Documente Academic
Documente Profesional
Documente Cultură
Systems
Catalogue
Applica- Planning & Measuring Drilling & Cutting & Fastening & Insulation & Professional &
tion Specifying Demolition Grinding Installation Protection Services
Specification Distance Drilling & Cutting Direct Foam Systems Repair Service
Consulting Measuring Chiseling Sanding Fastening Fire Stopping Lifetime Service
Engineering Leveling & Diamond Diamond Screw
Software Aligning Systems Systems Fastening
Sensing Anchoring
Installation
We are committed to excellence in innovation, total quality, direct customer relationships and effective marketing.
Contents
Description Pages
Technical Information 13 - 24
page 3
PC Software
Professional assistance.
and Technical
PC Software
System MM
Light duty
Medium duty
System MQ
Hilti Pipe Rings
Technical seminars
Medium duty
System MQ
We offer technical seminars regarding Hilti engineered products free of charge, covering various topics ranging from the princi-
HDG
ples behind these products to the most commonly used international norms and standards.
Material estimation
For all the firestopping applications at site, we provide you free of charge material estimations for the most cost-effective, tested
Stainless Steel
and approved system, based on the firestop estimation form filled by you.
Medium duty
System MQ
Engineering judgements will be provided free of charge by certified Hilti Fire Protection Engineers. These judgements represent
firestop systems that would be expected to pass the stated ratings and requirements if tested, for those situations where a
tested system is not doable at site.
Fixed points
System MQ
and sliders
Pullout test
We will provide pullout testing free of charge. A qualified Hilti representative will check on site if the trained workers already know
how to properly install anchors and/or verify the loads in case of uncertain base material strength. Number of free pullout tests
will be provided as per the Hilti policy.
Airconditioning
and Ventilation
To assist the customer in verifying proper installation according to the approved firestop systems and to facilitate the require-
ments of the project’s official firestop inspectors, a qualified Hilti representative will do random spot inspections on site free of
charge.
Our experienced technical staff give you support to ensure things are done right first time. We can help with bidding, norm and
non-norm specification and provide individual type catalogues. Plans, materials lists, calculations and drawings for larger pro-
jects are part of the package. Hilti project managers assist by coordinating logistics services and technical support for defined
projects.
page 4
PC Software
PROFIS Installation
Profis Installation is a Hilti PC applications for the static design of 3D structures
assembled from Hilti channel installation system components. It is suitable for use
with Microsoft Windows®.
page 5
PC Software
for industry
Hilti as supplier and partner for industry with his successful
assembly systems MI and MQ knows the importance of
software in the planning process. In assistance of this process
Medium duty
System MM
Light duty
Hilti offers libraries and/or special tools for the most important
plant design software. These libraries and tools assist the
designer to use the Hilti assembly systems in the same way like
pipe parts or welded steel construction. This means placing
parts in the standard software program including automatically
generating drawings and bill of material.
Medium duty
System MQ
Hilti Pipe Rings
page 6
PC Software
Easy to learn
Start working in just minutes with the user-
friendly interface.
Exclusive features:
n Comprehensive, easy-to-use anchor selector feature
n Database of exportable CAD drawings for all Hilti anchors via drag-and-drop menu
n Baseplate shaping in 3D modeling using finite element analysis for baseplate thickness
calculation
n Free anchor location in 2D/3D modeling application
n Save personalized user preferences
page 7
PC Software
Design software
and Technical
PC Software
Information
The challenge
Construction technology is in a state of ongoing development. Modern, eye-
catching designs, new materials and special requirements to be met by the
building all present a challenge and place high demands on facade design
engineers.
Medium duty
System MM
Light duty
IT systems have now become firmly established as essential tools for planners
and design engineers. They support these specialists in many areas of their work
and help them increase efficiency considerably, not only during planning but also
in the implementation phase.
Medium duty
System MQ
be able to make their own settings to suit their own needs, that the method of
calculation and the results should be transparent and well documented and,
moreover, that other documents and product information should be quickly and
easily available.
information in the form of PC software under the name PROFIS. The fastening
design applications of particular interest to facade planning engineers are Hilti
PROFIS Anchor Channel and PROFIS Anchor. At Hilti, we not only guarantee the
quality of our products, we also believe that making the latest developments
Stainless Steel
page 8
Notes
page 9
Notes
Technical Information
M 16
M 12
M 10
Threaded rod
888
350
200
100
50
444
175
100
50
100
296
116
66
33
150
222
87
50
25
200
177
68
32
13
250
137
40
19
0
300
Distance “L” between base material and pipe axes
Load and bend values for threaded rods (4.8)
Technical Information
page 13
System MQ System MQ System MQ System MQ System MM PC Software
Airconditioning Fixed points System MI Medium duty Medium duty System MQ Light duty and Technical
Firestop systems and Ventilation and sliders HDG Stainless Steel HDG Hilti Pipe Rings Medium duty Medium duty Information
Technical Information
System MM
4 1000 3 3 3 3 3
HDG
Length of
System MQ
Pipe Number
channel*
DN of pipes 1 1.5 2 2.5 3
[mm]
HKD HKD HKD Direct
HUS-I 6 Direct fastening** HUS-P 6
M6x25 M8x25 M10x25 fastening***
15 4 500 2 2 2 2 X-HS_X-U 32/ DKH 48 2 GHP20/XU-27
6 500 2 2 2 2 X-HS_X-U 32/ DKH 48 2 GHP20/XU-27
8 600 2 2 2 2 X-HS_X-U 32/ DKH 48 2 GHP20/XU-27
10 700 2 2 2 2 X-HS_DKH 48 2 GHP20/XU-27
20 4 600 2 2 2 2 X-HS_DKH 48 2 GHP20/XU-27
System MI
8 800 2 2 2 2 X-HS_DKH 48 2
10 1000 2 2 2 2 X-HS_DKH 48 2
40 4 600 2 2 2 2 X-HS_DKH 48 2
6 700 2 2 2 2 X-HS_DKH 48 2
8 800 2 2 2 2 X-HS_DKH 48 2
50 2 600 2 2 2 2 X-HS_DKH 48 2
4 700 2 2 2 2 X-HS_DKH 48 2
6 800 2 2 2 2 X-HS_DKH 48 2
Airconditioning
and Ventilation
65 2 600 2 2 2 2 X-HS_DKH 48 2
System MQ
4 800 2 2 2 2 X-HS_DKH 48 2
6 1000 3 3 3 3 3
80 2 600 2 2 2 2 2
4 1000 3 3 3 3 3
6 1200 3 4 3 3 3
100 2 600 2 2 2 2 2
4 1000 3 4 3 3 3
Firestop systems
* Length of channel: Distance between fastening points; the channels can be 100 mm longer at each side.
MM-C16
** With respect to all relevant details for X-HS fasteners see technical data sheet: Fastening of MM-C channels with DX-fasteners
MM-C30 Valid for concrete strenght up to C 30/37 (X-HS U 32) and C 50/60 (DX-Kwik with X-HS DKH).
MM-C36 *** With respect to all relevant details see technical data sheet: Fastening of MM-C channels with DX-fasteners
For GX 120-ME Specifically to observe for channel fastenings directly to the ceiling:
For GX 120-ME gas-actuated tool: At least 5 fastening points per channel. All visible failures when driving fasteners must be repeated. Applies to concrete grades up to C30/37.
For DX 460-F8 powder-actuated fastening tool: At least 5 fastening points per channel. All visible failures when driving fasteners must be repeated. Applies to concrete grades up to C50/60.
page 14
Technical Information
and Technical
PC Software
Information
Span width [in m] Fastening on concrete
(distance between channels)
Length of
Pipe Number
channel*
DN of pipes 1 1.5 2 2.5 3
[mm]
HKD HKD HKD Direct
HUS-I 6 Direct fastening** HUS-P 6
M6x25 M8x25 M10x25 fastening***
15 4 500 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
6 500 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
Medium duty
System MM
Light duty
8 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
10 700 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
20 4 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
6 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
8 700 2 2 2 2 X-HS_DKH 48 2 GHP20/XU-27
10 800 2 2 2 2 X-HS_DKH 48 2 XU-27
25 4 600 2 2 2 2 X-HS_DKH 48 2 XU-27
6 600 2 2 2 2 X-HS_DKH 48 2 XU-27
8 700 2 2 2 2 X-HS_DKH 48 2 XU-27
Medium duty
System MQ
10 800 2 2 2 2 X-HS_DKH 48 2 XU-27
32 4 600 2 2 2 2 X-HS_DKH 48 2 XU-27
6 700 2 2 2 2 X-HS_DKH 48 2 XU-27
8 800 2 2 2 2 X-HS_DKH 48 2
10 1000 2 2 2 2 X-HS_DKH 48 2
40 4 600 2 2 2 2 X-HS_DKH 48 2 XU-27
6 700 2 2 2 2 X-HS_DKH 48 2 XU-27
8 800 2 2 2 2 X-HS_DKH 48 2
Medium duty
100 2 600 2 2 2 2 2
System MQ
4 1000 3 3 3 3 3
HDG
Metal composite pipes (Geberit Mepla)
Span width [in m] Fastening on concrete
(distance between channels)
Stainless Steel
Length of
Medium duty
Pipe Number
System MQ
channel*
DN of pipes 1 1.5 2 2.5 3
[mm]
HKD HKD HKD Direct
HUS-I 6 Direct fastening** HUS-P 6
M6x25 M8x25 M10x25 fastening***
15 4 500 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
6 500 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
8 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
10 700 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
20 4 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
System MI
6 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
8 700 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
HDG
10 800 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
25 4 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
6 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
8 700 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
10 800 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
32 4 600 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
6 700 2 2 2 2 X-HS_X-U 32/DKH 48 2 GHP20/XU-27
Fixed points
System MQ
and sliders
* Length of channel: Distance between fastening points; the channels can be 100 mm longer at each side.
MM-C16
** With respect to all relevant details for X-HS fasteners see technical data sheet: Fastening of MM-C channels with DX-fasteners
MM-C30 Valid for concrete strenght up to C 30/37 (X-HS U 32) and C 50/60 (DX-Kwik with X-HS DKH).
For GX 120-ME *** With respect to all relevant details see technical data sheet: Fastening of MM-C channels with DX-fasteners
Specifically to observe for channel fastenings directly to the ceiling:
For GX 120-ME gas-actuated tool: At least 5 fastening points per channel. All visible failures when driving fasteners must be repeated. Applies to concrete grades up to C30/37.
Firestop systems
For DX 460-F8 powder-actuated fastening tool: At least 5 fastening points per channel. All visible failures when driving fasteners must be repeated. Applies to concrete grades up to C50/60.
page 15
Sheet 1,25
Sheet 1,25
Weights and selection of channel without insulation
Sheet 1,13
Sheet 1,13
Sheet 1,0
Sheet 1,0
Sheet 0,88
Sheet 0.88
Technical Information
Sheet 0,75
Sheet 0.75
page 16
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Sheet 0,75
Sheet 0.75
Sheet 0,88
Sheet 0.88
Sheet 1,0
Sheet 1,0
Sheet 1,13
Sheet 1,13
Weights and selection of channel with insulation
Sheet 1,25
Sheet 1,25
Technical Information
page 17
System MQ System MQ System MQ System MQ System MM PC Software
Airconditioning Fixed points System MI Medium duty Medium duty System MQ Light duty and Technical
Firestop systems and Ventilation and sliders HDG Stainless Steel HDG Hilti Pipe Rings Medium duty Medium duty Information
Sheet 1,25
Sheet 1,25
Weights and selection of channel without insulation
Sheet 1,13
Sheet 1,13
Sheet 1,0
Sheet 1,0
Sheet 0.88
Sheet 0,88
Technical Information
Sheet 0.75
Sheet 0,75
page 18
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Sheet 0,75
Sheet 0.75
Sheet 0,88
Sheet 0.88
Sheet 1,0
Sheet 1,0
Sheet 1,13
Sheet 1,13
Weights and selection of channel with insulation
Sheet 1,25
Sheet 1,25
Technical Information
page 19
System MQ System MQ System MQ System MQ System MM PC Software
Airconditioning Fixed points System MI Medium duty Medium duty System MQ Light duty and Technical
Firestop systems and Ventilation and sliders HDG Stainless Steel HDG Hilti Pipe Rings Medium duty Medium duty Information
Sheet 1,25
Sheet 1,25
Weights and selection of channel without insulation
Sheet 1,13
Sheet 1,13
Sheet 1,0
Sheet 1,0
Sheet 0.88
Sheet 0,88
Technical Information
Sheet 0.75
Sheet 0,75
page 20
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Sheet 0,75
Sheet 0.75
Sheet 0,88
Sheet 0.88
Sheet 1,0
Sheet 1,0
Sheet 1,13
Sheet 1,13
Weights and selection of channel with insulation
Sheet 1,25
Sheet 1,25
Technical Information
page 21
System MQ System MQ System MQ System MQ System MM PC Software
Airconditioning Fixed points System MI Medium duty Medium duty System MQ Light duty and Technical
Firestop systems and Ventilation and sliders HDG Stainless Steel HDG Hilti Pipe Rings Medium duty Medium duty Information
Technical Information
page 22
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Maximum loads for a fire rating of 30 minutes Maximum loads for a fire rating of 90 minutes
Fastening means M10 OR M12 anchor / threaded rod with MQZ-L11 or M10 OR M12 anchor / threaded rod with HQZ-L11 or
Fastening means
MQZ-L13 baseplates MQZ-L13 baseplates
Type of fastening suspended direct suspended suspended suspended direct suspended direct Type of fastening suspended direct suspended suspended suspended direct suspended direct
(cm) 3.00 - 2.00 - 1.70 - 1.50 - (cm) 1.00 - 0.90 - 0.80 - 0.80 -
Total Uniform load ≤ (kN) 1.30 1.80 0.85 1.50 0.70 1.30 0.60 1.10 Total Uniform load ≤ (kN) 0.40 0.65 0.35 0.50 0.35 0.45 0.35 0.40
1 single load of ≤ (kN) 0.75 1.20 0.50 0.95 0.40 0.80 0.35 0.70 1 single load of ≤ (kN) 0.25 0.40 0.20 0.31 0.20 0.28 0.20 0.25
2 single load of ≤ (kN) 0.50 0.90 0.35 0.70 0.30 0.62 0.25 0.51 2 single load of ≤ (kN) 0.18 0.30 0.14 0.23 0.14 0.21 0.14 0.19
3 single load of ≤ (kN) 0.30 0.58 0.24 0.50 0.20 0.42 3 single load of ≤ (kN) 0.11 0.19 0.11 0.17 0.11 0.15
4 single load of ≤ (kN) - 0.20 0.42 0.17 0.35 4 single load of ≤ (kN) - 0.09 0.14 0.09 0.12
- -
5 single load of ≤ (kN) - 0.15 0.30 5 single load of ≤ (kN) - 0.08 0.11
Maximum loads for a fire rating of 60 minutes Maximum loads for a fire rating of 120 minutes
M10 OR M12 anchor / threaded rod with MQZ-L11 or M10 OR M12 anchor / threaded rod with HQZ-L11 or
Fastening means Fastening means
MQZ-L13 baseplates MQZ-L13 baseplates
Type of fastening suspended direct suspended suspended suspended direct suspended Type of fastening suspended direct suspended suspended suspended direct suspended direct
1 single load of ≤ (kN) 0.40 0.60 0.30 0.50 0.25 0.44 0.25 0.38 1 single load of ≤ (kN) 0.18 0.38 0.18 0.28 0.18 0.25 0.18 0.23
2 single load of ≤ (kN) 0.25 0.45 0.20 0.38 0.18 0.33 0.18 0.28 2 single load of ≤ (kN) 0.12 0.28 0.12 0.21 0.12 0.18 0.12 0.17
3 single load of ≤ (kN) 0.16 0.31 0.14 0.27 0.14 0.23 3 single load of ≤ (kN) 0.10 0.17 0.10 0.15 0.10 0.13
4 single load of ≤ (kN) - 0.11 0.22 0.11 0.19 4 single load of ≤ (kN) - 0.08 0.12 0.08 0.11
- -
5 single load of ≤ (kN) - 0.10 0.16 5 single load of ≤ (kN) - 0.07 0.10
Technical Information
page 23
System MQ System MQ System MQ System MQ System MM PC Software
Airconditioning Fixed points System MI Medium duty Medium duty System MQ Light duty and Technical
Firestop systems and Ventilation and sliders HDG Stainless Steel HDG Hilti Pipe Rings Medium duty Medium duty Information
Technical Information
page 24
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
System MM
Light Duty
Medium Duty
System MM
Description Pages
Bracket MM-B 30
page 27
System MM
Definition of axes
Information
) )
H H
\D[LV
H H
RSHQ
]D[LV
MM-C-16 MM-C-30 MM-C-36 MM-C-45
Channel wall thickness t [mm] 1,0 1,0 1.75 / 1.0 1.75
Medium duty
System MM
Sendzimir galvanised • • • •
Cross-section values
Y-axis
Axis of gravity “open” 1) e1 [mm] 9,26 16,58 19,77 23,78
Axis of gravity e2 [mm] 7,08 13,75 16,74 21,62
Moment of inertia Iy [cm4] 0,25 1,20 3,01 5,33
Hilti Pipe Rings
• The given data is based on a single span (simply-supported beam) bearing a single load, F(N), at mid span, L/2.
• If several loads are acting on a single span (simply-supported beam), these may be summated and regarded as
a single load acting at mid span. By taking this approach, the design calculation is on the safe side. (➝ Channel
selection table).
Stainless Steel
• The permissible stress in the steel and the max. deflection, L/200, are not exceeded with the given max. span
Medium duty
System MQ
widths, L (mm).
• The permissible stress σD / γG/Q where γ =1.4. σD results from the higher yield strength (point) resulting from cold
forming as per DAST-RILI 016 dated 1992: σD = fyk / γM where γM = 1.1
System MQ
Firestop systems
1) The smaller value (Wy1, Wy2) is decisive for the calculated bending dimension (Wy1 = Iy / e1 or Wy2 = Iy / e2 )
2)
page 28
System MM
Installation channel
and Technical
MM-C
PC Software
Information
The innovative channel system for light and medium-duty installations
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn Light and medium-duty pipe support systems MM-C
nn Fastening ventilation ducts and cable trays
Material composition S250GD as per DIN EN 10346
Surface Finish Sendzimir galvanized
Advantages
Medium duty
System MQ
4
HDG
[
Stainless Steel
Medium duty
System MQ
Nr. Height - H Length - L Thickness Weight per m Order designation Sales Item Number
length Quantity
System MI
30 mm 3m 1 mm 779 g Install. channel MM-C-30 3m M10 18 m 00418776
HDG
30 mm 3m 1 mm 779 g Install. channel MM-C-30 3m M10 18 m 2038062*
36 mm 3m 1.75 mm 1.29 kg Install. channel MM-C-36 3m M10 18 m 00418751
4 45 mm 3m 1.75 mm 1.88 kg Install. channel MM-C-45 3m 18 m 2048104
Fixed points
System MQ
and sliders
Firestop systems
page 29
System MM
Bracket
and Technical
MM-B
PC Software
Information
System MM
Light duty
Medium duty
System MQ
Medium duty
System MQ
HDG
Stainless Steel
Medium duty
System MQ
Nr. Length - L Bar height Weight Order designation Sales Quantity Item Number
Angle brace
MM-AB
Airconditioning
and Ventilation
System MQ
Ordering
Firestop systems
Length - L Height - H Angle Weight Order designation Sales Quantity Item Number
page 30
System MM
and Technical
PC Software
Type of load 1: uniform Type of load 2: single Type of load 3 Type of load 4 Type of load 5
Information
F1 F1 F1F1 FF1F12 F2 F1F1 F2 F2 F3 FF31 F3F2 F2 FF3 1F3F2F3 F2 F3 FF32 F3F2 F3 F3 F3 F3 F3 F3
F1 = q x l F1 = q1x/2l 1/ F1 =
2 q x l1/2 F11/=2 q x l 1/2 F1 1=/2 q x l 1/2 1/3 1/12/3 1/3 1/2 1/
1/2 1/ 11/4/ 1/4 1/41/31/4 1/3 1/31/ 1/1/31/ 1/13/ 1/3 1/4 11/4/3 1/41/31/4 1/3 1/4 1/4 1/4 1/4 1/ 1/ 1/ 1/
4 4 4 4
3 3 3 4 4 4 4
Medium duty
System MM
MM-B-36/450 450 810 810 400 400 270
Light duty
MM-B-36/600 600 610 610 300 300 200
Technical data for brackets with angle brace (channel opening facing down)
Type of load 1: uniform Type of load 2: single Type of load 3 Type of load 4 Type of load 5
Medium duty
System MQ
F1 [N] F1 [N] F1 [N] F2 [N] F3 [N]
Channel
Bracket L (mm) HST M10 or HUS 8 HST M10 or HUS 8 HST M10 or HUS 8 HST M10 or HUS 8 HST M10 or HUS 8
MM-B-30/200 200 2990 2730 1490 1490 990
MM-B-30/300 300 1990 1990 990 990 660
MM-B-36/300 300 1990 1990 990 990 660
MM-B-36/450 450 1320 1320 660 660 440
MM-B-36/600 600 990 990 470 490 330
Medium duty
System MQ
MM-B-30/300 300 3060 3060 1360 1530 1020
MM-B-36/300 300 3060 3060 1530 1530 1020
HDG
MM-B-36/450 450 2030 2030 1010 1010 670
MM-B-36/600 600 1520 1520 470 760 500
Stainless Steel
Separate verification must be provided that forces are transferred to the respective base material, i.e. steel and concrete.
Medium duty
System MQ
The application guidelines in anchor approvals must be observed. Loading values according to approval status January 2010.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 31
System MM
T-head bolt
and Technical
MM-ST
PC Software
Information
With a unique fastening mechanism for great versatility and higher productivity
Medium duty
System MM
Light duty
Medium duty
System MQ
Technical data
Applications
nn Fastening light and medium-duty piping MM-ST
Material composition Plate: DD11 as per DIN EN 10111,
Nut: DC04 as per DIN EN 10130
Advantages
Surface Finish Galvanized
nn Extremely fast installation thanks to the unique fastening
Hilti Pipe Rings
mechanism
nn Easy height adjustment within the installation channel
nn Greater versatility thanks to various threaded rod lengths
nn Serrated surfaces for easy, accurate adjustment
Medium duty
System MQ
HDG
0[
Stainless Steel
Medium duty
System MQ
System MI
thread
System MQ
Rec. tensile load, Zrec (N) Rec. shear load, Qrec (N) Bending moment, Tighting torque,
threaded rod 4.6 Md (Nm)
Item no. Channel I Channel II Channel I Channel II (Nm)1)
MM-ST M8 1200 1500 1000 1000 6,4 12
Firestop systems
page 32
System MM
and Technical
MM-S
PC Software
Information
The superior solution for attaching threaded rods to channels
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn Installing threaded rods for pipe and air duct suspension systems MM-S
Material composition S355 MC as per DIN EN 10149-2
Advantages Surface Finish Galvanized
Medium duty
System MQ
HDG
Stainless Steel
Medium duty
System MQ
Connection thread Weight Order designation Sales Quantity Item Number
System MI
M8 25 g Pipe ring saddle MM-S M8 25 pc 00418760
HDG
M10 24 g Pipe ring saddle MM-S M10 25 pc 00418761
Rec. tensile load, Zrec (N) Rec. shear load, Qrec (N) Bending moment, Tighting torque,
Fixed points
System MQ
and sliders
page 33
System MM
Wing nut
and Technical
MM-WN
PC Software
Information
System MM
Light duty
Medium duty
System MQ
Rec. tensile load, Zrec (N) Rec. shear load, Qrec (N) Tighting torque,
Item no. Channel I Channel II Channel I Channel II Md (Nm)
Fixed points
System MQ
and sliders
page 34
System MM
Angle
and Technical
MM-A-90 / MM-AH-90
PC Software
Information
Ideal for use with channels in various positions
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn Assembly of frames and supporting structures MM-A-90
nn Joining channels at right angles
Material composition DC04 as per DIN EN 10130
nn Recommended for U-frame structures
Surface Finish Galvanized
Additional product information Pre-assembled bolts
Advantages
Medium duty
System MQ
HDG
Stainless Steel
Medium duty
System MQ
System MI
HDG
Fixed points
System MQ
and sliders
Rec. tensile load, Zrec (N) Rec. shear load, Qrec (N) Tighting torque,
Airconditioning
and Ventilation
Md (Nm)
System MQ
page 35
System MM
Rail support
and Technical
MM-R-16-36
PC Software
Information
System MM
Light duty
Medium duty
System MQ
Rec. tensile load, Zrec (N) Rec. shear load, Qrec (N) Tighting torque,
Item no. Channel I Channel II Channel I Channel II Md (Nm)
Fixed points
System MQ
and sliders
System MQ
Firestop systems
page 36
System MM
Beam clamp
and Technical
MM-T-16-36
PC Software
Information
New beam clamp allows fastening from both sides of the channel
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn Fastening all three types of MM channel profiles to steel beams MM-T-16-36
nn The beam clamp set fits all common T-beams (max. clamping
Material composition Material: EN-GJMB-550-4 as per
thickness 23mm)
DIN EN 1562,
Screw: grade 8.8
Medium duty
System MQ
HDG
Stainless Steel
Medium duty
System MQ
System MI
Weight Order designation Sales Quantity Item Number
HDG
106 g Beam clamp MM-T-16-36 20 00418763
and sliders
Md (Nm) Md (Nm)
Item no. Channel I Channel II
MM-T-16-36 1200 2500 3 10
Firestop systems
page 37
System MM
Rubber inlay
and Technical
MM-RI
PC Software
Information
System MM
Light duty
Medium duty
System MQ
temperature range
nn Suitable for all three types of MM channel profiles and M8/M10
threaded rods Average noise reduction 14 dB(A)
nn Prevents direct contact between the air duct and the channel For use with MM-C-16, MM-C-30, MM-C-36,
MM-C-45
nn Large contact area between the channel insulation profile and
the air duct avoids transmission of vibration and
structure-borne sound
Medium duty
Channel washer
MM-CW
For easy installation of threaded rods
System MI
HDG
Fixed points
System MQ
and sliders
page 38
System MM
and Technical
MM-E
PC Software
Information
Suitable for all installation channels
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn Installation channel edge protection MM-E
Additional product information Made of polypropylene (PP),
Advantages suitable for all MM installation
channels
nn Suitable for all installation channels
Medium duty
System MQ
HDG
Stainless Steel
Nr. For use with Weight Order designation Sales Quantity Item Number
Medium duty
System MQ
MM-C-16 2g Channel end cap MM-E-16 50 pc 00418773
MM-C-30 3.2 g Channel end cap MM-E-30 50 pc 00418774
MM-C-36 4g Channel end cap MM-E-36 50 pc 00418775
4 MM-C-45 Channel end cap MM-E-45 50 pc 2048095
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 39
Notes
MQ Channel Installation
Galvanized
Hilti. Outperform. Outlast.
page 22
System MQ
Description Pages
Swivel beam blamp MQT-G and Retaining strap for swivel beam clamp
63
MQT-G
Channel Accessories 65
3D System 66
page 43
System MQ
2.5
Information
2.75
Definition of axes 2
124
2.5
124
F F
82.6
2
72
e2 e1
2
2
52
41.2
2.75
41.3
y-axis
41.3
31
20.6
e1 e2
41.3 41.3 41.3 41.3 41.3 41.3 41.3 41.3 41.3 41.3
"open" z-axis
Medium duty
System MM
Light duty
Medium duty
System MQ
Hilti Pipe Rings
Medium duty
System MQ
HDG
System MQ
Select the line showing the load, F = 1.0 kN. 1 kg 1 – 10 0.01 L [cm]
The MQ-31 to MQ-124X D channels can be used because the 1N 0.1 0.1 – 0.001
permissible span width (tabulated value) is larger or equal
to the required span, L = 100 cm. 1 kN 100 100 1000 – F
1)
The smaller value (W y1 , W y2 ) is decisive for the calculated bending dimension (W y1 = I y/e 1 or W y2 = I y/e 2).
