Documente Academic
Documente Profesional
Documente Cultură
Evaporative Cooler
• Single Phase, ODP
• 1/3 – 1 HP
• 1725 RPM
• 56 Frame
Nidec Motor Corporation, © 2013; All Rights Reserved.
• Single and two speed U.S. MOTORS® is a registered trademark of Nidec Motor Corporation.
• Corrosion resistant rotor core and actuator assembly Nidec Motor Corporation trademarks followed by the ® symbol are 8050 W. Florissant Avenue | St. Louis, MO 63136
registered with the U.S. Patent and Trademark Office.
Phone: 888-637-7333 | Fax: 866- 422-7758
†All marks shown within this document are properties of their respective owners.
FLB / 2013 Rev. 12/13 www.nidec-motor.com | www.usmotors.com
www.nidec-motor.com | www.usmotors.com
General Purpose Industrial Motors Definite Purpose Motors Special Purpose Motors
Three Phase, TEFC, HOSTILE DUTY™ Three Phase, ODP Vector Duty Farm Duty Vertical Pump Motors Painted Washdown
• 1 – 350 HP • 1/4 – 400 HP • Three Phase, TENV and TEBC • Single and Three Phase, TEFC • Three Phase, WPI, WPII, TEFC and • Single and Three Phase, TEFC
• 3600, 1800, 1200 and 900 RPM • 3600, 1800, 1200 and 900 RPM • 1 – 15 HP (TENV) • 1/8 – 10 HP Hazardous Location • 1/2 – 10 HP
• 143 – 449 Frame • 48 – 449 Frame • 1 – 300 HP (TEBC) • 3600 and 1800 RPM • 3 – 4000 HP • 3600, 1800 and 1200 RPM
• Energy and NEMA Premium®† efficient • Energy and NEMA Premium®† efficient • 143 – 449 Frame • 56 – 215 Frame • 3600, 1800, 1200, 900, 720, 600 and 514 RPM • 56 – 215 Frame
• Cast iron frame and brackets • 0 – 1800 RPM • High torque or extra high torque • 182 – 9608 Frame • Foot mounted, C-Face Footed and Footless
ACCU-Torq® 2000:1
• Ball and roller bearing options C-Face: ODP, TEFC and Hazardous Location • Constant torque near zero RPM Constant Torque • Designed for high or normal thrust • Compliant with EISA Standards
• Single Phase, Split Phase and Capacitor Start • Three-year limited warranty on inverter power* Automotive Duty, U-frame • Available in Vertical HOLLOSHAFT® and
Three Phase, TEFC, CORRO-DUTY® • Three Phase, Footed and Footless options • Three Phase, TEFC Vertical Solid Shaft Paint-Free Washdown
• 1 – 400 HP • 1/12 – 60 HP Inverter Duty • 1/4 – 300 HP • Three Phase, TENV
• 3600, 1800 and 1200 RPM • 3600, 1800 and 1200 RPM • Three Phase, ODP and TEFC • 3600, 1800, 1200 and 900 RPM Close Coupled Pump • 1/2 – 10 HP
• 143 – 449 Frame • 56 – 326 Frame; TEFC to 400 Frame • 1 – 200 HP • 56 – 5008 Frame • Single and Three Phase, ODP, TEFC • 1800 RPM
• All cast iron construction • Standard, Energy and Premium Efficient • 3600, 1800 and 1200 RPM • Meets General Motors®† GM-7EQ & GM-7EH, and Hazardous Location • 56 – 215TC Frame
• NEMA Premium®† efficient • 143 – 447 Frame Ford®† EM1, and Chrysler®† NPEM-105 spec • 1 – 60 HP • VBX®† bearing isolators by Inpro/Seal®†
• Ball and roller bearing options Single Phase, Split Phase, ODP and TEFC • Meets NEMA®† MG1 Part 31 requirements • 3600 and 1800 RPM • Inverter Duty
• 1/12 – 3/4 HP for inverter duty Fire Pump Motor • 143 – 326 Frame • Compliant with EISA Standards
Three Phase, TEFC, 841 PLUS® • 3600, 1800, 1200 and 900 RPM • Three Phase, ODP • JM and JP shafts available
• 1 – 400 HP; All cast iron frame • 48 – 56 Frame Hot Water Circulator Pump • 7-1/2 – 500 HP • Energy and NEMA Premium®† Efficient Stainless Steel Washdown
and brackets • Rigid welded and cradle bases • Single and Three Phase, ODP • 3600 and 1800 RPM • Three Phase, TENV and TEFC
• 3600, 1800 and 1200 RPM • Single and two speed options • 1/12 – 1-1/2 HP • 184 – 449 Frame Elevator Duty • 1/2 – 10 HP
• 143 – 449 Frame • C-Face Footed and Footless • 1800 RPM • UL®† listed for fire pump application • Single and Three Phase • 3600 and 1800 RPM
• VBXX®† bearing isolators by Inpro/Seal®† • Automatic or manual reset thermal overload protector options • 48 and 56 Frame • Available in horizontal frame and vertical JP close couple pumps • Submersible and Dry Hydraulic • 56HC – 215TC Frame
