Documente Academic
Documente Profesional
Documente Cultură
In this model with 305 mm screw spacing on centre in Model Yield 10.08 24.44
field the maximum screw shear force doesn’t occur at the Capacity
perimeter but occur in the field connections, then the field
screw spacing is decreased to 150 mm on centre in field, Link Defined
the maximum screw shear force occur at the perimeter as Model Nominal 14.34 32.79
expected and the capacity is increased to 24.14 kN/m.
Lateral force is increased up to first nonlinear link yielded Shear Capacity
and the corresponding displacement is obtained as yield
displacement. After yield point lateral force is increased The explanations in the legends of the graphs refer to the
incrementally as other links are yielded up to the frame following analyses results:
become unstable and the corresponding displacements are
1. “IBC values for wind forces” refer to Table 2211.2(1)
read. By this way, lateral capacity vs. displacement curve
is obtained. of IBC 2006 “nominal shear values for wind forces in
REFERENCES
[1] S. Argali: Sektör atilimlarini surduruyor, Dünya
insaat, 18, 2001, pp. 48-49
Comparison of Constraint defined Model yield Capacity [2] Akbas B., Shen J., Dincer T., “Effect of Oriented
Strand Board Panels on the Lateral Stiffness of
with IBC nominal shear values for wind and seismic
Lightweight Frames”, International IASS Symposium
forces on Lightweight Structures in Civil Engineering,
Warsaw, Poland, 24-28 June, 2002.
[3] Anonymous: Celik yapilara talep artiyor, Dünya
insaat, 17, 2000, pp. 28-29
[4] APA, The Engineered Wood Association, Form
No:TT-020, “Recommended Bearing Strength of
wood Structural Panels to be used with fastener yield
equation”, (2002)
[5] Gad, E.F., Duffield, C.F., Hutchinson, G.L., Mansell,
D.S., and Stark, G., (1999a). “Lateral Performance of
Cold-Formed Steel-Framed Domestic Structures”, J.
Eng. Struct., 21(1), 83-95
[6] Gad, E.F., Chandler, A.M., Duffield, C.F., and
Hutchinson, G.L., (1999b), “Lateral Performance of
Plasterboard-Clad Residential Steel Frames”, J.
Struct. Eng., ASCE, 125(1), 32-39.
[7] Kawai Y, Kanno R, Uno N, Sakumoto Y. Seismic
resistance and design of steel framed houses, Nippon
Steel Technical report, No. 79, 1999
[8] Uygar, Celaletdin
[9] www.google.com , www.sciencedirect.com
Comparison of Nonlinear Link defined Model yield
Capacity with IBC nominal shear values for wind and
seismic forces