2)
Perm. M y = σzul. · min. (W y1 , W y2 ) f[mm]
page
page 244
System
System
page 25
MQ
SystemMQ
page 45
MQ
Load, F (kN)
System MM
MQ-52
F[kN]
Light duty
10.00 MQ-41/3
MQ-41
L/2 L/2
L[cm] 5.00 MQ-31
MQ-21
Medium duty
System MQ
0.00
0 25 50 100 150 200 250 300
Span width (cm)
Load, F (kN)
30.00
MQ-124X D
Hilti Pipe Rings
25.00
20.00
Medium duty
System MQ
15.00
HDG
MQ-52-72D
10.00
MQ-41D
Stainless Steel
Medium duty
System MQ
5.00
MQ-21D
0.00
0 25 100 200 300 400 500 600
Span width (cm)
2
124
2.5
124
F[kN]
2
82.6
2
72
2
2
52
41.2
2.75
Fixed points
41.3
41.3
System MQ
and sliders
L/2 L/2
31
20.6
Span width,
L (cm)
25 2 .5 3 <1 4 .6 8 <1 7 .0 8 <1 9 .7 8 0 .2 1 2 .3 6 <1 2 1 .7 5 <1 3 .0 0 <1 6 .0 0 <1 1 1 .2 0 <1
Airconditioning
and Ventilation
System MQ
200 0 .1 0 1 0 .0 0 .3 1 1 0 .0 0 .6 5 1 0 .0 0 .8 5 1 0 .0 1 .4 0 1 0 .0 2 .6 9 7 .6 0 .5 9 1 0 .0 2 .5 6 6 .8 6 .4 5 4 .5
225 0 .0 7 1 1 .3 0 .2 3 1 1 .3 0 .5 1 1 1 .3 0 .6 6 1 1 .3 1 .0 9 1 1 .3 2 .3 9 9 .6 0 .4 6 1 1 .3 2 .2 7 8 .6 5 .7 2 5 .7
275 0 .0 5 1 2 .5 0 .1 8 1 2 .5 0 .4 0 1 2 .5 0 .5 2 1 2 .5 0 .8 7 1 2 .5 2 .1 4 1 1 .9 0 .3 6 1 2 .5 2 .0 3 1 0 .6 5 .1 3 7 .0
300 0 .0 4 1 3 .8 0 .1 4 1 3 .8 0 .3 2 1 3 .8 0 .4 2 1 3 .8 0 .7 1 1 3 .8 1 .8 4 1 3 .8 0 .2 8 1 3 .8 1 .8 4 1 2 .8 4 .6 5 8 .5
page 46
Hilti System MQ channel installation
System MQ
and Technical
PC Software
Information
Type of load: uniform Type of load 2: single Type of load 3 Type of load 4 Type of load 5
F1 F1 F2 F2 F3 F3 F3
F1 = q · i 1/
2
1/
2 1/
3
1/
3
1/
3
1/ 1/ 1/ 1/
4 4 4 4
Medium duty
System MM
Light duty
MQK-21/450 450 500 500 500 700 700 700 180 180 180 310 310 310 190 190 190
MQK-41/300 300 2950 2950 1460 2950 2950 1460 1480 1480 730 1470 1470 730 980 980 480
MQK-41/450 450 1960 1960 970 1960 1960 970 980 980 480 980 980 480 650 650 320
MQK-41/600 600 1470 1470 720 1470 1470 720 620 620 360 730 730 360 490 490 240
MQK-41/1000 1000 580 580 420 840 840 420 210 210 210 360 360 210 220 220 140
MQK-41/3/300 300 4070 3320 1460 4070 3320 1460 2040 1660 730 2030 1660 730 1350 1100 480
MQK-41/3/450 450 2710 2200 970 2710 2200 970 1350 1100 480 1350 1100 480 900 730 320
Medium duty
System MQ
MQK-41/3/600 600 2020 1640 720 2020 1640 720 810 810 360 1010 820 360 670 540 240
MQK-41/600/4 600 1470 1470 1470 1470 1470 1470 620 620 620 730 730 730 490 490 490
MQK-41/1000/4 1000 580 580 580 840 840 840 210 210 210 360 360 360 220 220 220
MQK-72/450 450 6040 3180 1370 6040 3180 1370 3020 1590 680 3020 1590 680 2010 1060 450
MQK-72/600 600 4520 2380 1020 4520 2380 1020 2260 1190 510 2260 1190 510 1500 790 340
MQK-21 D/300 300 3010 3010 1460 3010 3010 1460 1510 1510 730 1500 1500 730 1000 1000 480
MQK-21 D/450 450 2000 2000 970 2000 2000 970 1000 1000 480 1000 1000 480 660 660 320
Medium duty
F1 = q · I
System MQ
1/2 1/ 1/3 1/3 1/3 1/4 1/4 1/4 1/4
2
HDG
Bracket F1 [N] 1) F1 [N] 1) F1 [N] 1) F2 [N] 1) F3 [N] 1)
L (mm) Brace 5) Bracket 4) HUS 12,5 3) Bracket 4) HUS 12,5 3) Bracket 4) HUS 12,5 3) Bracket 4) HUS 12,5 3) Bracket 4) HUS 12,5 3)
MQK-21/450 450 short 5460 5460 1410 1410 520 520 2440 2440 2130 2030
MQK-41/450 450 short 6390 6110 3960 3960 2750 2750 3190 3050 2130 2030
Stainless Steel
Medium duty
MQK-41/600 600 long 5690 5690 2960 2960 2840 2840 2840 2840 1890 1890
System MQ
MQK-41/1000 1000 long 2250 2250 3400 3400 430 430 1700 1700 1130 1130
MQK-41/3/450 450 short 6380 6110 5450 5450 3190 2960 3190 3050 2120 2030
MQK-41/3/600 600 long 5680 5680 4080 4080 2840 2840 2840 2840 1890 1890
MQK-41/600/4 600 long 5690 5690 2960 2960 2840 2840 2840 2840 1890 1890
MQK-41/1000/4 1000 long 2250 2250 3400 3400 430 430 1700 1700 1130 1130
MQK-72/450 450 short 6380 6100 6380 6100 3190 2960 3190 3050 2120 2030
MQK-72/600 600 long 5680 5680 5680 5680 2840 2840 2840 2840 1890 1890
System MI
MQK-21 D/450 450 short 6380 6110 4040 4040 2810 2810 3190 3050 2120 2030
HDG
MQK-21 D/600 600 long 5680 5680 3030 3030 2840 2840 2840 2840 1890 1890
MQK-21 D/1000 1000 long 3380 3380 3380 3380 1690 1690 1690 1690 1120 1120
1)
Loading capacity of bracket (steel loading capacity) or with HVZ M12 fastening, the loading capacity of the bracket is reached with the HVZ M12.
2)
Loading capacity of bracket fastened with HST M12.
3)
Loading capacity of bracket fastened with HUS H 12.5 or with HST M10 (bending figures for HST M10 taken into account)
4)
Loading capacity of bracket (steel loading capacity) or with HVZ M12 or HST M12 fastening (loading capacity of the bracket is reached with HVZM12/HSTM12)
Fixed points
System MQ
and sliders
5)
Short angle brace: MQK-SK / long angle brace: MQK-SL
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
System MQ
HVZ adhesive anchor M12 (Hole dia. 14 mm) HST stud anchor M12 (Hole dia. 12 mm) HUS-H screw anchor 12,5 (Hole dia. 10 mm)
Firestop systems
page 4 page 47
System MQ
and Technical
PC Software
Information
Medium duty
System MM
Light duty
Medium duty
System MQ
to approx 20 microns
100 100
2 2
20.6 63x13.5
63x13.5
31
Hilti Pipe Rings
22.3
System MQ
41.3
Channels and firestop tested
System MQ
22.3
7.5
41.3
75
System MI
75
HDG
41.2
40x13.5
75
2.5
124
2.75 40x13.5
Airconditioning
and Ventilation
System MQ
22.3
7.5
41.3
124 3
page 48
System MQ
Anchor channel
and Technical
HAC-30
PC Software
Information
The toothed channel designed to fit Hilti installtion systems
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn Installation of building services in the basement backbone HAC-30
nn Installation of heating, ventilation, A/C, water and other building
Base materials Concrete
services in the building backbones per level
nn Installation of building services in risers Surface Finish Hot dip galvanized 55 µm
For use with HBC-B T-head bolts, Hilti MQ41
Medium duty
nn Increased installation speed for building services vs. traditional
System MQ
anchor fastening
HDG
nn Dust-free and noiseless fastening method
nn Flexibility of use throughout whole building lifecycle
Stainless Steel
Medium duty
System MQ
9 :
Length - L Width - B Height - H Effective embedment Number of Anchor Order designation Sales Item Number
depth anchors distance Quantity
System MI
550 mm 42 mm 26 mm 68 mm 3 250 mm Anchor channel HAC-30 68/550 F 1 PC 00431892
HDG
800 mm 42 mm 26 mm 68 mm 4 250 mm Anchor channel HAC-30 68/800 F 1 PC 00431893
1050 mm 42 mm 26 mm 68 mm 5 250 mm Anchor channel HAC-30 68/1050 F 1 PC 00431894
1300 mm 42 mm 26 mm 68 mm 6 250 mm Anchor channel HAC-30 68/1300 F 1 PC 02026152
1550 mm 42 mm 26 mm 68 mm 7 250 mm Anchor channel HAC-30 68/1550 F 1 PC 02025327
Fixed points
and sliders
Firestop systems
page 49
System MQ
page 50
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti System MQ channel System MQ
installation
Channel nut
and Technical
PC Software
Information
Features
■ Simple, compact, time saving
■ Single part
■ Easy to use
■ Universal: one and the same nut for all channels
■ Simple removal
Medium duty
System MM
Light duty
Technical data
Galvanising: galvanised, Fe/Zn 13 B
Medium duty
as per DIN 50961
System MQ
Pushbutton
Bolt: M10 material 8.8 as per DIN/ISO898
Width across flats: 17 mm
Medium duty
System MQ
Zrec (kN) Qrec (kN) MD (Nm)
Item Channel I Channel II
HDG
MQN 5.0 8.0 5.0 1) 40
Channel I: MQ-21. MQ-31, MQ-41, MQ-21D, MQ-41D
Channel II: MQ-41/3, MQ-52, MQ-72, MQ-52-72D, MQ-124XD IBMB no. 3897/1802-5
1)
Shear loading applies to single fastening. Qrec (kN) 9.0 for two fastenings
Stainless Steel
1 2 3
Medium duty
System MQ
System MI
HDG
Put in position. Press and turn. Tighten.
Wing nut ➀ M6
M8
Fixed points
System MQ
and sliders
➀
System MQ
page
page51
7
System MQ
page 52
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti System MQ channel installation System MQ
and Technical
PC Software
Information
Features
Universal: few parts for all applications 19.4 19
Easy to use
Three-dimensional, thus high strength
35 10
Medium duty
System MM
Light duty
Technical data
Material: S 235 J R as per DIN EN 10 025
Material thickness 4 mm
Galvanising: galvanised, Fe/Zn 13 B
Medium duty
as per DIN 50961
System MQ
MQW-Q2 pre-assembled 90° angle
56
Features
Technical data
Tightening torque: 40 Nm
Material thickness: 3 mm
Medium duty
Bolt: M10 material 8.8 as per DIN/ISO 898
System MQ
Frec 4.0 kN Frec 3.0 kN
Width across flats: 17 mm
HDG
Weight each Packaging ) Ordering Item no.
(g) contents (pcs) designation
90° angle 200 20 MQW-Q2 369655
Stainless Steel
Medium duty
1 2
System MQ
System MI
HDG
Pres s and turn. Tighten. Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 10
page 53
System MQ Hilti System MQ channel installation
System MM
105
Medium duty
System MQ
61
111
Hilti Pipe Rings
➃ 46
Medium duty
System MQ
46
HDG
45 º angle ➀
Frec 9.0 kN Frec 5.0 kN
105
Stainless Steel
Medium duty
System MQ
45°
Weight each Packaging Ordering Item no.
(g) contents (pcs) designation
Angle, 8 hole, 45° 410 10 ➀ MQW-8/45° 369660
Angle, 3 hole, 45° 155 20 ➁ MQW-3/45° 369657
Angle, 2 hole, 45°, inner 354 10 ➂ MQW-2/45° 369662
➁
Frec 7.0 kN Frec 2.5 kN
106
System MI
45°
HDG
56
➂
Fixed points
System MQ
and sliders
100
Frec 3.0 kN Frec 1.1 kN
45°
100
Airconditioning
and Ventilation
System MQ
135 º angle
Frec 4.5 kN Frec 3.0 kN
85
Weight each Packaging Ordering Item no. 45°
(g) contents (pcs) designation
Angle, 3 hole, 135° 210 10 MQW-3/135° 369663
Firestop systems
55
page 54 page 11
page 55
System MQ
page 56
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti System MQ channel installation System MQ
and Technical
PC Software
Information
Features
Reliable and easy to use 19.4 19
Medium duty
System MM
Light duty
Technical data
M at er i al : S 2 3 5 JR as p er DI N EN 10 0 2 5
Galvanising: galvanised Fe/Zn 13 B
as per DIN 50961
Separate design verification of the fastening on the base material must
be provided.
Medium duty
System MQ
Base material connector 167
112
Frec 9.0 kN
Su i t ab l e f o r W ei g h t each Packag i n g Or d er i n g I t em n o .
Medium duty
System MQ
I t em ( k N) ( B) ( A) M D (Nm)
MQV-2/2D-14 7.8 MQ-41 Double MQN 40
HDG
18x12
59
61 80
118
61 40
Stainless Steel
Medium duty
System MQ
60 52 32
5
11,5 x 30
44
54
59
11.5 34
System MI
HDG
Base material connector 45 º
Fo r W ei g h t each Packag i n g Or d er i n g I t em n o . Frec 7.0 kN Frec 5.0 kN
ch an n el ( g) co n t en t s ( p cs) d esi g n at i o n
MQ-21, MQ-31, MQ-41, MQ-41/3 350 10 MQP-45° 369649 105
Fixed points
System MQ
and sliders
45° 40x40x4
14
41 42
Airconditioning
and Ventilation
System MQ
Firestop systems
page 14 page 57
System MQ Hilti System
Hilti System MQ
MQ channel
channel installation
installation
Channel base ➀
A
A
and Technical
PC Software
Information
105
105
Suitable for Weight each Packaging Ordering no.
Item no.
channel (g) contents (pcs) designation
20x14
20x14
➁
Frec Bolt Pushbutton Tightening torque, AA AA
Item (kN) (A) MDD (Nm)
Medium duty
System MM
Light duty
106
106
20x14
20x14
FFrec
rec
88
200
200
250
250
100
IBMB no. 3897/1802-5
100
Pivot base
Hilti Pipe Rings
MQP-G
System MQ
HDG
215
215
Item Frec (1) (kN) Bolt Push- Tightening torque MQN Tightening torque M12
M12 FFrec
rec (2)
(2)
button MD (Nm) clamping bolts MDD (Nm)
(Nm)
MQP-FG 8 kN Double MQN 40 80
129
129
System MI
90
90
Load Frec (2) [kN] M12
M12
HDG
2.50 44
44
20x13.5
20x13.5
44 120
120
2.00 59
59 180
180
Fixed points
System MQ
and sliders
1.50
1,00
Airconditioning
and Ventilation
System MQ
0.50
0.00
0.00
00 50
50 100
100 150
150 200
200 250
250 300
300 350
350 400
400
Firestop systems
Distance
Distance to
to the
the pivot
pivot point:
point: aa [mm]
[mm]
page 58 page
page 15
15
Hilti System MQ channel
channel installation
installation System MQ
Beam clamp
and Technical
PC Software
Information
Features
■ For connecting installation
installation channels
channels to
to steel
steelbeams
beamswithout
withoutdrilling
drilling
or welding
■ The clamp set fits all standard
standard T-beams
T-beams
Medium duty
System MM
Light duty
Technical data
Material:
U-bolt: SS 235
235 JRG-2
JRG-2as
asper
perDIN
DINEN
EN10025
10025
Claw plate: SS 235
235 JR
JRas
asper
perDIN
DINEN
EN10025
10025
Nut: as
as per
per DIN
DIN934
9348-A2K
8-A2K
Galvanising:
Galvanising: galvanised
galvanisedFe/ZN
Fe/ZN1313BB
Medium duty
as
as per
per DIN
DIN50961
System MQ
50961
Beam clamp ➀
➀
➀ ➁
➁➁
M8
M8 M10
M10
M8 M10
Suitable for
Suitable for Weight
Weighteach
Weight each
each Packaging
Packaging
Packaging Ordering
Ordering
Ordering Item
Itemno.
Item no.
no.
MQ-41D, MQ-52-72D,
MQ-41D, MQ-52-72D, MQ-124X
MQ-124X DD 860
860 10
10 ➂ MQT-82-124
➂ MQT-82-124 369677
369677
369677
Medium duty
MQT-21-41 10 3.0
System MQ
92 88
MQT-41-82 20 4.5
92
92 8
MQT-41-82 20 4.5
HDG
85
85
85
MQT-82-124
MQT-82-124 30
30 5.0
5.0 178
Always use beam clamps in pairs.
178
178
Always use beam clamps in pairs.
Channel loading
Channel loading values
values must
must be
be allowed
allowed for.
for.
Stainless Steel
Medium duty
System MQ
Beam Clamp
Beam Clamp
Advantages
Advantages
■ For connecting installation channels to steel beams without drilling
■ For connecting installation channels to steel beams without drilling
or welding
or welding
■ The beam clamp fits all standard T-beams
■ The beam clamp fits all standard T-beams
(flange thickness ≤ 30 mm)
System MI
(flange thickness ≤ 30 mm)
■ Massive design
HDG
■ Massive design
■ Shear loading possible
■ Shear loading possible
Technical Data
Technical Data
Material clamb: EN-GJMB-350-10 (DIN EN 1562)
Material clamb: EN-GJMB-350-10 (DIN EN 1562)
Material screw: M12 steel 8,8-A2K (DIN 933)
Fixed points
System MQ
M12x50
M12x50
For
For channel
channel Weight/pc.
Weight/pc. Packaging
Packaging Ordering
Ordering Item
Item no.
no.
System MQ
M12x50
For channel Weight/pc.
(kg)
(kg) Packaging
(pcs)
(pcs) Ordering
designation
designation Item no.
(kg) (pcs) designation
MQ-21D, MQ-41, MQ-41/3 0.716 16 MQT 41 286107
286107 FFy
y
104.6
104.6
MQ-21D, MQ-41, MQ-41/3 0.716 16 MQT 41 286107 Fy
104.6
item
item Max.
Max. rec.
rec. load
load per
per pair
pair Thightening
Thightening torque
torque
item Fz
Fz (kN)
Max. rec. load perFx
(kN) (kN)
pair
Fx (kN) M
M DD (Nm)
Thightening
(Nm) torque
Fz (kN) Fx (kN) M D (Nm)
MQT41 20 9 20 FFx
MQT41 20 9 20
Firestop systems
52
52
x
Always use beam clamps in pairs. Channel loading values must be respected. Fx 52
Always use beam
Load values do notclamps in pairs.
apply on Channel
cantilever loading
channel values must be respected.
endings. FFz
z
Load values do not apply on cantilever channel endings. Fz
page
page 16
16
page 59
page 16
System MQ Hilti System
Hilti SystemMQ
MQchannel
channelinstallation
installation
galvanised, 5 µm
Information
Features
■ Installation on steel beams without drilling or welding.
■ Through hole «Y» without thread.
■ Height adjustment possible, especially after fitting by loosening
loosening
the locknuts.
Medium duty
System MM
Light duty
Technical data
VdS: Above pipe size DN 65,
retaining straps are required !
Medium duty
System MQ
VdS
VdS R
R
FM
FM
Factory
FactoryMutual
Mutual
Hilti Pipe Rings
Size
Size Approval
Approval Dimensions
Dimensions [mm]
[mm] Packaging
Packaging Outside
Outsidepackaging
packaging Ordering
Ordering Item
Itemno.
no.
TT U
U VV W
W XX YY ZZ contents
contents contents
contents designation
designation
M8
M8 VdS
VdS 34.5
34.5 36.1
36.1 18.5
18.5 18
18 20.9
20.9 99 M8
M8 12
12 192
192 ➀
➀ MAB-9
MAB-9 375956
375956
M10
M10 VdS/FM/UL
VdS/FM/UL 41
41 41.8
41.8 21
21 19.5
19.5 23.4
23.4 11
11 M10
M10 12
12 96
96 ➀
➀ MAB-11
MAB-11 375957
375957
M12
M12 VdS/FM/UL
VdS/FM/UL 48
48 54
54 23.5
23.5 26
26 35
35 13
13 M10
M10 12
12 96
96 ➁
➁ MAB-13
MAB-13 375958
375958
M16
M16 VdS/FM/UL
VdS/FM/UL 55.5
55.5 58
58 29.5
29.5 28.5
28.5 30
30 17
17 M12
M12 12
12 48
48 ➁
➁ MAB-17
MAB-17 228155
228155
➀ ➁
Medium duty
➀B ➁
System MQ
AA YY AA YY
B BB
ZZ
HDG
TT ZZ TT
W W
W W
V V
V V
X U U
X U X U
X
Stainless Steel
Medium duty
System MQ
MAB-13 > 100 ≤ 150 > 100 ≤ 200 2001) 3500 216 wrench
wrench wrench
wrench
MAB-17 >> 150
150 ≤
≤ 200 >> 200 ≤ 300
200 ≤ 300 >> 200200 ≤≤ 300 5500 318
HDG
VdS
VdS and
and UL
UL application
application overview FM
FMapplication
applicationoverview
Fixed points
System MQ
and sliders
overview overview
Straight flange
Straight flange Inclined
Inclined flange
flange Straight
Straightflange
flange Inclined
Inclinedflange
flange
1)
1)
Airconditioning
and Ventilation
System MQ
1) 1)
1) 1)
page 17
page 60 page 17
Frec. Frec.
Retaining joint
Universal straps for beam clamps
MQP-U
and Technical
PC Software
Information
glavanised, 5 µm
Features:
For clamp Approval Dimensions [mm] Packaging Outside packaging Ordering Item no.
■ Universal fastening on inclined
L components.
B l1 l2 d1 d2 contents (pcs) contents designation
MAB-11/-13 VdS 350 25 14.8 19
■ Direct connection on the building structure and on installation 10.5 12.5 12 120 MAB-S 11/ 13 374409
MAB-17 VdS 400 40 14.5 22 12.5 17 12 48 MAB-S 17 228156
channels, especially suitable for bracings.
■ Angle stepless fixable up to 90°. l2
Installation instruction: retaining strap
Medium duty
■ Easy handling and height adjustment of the threaded rod.
System MM
3
Light duty
L
d2
Technical data:
Material: S235 JRG-2 as per DIN EN 10025 l1
Material thickness: 5 mm d1
B
Galvanising: galvanised, Fe / Zn 13 B
as per DIN 50961
Medium duty
System MQ
Separate design verification
F of the fastening on the base
rec. Frec. material or other
Universal
Universal joint
joint MQP-U
MQP-U
Medium duty
System MQ
ItemEasy handling and height adjustment
■ of the threaded rod.
Max. rec. load Tightening torque MD
(kN) (Nm)
HDG
MQP-U M12 14 20
Technical
MQP-U M16 data: 14 20
Material: S235 JRG-2 as per DIN EN 10025
Material thickness: 5 mm
Technical data for fastening the MQP-U
Galvanising: universal
galvanised, Fe joint
/ Zn 13 to BMQ channels
Stainless Steel
Medium duty
as per DIN 50961
System MQ
Separate
Angle design verification of the fastening
Max. recommended load Frec (kN)on the Tightening
base material
torque or other FF
empf
rec
Channel I Channel II MD (Nm)
installation components must be provided.
90° 5.0 8.0 20 Winkel
variable
60° 4.0 8.0 20 variabel
angle
30° 3.0 5.0 20
0° 3.0 5.0 20
Universal joint MQP-U
Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D
System MI
Channel II: MQ-41/3, MQ-52, MQ-72, MQ-52-72 D, MQ-124XD
HDG
Interim valuesD1of the angleD2can be interpolated
Size Weight
linearly.
Packaging Ordering Item no.
(mm) (mm) each (g) contents (pcs) designation
M12 12.5 12.5 390 10 MQP-U M12 284248
page 18
M16 16.5 16.5 390 10 MQP-U M16 284249
Fixed points
System MQ
and sliders
0° 3.0 5.0 20
Channel I: MQ-21, MQ-31, MQ-41, MQ-21D, MQ-41D
Channel II: MQ-41/3, MQ-52, MQ-72, MQ-52-72 D, MQ-124XD
Interim values of the angle can be interpolated linearly.
page 18
page 61
System MQ Hilti System
Hilti System MQ
MQ channel
channel installation
installation
Features:
■ For connecting installation channels to steel beams without drilling
or welding.
■ The clamp set fits all standard T-beams
(max. clamping thickness ≤ 36 mm).
Technical data:
Medium duty
System MM
Light duty
Material: GJMW400-5
Galvanising: galvanised Fe/Zn 13 B
as per DIN 50961
Delivery without wing nut, nut, boss plate, washer and bolt.
Medium duty
System MQ
(mm) each
each contents
contents designation
designation
B T A G (g)
(g) (pcs)
(pcs)
M10 52 68 30 23×11 160 20 MQT-M10
MQT-M10 284242
284242 BB
TT
M12 52 74 32 29×13 190 20 MQT-M12
MQT-M12 284243
284243
M16 52 75 36 32×17 215 10 MQT-M16
MQT-M16 284244
284244
Application case
Suitable for: MQ-21, MQ-31, MQ-41, MQ-41/3, MQ-52, MQ-72, MQ-21D, MQ-41D,
MQ-41D, MQ-52-72D
MQ-52-72D
Medium duty
System MQ
HDG
Application case
Suitable for: MQ-21, MQ-31, MQ-41, MQ-41/3, MQ-52, MQ-72, MQ-21D, MQ-41D,
MQ-41D, MQ-52-72D,
MQ-52-72D,
System MI
MQ-124XD
HDG
Item
Item Rec.
Rec. tensile
tensile load
load (kN)
(kN) Tightening
Tightening torque
torque Necessary
Necessary bolt
bolt length
length
Channel
Channel II Channel
Channel IIII M
MDD (Nm)
(Nm) LL (mm)
(mm)
MQT-M10 10.0 10.0 40
LL == 41
41++ 0.6
0.6 xx DD
MQT-M12 10.0 15.0 40 DD
Application case
Application case
Airconditioning
and Ventilation
System MQ
Suitable
Suitable for: Connection
for: Connection of
of steel-plates
steel-plates
Item
Item Rec.
Rec. tensile
tensile load
load (kN)
(kN) Tightening
Tightening torque
torque Necessary
Necessary bolt
bolt length
length
M
MDD (Nm)
(Nm) LL (mm)
(mm)
MQT-M10
MQT-M10 10.0
10.0 50
50
MQT-M12
MQT-M12 15.0
15.0 80
80 LL == 60
60 mm
mm ++ DD ++ PP
MQT-M16 20.0 120
Firestop systems
page
page 19
page 62 19
System MQ
Hilti System MQ channel
channel installation
installation System MQ
clamp MQT-G
Swivel beam clamp MQT-G
and Technical
PC Software
galvanised, 13 µm
Information
M
MMDDD
TTT
Features
■ Installation on steel beams
beams without
without drilling
drilling or
or welding,
welding,also
also
on inclined steel beams.
beams.
