Documente Academic
Documente Profesional
Documente Cultură
Bolt M6×25 10
14 Oil pump assembly
Bolt M6×35 10
15 Water pump Bolt M6×35 12
Bolt M6×12 10
16 Oil collector
Bolt M6 10
Bolt M6×30 12
17 Oil pan Bolt M8×35 25
Bolt M6×50 12
Oil filter 12
18 Oil filter
Corrugated pipe 74
19 Dipstick tube welded assembly Bolt M6×12 10
20 Water outlet pipe part Bolt M6×12 10
Bolt M8×35 25
21 Intake manifold
Nut M8 25
22 Oil rail Bolt M6×12 10
Cross recessed pan head
23 Air intake temperature/pressure sensor 5
screw
Bolt M6×30 12
24 Intake valve assembly
Bolt M6×35 12
25 Accelerator cable bracket Bolt M6×12 12
Bolt M10×1.25×20 44
26 Exhaust manifold
Nut M10 44
27 Exhaust manifold heat shield Bolt M6×12 10
Bolt M8×16 25
28 Exhaust manifold bracket
Nut M8 25
If you find any incorrect information, or you request more details or demonstrations, please send email to
bydautoservice@byd.com to obtain support.
Page 8, Total pages 119
If you find any incorrect information, or you request more details or demonstrations, please send email to
bydautoservice@byd.com to obtain support.
Page 14, Total pages 119
Installation Procedure
Notice: keep the silent timing chain away from any magnetic field.
1. Set the crankshaft to the TDC position. Align the TDC mark on the crankshaft sprocket with the
arrow on the oil pump.
TDC mark
Arrow
2.
upper edge.
DTC groove
UP mark
3. Install the silent timing chain to the crankshaft sprocket, with the color mark aligned with the
TDC mark on the crankshaft sprocket.
DTC mark
Color mark
If you find any incorrect information, or you request more details or demonstrations, please send email to
bydautoservice@byd.com to obtain support.
Page 15, Total pages 119
4. Install the silent timing chain to the camshaft sprocket, with the arrow aligned with the color
marks.
3 color marks
Arrow
5. As for 473QA engine, when installing the silent timing chain to the camshaft sprocket, the arrow
shall point to the center of the color marks.
2 color marks
Arrow
6. Apply engine oil to the threads of the tensioner pivot bolt, and then install the tensioner
assembly and guide assembly.
Tensioner assembly
Tensioner
pivot bolt
Guide assembly
If you find any incorrect information, or you request more details or demonstrations, please send email to
bydautoservice@byd.com to obtain support.
Page 16, Total pages 119
Tensioner support
9. Rotate the tensioner support clockwise to press tight the tensioner assembly, and then install
the other bolts to fix it.
10. Check whether the crankshaft front oil seal on the timing cover is damaged. Replace the
crankshaft front oil seal if it is damaged.
11. Clear away the old sealant on the timing cover matching surface, bolt and bolt hole.
12. Clean the timing cover matching surface and dry it.
13. Evenly apply sealant to the matching surface between the timing cover and cylinder block and
on the female threads in the bolt holes.
If you find any incorrect information, or you request more details or demonstrations, please send email to
bydautoservice@byd.com to obtain support.