helps protect bearings • Direct replacement motor for B&G®† • 3 – 75 HP • All stainless steel construction
†
• Meets IEEE®† 841 GM7E-TA specifications Single Phase, Capacitor Start, ODP and TEFC (Bell & Gossett), Taco®† and Thrush™ Commercial and Residential Water System Pumps • 3600, 1800 and 1200 RPM • Rust inhibitor on stator and rotor
• Five-year limited warranty* • 1/8 – 10 HP brand circulator pumps • Single and Three Phase, ODP and TEFC • Z and L32 flange mounting • Compliant with EISA Standards
• NEMA Premium®† efficient • 3600, 1800 and 1200 RPM • 1/3 – 3 HP
• 48 – 215 Frame Carbonator Pump • 3600 and 1800 RPM Cooling Tower
Hazardous Location • Rigid welded and cradle bases • Single Phase, ODP • 48 and 56 Frame • Three Phase, TEFC and TEAO
• Single and Three Phase, TEFC • C-Face Footed and Footless • 1/4 – 1/2 HP • C-Face, square flange • 2 – 100 HP
• 1/4 – 150 HP • Automatic or manual reset thermal overload protector options • 1800 RPM • Footed and Footless • 1800, 1200, 1800/900 and
• 3600, 1800, 1200 and 900 RPM • 48 Frame 1200/600 RPM
• 56 – 445 Frame TITAN® Horizontal Pool and Spa Motor • 145 – 447 Frame
• Energy and premium efficient • Three Phase, ODP, WPI, WPII, TEFC Air Compressor • Single and Three Phase, ODP • Single and two speed
• Class I, Group D; Class I, Groups C and and Hazardous Location • Single Phase, ODP • 1/2 – 5 HP • NEMA Premium®†/inverter duty
D, and Class II, Groups E, F, and G • 150 – 4000 HP • 1/2 – 5 HP • 3600 RPM • Replacement for Baltimore Aircoil Company,®† Evapco®†
• 3600, 1800, 1200, 900, 720 and 600 RPM • 3600 RPM • 48 and 56 Frame and SPX Cooling Technologies (Marley®†)
Three Phase, TEFC, UNIMOUNT® and STEEL EDGE® • 449 – 9608 Frame • 56, 143 and 184 Frame • Thru-bolt, C-Face and square flange • Stock Ratings Available
• 1/4 – 30 HP • 460 – 6900 Volts • High breakdown torque • UL®† 1081, 1795 and 1563 design – TEFC 3-40HP@1800 RPM
• 3600, 1800, 1200 and 900 RPM • Ball or sleeve bearings available – TEAO 5-50HP@1800 RPM
• 56 – 286 Frame Gate and Door Motors ECOTECH EZ® Variable Speed Motor and Control
• Energy and NEMA Premium®† efficient • Single and Three Phase, ODP and TEFC • 6.5" Frame Diameter; 56J C-Face
• C-Face, Footed and Footless and • 1/3 – 1 HP or 56Y Square Flange frame
removable base • 1800 RPM • 3 HP, Variable RPM; Category J
All high performance motors carry a nameplate including a NEMA Premium ®† trademark and European IE efficiency
• 56 and 56C Frames • Freeze Sensor
marks, providing a clear means for both users and OEM’s to determine global regulatory compliance for their application.
• Fully integrated motor control
In addition to a full line of horizontal motors, the U.S. MOTORS ® line of vertical motors are available at premium efficiency
Brake Motor
levels to address customer requirements.
• Three Phase, TEFC with Brake Added 2EZ® Speed Motor and Control
• 1/3 – 20 HP • 6.5" Frame Diameter; 56J C-Face U.S. MOTORS ® is a registered trademark of Nidec Motor Corporation. For more information about the U.S. MOTORS ®
• 1800 and 1200 RPM or Square Flange brand visit www.nidec-motor.com or www.usmotors.com.
A Variety of Conversion Options Available to Maximize Stock Flexibility
• 56 – 256 Frame • 3/4 – 2 HP; 3450/1725 RPM
When quick deliveries are required on customized motors, our expansive inventory can be customized to provide special features.
• Rigid base, C-Face, Footed and Footless • Freeze Sensor
Our experienced Factory Technicians specialize in stock motor modifications to offer a speedy response to customer needs.
• Fully integrated motor control
Conversion Centers are located in Southaven, MS and Los Angeles, CA.
†All marks shown within this document are properties of their respective owners.
*For details, refer to: www.usmotors.com