■ No bending of threaded
threaded rods.
rods.
Medium duty
System MM
W
WW111
Light duty
■ The clamp set fits all standard UUU
standard T-beams
T-beams (max.
(max. clamping
clamping
thickness ≤ 17 mm). W
WW222
XXX
Technical data
VdS: Above
Above pipe
pipe size
size DN
DN 65,
65,retaining
retainingstraps
strapsare
are
required!
required! GGG
Medium duty
System MQ
VdS: For
For the
the applications
applications 111 and
and 444 retaining
retainingstraps
straps FFrec
Frec
rec
are
are required!
required!
For
ForVdS-approved
VdS-approved
VdS-approved
FM
FM
Item FFrec
rec (kN) FFrec
rec(kN) Thightening
Thighteningtorque
FM
(kN) (kN) Thightening torque
torque
VdS
rec rec
VdS
(≤
(≤25°)
25°) (>
(>25°)25°) MDDD(Nm)
M
M (Nm)
(Nm) installation
installationsee
installation see
see
MQT-G M8: 2,5 1,5
1,5 18
18 www.hilti.com/
www.hilti.com/
www.hilti.com/
Size
Size Approval
Approval Dimensions
Dimensions [mm]
[mm] Weight
Weight
Weight Packaging
Packaging
Packaging Outside
Outsidepackaging
Outside packaging
packaging Ordering
Ordering
Ordering Item
Itemno.
Item no.
no.
TT UU W1
W1
W1 W2
W2
W2 XXX each
each(g)
each (g)
(g) contents
contents(pcs)
contents (pcs)
(pcs) contents
contents(pcs)
contents (pcs)
(pcs) designation
designation
designation
Medium duty
M8 VdS 53 58 17 55 27 266
266 20
20 40
40 MQT-G
MQT-GM8
M8 284238
System MQ
53 58 17 55 27 266 20 40 MQT-G M8 284238
284238
M10 VdS / FM 53
53 58
58 17
17 55
55 27
27 266
266
266 20
20
20 40
40
40 MQT-G
MQT-GM10
MQT-G M10 284239
M10 284239
284239
HDG
Retaining strap for
for swivel
swivel beam
beam clamp
clamp
MQT-G
Stainless Steel
Medium duty
System MQ
For
For swivel
swivel beam
beam clamp
clamp Dimensions
Dimensions [mm]
[mm] Packaging
Packaging
Packaging Ordering
Ordering
Ordering Item
Itemno.
Item no.
no.
Lenght
Lenght Width
Width Thickness
Thickness
Thickness contents
contents(pcs)
contents (pcs)
(pcs) designation
designation
designation
MQT-G
MQT-G M8,
M8, MQT-G
MQT-G M10
M10 305
305 40
40 33 10
10 MQT-S
MQT-S
MQT-S 284863
284863
284863
VdS
VdS and
and FM
FM approved
approved applications
applications Non-VdS
Non-VdSand
Non-VdS andFM
and FMapproved
FM approvedapplications
approved applications
applications
System MI
HDG
11 22 33 444 555 666 777
90°
90°
90°
Fixed points
System MQ
and sliders
≥≥25° Max.
Max. 45°
≥≥ 25° ≥25°
25°
≥≥25°
≥25° Max. 45° Max.45°
45°
≥ 25°
25° 25° Max.
Max.45°
45°
Installation
Installation instruction:
instruction: swivel
swivel beam
beam clamp
clamp Installation
Installationinstruction:
Installation instruction:retaining
instruction: retainingstrap
retaining strap
strap
Airconditioning
and Ventilation
System MQ
Firestop systems
page 20 page 63
page
page 20
20
System MQ Hilti System MQ channel installation
Features:
■ For connecting installation channels to steel beams without drilling
or welding.
■ The clamp set fits all standard double T-beams and U-beams.
■ Easy installation of pipes on steel beams.
Medium duty
System MM
Light duty
Technical data:
Material: S235 JRG-2 as per DIN EN 10025
Material thickness: 5 mm
Galvanising: galvanised, Fe/Zn 13 B
as per DIN 50961
Medium duty
System MQ
Item Tightening torque For beam flange widths Cut length L of the
MD (Nm) B (mm) channel section (mm)
MQT-K 30 100 to 400 mm L = B – 25 mm
Medium duty
System MQ
HDG
3.50
3.00
2.50
System MI
HDG
2.00
1.50
a
Fixed points
System MQ
and sliders
1.00
0.50
Airconditioning
and Ventilation
System MQ
rec
0.00
0 50 100 150 200 250 300 350 400
Distance a [mm]
The design of the clamped channel and the steel beam must be separately verified.
The permissible bending moment of the threaded rod must be noted.
Firestop systems
page 64 page 21
page 65
System MQ
3D system
and Technical
PC Software
Information
Features
■ Universal: few parts for all applications
■ For installation of angles or connectors on site 19.4 19
Technical data
Medium duty
System MM
Light duty
Tigthening torque: 40 Nm
3D system ➀ 90
Supported at both ends
Hilti Pipe Rings
Description Weight each Packaging contents Ordering Item no. Frec = 2.5 kN
(g) (pcs) designation
Basic unit 206 20 ➀ MQ3D-B 369694
90° angle 212 20 ➁ MQ3D-W90° 369695 Frec ≤ Qrec MQN
with MQ3D-B
45° angle 153 16 ➂ MQ3D-W45° 369696
Brace 95 20 ➃ MQ3D-A 369697 21.5
Tension/compression bracing
➁
61 Frec = 2.5 kN
Example of application
Medium duty
System MQ
Variable angle
ds
en
th
bo
HDG
at
Frec ≤ Qrec MQN
d
te
or
pp
with MQ3D-B
Su
26
Directly on channel
Stainless Steel
45°
30
System MI
Tension bracing
HDG
➃ Frec = 2.5 kN
25 Directly on channel
Frec ≤ Qrec MQM-M10
fastened to channel with
MQZ-L11 boss plate
M10x20-8.8 hex. screw Frec = 2.5 kN
MQM-M10 wing nut
Variable angle
Airconditioning
and Ventilation
System MQ
Note
The preassembled fastening screw must be replaced
with a longer 8.8 grade M10 screw when the con-
necting parts (MQ3D-W90°, MQ3D-W45°, MQ3D-
A) are fitted without other parts from the 3D system.
Firestop systems
page 66 page 25
System MQ
Angle
and Technical
MP-MQE-W
PC Software
Information
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn 90° connection of MQ channels
MP-MQE-W
nn Universal: few parts for a wide range of applications
Material composition S235JR as per DIN EN 10025
nn Medium-duty load range
Surface Finish Galvanized
Medium duty
System MQ
1 2
)UHF N1 )UHF N1
HDG
Stainless Steel
Medium duty
System MQ
3
)UHF N1 )UHF N1
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
Order designation Weight Thickness Tightening torque Sales Quantity Item Number
System MQ
page 67
System MQ
Rail support
and Technical
MP-MQE-P
PC Software
Information
Medium duty
System MM
Light duty
MP-MQE-P
nn Medium- to heavy-duty load range
Material composition S235JR as per DIN EN 10025
Surface Finish Galvanized
Advantages
Additional product information Use with 2pc. wing nuts MQM-
nn Reliable and easy to use M10 and 2pc. bolts M10x25
nn Quick installation without welding grade 8.8
Hilti Pipe Rings
nn Pre-galvanized
$
Medium duty
System MQ
HDG
[
Stainless Steel
)UHF
N1
Medium duty
System MQ
Order designation Weight Thickness Tightening torque Sales Quantity Item Number
System MQ
Firestop systems
page 68
System MQ
Hilti System MQ channel installation
and Technical
PC Software
Information
Applications
■ Elevator door fastening support
Advantages
■ Easy, secure attachment of installation channels with pushbuttons
Medium duty
■ Quick installation of the wall base on any base material
System MM
Light duty
■ Elongated holes for flexible positioning to avoid rebar hits
■ Various channel lengths for great versatility
■ Flexible position of the wall base
Technical data
Medium duty
System MQ
Material: S235JR according to DIN EN 10025
Galvanizing: galvanized, Fe/Zn 13B as per DIN 50 961
62
Medium duty
1642 mm (max. ; case 2)
System MQ
HDG
Loading scenario
Type of load recommended load F recommended load F
Channel MQ-21D
for L = 1642 mm for L = 1442 mm
F
Channel position
0.90 kN 1.18 kN L
Stainless Steel
Medium duty
System MQ
F F
0.52 kN 0.69 kN
F F F
0.39 kN 0.49 kN
F 1.05 m F
System MI
q
HDG
0.88 kN/m 1.31 kN/m
* limitation by strain; all other loads limited by deflection L/200
Loading scenario
Type of load recommended load F recommended load F
Channel MQ-21D
for L = 1642 mm for L = 1442 mm
Fixed points
System MQ
and sliders
F
Channel position
1.61 kN 2.10 kN L
F F
0.94 kN 1.23 kN
F F F
Airconditioning
and Ventilation
0.67 kN 0.88 kN
System MQ
F 1.05 m F
1.55 kN 2.64 kN
q
page 69
System MQ
Threaded rod
and Technical
PC Software
Information
Technical data
System MM
Light duty
Ordering
Thread diameter Length Order designation Sales Quantity Item Number
Flat washer
Medium duty
System MQ
Technical data
HDG
Ordering
Inside diameter Outside Thickness Additional product information Order designation Sales Quantity Item Number
diameter
6.4 mm 12 mm 1.6 mm According DIN 125 / Form A Flat washer A 6,4/12 zinced 500 pc 00282849
System MI
8.4 mm 16 mm 1.6 mm According DIN 125 / Form A Flat washer A 8,4/16 zinced 200 pc 00282850
HDG
10.5 mm 20 mm 2 mm According DIN 125 / Form A Flat washer A 10,5/20 zinced 100 pc 00282851
13 mm 24 mm 2.5 mm According DIN 125 / Form A Flat washer A 13/24 zinced 100 pc 00282852
17 mm 30 mm 3 mm According DIN 125 / Form A Flat washer A 17/30 zinced 100 pc 00282853
21 mm 37 mm 3 mm According DIN 125 / Form A Flat washer A 21/37 zinced 50 pc 00282854
Fixed points
System MQ
and sliders
System MQ
6.4 mm 28 mm 2 mm Similar to DIN 125 / Form A Flat washer A 6,4/28 zinced 200 pc 00282860
8.4 mm 28 mm 2 mm Similar to DIN 125 / Form A Flat washer A 8,4/28 zinced 200 pc 00282861
10.5 mm 28 mm 2 mm Similar to DIN 125 / Form A Flat washer A 10,5/28 zinced 100 pc 00282862
6.4 mm 18 mm 1.6 mm According DIN 9021 / Form A Flat washer A 6,4/18 zinced 200 pc 00409392
8.4 mm 24 mm 2 mm According DIN 9021 / Form A Flat washer A 8,4/24 zinced 100 pc 00409393
Firestop systems
10.5 mm 30 mm 2.5 mm According DIN 9021 / Form A Flat washer A 10,5/30 zinced 100 pc 00409394
13 mm 37 mm 3 mm According DIN 9021 / Form A Flat washer A 13/37 zinced 100 pc 00409395
17 mm 50 mm 3 mm According DIN 9021 / Form A Flat washer A 17/50 zinced 50 pc 00409396
22 mm 60 mm 4 mm According DIN 9021 / Form A Flat washer A 22/60 zinced 50 pc 00409398
page 70
System MQ
Hexagon screw
and Technical
PC Software
Information
Technical data
Medium duty
Additional product information According DIN 933
System MM
Light duty
Ordering
Thread diameter Thread length Wrench size Order designation Sales Quantity Item Number
Medium duty
System MQ
M8 16 mm 13 mm Hexagon screw M8x16 zinced 100 pc 00216446
M8 20 mm 13 mm Hexagon screw M8x20 zinced 100 pc 00216447
M8 25 mm 13 mm Hexagon screw M8x25 zinced 100 pc 00216448
M8 35 mm 13 mm Hexagon screw M8x35 zinced 100 pc 00216449
M10 20 mm 17 mm Hexagon screw M10x20 zinced 100 pc 00216453
Medium duty
System MQ
M12 40 mm 19 mm Hexagon screw M12x40 zinced 50 pc 00047398
HDG
M12 50 mm 19 mm Hexagon screw M12x50 zinced 50 pc 00084618
M16 30 mm 24 mm Hexagon screw M16x30 zinced 50 pc 00216461
M16 40 mm 24 mm Hexagon screw M16x40 zinced 50 pc 00047427
M16 50 mm 24 mm Hexagon screw M16x50 zinced 50 pc 00084718
Stainless Steel
Medium duty
M16 70 mm 24 mm Hexagon screw M16x70 zinced 50 pc 00387994
System MQ
M20 40 mm 30 mm Hexagon screw M20x40 zinced 50 pc 00216462
Hexagon nut
Technical data
System MI
HDG
Surface Finish Galvanized
Material composition Steel grade 8
Additional product information According DIN 934
Fixed points
System MQ
and sliders
Ordering
Thread diameter Wrench size Order designation Sales Quantity Item Number
page 71
System MQ
Technical data
Information
Ordering
Medium duty
System MM
Light duty
Threaded coupling
Technical data
Medium duty
Ordering
Thread diameter Length Wrench size Order designation Sales Quantity Item Number
Eye nut
Technical data
Fixed points
System MQ
and sliders
System MQ
Ordering
page 72
Pipe Rings System
Description Pages
page 75
Pipe Rings
MP-LHI M8
PC Software
Information
System MM
Light duty
Fields of Application
Medium duty
Technical data
System MQ
Ordering
Order designation Clamping Range Pipe size Distance Max. exten- Width - B Pipe Ring Pipe Ring Recommended Item Number
System MI
- D: Diameter (Imperial) center pipe sion from Cross Section Cross Section Static Load
to top - h center - b1 Width - b Thickness - s for Suspended
HDG
Installation Fzul
according RAL-GZ
655-B
9
Resid. pipe ring MP-LHI 8 - 12 mm 22 mm 27 mm 47 mm 20 mm 0.8 mm 200 N 02020538
8-12 M8 assy
Resid. pipe ring MP-LHI 12 - 16 mm 1/4 in 22 mm 27 mm 47 mm 20 mm 0.8 mm 400 N 02020539
Fixed points
System MQ
and sliders
12-16 M8 assy
Resid. pipe ring MP-LHI 16 - 20 mm 3/8 in 24 mm 28 mm 50 mm 20 mm 0.8 mm 400 N 02020730
16-20 M8 assy
Resid. pipe ring MP-LHI 20 - 25 mm 1/2 in 27 mm 30 mm 56 mm 20 mm 0.8 mm 400 N 02020731
20-25 M8 assy
Resid. pipe ring MP-LHI 25 - 31 mm 3/4 in 30 mm 34 mm 62 mm 20 mm 0.8 mm 400 N 02020732
Airconditioning
and Ventilation
25-31 M8 assy
System MQ
45-52 M8 assy
Resid. pipe ring MP-LHI 52 - 59 mm 45 mm 49 mm 92 mm 20 mm 1.2 mm 750 N 02020736
52-59 M8 assy
Resid. pipe ring MP-LHI 59 - 66 mm 2 in 49 mm 53 mm 100 mm 20 mm 1.2 mm 750 N 02020737
59-66 M8 assy
page 76
Pipe Rings
and Technical
MP-HI M8/M10
PC Software
Information
Pipe ring for installations in residential/apartment bulidings up to 6” pipe diameter with acoustic insulation.
Medium duty
System MM
Light duty
Medium duty
Fields of Application
System MQ
Technical data
nn Light duty pipe installation up to 6”
MP-HI M8/M10
nn Heating pipes
Temperature resistance -40°C - +110°C
nn Gas distribution pipes temperature range
nn Waste water distribution pipes Material composition DC01 steel as per DIN EN 10130
Medium duty
System MQ
Certificates Acoustic insulation DIN 4109 inspected,
Building material class B2, RAL-GZ 655/1
HDG
Stainless Steel
Medium duty
System MQ
Ordering
Order designation Clamping Range Pipe size Distance Width - B Material width and Recommended Static Item Num-
- D: Diameter (Imprial) center pipe thickness (b x s) Load for Suspended In- ber
to top - h stallation Fzul according
RAL-GZ 655-B
Resid. pipe ring MP-HI 8-12 M8/M10 assy 8 - 12 mm 30 mm 52 mm 20x1.0 mm 600 N 00386402
System MI
Resid. pipe ring MP-HI 12-16 M8/M10 assy 12 - 16 mm 1/4 in 30 mm 52 mm 20x1.0 mm 600 N 00386403
HDG
Resid. pipe ring MP-HI 16-20 M8/M10 assy 16 - 20 mm 3/8 in 32 mm 57 mm 20x1.0 mm 600 N 00386404
Resid. pipe ring MP-HI 20-25 M8/M10 assy 20 - 25 mm 1/2 in 35 mm 62 mm 20x1.0 mm 600 N 00386405
Resid. pipe ring MP-HI 25-31 M8/M10 assy 25 - 31 mm 3/4 in 38 mm 69 mm 20x1.0 mm 600 N 00386406
Resid. pipe ring MP-HI 31-38 M8/10 assy 31 - 38 mm 1 in 41 mm 76 mm 20x1.0 mm 600 N 00386407
Resid. pipe ring MP-HI 38-45 M8/M10 assy 38 - 45 mm 1-1/4 in 46 mm 86 mm 20x1.2 mm 750 N 00386408
Fixed points
System MQ
and sliders
Resid. pipe ring MP-HI 45-52 M8/M10 assy 45 - 52 mm 1-1/2 in 49 mm 93 mm 20x1.2 mm 750 N 00386409
Resid. pipe ring MP-HI 52-59 M8/M10 assy 52 - 59 mm 53 mm 100 mm 20x1.2 mm 750 N 00386410
Resid. pipe ring MP-HI 59-66 M8/M10 assy 59 - 66 mm 2 in 57 mm 108 mm 20x1.2 mm 750 N 00386411
Resid. pipe ring MP-HI 66-75 M8/M10 assy 66 - 75 mm 63 mm 128 mm 25x1.8 mm 1200 N 00386412
Resid. pipe ring MP-HI 75-84 M8/M10 assy 75 - 84 mm 2-1/2 in 67 mm 137 mm 25x1.8 mm 1200 N 00386413
Airconditioning
and Ventilation
System MQ
Resid. pipe ring MP-HI 84-93 M8/M10 assy 84 - 93 mm 3 in 72 mm 146 mm 25x1.8 mm 1200 N 00386414
Resid. pipe ring MP-HI93-101 M8/M10 assy 93 - 101 mm 76 mm 155 mm 25x1.8 mm 1200 N 00386415
Resid. pipe ring MP-HI101-110M8/M10 assy 101 - 110 mm 81 mm 164 mm 25x1.8 mm 1500 N 00386416
Resid. pipe ring MP-HI110-119M8/10 assy 110 - 119 mm 4 in 86 mm 175 mm 25x2.2 mm 1500 N 00386417
Resid. pipe ring MP-HI119-129M8/M10 assy 119 - 129 mm 91 mm 185 mm 25x2.2 mm 1500 N 00386418
Firestop systems
Resid. pipe ring MP-HI129-137M8/M10 assy 129 - 137 mm 95 mm 193 mm 25x2.2 mm 1500 N 00386419
Resid. pipe ring MP-HI137-145M8/M10 assy 137 - 145 mm 5 in 100 mm 203 mm 25x2.2 mm 1500 N 00386420
Resid. pipe ring MP-HI145-155M8/M10 assy 145 - 155 mm 104 mm 211 mm 25x2.2 mm 1500 N 00386421
Resid. pipe ring MP-HI155-163M8/10 assy 155 - 163 mm 109 mm 220 mm 25x2.2 mm 1500 N 00386422
Resid. pipe ring MP-HI163-172M8/M10 assy 163 - 172 mm 6 in 113 mm 228 mm 25x2.2 mm 1500 N 00386423
MP-MI
PC Software
Information
System MM
Light duty
Medium duty
System MQ
Wrench size 17 mm
System MQ
Certificates
HDG
9
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Ordering
Order designation Clamping Range - Connection Distance Width - B Material width Recommended Static Item Number
D: Diameter Thread center pipe and thickness Load for Suspended
to top - h (b x s) Installation Fzul according
RAL-GZ 655-B
page 78
Pipe Rings
Ordering
and Technical
Order designation Clamping Range - Connection Distance Width - B Material width Recommended Static Item Number
PC Software
Information
D: Diameter Thread center pipe and thickness Load for Suspended
to top - h (b x s) Installation Fzul according
RAL-GZ 655-B
Heavy-duty pipe ring MP-MI 1 1/2” G 48 - 54 mm M10/M12 50 mm 101 mm 24 x 2.0 mm 1800 N 00020853
Heavy-duty pipe ring MP-MI 54/57 G 54 - 57 mm M10/M12 53 mm 107 mm 24 x 2.0 mm 1800 N 00020855
Heavy-duty pipe ring MP-MI 2” G 57 - 64 mm M10/M12 55 mm 111 mm 24 x 2.0 mm 1800 N 00020857
Medium duty
Heavy-duty pipe ring MP-MI 68/72 G 68 - 72 mm M10/M12 60 mm 123 mm 24 x 2.0 mm 1800 N 00020860
System MM
Light duty
Heavy-duty pipe ring MP-MI 2 1/2” G 70 - 77 mm M10/M12 64 mm 130 mm 24 x 2.0 mm 1800 N 00020862
Heavy-duty pipe ring MP-MI 78/84 G 80 - 84 mm M10/M12 68 mm 139 mm 24 x 2.0 mm 1800 N 00020865
Heavy-duty pipe ring MP-MI 3” G 82 - 90 mm M10/M12 71 mm 144 mm 24 x 2.0 mm 1800 N 00020866
Heavy-duty pipe ring MP-MI 101.6 G 97 - 103 mm M10/M12 78 mm 163 mm 30 x 2.5 mm 2400 N 00020869
Heavy-duty pipe ring MP-MI 4” G 108 - 114 mm M10/M12 84 mm 174 mm 30 x 2.5 mm 2400 N 00020871
Medium duty
System MQ
Heavy-duty pipe ring MP-MI 125 G 122 - 127 mm M10/M12 90 mm 187 mm 30 x 2.5 mm 2400 N 00020876
Heavy-duty pipe ring MP-MI 133 G 132 - 137 mm M10/M12 95 mm 198 mm 30 x 2.5 mm 4500 N 00020879
Heavy-duty pipe ring MP-MI 5” G 137 - 142 mm M10/M12 98 mm 203 mm 30 x 2.5 mm 4500 N 00020882
Heavy-duty pipe ring MP-MI 159 G 156 - 162 mm M10/M12 107 mm 223 mm 30 x 2.5 mm 4500 N 00020885
Heavy-duty pipe ring MP-MI 6” G 162 - 168 mm M10/M12 110 mm 229 mm 30 x 2.5 mm 4500 N 00020887
Medium duty
System MQ
HDG
Ordering
Order designation Clamping Range - Connection Distance Width - B Material width Recommended Item Number
D: Diameter Thread center pipe and thickness Static Load for
to top - h (b x s) Suspended Installa-
Stainless Steel
Medium duty
tion Fzul according
System MQ
RAL-GZ 655-B
System MI
Heavy-duty pipe ring MP-MI 159 C
HDG
156 - 162 mm M16 107 mm 223 mm 30 x 2.5 mm 4500 N 00229087
Heavy-duty pipe ring MP-MI 6” C 162 - 168 mm M16 111 mm 229 mm 30 x 2.5 mm 4500 N 00020888
Heavy-duty pipe ring MP-MI 193.7 C 190 - 200 mm M16 127 mm 263 mm 30 x 3.0 mm 4500 N 00020892
Heavy-duty pipe ring MP-MI 212 C 210 - 219 mm M16 136 mm 283 mm 30 x 3.0 mm 4500 N 00020894
Heavy-duty pipe ring MP-MI 219.1 C 217 - 224 mm M16 139 mm 288 mm 30 x 3.0 mm 4500 N 00020896
Fixed points
System MQ
and sliders
Heavy-duty pipe ring MP-MI 244.5 C 242 - 250 mm M16 152 mm 314 mm 30 x 3.0 mm 4500 N 00020898
Heavy-duty pipe ring MP-MI 267 C 267 - 273 mm M16 170 mm 338 mm 30 x 3.0 mm 4500 N 00020900
Firestop systems
page 79
Pipe Rings
MP-MXI
PC Software
Information
Heavy duty pipe ring for heavy sanitary / medium industry with acoustic insulation and metric connection boss
Medium duty
System MM
Light duty
Medium duty
System MQ
9
Fixed points
System MQ
and sliders
Ordering
Order designation Clamping Range - Connec- Distance Width - B Material width Recommended Item Number
D: Diameter tion Thread center pipe and thickness Static Load for
to top - h (b x s) Suspended Installa-
tion Fzul according
RAL-GZ 655-B
Heavy-duty pipe ring MP-MXI 4” M16 108 - 116 mm M16 90 mm 210 mm 40 x 4.0 mm 3100 N 00372229
Airconditioning
and Ventilation
System MQ
Heavy-duty pipe ring MP-MXI 125 M16 122 - 126 mm M16 95 mm 221 mm 40 x 4.0 mm 3100 N 00372230
Heavy-duty pipe ring MP-MXI 133 M16 132 - 138 mm M16 100 mm 231 mm 40 x 4.0 mm 3100 N 00372231
Heavy-duty pipe ring MP-MXI 5” M16 139 - 144 mm M16 104 mm 238 mm 40 x 4.0 mm 3100 N 00372232
Heavy-duty pipe ring MP-MXI 159 M16 159 - 166 mm M16 115 mm 261 mm 40 x 4.0 mm 3100 N 00372233
Heavy-duty pipe ring MP-MXI 6” M16 163 - 170 mm M16 117 mm 265 mm 40 x 4.0 mm 7500 N 00372234
Firestop systems
Heavy-duty pipe ring MP-MXI 177.8 M16 177 - 182 mm M16 123 mm 284 mm 40 x 4.0 mm 7500 N 00372235
Heavy-duty pipe ring MP-MXI 193.7 M16 192 - 200 mm M16 132 mm 303 mm 40 x 4.0 mm 7500 N 00372236
Heavy-duty pipe ring MP-MXI 210 M16 210 - 218 mm M16 141 mm 321 mm 40 x 4.0 mm 7500 N 00372237
Heavy-duty pipe ring MP-MXI 219 M16 219 - 228 mm M16 146 mm 330 mm 40 x 4.0 mm 7500 N 00372238
page 80
For “extra” heavy duty
Fields of application:
■ Industrial pipe fitting
■ Mechanical installations Pipe Rings
■ Process and control lines
■ Heavy-duty pipe runs
Ordering
Benefits:
and Technical
Order designation Clamping Range - Connec- Distance Width - B Material width Recommended Item Number
PC Software
Information
■ Solid connection boss, welded all round D: Diameter tion Thread center pipe and thickness Static Load for
■ Strong clamping bolts for high loads to top - h (b x s) Suspended Installa-
tion Fzul according
■ Non-slip, pre-fitted profiled rubber inlay RAL-GZ 655-B
■ Suitable for the installation of pipes under dynamic loading if used
Heavy-duty pipe ring MP-MXI 244.5 M16 244 - 253 mm M16 158 mm 355 mm 40 x 4.0 mm 7500 N 00372239
with vibration damping components
Heavy-duty pipe ring MP-MXI 267/274 M16 267 - 274 mm M16 167 mm 375 mm 40 x 4.0 mm 7500 N 00372240
Heavy-duty pipe ring MP-MXI 275 M16 275 - 282 mm M16 173 mm 384 mm 40 x 4.0 mm 7500 N 00372241
Medium duty
Technical data:
System MM
Light duty
Heavy-duty
Max pipe
permissible loadring MP-MXI 324 M16
for suspensions 315 - 324 mm M16 190 mm 441 mm 50 x 5.0 mm 11000 N 00372242
upHeavy-duty
to 3″ pipe ring MP-MXI 326 M16 325 - 330
max. Frec.mm
= 6000M16
N 192 mm 445 mm 50 x 5.0 mm 11000 N 00372243
from 4″ up to 274 mm diameter,
Heavy-duty pipe ring MP-MXI 355 M16 max. Frec. = 10000 N
348 - 356 mm M16 205 mm 471 mm 50 x 5.0 mmBuilding
11000 N 00372244
from 324 up to 406 mm diameter max. Frec. = 15000 N material class
Heavy-duty pipe ring MP-MXI
from 457 up to 508 mm diameter 368 M16 364 - 372
max. Frec.mm M16
= 17000 N 213 mm 488 mm 50 x 5.0 mm B211000 N
„Normal flammability“
00372245
as per DIN 4102
Heavy-duty
Pipe pipe ring MP-MXI
ring material: 406 as
STW22 steel M16 400
per DIN EN 10-111
409(galvanized)
mm M16 232 mm 525 mm 50 x 5.0 mm 11000 N 00372246
Medium duty
Rubber inlay material:
Heavy-duty pipe ring MP-MXI 457 M16 454 - 462 mm EPDM
System MQ
M16 259 mm
Firestop 586 mm 70 x 6.0 mm 17000 N 00372247
Temperature resistance:
Heavy-duty pipe ring MP-MXI 508 M16
–40°C to
500 - 508 mm M16
+120°C 282 mm 632 mm 70 x 6.0 mm 17000 N 00372248
Shore A hardness: 40° ± 5° Shore-A
Noise reduction: ∆
LA = 16 dB (A)
*Version without
Fire rating data inacoustic
minutes insulation also available
Medium duty
System MQ
M16 connection boss, 3
/4″ connection boss, 1″ connection boss,
(max. Frec 6,000 N) (max. Frec 10,000 N) (max. Frec 10,000 N)
HDG
from pipe size 4″ (108 mm) up to 274 mm from pipe size 2″ (60 mm) up to 133 mm from pipe size 5″ (137 mm) up to 274 mm
‰ L L L L L L ‰ L L L L L L ‰ L L L L L L
mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm
0.5 ● ● ● ● ● ● 0.5 ● ● ● ● ● ● 0.5 ● ● ● ● ● ●
1 – ● ● ● ● ● 1 – ● ● ● ● ● 1 – ● ● ● ● ●
Stainless Steel
1.5 – 1.5 – 1.5 –
Medium duty
● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
System MQ
2 – ● ● ● ● ● 2 – – ● ● ● ● 2 – – ● ● ● ●
4 – – ● ● ● ● 4 – – – ● ● ● 4 – – – ● ● ●
6* – – – – ●* ● 6 – – – – ● ● 6 – – – – ● ●
8 – – – – ● ● 8 – – – – ● ● 8 – – – – ● ●
10 – – – – ● 10 – – – – – ● 10 – – – – ●
The determined values apply only if the The determined values apply only if the The determined values apply only if the
System MI
MFP-GP16 base plate and M16 threaded MFP-GP 3/4″ base plate and GR-G 3/4″ threaded MFP-GP1″ base plate and GR-R1″ threaded
rod of the 8.8 grade are used. pipe are used. pipeare used.
