Documente Academic
Documente Profesional
Documente Cultură
PRODUCT INFO
Description
Topaz Partfill is a high flow valve intended for use in rain water harvesting tanks. The purpose of the float valve is to
automatically maintain a low level of water in the tank during periods of no or low rainfall. This allows services fed by the tank
to continue while leaving capacity in the tank for refilling by the next rain.
200 L / MIN
• As the tank empties the weighted float
travels down the cord and sits on the
Flow Graph bottom stop to activate the valve.
Gallons/Minute
Features
• Ideal for use with all
makes and models of rain
water harvesting tanks
• Compact
• Constructed from non
corroding materials Typical Installaton
• Valve can be locked in off
position using the lock off Topaz Partfill Operating Zone Rain Water Filling Zone
switch Rainwater Inlet Rainwater Inlet
• Up to 150mm differential
obtainable (dependant on Mains or pump
pressure) supplied water
• Detach Valve Seal inlet Air Break
Access System for quick
access to valve seal
(Patented)
Cord
Weighted Float able
Available Inlet Sizes to float freely up and
15mm (1/2”) down cord
20mm (3/4”) Weighted Float
25mm (1”)
32mm (1 ¼”)
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobevalves.com 2.17
TOPAZ PARTFILL
DIMENSIONS & MATERIALS
8 15/16”
227mm
200 L / MIN
A
See “Tail Dimensions”
208mm
8 3/16”
35mm
1 ⅜”
3 17/32”
90mm
Tail Dimensions
20mm
3/4”
Dimension A mm inches
15mm (1/2”) Long Tail 100 3 15/16
20mm (3/4”) Long Tail 46 1 13/16
25mm (1” ) Long Tail 62 2 7/16
32mm (1 1/4”) Long Tail 67 2 21/32
Seal Urethane
2.18 © Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobevalves.com
TOPAZ PARTFILL
PARTS IDENTIFICATION SHEET
CODE DESCRIPTION
3 1 TPPP1 Float, Arm & Stop Assembly
2 2 TPPP2 Cap & Actuator Assembly
3 TPP3 Diaphragm Assembly
4 Detach Base Assembly
4
1
200 L / MIN
CODE: TPVP
8
9
DESCRIPTION
3 4 CODE
1 DTP1 Detach Base
2 BSP Tails
Short Tail Assembly (BSP)
DTP020 Detach Tail 20mm(3/4”) Short
DTP025 Detach Tail 25mm(1”) Short
DTP032 Detach Tail 32mm(1 1/4”) Short
Long Tail Assembly (BSP)
DTP015L Detach Tail 15mm (1/2”) Long
2
DTP020L Detach Tail 20mm (3/4”) Long
DTP025L Detach Tail 25mm (1” bsp) Long
1 DTP032L Detach Tail 32mm (1 1/4” bsp) Long
NPT Tails
Short Tail Assembly (NPT)
1 DTP0075 Detach Tail 3/4” npt
2 DTP0100 Detach Tail 1” npt
DTP0125 Detach Tail 1 1/4” npt
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobevalves.com 2.19