Documente Academic
Documente Profesional
Documente Cultură
Faculty of Engineering
Answer:
Beam AB = 100 kN
Beam CD = 160 kN
Beam EF = 60 kN
Figure Q1
Answer:
Beam AB = 50 kN
Beam BD = 50 kN
Beam EF = 60 kN
Beam GH = 100 kN
Beam CD = 160 kN
Figure Q2
Answer:
VEd = 63.75 kN
MEd = 79.7 kNm Figure Q3
a) Calculate the design loads on beams B1, B2, B3, and B4, and the end of the
reactions.
b) Calculate the design loads applied to columns C1, C2, C3, and C4.
Figure Q4
Lecture slides prepared by Dr. Ahmad Nurfaidhi Rizalman
EXAMPLES AND TUTORIALS
Question 5
Figure Q5 shows a floor plan with two-
way spanning at the slabs. Calculate the
total load carrying by Beam AB, AC, BD,
CE, DF and EF. Ignore self-weight of the
beam.
Answer:
Beam AB = 68.75 kN
Beam AC = 31.25 kN
Beam BD = 31.25 kN
Beam CE = 11.25 kN
Beam DF = 11.25 kN
Beam EF = 48.75 kN
Figure Q1
Answer:
Each answer should be presented in a diagram. The
answer is described as follows:
• Beam CE, DF, GH and IJ are carrying UDL of 15 kN.
• Beam EF carrying point load 7.5 kN at 2.0 m and 6.0
m from E, and UDL load 30 kN from H to J.
• Beam CD is carrying end reactions from beams GH
and IJ with 7.5 kN, UDL load of 30 kN at GI, and
trapezoidal load of 68.75 kN at AB.
Figure Q6
Answer:
a) P1 = 411.4 kN, P2 = 57.1 kN, P3 = 42.8 kN, P4 = 57.1 kN, P5 = 411.4 kN, P6 =
430.2 kN, d1 = 5.658 m, d2 = 2.50 m, d3 = 3.0 m, d4 = 2.50 m, d5 = 5.658 m.
b) Vmax = 705 kN, Mmax = 4636 kNm.
Figure Q7a
Lecture slides prepared by Dr. Ahmad Nurfaidhi Rizalman
EXAMPLES AND TUTORIALS
Question 7
Figure Q7b
Lecture slides prepared by Dr. Ahmad Nurfaidhi Rizalman