HDG
● Fatigue strength (2×106 load cycles) as per the S-N curve
L
Fixed points
System MQ
and sliders
L = min. 500 mm
and Ventilation
System MQ
page 71
Firestop systems
page 81
*Version without acoustic insulation also available
Pipe Rings
page 82
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Pipe Rings
and Technical
PC Software
Information
Advantages
Fast installation
Low cost
System approved; FM UL
Pipe support for piping
All models are for use with ANSI/MSS SP-58 and SP-69
Medium duty
System MM
Light duty
(Type 10)
Bow: material ASTM A653M-06a,
CS Type B / galvanizing ASTM A653-06a, Z180
(thickness min. 13µm)
Nut: material 1010 acc. to SAE J403 / ASTM B633-07
(min. thickness 13 µm)
Technical data
Medium duty
System MQ
Nominal pipe size Max. recom. load
to 2” 2.0 kN
21/2” - 4” 4.5 kN
6” - 8” 8.0 kN
L D
A
S
Medium duty
System MQ
C
H
HDG
Load
Stainless Steel
Medium duty
System MQ
FM
APPROVED
Load
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 83
Clevis hangers
Pipe Rings
Clevis hanger
SDC EG
and Technical
PC Software
Information
Advantages
Heavy-duty support for piping systems
All models are for use with ANSI/MSS SP-58 and SP-69
(Type 1) heavy duty sizes
Attachment to threaded rod provides easy installation and hight
adjustment
Medium duty
System MM
Light duty
Technical data
Nominal pipe size Max. recom. load
2” 2.8 kN
21/2” - 4” 4.8 kN
Medium duty
System MQ
5” 6.3 kN
6” 8.5 kN
8” 9.0 kN
10” - 12” 16.5 kN
Installation Option 1
Hilti Pipe Rings
1 2
Medium duty
System MQ
HDG
Installation Option 2
1 2 3 4
Stainless Steel
Medium duty
System MQ
FM
APPROVED
Ordering designation Pipe size clamping sales package pcs/carton kg/pc UL FM Item-no.
range
page 84
Hilti Pipe
Pipe Rings
Rings
and Technical
PC Software
Information
Key features
■ Rapid installation
– Insert pipe, “click” to close, saves valuable installation time
– Pre-assembled band hangers for economical pipe installation.
■ Safety first
Medium duty
– Quick-locking closure with double security thanks to a dual locking
System MM
Light duty
system; Can be opened again easily with a screwdriver.
– Single-hand installation: No risk of accident - no struggle to fit the pipe
and pipe ring to a threaded rod and no special nuts are necessary.
■ Cost saving
– Not expensive, special nuts have to be re-ordered if the standard nuts
are lost.
– Economical installation method reduces labour costs.
Medium duty
System MQ
■ System features
– Co-ordinated sprinkler system from one supplier, thus less administra-
tion work because of only one contact.
– System approved by VdS, FM and UL.
■ Compatible with Hilti MP pipe ring programmes
s
h
17
13
Medium duty
M12
System MQ
R M16
Loading as per VdS, FM and UL regulations
HDG
VdS FM UL
24
19
R
H
APPROVED
Stainless Steel
Medium duty
System MQ
System MI
HDG
Size Clamping range, Connecting nuts (supplied) Dimensions (mm) Package Ordering designation Item no.
D (mm) Wrench size/AF (mm) R bxs h contents
3
/4″ 27-28 M8/SW13* 15 21×1.5 50 100 MP-SP 3/4″-M 8 216592
1″ 34-35 M8/SW13* 18 21×1.5 50 100 MP-SP 1″-M 8 216593
Fixed points
and sliders
page 85
page 75
Pipe Rings
page 86
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Pipe Rings
and Technical
MI-CF
PC Software
Information
Medium duty
System MM
Light duty
Medium duty
System MQ
Fields of Application Technical data
nn Fastening pipes for refrigeration, cooling and air-conditioning
MI-CF
Material composition Closed-cell polyurethane foam 80
Features and Benefits
kg/m³ density
Medium duty
System MQ
50 mm.
per DIN 4108. Version: Foil over-
HDG
lapping longitudinal joint.For the
definition of the isolations thick-
ness the relevant environmental
conditions,temperature difference
and relative humidity have to be
considered
Stainless Steel
Medium duty
System MQ
Certificates Fire rating, Building material class
B2 as per DIN 4102 P.1, M1 as per
NF P92-501, B.S. 476 Part 6: 1989
System MI
HDG
9
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 87
Pipe Rings
page 88
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Pipe Rings
and Technical
PC Software
Information
Medium duty
System MM
Light duty
Medium duty
System MQ
MI-CF refrigeration pipe rings without load sheet
Insulating material thickness: 50 mm, hoop length: 100 mm
Medium duty
System MQ
HDG
Stainless Steel
Medium duty
System MQ
MI-CF refrigeration pipe rings with load sheet
Insulating material thickness: 50 mm, hoop length: 100 mm
60.3 2 100 96 M16 252.5 40 x 4,0 110.5 850 4.75 6 MI-CF 60/50 LS 372890
76.1 2 1/2 100 96 M16 260.5 40 x 4,0 114.5 1070 5.50 6 MI-CF 76/50 LS 372891
System MI
88.9 3 100 96 M16 283.7 40 x 4,0 122.5 1250 6.00 4 MI-CF 89/50 LS 372892
HDG
114.3 4 100 96 M16 309.0 40 x 4,0 135.0 1610 6.00 4 MI-CF 114/50 LS 372673
139.7 5 100 96 M16 327.0 40 x 4,0 145.5 1965 5.60 2 MI-CF 140/50 LS 372674
159.0 100 96 M16 355.1 40 x 4,0 158.0 2240 5.05 2 MI-CF 159/50 LS 372675
168.3 100 96 M16 363.2 40 x 4,0 162.0 2370 5.05 2 MI-CF 168/50 LS 372676
219.1 100 96 M16 429.2 40 x 4,0 184.0 3085 3.80 2 MI-CF 219/50 LS 372677
Fixed points
System MQ
and sliders
273.0 100 96 M16 475.4 40 x 4,0 207.0 3840 3.25 2 MI-CF 273/50 LS 372678
Airconditioning
and Ventilation
System MQ
Firestop systems
page 89
Pipe Rings
page 90
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Refrigeration Pipe Rings
Refrigeration pipe
pipe ring
ring
and Technical
PC Software
Information
D
D H
H
Medium duty
System MM
Light duty
B
B
Medium duty
System MQ
Pipe size [mm]
[inchl] Clamping
[mm]range, D Insulation[mm] [mm]H
thickness [mm]B Fmax
[N] Srec
[m] Connection
Width acrross boss/
flats (mm) Packaging
(pcs) Ordering
designation Item no.
[inchl] [mm] [mm] thickness [mm] [mm] [mm] [N] [m] Width acrross flats (mm) (pcs) designation
/4"
1
10 10 – 13.5 20 48 89 40 2.00 M8, M10/13 AF 18 MIP-M/10-13 314144
1
3 //48"" 10
15 10 –– 18
15 13.5 20
20 48
52 89
96 40
50 2.00
2.00 M8,M10/13
M8, M10/13AFAF 1818 MIP-M/10-13
MIP-M/15-18 314144
314145
3
1
//28"" 15
25 15 –
21 – 2518 20
20 52
55 96
103 50
75 2.00
2.75 M8, M10/13AFAF
M8, M10/13 1218 MIP-M/15-18
MIP-M/21-25 314145
314146
1
3 //24"" 25
30 21 –– 30
27 25 20
21 55
57 103
109 75
75 2.75
2.75 M8,M10/13
M8, M10/13AFAF 1212 MIP-M/21-25
MIP-M/27-30 314146
314147
3
1" /4" 30
38 27 –– 38
34 30 21
22 57
64 109
115 75
150 2.75
3.50 M8,M10/17
M8, M10/13AFAF 1212 MIP-M/27-30
MIP-M/34-38 314147
314148
11"11/4" 38
44,5 34 –– 45
42 38 22
22 64
68 115
128 150
200 3.50
3.75 M8,M10/17
M8, M10/17AFAF 1212 MIP-M/34-38
MIP-M/42-45 314148
314149
1111//24"" 44,5 42 –– 49
45 22 68 128 200 3.75 M8,M10/17
M10/17AFAF 1212 MIP-M/42-45 314149
PipeS.Rings
47 23 68 128 275 4.25 M8, MIP-M/48 314150
E. & O.
1 /2" 47 –– 57
49 23 68 128 275 4.25 M8,M10/17
M10/17AFAF 1212 MIP-M/48 314150
Hilti = registered trademark of Hilti Corp., Schaan | W 2221 0808 0-en | 1 Printed in Liechtenstein | © 2008 | Right of technical and programme changes reserved S. E. & O.
54/57 54 23 75 156 300 4.25 M8, MIP-M/54-57 314151
2" 54/57
64 54 –– 64
60 57 23
23 75
79 156
163 300
475 4.25
4.75 M8,M10/17
M8, M10/17AFAF 1212 MIP-M/54-57
MIP-M/60-64 314151
314152
reserved
22"11/2" 64
80 60 –– 80
76 64 23
24 79
86 163
177 475
750 4.75
5.50 M8,M10/17
M8, M10/17AFAF 1212 MIP-M/60-64
MIP-M/76-80 314152
314154
2 /2"
3" 80 76 –– 90
88 80 24
24 86
91 177
187 750
1100 5.50
6.00 M8,M10/17
M8, M10/17AFAF 1012 MIP-M/76-80
MIP-M/89 314154
314155
Hilti
and programme changes
3" 101.6/108 88 –– 108
101 90 24
25 91
107 187
218 1100
1300 6.00
6.00 M8,M10/17
M8, M10/17AFAF 810 MIP-M/89
MIP-M/102-108 314155
314156
4" 101.6/108
114,3 101 –– 115
113 108 25
25 107
105 218
214 1300
1700 6.00
6.00 M8,M10/17
M8, M10/17AFAF 68 MIP-M/102-108
MIP-M/114 314156
314157
4" 114,3
133 113 –– 134
130 115 25
25 105
116 214
237 1700
2000 6.00
6.00 M8, M10/17
M16/21 AF AF 66 MIP-M/114
MIP-M/133 314157
314684
Medium duty
5" 133 130 –– 141
138 134 25
25 116
126 237
256 2000
2000 6.00
6.00 M16/21AFAF
M16/21 66 MIP-M/133
MIP-M/140 314684
314159
System MQ
5" 159 138 ––160
159 141 25
25 126
136 256
276 2000
2200 6.00
6.00 M16/21AFAF
M16/21 66 MIP-M/140
MIP-M/159-160 314159
314160
HDG
6" 159
168.3 159 ––168
165 160 25
25 136
136 276
276 2200
2600 6.00
6.00 M16/21AFAF
M16/21 36 MIP-M/159-160
MIP-M/165-168 314160
314161
in Liechtenstein Steel
355
406.4 352 ––410
403 358 25
25 223
250 503
553 9800
11400 6.00
5.40 M16/24AFAF
M16/24 11 * MIP-M/356
* MIP-M/406 314165
314166
Medium duty
System MQ
406.4
457 403 ––461
454 410 25
25 250
275 553
605 11400
12800 5.40
4.80 M16/24AFAF
M16/24 11 * MIP-M/406
* MIP-M/457 314166
314167
457 454 – 461 25 275 605 12800 4.80 M16/24 AF 1 * MIP-M/457 314167
System MI
13
/"
28 15 21
15 –– 22
18 31
31 65
62 121
115 75
50 2.75
2.00 M8,
M8,M10/17
M10/17AFAF 1620 MIP-T/21
MIP-T/15-18 314685
314168
54 51
47 –– 54 38 86 177 300 4.25 M8,
M8,M10/17
M10/17AFAF 812 MIP-T/54 314687
System MQ
and sliders
2"1 64 63
60 –– 65
62 39
39 97
91 196
187 475
475 4.75
4.75 M8,
M8,M10/17
M10/17AFAF 66 MIP-T/64
MIP-T/60 314175
314688
2 /2" 80 64 76
63 –– 80
65 40
39 105
97 214
196 750
475 5.50
4.75 M8,
M8,M10/17
M10/17AFAF 66 MIP-T/76-80
MIP-T/64 314177
314175
3"
21/2" 80 88
76 –– 90
80 41
40 109
105 222
214 1100
750 6.00
5.50 M16/21 AF AF
M8, M10/17 46 MIP-T/89
MIP-T/76-80 314178
314177
3" 101.6 101
88 –– 108
90 42
41 127
109 257
222 1300
1100 6.00
6.00 M16/21
M16/21AFAF 44 MIP-T/102-108
MIP-T/89 314179
314178
Airconditioning
* MIP-T/114 314180
and Ventilation
5"
4" 133 133
113 ––140
115 44 43 143
127 291
257 2000
1700 6.00
6.00 M16/21
M16/21AFAF 33 * MIP-T/133-140
* MIP-T/114 314182
314180
5" 159 133 159
133 –– 160
140 45 44 156
143 317
291 2200
2000 6.00
6.00 M16/21
M16/21AFAF 23 * MIP-T/159-160
* MIP-T/133-140 314183
314182
6" 168.3 159 165
159 ––169
160 45 45 149
156 362
317 2600
2200 6.00
6.00 M16/24
M16/21AFAF 22 * MIP-T/165-168
* MIP-T/159-160 314184
314183
6" 216/219.1
168.3 216
165 ––219
169 50 45 183
149 420
362 5000
2600 6.00
6.00 M16/24
M16/24AFAF 22 * MIP-T/216-219
* MIP-T/165-168 314185
314184
216/219.1 216 – 219 50 183 420 5000 6.00 M16/24 AF 2 * MIP-T/216-219 314185
Srec..: recommended support/hanger spacing DIN 1988 * Available on request
Firestop systems
Srec..: recommended
Threaded support/hanger
rods / studs spacing
must be screwed DINinto
in fully 1988
the connecting boss in the pipe ring in order to ensure achievement of*the
Available on request
given loads.
Threaded rods / studs must be screwed in fully into the connecting boss in the pipe ring in order to ensure achievement of the given loads.
Hilti Corporation I 9494 Schaan I Liechtenstein I P +423-234 2111 I F +423-234 2965 I www.hilti.com
Pipe Rings
M-UB
PC Software
Information
Medium duty
System MM
Light duty
Connection Height - H Width - B Clamping Range - D: Order designation Sales Quantity Item Number
thread max. Diameter
M12 153 mm 114 mm 102 mm Round steel strap M-UB 3 1/2” zinced 25 pc 00409327
M12 167 mm 127 mm 115 mm Round steel strap M-UB 4” zinced 25 pc 00409328
M12 191 mm 152 mm 140 mm Round steel strap M-UB 5” zinced 25 pc 00409329
M12 219 mm 180 mm 168 mm Round steel strap M-UB 6” zinced 25 pc 00409330
M16 282 mm 236 mm 220 mm Round steel strap M-UB 8” zinced 10 pc 00409331
M16 336 mm 290 mm 274 mm Round steel strap M-UB 10” zinced 10 pc 00409332
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 92
System MQ Channel Installation
Hot Dipped Galvanized
Hilti. Outperform. Outlast.
System MQ Hot Dipped Galvanized
Description Pages
page 95
System MQ Hot Dipped Galvanized
page 96
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
System
System MQ channel MQ Hot hot-dip
installation Dippedgalvanised
Galvanized
and Technical
PC Software
Information
2.5
2.75
Definition of axes 3
2
2.5
F F
124
124
2
82.6
e2 e1 2
72
y-axis
52
2
41.2
41.3
e1 e2 2.75
20.6
"open" 41.3 41.3 41.3 41.3
z-axis 41.3 41.3 41.3 41.3
Medium duty
System MM
MQ-21-F MQ-41-F MQ-52-F MQ-72-F MQ-21D-F MQ-41D-F MQ- MQ-
Light duty
52-72D-F 124XD-F
Channel wall thickness t [mm] 2.0 2.0 2.5 2.75 2.0 2.0 2,5/2.75 3.0
Cross-sectional area A [mm2] 165.3 245.1 352.1 492.8 330.6 490.3 844.9 1237.2
Channel weight [kg/m] 1.48 2.13 3.01 4.20 2.97 4.29 7.26 10.09
Delivered lenght [m] 3/6 3/6 3/6 3/6 3/6 3/6 6 6
Material
σperm. [N/mm2]
Medium duty
System MQ
Permissible stress 152.6 152.6 152.6 152.6 152.6 152.6 152.6 152.6
Cont. hot-dip galvanised (HDG plus), 70 µm
Hot-dip galvanised, min. 45 µm ● ● ● ● ● ● ● ●
Cross-section values
Y-axis
Axis of gravity "open" 1) e1 [mm] 10.84 21.13 26.67 36.79 20.60 41.30 62.02 62.00
Axis of gravity e2 [mm] 9.76 20.17 25.33 35.22 20.60 41.30 61.99 62.00
Medium duty
System MQ
Section modulus Wz [cm3] 2.13 3.55 5.23 7.46 4.25 7.10 12.65 15.31
HDG
Radius of gyration iz [cm] 1.63 1.73 1.75 1.77 1.63 1.73 1.76 1.60
Selection of channel section:
● The given data is based on a single span (simply-supported beam) bearing a single load, F (kN), at mid-span, L/2.
● If several loads are acting on a single span (simply-supported beam), these may be summated and regarded as a single load acting at mid span. By taking this
approach, the design calculation is on the safe side. (➔ Cross section selection table).
● The permissible stress in the steel and the max. deflection, L/200, are not exceeded with the given max. span width, L (cm).
● The channel's own weight was taken into account.
Stainless Steel
Medium duty
System MQ
Max. span width, L (cm) / deflection f (mm) 3)
L f L f L f L f L f L f L f L f
F (kN) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm)
0.25 133 6.7 306 15.3 419 20.9 599 29.9 288 14.4 614 30.7 936 46.8 1034 51.7
0.50 95 4.8 226 11.3 321 16.0 482 24.1 216 10.8 496 24.8 821 41.0 938 46.9
0.75 68 2.6 187 9.3 268 13.4 411 20.5 179 9.0 424 21.2 735 36.8 861 43.0
1.00 51 1.5 153 6.8 235 11.7 364 18.2 145 6.2 375 18.8 670 33.5 797 39.9
System MI
1.25 41 <1 123 4.4 204 9.5 329 16.5 116 4.1 340 17.0 618 30.9 745 37.2
HDG
1.50 34 <1 103 3.1 171 6.8 303 15.1 97 2.9 291 12.7 576 28.8 701 35.0
1.75 29 <1 88 2.3 147 5.0 264 11.7 84 2.1 252 9.6 541 27.0 663 33.1
2.00 26 <1 77 1.7 129 3.9 233 9.1 73 1.6 222 7.5 511 25.6 630 31.5
2.25 23 <1 69 1.4 115 3.1 208 7.3 65 1.3 198 6.0 470 22.2 601 30.1
2.50 20 <1 62 1.1 104 2.5 188 6.0 59 1.0 179 4.9 428 18.7 576 28.8
2.75 19 <1 56 <1 94 2.1 171 5.0 53 <1 163 4.1 393 15.8 554 27.7
Fixed points
System MQ
and sliders
3.00 17 <1 52 <1 87 1.8 157 4.2 49 <1 150 3.5 363 13.6 534 26.7
3.50 15 <1 44 <1 74 1.3 135 3.1 - - 129 2.6 315 10.3 495 24.3
4.00 13 <1 39 <1 65 <1 118 2.4 - - 113 2.0 277 8.1 439 19.4
4.50 11 <1 34 <1 58 <1 105 1.9 - - 100 1.6 248 6.5 394 15.8
5.00 10 <1 31 <1 52 <1 95 1.5 - - 90 1.3 224 5.3 358 13.1
6.00 8 <1 26 <1 43 <1 79 1.1 - - 75 <1 187 3.7 301 9.4
Airconditioning
and Ventilation
System MQ
L[cm]
● The MQ-41-F to MQ-124XD-F channels can be used because the 1N 0,1 0,1 – 0,001
permissible span width (tabluated value) is larger or equal 1 kN 100 100 1000 – F
page
page 97
5
System MQ Hot Dipped Galvanized System
SystemMQ
MQchannel
channelinstallation
installationhot-dip
hot-dipgalvanised
galvanised
Channel selection
selection diagram
diagram Load
LoadFF(kN)
25.00
25.00
(kN)
and Technical
(hot-dip galvanised)
galvanised)
PC Software
Information
F[kN]
Medium duty
System MM
Light duty
MQ-52-F
MQ-52-F
10.00
10.00
L/2 L/2
L[cm] 5.00
5.00
MQ-41-F
MQ-41-F
Medium duty
System MQ
MQ-21-F
MQ-21-F
0.00
0.00
00 25
25 50
50 100
100 150
150 200
200 250
250 300
300
Span
Spanwidth
width(cm)
(cm)
Load
LoadFF(kN)
(kN)
30.00
30.00
Hilti Pipe Rings
MQ-124X
MQ-124XD-F
D-F
25.00
25.00
20.00
20.00
Medium duty
System MQ
15.00
15.00
HDG
MQ-52-72D-F
MQ-52-72D-F
10.00
10.00
Stainless Steel
Medium duty
System MQ
5.00 MQ-41D-F
5.00 MQ-41D-F
MQ-21D-F
MQ-21D-F
0.00
0.00 0 25 100 200 300 400 500 600
0 25 100 200 300 400 500 600
Span width (cm)
Span width (cm)
Channel
Channel selection
selection table
table (hot-dip
(hot-dip galvanised)
System MI
galvanised)
HDG
124
124
2
124
124
2 2
82.6
2
72
82.6
2
F[kN]
72
52 52
2 2
41.2
41.3
2.75
F[kN]
41.2
20.6
41.3
2.75
20.6
Fixed points
41.3
41.3 41.3 41.3 41.3 41.3
L/2 L/2 41.3 41.3 41.3
L/2 L/2
L[cm]
L[cm] Max. load, F (kN) / deflection, f (mm)
Max.MQ-21-F
load, F (kN) / deflection,
MQ-41-F
f (mm)
MQ-52-F MQ-72-F MQ-21-D-F MQ-41 D-F MQ-52-72 D-F MQ-124 XD-F
MQ-21-F MQ-41-F MQ-52-F MQ-72-F MQ-21-D-F MQ-41 D-F MQ-52-72 D-F MQ-124 XD-F
Span width F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm)
LSpan
(cm)width Fmax.
(kN) L/200
f (mm) Fmax.
