Function generator on voltage it will happen each of the circuit breakers:
When a 24V DC signal is supplied over after 1.5 sec. If generator 3 is the first Shore, G/B1, G/B2, G/B3 and G/B4.
terminals 15 and 16, the T8400 becomes one, it will happen after 2 sec. etc.…
If all circuit breakers are open the
GEN. 3 CLOSE GEN. 4 CLOSE NEXT contacts will all be closed and the T8400
VOLT G/B. 3 VOLT G/B. 4 T8400
is activated via the 24V DC signal.
In this example a standby generator is
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 BLACKOUT
START also started up (for example via the
M2000 Engine Controller) in the event
+ - of a blackout.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
STANDBY
- As soon as one of the generator
24V DC
GEN. 1 CLOSE GEN. 2 CLOSE + breakers is closed, the corresponding
VOLT G/B. 1 VOLT G/B. 2 BLACKOUT shore G/B 1 G/B 2 G/B 3 G/B 4
SIGNAL contact will open, and the T8400 is no
Fig. 1. Connection Diagram.
longer in operation.
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 BLACKOUT
START
+ - + -
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
STANDBY
24V DC
+
BLACKOUT shore G/B 1 G/B 2 G/B 3 G/B 4 G/B 5 G/B 6 G/B 7 G/B 8
SIGNAL
2 x ø 4,5 mm.
EMC CE according to EN50081-1, EN50082-1, EN50081-2,
EN50082-2
10