(kN) L/200
f (mm) F (kN)
max. f (mm)
L/200 F (kN)
max. f (mm)
L/200 F (kN)
max. f (mm)
L/200 F (kN)
max. f (mm)
L/200 F (kN) L/200
max. f (mm) F (kN)
max. f (mm)
L/200
L (cm) max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200
25 2.05 <1 6.16 <1 10.37 0.1 18.93 <1 3.00 <1 6.00 <1 11.20 <1 73.63 <1
Airconditioning
and Ventilation
25 2.05 <1 6.16 <1 10.37 0.1 18.93 <1 3.00 <1 6.00 <1 11.20 <1 73.63 <1
System MQ
50 1.03 1.4 3.09 <1 5.21 0.6 9.5 <1 2.94 0.7 6.00 <1 11.20 <1 36.95 <1
50 1.03 1.4 3.09 <1 5.21 0.6 9.5 <1 2.94 0.7 6.00 <1 11.20 <1 36.95 <1
75 0.68 3.1 2.06 1.6 3.47 1.3 6.33 <1 1.96 1.7 6.00 <1 11.20 <1 24.63 <1
75 0.68 3.1 2.06 1.6 3.47 1.3 6.33 <1 1.96 1.7 6.00 <1 11.20 <1 24.63 <1
100 0.45 5.0 1.54 2.9 2.59 2.3 4.74 1.6 1.46 2.9 4.51 1.5 11.20 1.0 18.46 1.0
100 0.45 5.0 1.54 2.9 2.59 2.3 4.74 1.6 1.46 2.9 4.51 1.5 11.20 1.0 18.46 1.0
125 0.28 6.3 1.23 4.5 2.07 3.6 3.78 2.6 1.16 4.6 3.60 2.3 9.04 1.5 14.75 1.5
125 0.28 6.3 1.23 4.5 2.07 3.6 3.78 2.6 1.16 4.6 3.60 2.3 9.04 1.5 14.75 1.5
150 0.19 7.5 1.02 6.5 1.72 5.1 3.14 3.7 0.96 6.6 2.99 3.3 7.52 2.2 12.27 2.2
150 0.19 7.5 1.02 6.5 1.72 5.1 3.14 3.7 0.96 6.6 2.99 3.3 7.52 2.2 12.27 2.2
175 0.14 8.8 0.86 8.8 1.47 7.0 2.68 5.1 0.79 8.8 2.55 4.5 6.43 3.0 10.49 3.0
Firestop systems
175 0.14 8.8 0.86 8.8 1.47 7.0 2.68 5.1 0.79 8.8 2.55 4.5 6.43 3.0 10.49 3.0
200 0.10 10.0 0.65 10.0 1.28 9.1 2.34 6.6 0.59 10.0 2.23 5.9 5.61 3.9 9.16 3.9
200 0.10 10.0 0.65 10.0 1.28 9.1 2.34 6.6 0.59 10.0 2.23 5.9 5.61 3.9 9.16 3.9
225 0.07 11.3 0.51 11.3 1.09 11.3 2.07 8.4 0.46 11.3 1.97 7.5 4.97 5.0 8.12 5.0
225 0.07 11.3 0.51 11.3 1.09 11.3 2.07 8.4 0.46 11.3 1.97 7.5 4.97 5.0 8.12 5.0
275 0.04 13.8 0.32 13.8 0.71 13.8 1.68 12.5 0.28 13.8 1.59 11.2 4.03 7.4 6.60 7.4
275 0.04 13.8 0.32 13.8 0.71 13.8 1.68 12.5 0.28 13.8 1.59 11.2 4.03 7.4 6.60 7.4
300 0.02 15.0 0.26 15.0 0.58 15.0 1.53 15.0 0.22 15.0 1.45 13.3 3.68 8.8 6.02 8.8
300 0.02 15.0 0.26 15.0 0.58 15.0 1.53 15.0 0.22 15.0 1.45 13.3 3.68 8.8 6.02 8.8
page 7
page 98 page 7
System MQ channel installation HDG plus System MQ Hot Dipped Galvanized
and Technical
PC Software
Information
2
2
Definition of axes
82.6
2
2
41.2
41.3
F F
31
20.6
e2 e1 41.3 41.3
41.3 41.3 41.3
y-axis
e1 e2
"open" z-axis
MQ-21- MQ-31- MQ-41- MQ-21D- MQ-41D-
Medium duty
HDG plus HDG plus HDG plus HDG plus HDG plus
System MM
Light duty
Channel wall thickness t [mm] 2.0 2.0 2.0 2.0 2.0
Cross-sectional area A [mm2] 165.3 204.9 245.1 330.6 490.3
Channel weight [kg/m] 1.48 1.80 2.13 2.98 4.29
Delivered length [m] 6 6 6 6 6
Material
Permissible stress σperm. [N/mm2] 188.3 181.8 175.3 188.3 175.3
Medium duty
Cont. hot-dip galvanised (HDG plus), 70 µm ● ● ● ● ●
System MQ
Hot-dip galvanised, min. 45 µm
Cross-section values
Y-axis
Axis of gravity "open" 1) e1 [mm] 10.84 16.01 21.13 20.60 41.30
Axis of gravity e2 [mm] 9.76 14.99 20.17 20.60 41.30
Moment of inertia Iy [cm4] 0.92 2.60 5.37 4.98 30.69
Medium duty
System MQ
Radius of gyration iz [cm] 1.63 1.69 1.73 1.63 1.73
Selection of channel section:
HDG
● The given data is based on a single span (simply-supported beam) bearing a single load, F (kN), at mid-span, L/2.
● If several loads are acting on a single span (simply-supported beam), these may be summated and regarded as a single load acting at mid span. By taking this
approach, the design calculation is on the safe side. (➔ Cross section selection table).
● The permissible stress in the steel and the max. deflection, L/200, are not exceeded with the given max. span width, L (cm).
● The channel's own weight was taken into account.
● HDG plus channels: The permissible stress σD / γG/Q where γ = 1.4. σD results from the higher yield strength (point) resulting from cold forming as per
Stainless Steel
DAST-RILI 016 from 1992: σD = fyk / γM where γM = 1.1
Medium duty
System MQ
Max. span width, L (cm) / deflection f (mm) 3)
L f L f L f L f L f
F (kN) (cm) (mm) (mm) (mm) (cm) (mm) (cm) (mm) (cm) (mm)
0.25 133 6,7 218 10.9 306 15.3 288 14.4 614 30.7
0.50 95 4,8 159 7.9 226 11.3 216 10.8 496 24.8
0.75 78 3,9 131 6.5 187 9.3 179 9.0 424 21.2
1.00 63 2,8 114 5.7 163 8.1 156 7.8 375 18.8
System MI
1.25 51 1,8 94 4.0 141 6.6 140 7.0 340 17.0
HDG
1.50 42 1,2 78 2.8 118 4.6 120 5.3 313 15.6
1.75 36 <1 67 2.0 101 3.4 103 3.9 288 14.1
2.00 32 <1 59 1.6 89 2.6 90 3.0 254 11.0
2.25 28 <1 52 1.2 79 2.1 80 2.4 227 8.9
2.50 25 <1 47 1.0 71 1.7 72 1.9 205 7.3
2.75 23 <1 43 <1 65 1.4 66 1.6 187 6.1
Fixed points
System MQ
and sliders
page 4 page 99
System
System MQ
MQ Hot Dipped
channel
channel Galvanized
installation
installation HDG
HDG plus
plus
Channel selection
selection diagram
diagram
Load,
Load,FF(kN)
25.00
25.00
(kN)
and Technical
(HDG-plus) Single
Single span
span
PC Software
Information
(simply supported)
supported)
20.00
20.00
with single load at mid
mid span,
span, L/2
L/2
All values were calculated
calculated for
for aa permissible
permissiblestress
stressof
of
σperm.
perm. (see technical data
data for
for channel
channel selection)
selection)and
andaa
deflection of L/200.
15.00
15.00
Medium duty
System MM
Light duty
F[kN]
F[kN] 10.00
10.00
MQ-41-
MQ-41-
HDG
HDGplus
plus
L/2 L/2
L/2 5.00
5.00 MQ-31-
MQ-31-
L[cm] HDG
HDGplus
plus
Medium duty
System MQ
MQ-21-
MQ-21-
HDG
HDGplus
plus
0.00
0.000
0 2525 5050 100
100 150
150 200
200 250
250 300
300
Span width
Span (cm)
width (cm)
Load
LoadFF(kN)
(kN)
30.00
30.00
Hilti Pipe Rings
25.00
25.00
20.00
20.00
Medium duty
System MQ
15.00
15.00
HDG
10.00
10.00
MQ-41D-HDG plus
Stainless Steel
MQ-41D-HDG plus
Medium duty
System MQ
5.00
5.00 MQ-21D-HDG plus
MQ-21D-HDG plus
0.00
0.00 0 25 100 200 300 400 500 600
0 25 100 200 300 400 500
Span width (cm)600
Span width (cm)
Channel
Channel selection
selection table
table (HDG
(HDG plus)
System MI
plus)
HDG
82.6
2
2 2
82.6
F[kN] 2
2 2
41.2
41.3
F[kN]
31
41.2
20.620.6
41.3
31
Fixed points
System MQ
41.3 41.3
and sliders
25 2.53 <1 4.68 <1 7.08 <1 3.00 <1 6.00 <1
System MQ
50 1.27 1.7 2.35 1.1 3.56 <1 3.00 <1 6.00 <1
50 1.27 1.7 2.35 1.1 3.56 <1 3.00 <1 6.00 <1
75 0.82 3.8 1.56 2.5 2.37 1.9 2.42 2.0 6.00 <1
75 0.82 3.8 1.56 2.5 2.37 1.9 2.42 2.0 6.00 <1
100 0.45 5.0 1.17 4.5 1.77 3.3 1.81 3.6 5.19 1.7
100 0.45 5.0 1.17 4.5 1.77 3.3 1.81 3.6 5.19 1.7
125 0.28 6.3 0.82 6.3 1.41 5.2 1.44 5.7 4.14 2.6
125 0.28 6.3 0.82 6.3 1.41 5.2 1.44 5.7 4.14 2.6
150 0.19 7.5 0.57 7.5 1.17 7.4 1.09 7.5 3.44 3.8
150 0.19 7.5 0.57 7.5 1.17 7.4 1.09 7.5 3.44 3.8
175 0.14 8.8 0.41 8.8 0.86 8.8 0.79 8.8 2.94 5.2
Firestop systems
175 0.14 8.8 0.41 8.8 0.86 8.8 0.79 8.8 2.94 5.2
200 0.10 10.0 0.31 10.0 0.65 10.0 0.59 10.0 2.56 6.8
200
225 0.10
0.07 10.0
11.3 0.31
0.23 10.0
11.3 0.65
0.51 10.0
11.3 0.59
0.46 10.0
11.3 2.56
2.27 8.66.8
225
275 0.07
0.04 11.3
13.8 0.23
0.14 11.3
13.8 0.51
0.32 11.3
13.8 0.46
0.28 11.3
13.8 2.27
1.84 8.6
12.8
275
300 0.04
0.02 13.8
15.0 0.14
0.11 13.8
15.0 0.32
0.26 13.8
15.0 0.28
0.22 13.8
15.0 1.84
1.64 12.8
15.0
300 0.02 15.0 0.11 15.0 0.26 15.0 0.22 15.0 1.64 15.0
page 6
page
page 6100
System MQ channel installation hot-dip galvanised System MQ Hot Dipped Galvanized
and Technical
PC Software
Information
Type of load 1: uniform Type of load 2: single Type of load 3 Type of load 4 Type of load 5
F1 F1 F2 F2 F3 F3 F3
F1 = q · I 1/
2
1/
2 1/
3
1/
3
1/
3
1/ 1/ 1/ 1/
4 4 4 4
Medium duty
System MM
MQK-21/300-F 300 850 850 850 850 420 420 420 420 280 280
Light duty
MQK-21/450-F 450 500 500 560 560 180 180 280 280 180 180
MQK-41/300-F 300 2560 2560 2560 2560 1280 1280 1280 1280 850 850
MQK-41/450-F 450 1710 1710 1710 1710 850 850 850 850 570 570
MQK-41/600-F 600 1270 1270 1270 1270 620 620 630 630 420 420
MQK-41/1000-F 1000 580 580 750 750 210 210 360 360 220 220
MQK-41/600/4-F 600 1270 1270 1270 1270 620 620 630 630 420 420
MQK-41/1000/4-F 1000 580 580 750 750 210 210 360 360 220 220
Medium duty
System MQ
MQK-72/450-F 450 5260 3180 5260 3180 2630 1590 2630 1590 1750 1060
MQK-72/600-F 600 3930 2380 3930 2380 1970 1190 1960 1190 1310 790
MQK-21 D/300-F 300 2430 2430 2430 2430 1220 1220 1210 1210 810 810
MQK-21 D/450-F 450 1620 1620 1620 1620 810 810 810 810 540 540
MQK-21 D/600-F 600 1210 1210 1210 1210 570 570 600 600 400 400
MQK-41 D/1000-F 1000 2220 1400 2220 1400 1110 700 1110 700 740 460
Medium duty
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
System MQ
HDG
HVZ-R adhesive anchor HST-R stud anchor
® ®
Stainless Stainless
steel steel
Stainless Steel
Medium duty
System MQ
Technical data for brackets with angle brace (hot-dip galvanised)
Type of load 1: uniform Type of load 2: single Type of load 3 Type of load 4 Type of load 5
F1 F1 F2 F2 F3 F3 F3
F1 = q · I 1/2 1/2 1/3 1/3 1/3 1/4 1/4 1/4 1/4
System MI
HDG
Bracket L (mm) Brace F1 [N] 1) F1 [N] 1) F1 [N] 1) F2 [N] 1) F3 [N] 1)
MQK-21/450 -F 450 short 4420 1140 520 1970 1750
MQK-41/450-F 450 short 6390 3450 2390 3190 2130
MQK-41/600-F 600 long 5540 2580 2840 2510 1890
MQK-41/1000-F 1000 long 2250 3400 430 1700 1130
Fixed points
System MQ
and sliders
1)
Loading capacity of the bracket (steel loading capacity) or the loading capacity of the bracket is reached with the HVZ-R, HIT-RTZ or HST-R M12 fastening.
Load values are for grade C20/25 concrete (≈ B25).
Alternatively, fastening in solid or hollow brick with HIT HY 50 and approval is possible. Use stainless-steel anchor rods (loading values not given in this table).
The bracket’s own weight has been allowed for.
The loads apply only if the bracket is fastened away from a building component edge (fastenings made at component edges must be designed separately).
Separate verification must be provided that forces are transferred to the respective base material, i.e. steel and concrete.
Firestop systems
The application guidelines in anchor approvals must be observed. Loading values according to approval status July 2005.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
2.75
2.5
HDG ASTM
page 102
52
72
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
page 103
System MQ Hot Dipped Galvanized
40
4.5
3.0
500
System MQ Hot Dipped Galvanized
8.0
25
5.0
36
MQM-M12-F
page 104
M12
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
System MQ channel installation hot-dip galvanised System MQ Hot Dipped Galvanized
and Technical
PC Software
Information
Features:
■ Single part, simple and time-saving in use.
■ For all types of channels.
■ For threaded roads from M8 to M16.
Medium duty
System MM
Light duty
Technical data:
Medium duty
Galvanising: hot-dip galvanised, min. 56 µm
System MQ
MQA-F pipe ring saddle (HDG) M 8
M10
Nut: EN-GJMW-450-7 as per DIN EN 1562 M12
M16
Plate: S 235 JR as per DIN EN 10 025
Medium duty
System MQ
Rec. tensile load Tightening torque, Bending moment, threaded rod 4.6
Zrec (kN) MD (Nm) (Nm) 1)
HDG
Item Channel I/II Channel III
MQA-M 8-F 3.0 3.0 9 6.4
MQA-M10-F 5.0 5.0 18 12.8
MQA-M12-F 5.0 8.0 31 22.4
MQA-M16-F 5.0 8.0 40 56.9
Stainless Steel
Medium duty
Channel I: MQ-21-F, MQ-41-F, MQ-21D-F, MQ-41D-F
System MQ
Channel II: MQ-21-HDG plus, MQ-31-HDG plus, MQ-41-HDG plus, MQ-21D-HDG plus, MQ-41D-HDG plus
Channel III: MQ-52-F, MQ-72-F, MQ-52-72D-F, MQ-124XD-F
1)
Calculation as per DIBt
System MI
HDG
IBMB no. 3897/1802-5
3/4"
Material: S 235 JR as per DIN EN 10 025 1"
and sliders
Rec. tensile load, Rec. shear load, Tightening torque Bending moment,
Zrec (kN) Qrec (kN) MD (Nm) threaded rod 4.6 (Nm)
Item: Channel I/III Channel II
MQG-2-M16-F 6.0 5.0 8.0 40 56.9
MQG-2-1/2″-F 6.0 5.0 8.0 40 22.4
MQG-2-3/4″-F 6.0 5.0 8.0 40 100.0
Firestop systems
connectors
PC Software
Information
Features: 19.4 19
System MM
Light duty
Technical data:
Material: S 235 JR as per DIN EN 10025
Material thickness: 4 mm
Medium duty
90 º angle (HDG)
Weight Packaging Ordering Item no.
each (g) contents (pcs) designation
Angle, 2 hole, 90° 110 20 ➀ MQW-2-F 304171
Hilti Pipe Rings
61 61
HDG
55
105
MQ-HDG plus:
MQ-HDG plus: MQ-HDG plus:
Frec 3.0 kN Frec 2.4 kN
Frec 4.5 kN Frec 3.7 kN Frec 8.1 kN Frec 5.0 kN
➃ MQ-F (HDG): ➄ 46
61
111
46
MQ-HDG plus:
Frec 6.8 kN Frec 2.5 kN
45 º angle (HDG)
System MI
HDG
➀ ➁ ➂
System MQ
and sliders
106
45°
45°
45°
56
100
System MQ
45°
* Available on request
MQ-HDG plus:
Frec 4.5 kN Frec 3.0 kN
55
110
Angle bracket (HDG) ➀ MQ-F (HDG):
Frec 2.0 kN
and Technical
PC Software
Information
Frec 2.0 kN
Weight Packaging Ordering Item no.
each (g) contents (pcs) designation
155
Angle bracket, one brace 460 10 ➀ MQW-S/1-F 304180 118 MQ-HDG plus:
Frec 2.0 kN Frec 2.0 kN
Angle bracket, two braces 1180 10 ➁ MQW-S/2-F 304181
13.5
Medium duty
System MM
Light duty
VdS
MQ-HDG plus: MQ-HDG plus:
Frec 2.0 kN Frec 3.0 kN Frec 8.0 kN Frec 5.0 kN
For VdS-approved installation see www.hilti.com/vds-installation
➁ 198
Medium duty
System MQ
MQ-F (HDG):
Frec 3.0 kN
Frec 3.0 kN
Medium duty
Frec 4.0 kN Frec 6.0 kN Frec 8.1 kN Frec 6.0 kN
System MQ
HDG
Connector, two dimensional (HDG) ➀
167 MQ-F (HDG):
Frec 5.4 kN
Weight Packaging Ordering Item no.
each (g) contents (pcs) designation Frec 5.0 kN
Stainless Steel
Connector, double, two dimensional 446 10
Medium duty
➀ MQV-2/2D-F 304150
System MQ
Connector, triple, two dimensional 602 10 ➁ MQV-3/2D-F 304152
112
MQ-HDG plus:
Frec 8.1 kN Frec 5.0 kN
➁
167 MQ-F (HDG):
Frec 5.4 kN
System MI
Frec 5.4 kN
HDG
112
MQ-HDG plus:
Frec 8.1 kN Frec 5.4 kN
Fixed points
System MQ
and sliders
205
205
45
Channel base /
Medium duty
System MM
Light duty
■
System MQ
Technical data:
Material:
page 100
S 235 JR as per DIN EN 10025
Technical data:
Galvanizing: hot-dip galvanized, min. 56 µm
Hilti Pipe Rings
Technical data:
Material: S 235 JR
Separate design verification of the fastening onasthe
perbase
DINmaterial
EN 10025must
Material: S 235 JR as per DIN EN 10025
be provided.
Galvanizing: hot-dip galvanized, min. 56 µm
Galvanizing: hot-dip galvanized, min. 56 µm
Separate design verification of the fastening on the base material must
Separate design
be provided. verification of the fastening on the base material must
be provided.
167
System MQ
112
Base material
Suitable for
connector (HDG)
Weight Packaging Ordering Item no.
HDG
A
➀
Base material451
channel height
connector (HDG)
each (g) contents (pcs) designation 167 Channel
➀ 167 B
MQ-41, MQ-21D 10 ➀ MQV-2/2D-14-F 304151
112 112
112
Frec
Suitable for Weight Packaging Ordering Item no. A
MQ-21,
Suitable
channel for MQ-31, MQ-41
height 110(g)
Weight
each 20 (pcs)
Packaging
contents ➁ MQP-1/1-F
Ordering
designation 304161
Item no. Channel A
MQ-21,
channel
MQ-41, MQ-21DMQ-31, MQ-41
height 190(g)
each
451 20 (pcs)
contents
10 ➂
➀ MQP-1/3-F
designation
MQV-2/2D-14-F 304162
304151
112 Channel
B
B Frec
MQ-41,
MQ-21, MQ-21D 451 MQV-2/2D-14-F 304151
112
MQ-21, MQ-31,
MQ-31, MQ-41
MQ-41 290
110 10
20 ➀
➃
➁ MQP-2/3-F
MQP-1/1-F 304163
304161
Frec
MQ-21,
MQ-21, MQ-31,
MQ-31, MQ-41 110 20 ➁ MQP-1/1-F 304161
Stainless Steel
MQ-21,
MQ-21, MQ-31,
MQ-31, MQ-41 190 20
System MQ
MQ-41 290 10 ➂
➃ MQP-1/3-F
MQP-2/3-F 304162
304163
MQ-21, MQ-31, MQ-41 290 10 ➃ MQP-2/3-F 304163 ➁ ➂
MQV-2/2D-14-F F
5.0
rec
MQ-41-F
Channel
Double
Bolt
MQN-F
Push-
40
Tightening torque
14x19
Item 7.8
F(kN)
rec
MQ-41-HDG
Channel
(B) plus Double
Bolt
(A) MQN-F
Push-
button 40
Tightening
M (Nm) torque
D
3x
18x12 59
Item (kN) (B) (A) button M (Nm)
D 61 18x12
80
MQV-2/2D-14-F 5.0 MQ-41-F Double MQN-F 40 118 3x
System MI
14x19
MQV-2/2D-14-F 5.0 MQ-41-F Double MQN-F 40 14x19
61 40
59
7.8 MQ-41-HDG plus Double MQN-F 40 ➃ 60
61
61
118 80 59
118 80
61 40
61 40
➃ 60
➃ 60
59
Fixed points
System MQ
and sliders
59
59 11.5 34
11.5 34
11.5 34
System MQ
Base
Base material
Suitable for
material
channel height connector
Weight
contents (pcs) 45
Packaging
connector
each (g)
45 º
º (HDG)
Ordering
(HDG)
designation
Item no.
45°
45°
41 42
14
14
41 42
41 42
page 108
System MQ channel installation hot-dip galvanised System MQ Hot Dipped Galvanized
and Technical
PC Software
Information
105
Suitable for Weight Packaging Ordering Item no.
channel height each (g) contents (pcs) designation
20x14
➁
A A
F Bolt Push- Tightening torque
Medium duty
rec
System MM
(kN) (A) button MD (Nm)
Light duty
106
Medium duty
System MQ
20x14
Frec
Channel base firestop tested
8
200
250
100
Medium duty
System MQ
49
HDG
(kN) (A) button MD (Nm) 75
Item Channel I Channel II 75
54 190
Stainless Steel
Medium duty
System MQ
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 110
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
System MQ Hot Dipped Galvanized
and Technical
PC Software
Information
Medium duty
System MM
Light duty
Medium duty
System MQ
Hilti Pipe Rings
System MQ channel installation hot-dip galvanised
Accessories
Features:
■ Matching items in programme.
Medium duty
System MQ
HDG
Stainless Steel
Medium duty
System MQ
Technical data:
Galvanising: hot-dip galvanised, min. 56 µm
System MI
HDG
Boss plate (HDG)
52.5
45.5
5
Material: S 235 JR as per DIN EN 10025 9.5
11.5
Thread Weight Packaging Ordering Item no. 13.5
each (g) contents (pcs) designation 17.5
M 8 92 20 MQZ-L9-F 304196
Fixed points
System MQ
and sliders
page 111
Adaptor (HDG)
System
System MQ
MQ Hot
Hot Dipped Galvanized
Dipped Galvanized
System MM
Light duty
Channel
Pipe ringsendcap
accessories
➀ d ➁
40 11 x 18
Made of polypropylene (PP), suitable for all installation channels. 31
21
Base
channel height plate MGS 2-
Suitable for Weight
1
/2″- FPackaging
each (g) (HDG)
contents (pcs.)
Ordering
designation
Item no. 4
MQ-21, MQ-21DS235 JRG2C
Material: 2 50 ➀ MQZ-E21 370598 H
MQ-31 85
hot-dip galvanized,2min. 45 µm50 ➁ MQZ-E31 369686
Hilti Pipe Rings
Type: ➂
MQ-41, MQ-41D 2 50 ➂ MQZ-E41 369685 120
d H Fz rec Packaging Ordering Item no.
[Inch] [mm] [kN] contents (pcs) designation
1
⁄2" 19 5.0 10 MGS 2-1⁄2-F 202842 41.3
The means of fastening to the base material, e.g. anchors, requires separate verification.
Medium duty
d
System MQ
3
⁄4" 21 13x18 8.2 10 MGM 2-3⁄4"-F 202840
Medium duty
System MQ
d
Base plate MFP-GP 16-F (HDG) H
∅a
Material: S 235 JR as per DIN EN 10025
System MI
Connection Dimensions Max. load Shear load for Packaging Ordering Item no.
boss H a Frec (A = 150 mm) contents (pcs) designation 109
d [mm] [mm] [kN] [kN]
150 100
M16 20 13.5 15.0 2.0 25 MFP-GP 16-F 304279
The means of fastening to the base material, e.g. anchors, requires separate verification.
Fixed points
System MQ
and sliders
/4″
3
1000 5 GR-G /4″-F 1 m
3
304781
System MQ
Angle
and Technical
MP-MQE-W-F
PC Software
Information
Medium duty
System MM
Light duty
Medium duty
System MQ
Applications Technical data
nn 90° connection of MQ hot-dip galvanized channels
MP-MQE-W-F
nn Universal: few parts for a wide range of applications
Material composition S235JR as per DIN EN 10025
nn Medium-duty load range
Surface Finish Hot dip galvanized 56 µm
Medium duty
System MQ
1
04)+'* 2
HDG
)UHF N1 )UHF N1
Stainless Steel
Medium duty
System MQ
04+'*SOXV
)UHF N1 )UHF N1
3
04)+'*
System MI
)UHF N1 )UHF N1
HDG
Fixed points
System MQ
and sliders
04+'*SOXV
)UHF N1 )UHF N1
Order designation Weight Thickness Tightening torque Sales Quantity Item Number
Airconditioning
and Ventilation
System MQ
page 113
System MQ Hot Dipped Galvanized
Rail support
and Technical
MP-MQE-P-F
PC Software
Information
Medium duty
System MM
Light duty
Medium duty
System MQ
nn Medium- to heavy-duty load range Material composition S235JR as per DIN EN 10025
Surface Finish Hot dip galvanized 56 µm
Hilti Pipe Rings
04)+'*
HDG
)UHF N1
$
Stainless Steel
Medium duty
[
System MQ
04+'*SOXV
)UHF N1
Order designation Weight Thickness Tightening torque Sales Quantity Item Number
System MI
System MQ
Firestop systems
page 114
System
Moving MQ Hot hot-dip
components Dippedgalvanised
Galvanized
and Technical
PC Software
Information
Features:
■ For use suspended or standing without conversion
■ Coordinated loading classes suitable for Hilti pipe rings
■ Temperature resistant up to 300°C as no parts are of plastic.
■ Stiffened base plate suitable for MQ channel installation system
■ Slide can not pull out.
Medium duty
System MM
Light duty
Smooth rolling on coated rollers. Large movement: MRG 2-F up to
Technical data: Coefficient of friction: µ0=0.15 80 mm, MRG-D6-F up to 116 mm.
Galvanising: hot-dip galvanised, min. 45 µm Center mark for setting to zero.
Delivery without nut, washer or bolt
Medium duty
11,5 x 20
System MQ
MRG 2-F roll connector (HDG) MRG 2-F
Medium duty
System MQ
MRG-D6-F double roll connector (HDG)
HDG
Two connection bosses 90
Connection boss/ Frec Max. displacement Max. displacement Packaging Ordering Item no.
double thread (kN) axial (mm) transverse (mm) contents (pcs) designation
13,5 x 20
M12 / M16 6.0 116 – 5 MRG-D6-F 304214
Stainless Steel
MRG-D6-F mm mm
Medium duty
System MQ
58 16
n ± nt 1
ctio e
e fle cem
d la
x. isp
ma ax. d
m 159
System MI
219
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page
page115
23
System MQ Hot Dipped Galvanized Fixed points hot-dip galvanised
S M16
System MM
Light duty
If the force at the fixed point is greater than 10 kN, weld stops on the bracing side of the pipe.
Pipe size Dimensions Packaging Ordering Item no.
(mm) (inch) D [mm] S [mm] B [mm] contents (pcs) designation
100 108-112 8 231.4 6 MFP-NW 100 M20-F 304241
4″ 110-115 8 234.6 6 MFP-4″ M20-F 304242
125/127 125-127 8 245.1 6 MFP-NW 125/127 M20-F 304243
125 5″ 133-140 8 262.0 6 MFP-125 M20-F 304244
Medium duty
System MQ
M L
Medium duty
System MQ
System MQ
Firestop systems
MFP 1-F
MFP 1-F fixed
fixed point
point set
set (HDG)
(HDG) MFP-NW…-F
MFP-NW…-F
and Technical
PC Software
Information
hot-dipgalvanised,
hot-dip galvanised,min.
min.45
45µm
µm HST-RM12
HST-R M12
uptotoFFrecrec33kN
up kN Bracingset
Bracing set
Ordering
Ordering Packaging
Packaging Itemno.
Item no.
designation
designation contents(pcs)
contents (pcs) 1 11/41"-F
/4"-F
asper
ringas
MFP-F-pipring
MFP-F-pip perdesired
desiredpipe
pipesize
size MM16-F
16-F
MFP-BP20-F
MFP-BP 20-F
MFP-BP20-F
MFP-BP basicset
20-Fbasic set 11 304252
304252 HH
MFP-AP bracingset
1-Fbracing
MFP-AP1-F set 11 304253
304253 HST-RM16
HST-R M16
AM16-F
AM 16-F
Medium duty
System MM
MM20-F
20-F
Light duty
DD
ireirct
ectioio
n nofofo
f fo
rcrc
ee
Fre
Fre cc
MFP-AP1-F
MFP-AP 1-F
(totop
(to topside
sideofofpipe)
pipe) M16-F
M16-F
HHminmin ==170
170mmmm (80Nm)
(80 Nm)
HHmaxmax==1200
1200mm mm
Medium duty
System MQ
MFP 1a-F
MFP 1a-F fixed
fixed point
point set
set (HDG)
(HDG) MFP-NW…-F
MFP-NW…-F
HST-RM12
HST-R M12
hot-dipgalvanised,
hot-dip galvanised,min.
min.45
45µm
µm
uptotoFFrecrec33kN
up kNwithout
withoutbracing
bracing
Ordering
Ordering Packaging
Packaging Itemno.
Item no.
FF
rere
cc
22
(totop
(to topside
sideofofpipe)
pipe)
00 HHminmin ==140
140mmmm
Medium duty
M16-F
M16-F
System MQ
HHmaxmax==800
800mmmm
140
200
300
400
500
600
700
800
140
200
300
400
500
600
700
800
(80Nm)
(80 Nm)
HDG
Supportheight
Support heightHH[mm]
[mm]
MFP 2-F
MFP 2-F fixed
fixed point
point set
set (HDG)
(HDG) MFP-NW…-F
MFP-NW…-F
(internationalversion)
(international version)
Stainless Steel
HST-RM12
HST-R M12
Medium duty
System MQ
hot-dipgalvanised,
hot-dip galvanised,min.
min.45
45µm
µm MM16-F
16-F
up 10kN
uptotoFFrecrec10 kN HH
/4"-F
1 11/41"-F
Ordering
Ordering Packaging
Packaging Itemno.
Item no.
designation
designation contents(pcs)
contents (pcs)
HST-RM16
HST-R M16
AM16-F
AM 16-F MFP-BP20-F
MFP-BP 20-F
MFP-Fpipe asper
ringas
pipering perdesired
desiredpipe
pipesize
size
MM20-F
20-F
MFP-F Dire
Dire ctn
ctio ion
Fre
ofof
Fre
fofo
rcrc
ee
basicset
set 11
cc
MFP-BP 20-Fbasic
MFP-BP20-F 304252
304252
MFP-AP2-F
MFP-AP bracingset
2-Fbracing set 11 376022
376022
System MI
MM16-F
16-F
(80Nm)
(80 Nm)
MFP-AP2-F
MFP-AP 2-F
HDG
(totop
(to topside
sideofofpipe)
pipe)
HHminmin ==140
140mmmm
HHmaxmax==1200
1200mm mm
Fixed points
System MQ
and sliders
MFP 3-F
MFP 3-F fixed
fixed point
point set
set (HDG)
(HDG) (inter-
(inter- HST-RM12
HST-R M12
MFP-NW…-F
MFP-NW…-F
nationalversion)
national version)
hot-dipgalvanised,
hot-dip galvanised,min.
min.45
45µm
µm "-F
11141"4-F
uptotoFFrecrec20
up 20kN
kN HH
Airconditioning
and Ventilation
AM16-F
AM16-F
designation
designation contents(pcs)
contents (pcs)
DD
ireirct
MFP-Fpipe
MFP-F asper
ringas
pipering perdesired
desiredpipe
pipesize
size ectioio
n nofofo
Fre
Fre
f fo
rcrc
ee
basicset
MFP-BP16-Fbasic
MFP-BP16-F set 11 304255
304255
cc
MFP-AP3-F
MFP-AP bracingset
3-Fbracing set 11 304257
304257
Heightadjustment
Height adjustment
sleeve
sleeve M16-F
M16-F
(withcheck
(with checkbore)
bore)
Givenloads
Given loadsonly
onlyapply
applyififHilti
HiltiHST-R
HST-Ranchors
anchorsare
areused.
used. (80Nm)
(80 Nm)
MFP-AP3-F
MFP-AP 3-F
Firestop systems
IfIfthe
thedirection
directionofofforce
forceisisnot
notknown,
known,ororchanging,
changing,the
thefixed
fixedpoint
pointmust
mustbe
be
bracedon
braced onboth
bothsides.
sides. (topipe
(to pipecentreline)
centreline)
IfIfthe
theforce
forceatatthe
thefixed
fixedpoint
pointisisgreater
greaterthan
than10
10kN,
kN,weld
weldstops
stopson
onthe
the HHminmin ==140
140mm
mm
bracingside
bracing sideofofthe
thepipe
pipe HHmaxmax==1200
1200mm
mm
page26
page 26 page 117
System MQhot-dip
Pipe rings Hot Dipped Galvanized
galvanised
Use:
■ In humid inside rooms (moderate condensation)
■ Outside in medium-corrosive surroundings
Benefits:
■ Solid welded-on connection boss.
Medium duty
System MM
Technical data:
Max. static load recommended for suspensions:
MP-MI-F / -M-F 1/2″ up to 3″ diameter Frec = 3000N
Medium duty
System MQ
b
Stainless Steel
Medium duty
System MQ
MP-MI-F (HDG)
Hot-dip galvanised pipe ring with metric connection boss and insulating inlay as per DIN 4109
Size Clamping Connection thread/ Clamping Dimensions Packaging Ordering Item no.
[mm/inch] range width across flats bolts B [mm] bxs [mm] h [mm] b1 [mm] contents (pcs) designation
D (mm)
/2″
1
20-25 M10/SW17 M8 69 24x2 28 21 25 MP-MI-F 1/2″ M10 304258
3
/4″ 25-30 M10/SW17 M8 75 24x2 30 21 25 MP-MI-F 3/4″ M10 304259
System MI
System MQ
Size Clamping Connection thread/ Clamping Dimensions Packaging Ordering Item no.
[mm/inch] range width across flats bolts B [mm] bxs [mm] h [mm] b1 [mm] contents (pcs) designation
D (mm)
/2″
1
20-25 M10/SW17 M8 69 24x2 25 21 25 MP-M-F 1
/2″ M10 304269
3
/4″ 25-30 M10/SW17 M8 75 24x2 28 21 25 MP-M-F 3
/4″ M10 304270
1″ 32-38 M10/SW17 M8 83 24x2 32 21 25 MP-M-F 1″ M10 304271
11/4″ 40-45 M10/SW17 M8 92 24x2 35 21 25 MP-M-F 11/4″ M10 304272
11/2″ 48-54 M10/SW17 M8 101 24x2 39 21 25 MP-M-F 11/2″ M10 304273
Firestop systems
page 118
page 28
System MQrings
Pipe Hot hot-dip
Dippedgalvanised
Galvanized
and Technical
PC Software
Information
for „extra“ heavy duty installations exposed to moderate corrosiveness
Fields of applications:
■ Industrial pipe fitting
■ Mechanical installations
■ Process and control lines
■ heavy-duty pipe runs
Medium duty
System MM
Light duty
Benefits:
■ Solid connection boss, welded all round
■ Strong clamping bolts for high loads
■ Non-slip, pre-fitted profiled rubber inlay
■ Suitable for the installation of pipes under dynamic loading if used
with vibration damping components.
Medium duty
System MQ
Technical data:
Max permissible load for suspensions:
up to 3″ max. Frec = 6000 N
Acoustic Building
from 4″ up to 274 mm diameter max. Frec = 10000 N insulation material class
B2
s
from 324 up to 406 mm diameter max. Frec = 15000 N
ice
for DIN 4109
erv
„Normal flammability“
S
from 457 up to 508 mm diameter max. Frec = 17000 N inspected TESTED
ce
as per DIN 4102
fen
De
Pipe ring material: STW 22 steel as per DIN EN 10111 (HDG 45 µm)
AC Laboratory, Spiez
Firestop
Rubber inlay material: EPDM
Temperature resistance: –50°C to +120°C
Shore A hardness: 50° ± 5° Shore-A
Noise reduction: Δ LA = 16 dB (A)
Medium duty
System MQ
HDG
Recommended guide values for dynamic loading
of MP-MXI-F/MP-MX-F
M16 connection boss, 3
/4″ connection boss, 1″ connection boss,
(max. Frec 6000 N) (max. Frec 10000 N) (max. Frec 10000 N)
Stainless Steel
Medium duty
System MQ
from pipe size 4″ (108 mm) up to 274 mm from pipe size 2″ (60 mm) up to 133 mm from pipe size 5″ (137 mm) up to 274 mm
δ L L L L L L δ L L L L L L δ L L L L L L
mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm mm 100 mm 200 mm 300 mm 400 mm 500 mm 1000 mm
0.5 ● ● ● ● ● ● 0.5 ● ● ● ● ● ● 0.5 ● ● ● ● ● ●
1 – ● ● ● ● ● 1 – ● ● ● ● ● 1 – ● ● ● ● ●
1.5 – ● ● ● ● ● 1.5 – ● ● ● ● ● 1.5 – ● ● ● ● ●
2 – ● ● ● ● ● 2 – – ● ● ● ● 2 – – ● ● ● ●
4 – – ● ● ● ● 4 – – – ● ● ● 4 – – – ● ● ●
System MI
6* – – – – ●* ● 6 – – – – ● ● 6 – – – – ● ●
HDG
8 – – – – ● ● 8 – – – – ● ● 8 – – – – ● ●
10 – – – – ● 10 – – – – – ● 10 – – – – ●
The determined values apply only if the The determined values apply only if the The determined values apply only if the
MFP-GP16-F base plate and M16 threaded MFP-GP 3/4″-F base plate and GR-G 3/4″-F MFP-GP1″-F base plate and GR-G1″-F
rod of the 8.8 grade are used. threaded pipe are used. threaded pipe are used.
Fixed points
System MQ
and sliders
L
* Example: Is the shown pipe fastening resistant to dynamic fatigue stressing?
Airconditioning
and Ventilation
System MQ
Demand: Known: Threaded base plate with M16 connection and anchor approved for
tension zone. Distance between and ceiling or wall, L, 1500 mm.
Max. side movement caused by vibration, δ, in mm = 6 mm.
Result: Resistant to fatigue stressing (2×106 load cycles) allowing for dimension
L = min. 500 mm.
Firestop systems
page
page119
29
System MQhot-dip
Pipe rings Hot Dipped Galvanized
galvanised
MP-MXI-F (HDG)
and Technical
PC Software
Pipe ring with metric connection boss and insulating inlay as per DIN 4109
Information
M16 M10/M12
h
20
23
M 10
B
Medium duty
System MM
b
Light duty
Size Clamping range Connection Clamping Dimensions Packaging Ordering Item no.
[mm/inch] d [mm] thread bolts B [mm] s×b [mm] h [mm] contents (pcs) designation
2″ 60– 65 M10/M12 M10 142 3×30 64 25 MP-MXI-F 2″ M10/M12 374897
21/2″ 73– 78 M10/M12 M10 156 3×30 71 25 MP-MXI-F 21/2″ M10/M12 374898
3″ 88– 93 M10/M12 M10 172 3×30 78 25 MP-MXI-F 3″ M10/M12 374899
4″ 108–116 M16 M12 210 4×40 90 25 MP-MXI-F 4″ M16 374900
125 122–126 M16 M12 221 4×40 95 25 MP-MXI-F 125 M16 374901
Medium duty
System MQ
133 131–137 M16 M12 231 4×40 100 10 MP-MXI-F 133 M16 374902
5″ 139–144 M16 M12 238 4×40 104 10 MP-MXI-F 5″ M16 374903
159 159–166 M16 M12 261 4×40 115 10 MP-MXI-F 159 M16 374904
6″ 163–170 M16 M12 265 4×40 117 10 MP-MXI-F 6″ M16 374905
177,8 177–182 M16 M16 284 4×40 123 10 MP-MXI-F 177,8 M16 374906
193,7 192–200 M16 M16 303 4×40 132 10 MP-MXI-F 193,7 M16 374907
210 210–218 M16 M16 321 4×40 141 10 MP-MXI-F 210 M16 374908
Hilti Pipe Rings
219 219–228 M16 M16 330 4×40 146 10 MP-MXI-F 219 M16 374909
244,5 244–253 M16 M16 355 4×40 158 10 MP-MXI-F 244,5 M16 374910
267/274 267–274 M16 M16 375 4×40 167 10 MP-MXI-F 267/274 M16 374911
275 275–282 M16 M16 384 4×40 173 10 MP-MXI-F 275 M16 374912
324 315–324 M16 M16 441 5×50 190 1 MP-MXI-F 324 M16 374913
326 325–330 M16 M16 445 5×50 192 1 MP-MXI-F 326 M16 374914
355 348–356 M16 M16 471 5×50 205 1 MP-MXI-F 355 M16 374915
368 364–372 M16 M16 488 5×50 213 1 MP-MXI-F 368 M16 374916
Medium duty
System MQ
406 400–409 M16 M16 525 5×50 232 1 MP-MXI-F 406 M16 374917
HDG
457 454–462 M16 M16 586 6×70 259 1 MP-MXI-F 457 M16 374918
508 500–508 M16 M16 632 6×70 282 1 MP-MXI-F 508 M16 374919
h
M16 M10/M12
S 20
23
M 10
B
System MI
Size Clamping range Connection Clamping Dimensions Packaging Ordering Item no.
HDG
[mm/inch] d [mm] thread bolts B [mm] s×b [mm] h [mm] contents (pcs) designation
2″ 60– 65 M10/M12 M10 132 3×30 60 25 MP-MX-F 2″ M10/M12* 374943
21/2″ 73– 78 M10/M12 M10 146 3×30 67 25 MP-MX-F 21/2″ M10/M12* 374944
3″ 88– 93 M10/M12 M10 161 3×30 74 25 MP-MX-F 3″ M10/M12* 374945
4″ 108–116 M16 M12 198 4×40 84 25 MP-MX-F 4″ M16* 374946
125 122–128 M16 M12 210 4×40 89 25 MP-MX-F 125 M16* 374947
Fixed points
System MQ
and sliders
133 132–138 M16 M12 221 4×40 94 10 MP-MX-F 133 M16* 374948
5″ 139–144 M16 M12 226 4×40 98 10 MP-MX-F 5″ M16* 374949
159 159–166 M16 M12 249 4×40 109 10 MP-MX-F 159 M16* 374950
6″ 163–170 M16 M12 253 4×40 111 10 MP-MX-F 6″ M16* 374951
177,8 177–182 M16 M16 272 4×40 117 10 MP-MX-F 177,8 M16* 374952
193,7 192–200 M16 M16 290 4×40 126 10 MP-MX-F 193,7 M16* 374953
210 210–218 M16 M16 309 4×40 135 10 MP-MX-F 210 M16* 374954
Airconditioning
and Ventilation
219 219–228 M16 M16 318 4×40 140 10 MP-MX-F 219 M16* 374955
System MQ
244,5 244–253 M16 M16 343 4×40 152 10 MP-MX-F 244,5 M16* 374956
267/274 267–274 M16 M16 363 4×40 162 10 MP-MX-F 267/274 M16* 374957
275 275–282 M16 M16 372 4×40 167 10 MP-MX-F 275 M16* 374958
324 315–324 M16 M16 429 5×50 184 1 MP-MX-F 324 M16* 374959
326 325–330 M16 M16 433 5×50 186 1 MP-MX-F 326 M16* 374960
355 348–356 M16 M16 460 5×50 199 1 MP-MX-F 355 M16* 374961
Firestop systems
368 364–372 M16 M16 476 5×50 207 1 MP-MX-F 368 M16* 374962
406 400–409 M16 M16 514 5×50 226 1 MP-MX-F 406 M16* 374963
457 454–462 M16 M16 574 6×70 253 1 MP-MX-F 457 M16* 374964
508 500–508 M16 M16 620 6×70 276 1 MP-MX-F 508 M16* 374965
* Available on request
page 120
page 30
System MQ Hot Dipped Galvanized
Threaded rod
and Technical
PC Software
Information
Technical data
Medium duty
System MM
Light duty
Ordering
Thread diameter Length Order designation Sales Quantity Item Number
Medium duty
System MQ
M12 2m Threaded rod AM12x2000-F 4.8 15 pc 00304775
M16 2m Threaded rod AM16x2000-F 4.8 5 pc 00304777
M20 2m Threaded rod AM20x2000-F 4.8 5 pc 00304779
Technical data
Medium duty
System MQ
GR-G
HDG
Surface Finish Hot dip galvanized
Material composition Steel grade 4.6
Additional product information Pipe (semi-finished product):
DIN 2440/78
Stainless Steel
Medium duty
System MQ
Ordering
Thread diameter Length Order designation Sales Quantity Item Number
System MI
HDG
Hexagon screw Fixed points
System MQ
and sliders
Technical data
Ordering
Thread diameter Thread length Wrench size Order designation Sales Quantity Item Number
page 121
System MQ Hot Dipped Galvanized
Hexagon nut
and Technical
PC Software
Information
Technical data
Ordering
Thread diameter Wrench size Order designation Sales Quantity Item Number
Flat washer
Hilti Pipe Rings
Technical data
Ordering
Inside diameter Outside Thickness Additional product information Order designation Sales Quantity Item Number
diameter
8.4 mm 16 mm 1.6 mm According DIN 125 / Form A Flat washer A 8,4/16-F 100 pc 00304769
Stainless Steel
Medium duty
System MQ
10.5 mm 20 mm 2 mm According DIN 125 / Form A Flat washer A 10,5/20-F 100 pc 00304770
13 mm 24 mm 2.5 mm According DIN 125 / Form A Flat washer A 13/24-F 100 pc 00304771
17 mm 30 mm 3 mm According DIN 125 / Form A Flat washer A 17/30-F 100 pc 00304772
System MI
HDG
Technical data
System MQ
Ordering
Thread diameter Length Order designation Sales Quantity Item Number
page 122
System MQ Channel Installation
Stainless Steel
Hilti. Outperform. Outlast.
System MQ Stainless Steel
Description Pages
Brackets 130
page 125
System
SystemMQ
MQ Stainless Steel
channel installation stainless steel
2.5
Definition of axes
82.6
2
52
2
41.2
F F
41.3
20.6
e2 e1 41.3 41.3
41.3 41.3 41.3
y-axis
e1 e2
"open" z-axis
System MM
Light duty
Channel wall thickness t [mm] 2.0 2.0 2.0 2.0 2.5 2.0 2.0 2.0
Cross-sectional area A [mm2] 165.3 165.3 245.1 245.1 352.1 330.6 330.6 490.3
Channel weight [kg/m] 1.45 1.47 2.09 2.12 3.00 2.92 2.96 4.27
Delivered length [m] 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6
Material
Permissible stress σperm. [N/mm2] 142.9 155.8 142.9 155.8 155.8 142.9 155.8 155.8
Stainless steel A2 (1.4301) ● ● ●
Medium duty
System MQ
Section modulus "open" Wy1 [cm3] 0.85 0.85 2.54 2.54 4.28 2.42 2.42 7.43
Section modulus Wy2 [cm3] 0.94 0.94 2.66 2.66 4.50 2.42 2.42 7.43
Radius of gyration iy [cm] 0.74 0.74 1.48 1.48 1.80 1.23 1.23 2.50
Permissible moment 2) My [Nm] 121 132 363 396 666 346 377 1158
Z-axis
Moment of inertia Iz [cm4] 4.39 4.39 7.33 7.33 10.79 8.78 8.78 14.67
Section modulus Wz [cm3] 2.13 2.13 3.55 3.55 5.23 4.25 4.25 7.10
Medium duty
Radius of gyration iz [cm] 1.63 1.63 1.73 1.73 1.75 1.63 1.63 1.73
System MQ
● The given data is based on a single span (simply-supported beam) bearing a single load, F (kN), at mid-span, L/2.
● If several loads are acting on a single span (simply-supported beam), these may be summated and regarded as a single load acting at mid span. By taking this
approach, the design calculation is on the safe side. (➔ Cross section selection table).
● The permissible stress in the steel and the max. deflection, L/200, are not exceeded with the given max. span width, L (cm).
● The channel's own weight was taken into account.
Max. span width, L (cm) / deflection, f (mm) 3)
Stainless Steel
Medium duty
L f L f L f L f L f L f L f L f
System MQ
F (kN) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm) (cm) (mm)
0.25 120 6.0 120 6.0 277 13.8 277 13.8 380 19.0 261 13.1 261 13.1 560 28.0
0.50 86 4.3 86 4.3 204 10.2 204 10.2 290 14.5 195 9.7 195 9.7 449 22.5
0.75 64 2.7 70 3.4 168 8.4 168 8.4 242 12.1 161 8.1 161 8.1 383 19.2
1.00 48 1.5 52 1.9 143 6.8 147 7.3 212 10.6 135 6.3 141 7.0 339 16.9
1.25 39 <1 42 1.2 115 4.4 125 5.7 190 9.5 109 4.1 119 5.3 307 15.3
1.50 32 <1 35 <1 96 3.1 105 4.0 174 8.7 91 2.9 99 3.7 282 14.1
System MI
1.75 27 <1 30 <1 83 2.3 90 3.0 150 6.5 78 2.1 85 2.7 257 12.3
HDG
2.00 24 <1 26 <1 72 1.8 79 2.3 132 5.0 69 1.6 75 2.1 226 9.6
2.25 21 <1 23 <1 64 1.4 70 1.8 118 4.0 61 1.3 67 1.7 202 7.7
2.50 19 <1 21 <1 58 1.1 63 1.5 106 3.3 55 1.1 60 1.4 182 6.3
2.75 17 <1 19 <1 53 <1 57 1.2 96 2.7 50 <1 55 1.1 166 5.3
3.00 16 <1 17 <1 48 <1 53 1.0 88 2.3 46 <1 50 <1 153 4.4
Fixed points
System MQ
and sliders
3.50 14 <1 15 <1 41 <1 45 <1 76 1.7 39 <1 43 <1 131 3.3
4.00 12 <1 13 <1 36 <1 39 <1 66 1.3 34 <1 38 <1 115 2.5
4.50 10 <1 11 <1 32 <1 35 <1 59 1.0 31 <1 33 <1 102 2.0
5.00 9 <1 10 <1 29 <1 32 <1 53 <1 27 <1 30 <1 92 1.6
6.00 8 <1 8 <1 24 <1 26 <1 44 <1 23 <1 25 <1 77 1.1
7.00 6 <1 7 <1 21 <1 22 <1 38 <1 19 <1 21 <1 66 <1
Airconditioning
and Ventilation
System MQ
permissible span width (tabluated value) is larger or equal 1 kN 100 100 1000 – F
page 126
page 34
System MQ channelSystem MQ stainless
installation Stainless steel
Steel
System MQ channel installation stainless steel
Load, F (kN)
Channel
Channel selection
selection diagram
diagram
Load,
25.00 F (kN)
25.00
and Technical
(stainless steel)
PC Software
Information
(stainless steel)
Single
Single span
span 20.00
(simply
(simply supported)
supported)
20.00
Medium duty
deflection of L/200.
System MM
deflection of L/200.
Light duty
MQ-52-R
MQ-52-R
10.00
F[kN]
F[kN]
10.00
MQ-41-R
®
®
MQ-41-R
Stainless
Stainless 5.00
steel 5.00
L/2
L/2 L/2
L/2
steel MQ-41-RA2
MQ-41-RA2
MQ21-R
MQ21-R
Medium duty
System MQ
L[cm]
L[cm] MQ-21-RA2
MQ-21-RA2
0.00
0.00 0 25 50 100 150 200 250 300
0 25 50 100 150 200 250 300
Span
Span width
width (cm)
(cm)
Load,FF(kN)
Load, (kN)
30.00
30.00
20.00
20.00
MQ-41D-R
MQ-41D-R
Medium duty
System MQ
15.00
15.00
HDG
10.00
10.00
Stainless Steel
MQ-21D-R
MQ-21D-R
Medium duty
System MQ
5.00
5.00
MQ-21D-RA2
MQ-21D-RA2
0.00
0.00
00 25
25 100
100 200
200 300
300 400
400 500
500 600
600
Span width
Span (cm)
width (cm)
Channel selection
selection table (stainless
(stainless steel)
System MI
Channel steel)
HDG
Singlespan
Single span(simply
(simplysupported)
supported)
withsingle
with singleload
loadat
atmid
midspan,
span, L/2
L/2
F[kN] 2 2
2.5
F[kN]
2.5
22
82.6
82.6
2
2
52
Fixed points
41.2
22
41.3
System MQ
and sliders
L/2 L/2
52
41.2
41.3
L/2 L/2
20.6
20.6
L[cm]
L[cm] 41.3 41.3
41.3
41.3
41.3
41.3
41.3
41.3
41.3
41.3
Max. load,
Max. load, FF (kN)
(kN) // deflection,
deflection, ff (mm)
(mm)
MQ-21-RA2 MQ-21-R MQ-41-RA2 MQ-41-R MQ-52-R MQ-21D-RA2 MQ-21D-R MQ-41D-R
MQ-21-RA2 MQ-21-R MQ-41-RA2 MQ-41-R MQ-52-R MQ-21D-RA2 MQ-21D-R MQ-41D-R
Span width F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm)
Span width F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm) F (kN) f (mm)
L (cm) max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200
L (cm) max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200 max. L/200
25 1.92 <1 2.10 <1 5.77 <1 6.29 <1 10.59 <1 5.48 <1 5.98 <1<1 18.36
18.36 <1<1
Airconditioning
and Ventilation
25 1.92 <1 2.10 <1 5.77 <1 6.29 <1 10.59 <1 5.48 <1 5.98
System MQ
50
50 0.96
0.96 1.6
1.6 1.05
1.05 1.8
1.8 2.90
2.90 <1
<1 3.16
3.16 <1
<1 5.32
5.32 <1
<1 2.75
2.75 <1
<1 3.00
3.00 <1<1 9.23
9.23 <1<1
75
75 0.64
0.64 3.6
3.6 0.66
0.66 3.8
3.8 1.93
1.93 1.9
1.9 2.10
2.10 2.0
2.0 3.54
3.54 1.6
1.6 1.83
1.83 1.9
1.9 2.00
2.00 2.1
2.1 6.15
6.15 1.0
1.0
100 0.37 5.0 0.37 5.0 1.44 3.3 1.57 3.6 2.65 2.9 1.37 3.4 1.49 3.7 4.61 1.9
100 0.37 5.0 0.37 5.0 1.44 3.3 1.57 3.6 2.65 2.9 1.37 3.4 1.49 3.7 4.61 1.9
125 0.23 6.3 0.23 6.3 1.15 5.2 1.25 5.7 2.11 4.5 1.09 5.3 1.19 5.8 3.68 2.9
125 0.23 6.3 0.23 6.3 1.15 5.2 1.25 5.7 2.11 4.5 1.09 5.3 1.19 5.8 3.68 2.9
150 0.15 7.5 0.15 7.5 0.95 7.5 0.95 7.5 1.75 6.5 0.88 7.5 0.88 7.5 3.06 4.2
150 0.15 7.5 0.15 7.5 0.95 7.5 0.95 7.5 1.75 6.5 0.88 7.5 0.88 7.5 3.06 4.2
175 0.11 8.8 0.11 8.8 0.69 8.8 0.69 8.8 1.49 8.8 0.63 8.8 0.63 8.8 2.61 5.7
Firestop systems
175 0.11 8.8 0.11 8.8 0.69 8.8 0.69 8.8 1.49 8.8 0.63 8.8 0.63 8.8 2.61 5.7
200 0.08 10.0 0.08 10.0 0.52 10.0 0.52 10.0 1.13 10.0 0.47 10.0 0.47 10.0 2.27 7.4
200 0.08 10.0 0.08 10.0 0.52 10.0 0.52 10.0 1.13 10.0 0.47 10.0 0.47 10.0 2.27 7.4
225 0.05 11.3 0.05 11.3 0.40 11.3 0.40 11.3 0.88 11.3 0.36 11.3 0.36 11.3 2.01 9.4
225 0.05 11.3 0.05 11.3 0.40 11.3 0.40 11.3 0.88 11.3 0.36 11.3 0.36 11.3 2.01 9.4
275 0.02 13.8 0.02 13.8 0.25 13.8 0.25 13.8 0.56 13.8 0.22 13.8 0.22 13.8 1.58 13.8
275 0.02 13.8 0.02 13.8 0.25 13.8 0.25 13.8 0.56 13.8 0.22 13.8 0.22 13.8 1.58 13.8
300 0.01 15.0 0.01 15.0 0.20 15.0 0.20 15.0 0.46 15.0 0.17 15.0 0.17 15.0 1.31 15.0
300 0.01 15.0 0.01 15.0 0.20 15.0 0.20 15.0 0.46 15.0 0.17 15.0 0.17 15.0 1.31 15.0
page
page127
page 35
35
System MQ channel installation stainless steel
System MQ Stainless Steel
Type of load 1: uniform Type of load 2: single Type of load 3 Type of load 4 Type of load 5
F1 F1 F2 F2 F3 F3 F3
F1 = q · i 1/
2
1/2 1/3 1/3 1/3 1/4 1/4 1/4 1/4
System MM
Light duty
MQK-21/450-R 450 400 400 570 570 150 150 250 250 150 150
MQK-41/300-R 300 2620 2620 2620 2620 1310 1310 1310 1310 870 870
MQK-41/450-R 450 1740 1740 1740 1740 870 870 870 870 580 580
MQK-41/600-R 600 1300 1300 1300 1300 500 500 650 650 430 430
MQK-21 D/450-R 450 1650 1650 1650 1650 830 830 820 820 550 550
MQK-41 D/750-R 750 3050 1890 3050 1890 1520 940 1520 940 1010 630
Loading capacity of the bracket (steel loading capacity) or with HVZ-R M12 fastening, the loading capacity of the bracket is reached with the HVZ-R M12.
Medium duty
1)
System MQ
Loading capacity of the bracket with HST-R fastening, alternatively, loading values with HIT-RTZ M12 are at least those with HST-R M12.
2)
The application guidelines in anchor approvals must be observed. Loading values according to approval status July 2005.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
Rost
Stainless Rost
Stainless
frei
steel frei
steel
Medium duty
System MQ
HDG
Technical data for brackets with angle brace (stainless steel A5)
Type of load 1: uniform Type of load 2: single Type of load 3 Type of load 4 Type of load 5
Stainless Steel
Medium duty
F1 F1 F2 F2 F3 F3 F3
System MQ
Separate verification must be provided that forces are transferred to the respective base material, i.e. steel and concrete.
The application guidelines in anchor approvals must be observed. Loading values according to approval status July 2005.
The deflection (deformation) of L/150 was observed in all cases, this being measured at the point of load application.
Airconditioning
and Ventilation
System MQ
Firestop systems
page 128
page 36
page 129
System MQ Stainless Steel
page 130
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
System MQ channelSystem MQ stainless
installation Stainlesssteel
Steel
Channel nut
and Technical
PC Software
Information
Features:
■ Simple, compact, time saving.
■ Single part which can be prefitted.
■ Easy to use.
■ Universal: one and the same nut for all channels.
Medium duty
System MM
Light duty
Technical data:
Medium duty
Material: Stainless steel
System MQ
®
Pushbutton Stainless
steel
Medium duty
System MQ
Rec. tensile load, Rec. shear load, Tightening torque
Zrec (kN) Qrec (kN) MD (Nm)
HDG
Item Channel I Channel II IBMB no. 3897/1802-5
Stainless Steel
Medium duty
System MQ
System MI
HDG
®
and sliders
page
page131
39
System
System MQ
System MQ Stainless
MQ channel Steel
channel installation
installation stainless
stainless steel
steel
Features:
■ Single part, simple and time-saving in use.
■ For all types of channels.
■ For threaded rods from M8 to M16.
Medium duty
System MM
Light duty
Technical data:
Medium duty
Stainless
Stainless
steel
steel
M
M 88
Nut: 1.4581 as per DIN EN 10 283 M10
M10
Plate: 1.4401 (A4) as per DIN 17 440 M12
M12
Hilti Pipe Rings
M16
M16
Plastic: PB
Connection
Connection Weight
Weight Packaging
Packaging Outside
Outside packaging
packaging Ordering
Ordering Item
Itemno.
no.
thread
thread each
each (g)
(g) contents
contents (pcs)
(pcs) contents
contents (pcs)
(pcs) designation
designation
M8 75 25 200 ➀
➀ MQA-M
MQA-M 8-R
8-R 304021
304021
M10 73 25 200 ➁
➁ MQA-M10-R
MQA-M10-R 304022
304022
M12 71 25 200 ➁
➁ MQA-M12-R
MQA-M12-R 304023
304023
M16 84 25 200 ➁
➁ MQA-M16-R
MQA-M16-R 304024
304024
Medium duty
System MQ
Rec.
Rec. tensile
tensile load,
load, Tightening
Tightening torque
torque Bending
Bending moment,
moment,threaded
threaded
ZZrecrec (kN)
(kN) M
MDD (Nm)
(Nm) rod
rod A4-70
A4-70 (Nm)
(Nm) 1)1)
HDG
Item
Item Channel
Channel II Channel
Channel IIII
MQA-M 8-R 3.0 3.0 9 12.1
12.1
MQA-M10-R 5.0 7.0 18 24.1
24.1
MQA-M12-R 5.0 8.0 31 42.1
42.1
MQA-M16-R 5.0 8.0 40 100.0
100.0
Stainless Steel
IBMB
IBMB no.
no. 3897/1802-5
3897/1802-5
HDG
Connection
Connection Weight
Weight Packaging
Packaging Ordering
Ordering Item
Itemno.
no.
thread
thread each
each (g)
(g) contents
contents (pcs)
(pcs) designation
designation
Fixed points
System MQ
100
and sliders
100
M16 180 20 MQG-2-M16-R
MQG-2-M16-R 304028
304028
/22″
11
170 20 MQG-2-11//22″-R
MQG-2- ″-R 304029
304029
/44″
33
185 20 MQG-2-33//44″-R
MQG-2- ″-R 304030
304030
1″ 205 20 MQG-2-1″-R
MQG-2-1″-R 304031
304031
Rec.
Rec. tensile
tensile load,
load, Rec.
Rec. shearshear load,
load, Tightening
Tightening torque
torque Bending
Bendingmoment,
moment,
Item
Item ZZrecrec (kN)
(kN) QQrecrec (kN)
(kN) M
MDD (Nm)
(Nm) threaded
threadedrod
rodA4-70
A4-70 (Nm)
(Nm)
Airconditioning
and Ventilation
page 132
page
page 40
40
■ The MQN-R pushbutton can be prefitted.
Technical data:
Material: Stainless steel, 1.4571(A5)
Angles,
Material angle
thickness: brackets,
4 mm
and Technical
connectors
PC Software
Information
90º angle Stainless�
®�
➀
Features: 19
Frec 3.0 kN Frec 2.4 kN
steel 19.4
■ Univesal: few parts for all applications.
■ Easy to use. Weight Packaging Ordering Item no.
61 61
each (g) contents (pcs) designation
■ Three-dimensional, thus high strength. 35 10
Angle, 2 hole, 90°
■ The MQN-R pushbutton can be prefitted.
110 10 ➀ MQW-2-R 304051
Angle, 4 hole, 90° 220 10 ➁ MQW-4-R 304054
Medium duty
System MM
Angle, 8 hole, 90° 420 10 ➂ MQW-8/90°-R 304055
Light duty
Angle, 3 hole, 90° 160 10 ➃ MQW-3-R 304052
➁ Frec 5.0 kN Frec 3.7 kN
➂ Frec 9.0 kN Frec 5.0 kN
➃
Frec 6.8 kN Frec 2.5 kN
Technical data: 61
Medium duty
Material thickness: 4 mm
System MQ
55 105
90º angle
®�
➀
Stainless � Frec 3.0 kN Frec 2.4 kN
steel
Frec 9.0 kN Frec 5.0 kN
45º angle
®�
56
61
Medium duty
System MQ
111
HDG
55 105
®�
� ➀ ➁
Angle bracket Stainless
steel
110 198
Stainless Steel
Frec 2.0 kN Frec 3.0 kN
Medium duty
Frec 2.0 kN Frec 3.0 kN
steel
198
System MQ
Angle bracket, one brace 460 10 ➀ MQW-S/1-R 304058
155
45°
118
100
System MI
56
HDG
®� ®� 167
� � ➀ ➁
Angle bracket
Connector, two dimensional Stainless
steel
Stainless
steel
110
Frec
198
9.0 kN
112 Frec 7.0 kN
Fixed points
Weight
Weight Packaging
Packaging Ordering
Ordering Item no.
System MQ
and sliders
each
each(g)
(g) contents (pcs)
contents (pcs) designation
designation
Frec
Frec
2.0 kN
2.0 kN
Frec
Frec
3.0 kN
3.0 kN
198
page 41
Airconditioning
and Ventilation
System MQ
®� 167
�
Connector, two dimensional Stainless
Firestop systems
steel
Frec 9.0 kN
112 Frec 7.0 kN
Weight Packaging Ordering Item no.
each (g) contents (pcs) designation
Connector, triple, two dimensional 602 10 MQV-3/2D-R 304034
page
page133
41
System
SystemMQ
MQStainless Steel
channel installation stainless steel
® 55
System MM
steel
Light duty
Frec 5.0 kN
45
Technical data:
Stainless Steel
Medium duty
112
Frec 9.0 kN
HDG
Stainless
Channel base steel
➀
A
Airconditioning
and Ventilation
105
Suitable for Weight Packaging Ordering Item no.
System MQ
20x14
Frec
Channel base firestop tested 8
150
100 200
page 134
page 42
page 135
System MQ Stainless Steel
page 136
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
page 137
System MQ Stainless Steel
page 138
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
*Version without acoustic insulation is also available
page 139
System MQ Stainless Steel
Material: 1.4401
Pipe rings
System MQ (A4)steel
stainless
Stainless stainless
Steel steel
Fits MP-MXRI / MP-MRI / MP-MR pipe rings with M16 or M12 boss and MFP-GP-R M16 and LI
3 3
Information
Stainless ∅a
/″
M16 plate
Base 30
3
4 43.5 15.5 28 34 25 MGA-R 3/4″ IG / M16 AG 376257
steel
Material: 1.4571 (A5) stainless steel
Version: Connection boss boss welded all round
109
MGL 2-R
[D] [mm] base
Connection boss
H a
[mm] plate
F [kN] A = 150 mm«light»
Max. load Shear load for
[kN] cont. (pcs)(A5),
Package Ordering Item no.
designation metric two-hole version 150 d 100
9 x 16
Version:
M16 hex.Spot-welded
16 connection
13.5 12.5 boss
2.0 25 MFP-GP-R M16 376258 30
Medium duty
System MM
3
H a×b FZrec Package Ordering Item no.
[mm] [mm] [mm] [kN] cont. (pcs) designation
3
The means of fastening to the base material, e. g. anchors, requires separate
The means of fastening to the base material, e.g. anchors,requires separate verification verification. H
M8 11 9×16 1.9 10 MGL 2-R-M8 246927 54
80
Adaptor
MGS 2-R base plate «standard» (A5),
I
d
Material: 1.4401version
(A4) stainless steel
Medium duty
11 x 18
metric two-hole
System MQ
40
Fits MP-MXRI / MP-MRI / MP-MR pipe rings with M16 or M12 boss and MFP-GP-R M16 and LI
Version: Spot-welded connection boss
MFP-GP-R 3/4″ base plates 4 L
d H a×b FZrec Package Ordering Item no. H
Outside Inside Wrench Length Outside Package LA
[mm] [mm] [mm] [kN] cont. (pcs) Ordering
designation Item no. 85
thread thread size L LA LI dia. contents designation A
M10
[A] 14
[I] 11×18
[SW] 2.0
[mm] [mm] [mm] [mm] 10
(pcs) MGS 2-R-M10 246931 120
M12 16
3
/4″ 11×18
30 3.0
39.5 11.5 28 34 10
25 MGS 2-R-M12
MGA-R 3
/4″ IG / M12 AG 247762
376256
M16 20
/4″ 11×18
30 3.5
43.5 15.5 28 34 10
25 MGS 2-R-M16
MGA-R /4″ IG / M16 AG 246932
376257
Hilti Pipe Rings
3 3
H
M8 11 9×16 1.9 10 MGL 2-R-M8 246927 54
HDG
80
HKD-SR HST-R
MGS 2-R base plate «standard» (A5), d
11 x 18
metric two-hole version 40
Stainless Steel
4
d H a×b FZrec Package Ordering Item no. H
[mm] [mm] [mm] [kN] cont. (pcs) designation 85
Hilti HIT
M10 14 11×18 2.0 HVZ-R
10 / HVA-R
MGS 2-R-M10 246931 120
HKD-SR HST-R
page 54
Airconditioning
and Ventilation
System MQ
page 140
page 54
System MQ Stainless Steel
Threaded rod
and Technical
PC Software
Information
Technical data
Medium duty
System MM
Light duty
Ordering
Thread diameter Length Order designation Sales Quantity Item Number
Medium duty
System MQ
M16 1m Threaded rod AM16x1000 A4-70 5 pc 00058683
M20 1m Threaded rod AM20x1000 A4-70 5 pc 00058688
M24 1m Threaded rod AM24x1000 A4-70 5 pc 00058689
HDG
Stainless Steel
Medium duty
System MQ
Hexagon screw
Technical data
System MI
Material composition Stainless steel A4-70
HDG
Additional product information According DIN 933
Ordering
Thread diameter Thread length Wrench size Order designation Sales Quantity Item Number
and sliders
Firestop systems
page 141
System MQ Stainless Steel
Hexagon nut
and Technical
PC Software
Information
Technical data
System MM
Light duty
Ordering
Thread diameter Wrench size Order designation Sales Quantity Item Number
Flat washer
Technical data
Ordering
Inside diameter Outside diameter Thickness Additional product information Order designation Sales Quantity Item Number
8.4 mm 16 mm 1.6 mm According DIN 125 / Form A Flat washer A 8,4/16 A4 50 pc 00058622
Stainless Steel
Technical data
Fixed points
System MQ
and sliders
Ordering
Thread diameter Length Order designation Sales Quantity Item Number
Airconditioning
and Ventilation
System MQ
page 142
Industrial Pipe and
Electrical Supports
Hot Dipped Galvanized
System MI Industrial Pipe and
Electrical Supports
Hot Dipped Galvanized
Hilti. Outperform. Outlast.
System MI - Industrial Pipe and Electrical Support
Description Pages
MI girder 148
MI accessories 162
MI / MQ connector 166
page 145
System MI - Industrial Pipe and Electrical Support Hilti MI industrial pipe support system
including torsion
PC Software
Information
Technical data
50
50
Medium duty
System MM
Light duty
90 120
25
25
90 s = 3.5 90 s=4
MI-90 MI-120
Material thickness s [mm] 3.5 4.0
Medium duty
System MQ
* The permissible stress is calculated from σD / γG/Q with γ = 1,4. σD results from higher yield strength due to cold forming in accordance with DAST-RILI016, issued 1992:
HDG
System MQ
Firestop systems
and Technical
F1 when f=L/200, F2 when f=L/300, F when σzul including the framing section’s own weight
PC Software
Information
MI-90, one single load
Einzellast
MI-120, one single load
Einzellast 50
F 50
F
Medium duty
L L 25
System MM
25
Light duty
90 s = 3.5
90 s=4
Length of F [kN] f [mm] F1 [kN] f [mm] F2 [kN] f [mm] Length of F [kN] f [mm] F1 [kN] f [mm] F2 [kN] f [mm]
span [mm] ≤ σzul ≤ L/200 ≤ L/300 span [mm] ≤ σzul ≤ L/200 ≤ L/300
250 58.75 < 0.1 – – – – 250 101.32 < 0.1 – – – –
500 30.75 0.3 – – – – 500 53.13 0.2 – – – –
750 20.67 0.8 – – – – 750 35.73 0.6 – – – –
1000 15.54 1.3 – – – – 1000 26.86 1.0 – – – –
Medium duty
System MQ
1250 12.43 2.1 – – – – 1250 21.50 1.6 – – – –
1500 10.34 3.0 – – – – 1500 17.90 2.3 – – – –
1750 8.85 4.1 – – – – 1750 15.32 3.1 – – – –
2000 7.72 5.4 – – – – 2000 13.38 4.0 – – – –
2250 6.85 6.8 – – – – 2250 11.87 5.1 – – – –
2500 6.14 8.4 – – 6.06 8.3 2500 10.66 6.3 – – – –
2750 5.56 10.2 – – 4.97 9.2 2750 9.66 7.7 – – – –
Medium duty
4750 3.10 30.8 2.31 23.8 1.45 15.8 4750 5.41 23.1 – – 3.60 15.8
System MQ
5000 2.90 34.2 2.05 25.0 1.27 16.7 5000 5.11 25.6 4.98 25.0 3.20 16.7
HDG
5250 2.70 37.8 1.82 26.3 1.11 17.5 5250 4.80 28.2 4.47 26.3 2.85 17.5
5500 2.60 41.6 1.61 27.5 0.97 18.3 5500 4.60 31.0 4.01 27.5 2.54 18.3
5750 2.50 45.5 1.44 28.8 0.85 19.2 5750 4.50 34.0 3.62 28.8 2.27 19.2
6000 2.30 49.7 1.28 30.0 0.74 20.0 6000 4.10 37.1 3.27 30.0 2.03 20.0
Stainless Steel
Medium duty
System MQ
Selection of framing section for single span with max. load when f < L/200 F[kN]
50.00
45.00 MI-90
MI-120
System MI
40.00 MQ-21 D/F*
HDG
MQ-41 D/F*
MQ-41/F*
35.00
MQ-52-72 D/F*
Load F (kN)
30.00
Fixed points
System MQ
and sliders
25.00
20.00
15.00
Airconditioning
and Ventilation
System MQ
10.00
5.00
0.00
Firestop systems
-5.00
0 500 1000 1500 2000 2500 3000
Length of span (mm)
*Technical data for the MQ System can be found in the Installations Systems main catalogue.
page 148
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
page 149
System MI - Industrial Pipe and Electrical Support
MI connectors:
and Technical
Cantilever connectors
PC Software
Information
Advantages
■ Fine adjustment in 5 mm increments for maximum flexibility.
■ Only four connecting screws required.
■ Keyed hold for optimum transmission of forces and moments.
■ Self-locking nuts for vibration-resistant screw connections
Medium duty
System MM
Light duty
Technical data
Material: S235 JRG2 as per DIN EN 10 025
Medium duty
Note
Designed for cantilever applications.
May be supported at only one end.
Hilti Pipe Rings
75
2x 2x
System MI
HDG
For girder type Weight per Ordering designation Item no. Package
set [kg] contents
MI-90 2.80 MIC-90-L-AP 305710 2
Airconditioning
and Ventilation
System MQ
Firestop systems
connectors:
MI connectors:
and Technical
connector
Pedestal connector
PC Software
Information
Advantages
Advantages
■ Fine adjustment
■ adjustment in
in 55 mm
mm increments
increments for
formaximum
maximumflexibility.
flexibility.
■ Keyed hold
■ hold for
for optimum
optimum transmission
transmission of
offorces
forcesand
andmoments.
moments.
Medium duty
System MM
Light duty
Technical data
data
Material: S235
S235JRG2
JRG2asasper
perDIN
DINEN
EN 10
10025
025
Medium duty
Galvanizing:
Galvanizing: Hot-dip
Hot-dipgalvanized
galvanized55
55µm
µm
System MQ
Pedestal connector
connector with
with connecting
connecting parts
parts
88
120
120
For
For girder
girder type
type Weight
Weightper
per Ordering
Orderingdesignation
designation Item
Itemno.
no. Package
Package
set
set[kg]
[kg] contents
contents
Items in
in set
set aus:
Set besteht
besteht aus: 220
220
2x
2x
Medium duty
75
75
System MQ
HDG
2x
2x
2x
2x
Stainless Steel
Medium duty
System MQ
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 14
page 14 page 151
System MI - Industrial Pipe and Electrical Support
page 152
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti MI industrial pipe support system
Hilti MI industrial pipe support system
Hilti MI industrial pipe support system
System MI - Industrial Pipe and Electrical Support
MI steel connectors:
MI
MI steel
steel connectors:
connectors:
Connection to steel beams B
and Technical
Connection
Connection to
to steel
steel beams
PC Software
BB
Information
beams
Advantages
Advantages
■ For connection to standard steel beams without drilling or welding.
Advantages
■■For connection
Suitable to standard
for connection steel beams
to flange or web.without drilling or welding.
■ For connection to standard steel beams without drilling or welding.
■■Suitable
For use for connection
with MI-GC-M12to flange
beam or web.
clamp.
■ Suitable for connection to flange or web.
■ For use with MI-GC-M12 beam clamp.
■ For use with MI-GC-M12 beam clamp.
Medium duty
System MM
Light duty
Technical data
Technical
Material: data S235 JRG2 as per DIN EN 10 025
Technical data
Material:
Galvanizing: S235 JRG2
Hot-dip as per DIN
galvanized EN 10 025
55 µm
Material: S235 JRG2 as per DIN EN 10 025
Medium duty
Galvanizing: Hot-dip galvanized 55 µm
System MQ
Galvanizing: Hot-dip galvanized 55 µm
Medium duty
System MQ
12
HDG
140
60 x 13 D D
12
140 12 C C
140 60 x 13 D D
60 x 13 BD B D
C C
C 12 C 12
B B
140 B 140 B
Stainless Steel
12 12
Medium duty
12
System MQ
140 12 140
140 MI-120
B 140
300
MI-120
MI-90 B 150 155 MI-120
150
155
B 300 220
300 MI-90 220
14
14 150 155 150
MI-90 150 155
MI-90 MI-90
60 x 13 150 155 220 60 x 13 155 220
100 220 14 220
MI-90 14 14
1460 x 13 60 x 13
100 60 x 13 60 x 13
System MI
100
HDG
Note: Note: +
Always to be supported at opposite end. Designed for cantilever applications. May be supported at only one end.
Note: Note: +
Note:
Alwaysto be supported at opposite end. Note: +for
Designed cantilever applications. May be supported at only one end.
Always to be supported at opposite end. Designed for cantilever applications. May be supported at only one end.
Fixed points
System MQ
and sliders
2x
Airconditioning
and Ventilation
System MQ
2x
2x
Firestop systems
page 16
page 154
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti MI industrial pipe support
support system
system System MI - Industrial Pipe and Electrical Support
MI concrete connectors:
and Technical
Connection to concrete
PC Software
Information
Advantages
■ Four elongated holes for easy wall mounting.
mounting.
■ Designed for ceiling, wall and floor mounting.
mounting.
Medium duty
System MM
Light duty
Technical data
Material: S235 JRG2
JRG2 as
as per
per DIN
DIN EN
EN 10
10 025
025
Medium duty
Galvanizing: Hot-dip galvanized
galvanized 55
55 µm
µm
System MQ
Concrete connector with connecting
connecting parts
parts
For
For girder
girder type
type Weight
Weight per
per Ordering
Orderingdesignation
designation Item
Itemno
no Package
Package
100
Medium duty
100
System MQ
230
230 230
230
156 156
HDG
156 156
12 15
15 15
15
12
140
140
140
140
MI-90
MI-90
140 200
140
Stainless Steel
200
Medium duty
156
System MQ
156
156 156
MI-90
MI-90 230
230
230
230
47 47
47xx17
47xx17
17 17
System MI
Note:
Note:
Note: ++
Note:
HDG
Always
Always to
to be
be supported
supported at
at opposite
opposite end.
end. Designed
Designed for
for cantilever
cantilever applications.
applications.May
Maybe
besupported
supportedat
atonly
onlyone
oneend.
end.
Items
Set in
in set
Set besteht
Items set aus:
besteht aus:
2x
Fixed points
2x
System MQ
and sliders
2x
2x
Airconditioning
and Ventilation
System MQ
Firestop systems
page 18
page 18
page 155
*Availability of other sizes need to be checked with local Hilti organization
System MI - Industrial Pipe and Electrical Support
page 156
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti
Hilti MI
MI industrial
industrial pipe
pipe support
support system
system System MI - Industrial Pipe and Electrical Support
MI concrete
concrete connectors:
connectors:
Connection
Connection to
to concrete
concrete walls
and Technical
walls
PC Software
Information
Advantages
Advantages
■ Lighter
Lighter version
version for
forstructures
structuressupported
supportedatatboth
bothends.
ends.
■ Elongated
■ Elongated holes
holes for
foreasier
easierpositioning.
positioning.
■ Simple
■ Simple support
support for
forinstallation
installationbetween
betweentwo
twowalls.
walls.
Medium duty
System MM
Light duty
Technical
Technical data
data
Material:
Material: S235
S235JRG2
JRG2as asper
perDIN
DINEN
EN10
10025
025
Galvanizing: Hot-dip galvanized 55 µm
Medium duty
Galvanizing: Hot-dip galvanized 55 µm
System MQ
Package:
Package:
Note
Note
Always
Always to
to be
be supported
supportedat
atopposite
oppositeend.
end.
2x
2x
Medium duty
MI-90 2.29 MIC-C90-U 304826 2
System MQ
100
HDG
100
25 x 14
25 x 14
Items in set aus:
Set besteht
Items in set aus:
Set besteht
1x
1x
Stainless Steel
Medium duty
System MQ
1x
1x
System MI
HDG
Fixed points
System MQ
and sliders
Airconditioning
and Ventilation
System MQ
Firestop systems
page 20
page 20 page 157
System MI - Industrial Pipe and Electrical Support
page 158
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
page 159
System MI - Industrial Pipe and Electrical Support
page 160
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti
Hilti MI
MI industrial
industrial pipe
pipe support
support system
system System MI - Industrial Pipe and Electrical Support
MI pipe
pipe clamps:
clamps:
FyF
– Fz
– Fz – Fz– Fz
– Fz– Fz
and Technical
Pipe supports
supports for
for insulated
insulated pipes
y
pipes
PC Software
L1 L L1 L
Information
1 1
s s Fy F Fy F
y y
Da D Da D
DaD s s a a
a s s
Advantages
Advantages B B
B B B B
■ With mounting
mounting holes
holesfor
forinstalling
installinglight-duty
light-dutyfixed
fixedpoints.
points.
H H
■ FxF H H H
Fx F H
x x Fx F
F F F F x F F
1313 13 13 L 13 13 L
L L W W L
WW W L
W + Fz
+ Fz
+ F+z F + Fz
z
Medium duty
+ Fz
System MM
Light duty
11ring
ring/ 1/ 1rib
rib 2 2rings
rings/ 1/ 1ribrib Heavy-duty
Heavy-dutyversion
version
for
forDN25-DN150
DN25-DN150 forforDN25-DN300
DN25-DN300 forfor
DN200-DN600
DN200-DN600
7575
55
Medium duty
System MQ
8
8
Technical
Technical data
data for
for the
theclamping
clampingsystem
system
Material:
Material: S235
S235JRG2
JRG2asasper
perDIN
DINEN
EN10025
10025
Galvanizing:
Galvanizing: Hot-dip galvanized 70 µm
Hot-dip galvanized 70 µm
Temperatures: Up
Upto
to300
300°C Low-friction
Temperatures: °C Low-frictionplate
plate Sliding
Slidingsupport
supportclamps
clamps Fixed point
Fixed point
Medium duty
System MQ
50 60.3 40 6 9 80 85 250 – M12 3.2 0.9 1.8 0.6 0.6 MI-PS1/1 50-85 304846 2
50 60.3 40 6 9 80 85 250 – M12 3.2 0.9 1.8 0.6 0.6 MI-PS1/1 50-85 304846 2
50 60.3 40 6 8 82 140 250 – M12 2.7 0.9 1.8 0.6 0.6 MI-PS1/1
MI-PS1/150-140 286959 2
HDG
50 60.3 40 6 8 82 140 250 – M12 2.7 0.9 1.8 0.6 0.6 50-140 286959 2
65 76.1 40 6 9 80 85 250 – M12 3.3 1.1 2.1 0.7 0.7 MI-PS1/1 65-85 304847 2
65
65
76.1
76.1
40
40 6
6 8
9 80
82 140
85 250
250 –
– M12
M12
3.3
2.8
1.1
1.1
2.1
2.1
0.7
0.7
0.7
0.7
MI-PS1/1 65-85
MI-PS1/1 65-140
304847
286960 2
2
65
80 76.1
88.9 40
40 66 98 82
80 140
85 250
250 –– M12
M12 2.8
3.3 1.1
1.2 2.1
2.3 0.7
0.8 0.7
0.8 MI-PS1/180-85
MI-PS1/1 65-140 286960
304848 22
80
80 88.9
88.9 40
40 66 89 80
82 14085 250
250 –– M12
M12 3.3
2.9 1.2
1.2 2.3
2.3 0.8
0.8 0.8
0.8
MI-PS1/1 80-85
MI-PS1/1 80-140 304848
286961 22
80
100 88.9
114.3 40
40 86 98 82
80 140
85 250
250 –– M12
M12 2.9
3.8 1.2
2.5 2.3
5.0 0.8
1.7 0.8
1.7 MI-PS1/1100-85
MI-PS1/1 80-140 286961
304849 22
100 114.3 40 88 89 80 85 250 –– M12 3.8 2.5 5.0 1.7 1.7 MI-PS1/1100-140
MI-PS1/1 100-85 304849 22
Stainless Steel
100 114.3 40 80 140 250 M12 3.4 2.5 5.0 1.7 1.7 286962
Medium duty
System MQ
100
125 114.3
139.7 40
40 88 98 80
80 140
85 250
250 –– M12
M12 3.4
4.0 2.5
2.9 5.0
5.8 1.7
1.9 1.7
1.9 MI-PS1/1125-85
MI-PS1/1 100-140 286962
304850 22
125
125 139.7
139.7 40
40 88 89 80
80 14085 250
250 –– M12
M12 4.0
3.6 2.9
2.9 5.8
5.8 1.9
1.9 1.9
1.9 MI-PS1/1125-140
MI-PS1/1 125-85 304850
286963 22
125
150 139.7
168.3 40
40 88 98 80
80 140
85 250
250 –– M12
M12 3.6
4.2 2.9
3.2 5.8
6.4 1.9
2.1 1.9
2.1 MI-PS1/1150-85
MI-PS1/1 125-140 286963
304851 22
150
150 168.3
168.3 40
40 88 89 80
80 14085 250
250 –– M12
M12 4.2
3.8 3.2
3.2 6.4
6.4 2.1
2.1 2.1
2.1 MI-PS1/1150-140
MI-PS1/1 150-85 304851
286964 22
150 168.3 40 8 8 80 140 250 – M12 3.8 3.2 6.4 2.1 2.1 MI-PS1/1 150-140 286964 2
25 21.3 30 5 9 80 85 250 200 M10 3.3 0.8 1.5 0.5 0.5 MI-PS2/1 25-85 304852 2
25
25 21.3
21.3 30
30 55 99 80
80 14085 250
250 200
180 M10
M10 3.3
3.7 0.8
0.8 1.5
1.5 0.5
0.5 0.5
0.5 MI-PS2/125-140
MI-PS2/1 25-85 304852
286965 22
25
40 21.3
48.3 30
30 55 99 80
80 140
85 250
250 180
200 M10
M10 3.7
3.4 0.8
1.0 1.5
2.0 0.5
0.7 0.5
0.7 MI-PS2/140-85
MI-PS2/1 25-140 286965
304853 22
System MI
40
40 48.3
48.3 30
30 55 99 80
80 14085 250
250 200
180 M10
M10 3.4
3.8 1.0
1.0 2.0
2.0 0.7
0.7 0.7
0.7 MI-PS2/140-140
MI-PS2/1 40-85 304853
286966 22
40 48.3 30 65 99 80 140 250 180 M10 3.8 1.0 2.0 0.7 0.7 MI-PS2/150-85
40-140 286966 22
HDG
50 60.3 40 80 85 250 190 M12 4.1 1.8 3.5 1.2 1.2 MI-PS2/1 304854
50
50 60.3
60.3 40
40 66 99 80
80 14085 250
250 190
180 M12
M12 4.1
4.5 1.8
1.8 3.5
3.5 1.2
1.2 1.2
1.2 MI-PS2/150-140
MI-PS2/1 50-85 304854
286967 22
50
65 60.3
76.1 40
40 66 99 80
80 140
85 250
250 180
190 M12
M12 4.5
4.3 1.8
2.1 3.5
4.2 1.2
1.4 1.2
1.4 MI-PS2/165-85
MI-PS2/1 50-140 286967
304855 22
65
65 76.1
76.1 40
40 66 99 80
80 14085 250
250 190
180 M12
M12 4.3
4.7 2.1
2.1 4.2
4.2 1.4
1.4 1.4
1.4 MI-PS2/165-140
MI-PS2/1 65-85 304855
286968 22
65
80 76.1
88.9 40
40 66 99 80
80 140
85 250
250 180
190 M12
M12 4.7
4.4 2.1
2.4 4.2
4.7 1.4
1.6 1.4
1.6 MI-PS2/180-85
MI-PS2/1 65-140 286968
304856 22
80
80 88.9
88.9 40
40 66 99 80
80 14085 250
250 190
180 M12
M12 4.4
4.8 2.4
2.4 4.7
4.7 1.6
1.6 1.6
1.6 MI-PS2/180-140
MI-PS2/1 80-85 304856
286969 22
80 88.9 40 86 99 80 140 250 180 M12 4.8 2.4 4.7 1.6 1.6 MI-PS2/1100-85
80-140 286969 22
Fixed points
MI-PS2/1
System MQ
100 114.3 40 80 85 250 190 M12 5.3 3.0 6.0 2.0 2.0 304857
and sliders
100
100 114.3
114.3 40
40 88 99 80
80 14085 250
250 190
180 M12
M12 5.3
5.8 3.0
3.0 6.0
6.0 2.0
2.0 2.0
2.0 MI-PS2/1100-140
MI-PS2/1 100-85 304857
286970 22
100
125 114.3
139.7 40
40 88 99 80
80 140
85 250
250 180
190 M12
M12 5.8
5.7 3.0
3.5 6.0
7.0 2.0
2.3 2.0
2.3 MI-PS2/1125-85
MI-PS2/1 100-140 286970
304858 12
125
125 139.7
139.7 40
40 88 99 80
80 14085 250
250 190
180 M12
M12 5.7
6.1 3.5
3.5 7.0
7.0 2.3
2.3 2.3
2.3 MI-PS2/1125-140
MI-PS2/1 125-85 304858
286971 11
125
150 139.7
168.3 40
40 88 99 80
80 140
85 250
250 180
190 M12
M12 6.1
6.1 3.5
4.0 7.0
8.0 2.3
2.7 2.3
2.7 MI-PS2/1150-85
MI-PS2/1 125-140 286971
304859 11
150 168.3
168.3 40
40 88 99 80
80 14085 250
250 190
180 M12
M12 6.1
6.6 4.0
4.0 8.0
8.0 2.7
2.7 2.7
2.7 MI-PS2/1150-140
MI-PS2/1 150-85 304859
286972 11
150
200 168.3
219.1 40
50 88 99 80
100 140
107 250
250 180
180 M12
M16 6.6
8.5 4.0
4.8 8.0
9.5 2.7
3.2 2.7
3.2 MI-PS2/1200-107
MI-PS2/1 150-140 286972
304860 11
200 219.1 50 88 99 100 107 250 180 M16 8.5 4.8 9.5 3.2 3.2 MI-PS2/1200-142
200-107 304860 11
Airconditioning
and Ventilation
219.1 50 100 142 250 180 M16 8.9 4.8 9.5 3.2 3.2 MI-PS2/1 286973
System MQ
200
250 219.1
273.0 50
50 88 99 100
100 142
107 250
250 180
180 M16
M16 8.9
9.5 4.8
5.3 9.5
10.5 3.2
3.5 3.2
3.5 MI-PS2/1250-107
MI-PS2/1 200-142 286973
304861 11
250 273.0
273.0 50
50 88 99 100
100 107
142 250
250 180
180 M16
M16 9.5
9.9 5.3
5.3 10.5
10.5 3.5
3.5 3.5
3.5 MI-PS2/1250-142
MI-PS2/1 250-107 304861
286974 11
250
300 273.0
323.9 50
50 88 99 100
100 142
107 250
250 180
180 M16
M16 9.9
10.5 5.3
5.8 10.5
11.5 3.5
3.8 3.5
3.8 MI-PS2/1300-107
MI-PS2/1 250-142 286974
304862 11
300 323.9
323.9 50
50 88 99 100
100 107
142 250
250 180
180 M16
M16 10.5
10.9 5.8
5.8 11.5
11.5 3.8
3.8 3.8
3.8 MI-PS2/1300-142
MI-PS2/1 300-107 304862
286975 11
300 323.9 50 8 9 100 142 250 180 M16 10.9 5.8 11.5 3.8 3.8 MI-PS2/1 300-142 286975 1
* The maximum permissible loads for connecting components must be taken into account when the pipe support is used!
Firestop systems
* The maximum permissible loads for connecting components must be taken into account when the pipe support is used!
page 26
page 161
page 26
System
Hilti MIMI
Hilti MI - Industrial
industrial
industrial pipePipe
pipe and Electrical
support
support system
system
system Support
MI accessories:
accessories:
and Technical
Individual
Individual connecting
connectingparts
PC Software
parts
Information
Advantages
Advantages
■ Parts
■ Parts designed
designedfor
foreasy
easyassembly
assemblywith
withone
onehand
hand(shaped
(shapedto
(shaped prevent
totoprevent
prevent
rotation).
rotation).
■ “Easy
■ hand”plate
“Easy hand” plate(5)
(5)for
foreasy
easysingle-handed
single-handedadjustment
adjustmentof
adjustment ofof
the
the connection.
connection.
Medium duty
System MM
Light duty
Technical
Technical data
data
Material:
Material: EN-GJMW-400-5
EN-GJMW-400-5asasperperDIN
DINEN
ENEN1562
1562
1562
Medium duty
System MQ
Weight
Weight per Ordering
Ordering designation Item
Itemno. Packege 36,6 36,6
36,6 36,6
For girder type per designation no. Packege
36,6 36,6
For girder type Weight
set
set [kg] per
[kg] Ordering designation Item no. Packege
contents
contents
Hilti Pipe Rings
Examples of applications (cantilever)
(cantilever)
Examples of applications (cantilever)
Stainless Steel
Medium duty
System MQ
Assembly procedure 95
Assembly procedure 95
95
11 22 127
127
1 2 M12 127
M12
2.
2. M12
2.
M12
M12
M12
2-3x
System MI
2-3x
HDG
12,2
12,2xx12,2
1.
1. 72
72
12,2
12,2 x 12,2
1. 72
77
7
Fixed points
System MQ
and sliders
36,6
36,6 36,6
36,6
50 36,6 36,6
50
33 44 50
3 4
1.
1.
Airconditioning
and Ventilation
2.
System MQ
1. 2.
2.
Firestop systems
page 32
page 32
page 162
page 32
17
90.4
90.4
17
90.4
120.4
page 163
System MI - Industrial Pipe and Electrical Support
Hilti
BeamMI-SGC
clamp forM12
various flange
thicknesses
Beam clamp for various flange
thicknesses
Advantages
■ For steel beams with flange thicknesses from 3 to 36 mm and angle
Medium duty
System MM
Advantages
of up to 15°
Light duty
Corrosion
■■ For protection
steel beams of steelthicknesses
with flange beam is notfrom
damaged
3 to 36bymm
beam
andclamp
angle
Beam
■ of up toclamp
15° is equipped with self-locking nut
■ Corrosion protection of steel beam is not damaged by beam clamp
■ Beam clamp is equipped with self-locking nut
2x 2x
2x 2x
Medium duty
System MQ
Technical data
Material:
1x 1x EN-GJMW-400-5 as per DIN EN 1562
Technical data
Galvanizing: Hot-dip galvanized 55 µm
Screw:
Material:
1x 1x EN-GJMW-400-5 as perM12,
DIN 8.8
EN 1562
grade
Galvanizing: Hot-dip galvanized 55 µm
Hilti Pipe Rings
30
Items in set :
M12
30
30
Items in set :
M12
M12
System MI
HDG
1x
1x
Fixed points
System MQ
and sliders
1x
Airconditioning
and Ventilation
1x
System MQ
1x 1x
1x 1x
1x 1x
1x
1x
1x 1x 1x
1x 1x
Firestop systems
1x
1x
page 164
page 34
1x 1x
page 34
34
1x
1x
page 1x
1x
SystemHilti
MI -MI
Industrial Pipe
industrial andsupport
pipe Electricalsystem
Support
Hilti MI-DGC
and Technical
PC Software
Information
Beam clamp for direct connection
of MI girder to steel beam
Advantages
■ For steel beams with flange thicknesses from 3 to 36 mm and angle
Medium duty
of up to 15°
System MM
Light duty
■ Corrosion protection of steel beam is not damaged by beam clamp
■ Beam clamp is equipped with self-locking nuts
Technical data
Material: EN-GJMW-400-5 as per DIN EN 1562
Medium duty
System MQ
Galvanizing: Hot-dip galvanized 55 µm
U-bolt: M12, 8.8 grade
Medium duty
System MQ
MI beam clamp for direct connection
HDG
of MI girder to steel beam
For girder type Weight per set [kg] Package contents Ordering designation Item no.
MI-90 3.41 4 MI-DGC 90 233860
MI-120 3.65 4 MI-DGC 120 233861 131
Stainless Steel
Medium duty
System MQ
Items in set :
2x 2x
2x 2x
System MI
HDG
1x 1x
1x 1x Fixed points
System MQ
and sliders
Items in set :
2x 2x
2x 2x
Airconditioning
and Ventilation
System MQ
1x 1x
1x 1x
Firestop systems
page
page165
35
System MI - Industrial Pipe and Electrical Support
page 166
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Hilti MI industrial pipe support system 1x 1x System MI - Industrial Pipe and Electrical Support
1x 1x
Hilti MIC-TRC
and Technical
PC Software
Information
2x Connector for threaded rod
2x 2x
2x
Advantages 2x
■ Easy to install – single-handed installation!
■ Opposite side of MI girder still usable for other applications
Medium duty
1x■ Connector can be used on top or bottom of MI girder
System MM
Light duty
■ With MI-90–30 mm height adjustability (with MI-120 –15 mm)
1x
■ MQ channel fits between MIC-TRC and MI girder
1x
1x 1x
Medium duty
System MQ
2x
Technical data
Material: S235JRG2 as per DIN EN 10025
Galvanizing: Hot-dip galvanized 55 µm
Connecting screws: M12 (connection to MI girder)
Medium duty
System MQ
HDG
Items in set :
1x
1x
75
1x 1x
Stainless Steel
Medium duty
System MQ
1x
1x
1x1x 1x
1x 1x 1x
1x
System MI
Items in set :
HDG
1x
1x 1x
1x 1x 1x 1x
Fixed points
System MQ
1x
and sliders
1x 1x 1x 1x
1x 1x
1x1x 1x 1x 1x1x 1x
1x 1x 1x 1x
1x
Airconditioning
and Ventilation
Items in set :
System MQ
1x
Firestop systems
1x 1x
1x 1x
1x
MI Rigid connector
and Technical
MIC-90-U-ED
PC Software
Information
Advantages
nn Flexibility to compensate tolerances in the dimension of
the building through use of connectors with “telescopic”
charectistics.
Medium duty
System MM
Light duty
System MQ
Firestop systems
page 168
Fixed points and sliders.
Description Pages
page 171
Fixed
Fixed points
points and and sliders
sliders
Features
■ Verified loads and technical data.
■ Quick installation using only 2 screws on the pipe ring.
■ Narrow flange makes insulation easy.
■ Close spacing possible.
■ Baseplate with acoustic insulation may be used.
Medium duty
System MM
Light duty
11/4″ 42– 45 3
/4″ M10×45 40×6 110 45 20 1500* MFP-L NW32 310310
11/2″ 47– 50 3
/4″ M10×45 40×6 116 48 20 1500* MFP-L NW40 310311
2″ 57– 61 3
/4″ M10×45 40×6 130 53 20 1500* MFP-L NW50 310312
68– 72 3
/4″ M12×45 40×6 143 59 20 2000* MFP-L NW68/72 310313
21/2″ 75– 79 3
/4″ M12×45 40×6 150 64 20 2000* MFP-L NW65 310314
3″ 88– 90 3
/4″ M12×45 40×6 162 70 20 2000* MFP-L NW80 310315
4″ 108–115 3
/4″ M16×45 50×6 188 82 10 2000* MFP-L NW4″ 310316
5″ 133–140 3
/4″ M16×45 50×6 214 95 10 2000* MFP-L NW125 310317
Medium duty
System MQ
1/2", 3/4"
150mm
22
with the MFP-GP 1/2″, 3/4″ baseplate ∅ 13,5
F
and HST M12×20 (item no. 70755/4)
Baseplate 150
109
100
Stainless Steel
System MQ
Firestop systems
page 172
page 186
Fixedpoints
Fixed pointsand
andsliders
sliders
and Technical
PC Software
A quick and easy installation with
Information
hight versatility from a modular
design.
Medium duty
System MM
Light duty
Medium duty
System MQ
System features
HDG
A purely static working princi- Forces in the pipe are trans- Greater installation freedom nents, the MFP2 and MFP3
ple: The axial load is distributed ferred by friction to the pipe and simple fitting: To avoid braces can be pivoted out
in a triangle of forces, reliably ring (up to 10 kN). drilling into rebars when symmetrically. Additional side
transferring the forces into the fastening the bracing compo- bracing can also be installed.
Stainless Steel
Medium duty
System MQ
base material.
System MI
HDG
The pushbutton ensures stepless The brace shoe transfers Other, simple fitting arrange- Loads can be taken up in both
Fixed points
System MQ
and sliders
height adjustment, permitting resulting forces into the base ments can be used for smaller directions by providing bracing
non-problematic subsequent material. It is also suitable for loads due to the modular on both sides.
installation. use with the «MQ» channel design.
installation system.
Other features
Airconditioning
and Ventilation
■
■ Unproblematic installation by one workman ■ Very strong appearance
■ Economical and clear stockkeeping
Our technical advisory service is available to you for the design of fixed points.
page 173
page 187
Fixed
Fixed points
points and
and sliders
sliders
A
Technical Data Bracing shoe
H max. = 1200 mm M 16
Fastening A = suitable anchor M12 1 H MFP-BP 20
B = suitable anchor M16 1 B
AM 16
M 20
Medium duty
System MM
Direc
tion o
f forc
MFP pipe ring as per desired pipe size Frec
e
1 1/4"
MFP-BP 20
H
Technical Data
Recommended Load in direction of axial pipe Frec. 10 kN A
Support height until overside of pipe H min. = 140 mm
H max. = 1200 mm
MFP-BP 20
Fastening A = suitable anchor M12 1
C = suitable anchor M161 C
MFP-NW...
System MQ
and sliders
Technical Data
Recommended Load in direction of axial pipe Frec. 20 kN
Support height until overside of pipe H min. = 250 mm
H max. = 1200 mm
MFP-BP16
Fastening A = suitable anchor M12 1
Airconditioning
and Ventilation
Given loads only apply if Hilti HST anchors ate used. If the direction of force is not known, or changing, the fixed point must be braced
on both sides. If the force at the fixed point is greater than 10 kN, weld stops on the bracing side of the pipe.
1)
Given values apply only to use of HST anchors. For selection the suitable anchors, our technical support is available for you.
page 174
page 188
page 175
Fixed points and sliders
Features
■ For use suspended or standing without conversion.
■ Coordinated loading classes suitable for Hilti pipe rings.
■ Temperature resistant up to 300°C as no parts are of plastic.
■ Stiffened base plate suitable for MQ channel installation system.
System MM
Light duty
Technical Data
Material: ST 37
Surface: galvanised,13mm Smooth rolling on coated rollers. Large movement: MRG 2 up to 80 mm,
Rolling resistance: = 0.08 IBMB Nr. Coefficient of friction: µ 0 = 0.08 MRG-D6 up to 116 mm.
3897/1802-4 Center mark for setting to zero.
11,5 x 20
Medium duty
System MQ
13,5 x 20
MRG 4 roll connector MRG 4
Frec. 4.0 kN, sliding movement 120 mm
Connection boss / double thread overall Box Ordering Item no. 90
height (mm) contents designation
M12 / M16 39.2 5 MRG 4 243551
Medium duty
System MQ
e me 116
Frec. 8.0 kN, sliding movement 116 mm c
pla tion
dis c
x. efle
ma ax. d
m 159
Connection boss / double thread overall Box Ordering Item no.
height (mm) contents designation
M12 / M16 43.5 5 MRG-D6 334131
Stainless Steel
Medium duty
System MQ
219
90
13,5 x 20
13,5 x 20
System MQ
and sliders
200
max. displacement ± 23 mm
max. deflection 46 mm
44,5 60
240
Airconditioning
and Ventilation
contents designation
M12 M16 25 MRA M16 252105
M12 3
⁄4 " 25 MRA 3⁄4 " 252106
M12 1
⁄ 2" 25 MRA 1⁄ 2" 252107
M16 1
⁄ 2" 25 MRA 1⁄ 2" M16 338992
M16 3
⁄4 " 25 MRA 3⁄4 " M16 338993
page 176
page 190
Fixed points and sliders
Fixed points and sliders
and Technical
PC Software
Information
Benefits
■ Suitable for installation on ceilings or floors
■ Designet for use with Hilti pipe ring programme
■ Resistant to temperatures up to 130° C
■ Small height
■ Slide cannot pull out
Medium duty
System MM
Light duty
Delivery without nut, screw or washer.
Technical Data
Material: ST 37 Built-in plastic slide with a A version for a single connection
Surface: galvanised,13mm smooth movement because no with centering indicator and
Rolling resistance: =0.18
0.08 angulation is possible installation marking for simple,
Coefficient of friction: µo 0,18 easy and quick installation
Medium duty
System MQ
MSG 1.0 slide connector with single connection 11,5 x 20
Frec 1.0 kN, slide movement = 80 mm
Connection boss overal height Box Ordering Item no.
double thread (mm) contents designation 80
M8 / M10 27 10 MSG 1.0 M8 / M10 248205
Medium duty
Connection boss overal height Box Ordering Item no.
System MQ
double thread (mm) contents designation
HDG
M8 / M10 27 10 MSG 1.75 M8 / M10 248209
M12 / M16 35 10 MSG 1.75 M12 / M16 248210
m
7m
±4
m ent mm
e 94
lac
isp ion
Stainless Steel
x. d ect
ma . defl
Medium duty
System MQ
x
ma
120
172
System MI
HDG
MSG-1.75 M UK Cross slider element 11,5 x 17
and sliders
50
System MQ
28
220
Firestop systems
page 177
page 191
Notes
A breath of fresh air for the
mechanical installation trade.
Hilti. Outperform. Outlast.
Air-conditioning and ventilation
Description Pages
page 181
Air-conditioning and ventilation
page 182
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
suspended and in vertical shafts
The exceptional fastening system for rectangular air ducts,
System
Air-conditioning
ML channel
page
page 201
andinstallation
183
ventilation
page 184
page 202
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
page 185
Air-conditioning and ventilation
page 186
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Sound absorber for tensile loads
System
Air-conditioning
ML channel
page
page 209
andinstallation
187
ventilation
188
page 210
page
PC Software System MM System MQ System MQ System MQ System MQ
and Technical Light duty System MQ Medium duty Medium duty System MI Fixed points Airconditioning
Information Medium duty Medium duty Hilti Pipe Rings HDG Stainless Steel HDG and sliders and Ventilation Firestop systems
Firestop Systems
Tested and
Picture Product Description Application Benefits approved
and Technical
PC Software
according to
Information
System MM
• acoustically tested
Light duty
A sprayable fire- • top of wall joints • maximum movement capability UL, FM, BS,
Hilti Pipe Rings
CSF-SP WB rated mastic for • curtain wall/ edge of • can be used with many standard OPL, EN, DIN
Firestop joint spray construction joints slab sprayers
where maximum • expansion joints • water based formulation
movement is • fast and easy clean up with water
required. • resists cracking after installation
• age tested up to 30 years
• tested by recognized clad ding
testing facilities
Medium duty
System MQ
HDG
High expansion • single cables and • wide range of applications BS, AS, DIN,
intumescent mastic cable bunches • paintable EN
CP 611A Intumes- • fast and easy installation and clean up
for • plastic pipes up to
cent firestop • particularly suitable for the laying new cables
penetrations giving 2” (50 mm) with out
mastic • can be used for outdoor applications
up to 4 hours additional collar
protection • metal pipes up to 6” • silicone free
• expansion pressure up to 7 bars
Stainless Steel
(160mm)
Medium duty
System MQ
Intumescent fire • plastic pipes up to 3” • one product for most applications UL, FM
FS-ONE protection for without additional collar • cost effective solutions
High penetrations giving • single cable and cable • fast and easy installation
performance up to 4 hours bunches • can be repenetrated when laying
System MI
cement-based mor- penetrations • the mortar can be mixed to a stiff AS, UL, EN
CP 636
tar with thermal • single cable, cable consistency, but form work may
Firestop mortar
insulating proper- bunches and cable be required for large penetrations
ties for firestopping trays • paintable
a wide variety of • HVAC penetrations • Age tested upto 30 years
applications • metal pipes
Airconditioning
and Ventilation
System MQ
applications • HVAC penetrations • suitable for light foot traffic (CP 637)
with dampers
page 190
Firestop Systems
Tested and
Picture Product Description Application Benefits approved
and Technical
PC Software
according to
Information
Ready-to-use • plastic pipes with • ready-to-use BS, UL,
CP 643N quickly installed, diameters from 1” (32 • latch mechanism for quick and AS DIN, FM,
Firestop collar galvanized sheet mm) up to 6” (160mm) easy closure without use of a tool EN
steel jacket contain- • flexible tab positioning for
ing sections convenient fastening
of intumescent • allows for correct installation in
material tight areas
Medium duty
System MM
• good acoustic insulation
Light duty
• age tested up to 30 years
Ready-to-use, • plastic pipes from 1.5” • wide range of approvals BS, UL,
CP 644 quickly installed, (50 mm) up to 10” • ready-to-use AS DIN, EN
Firestop collar with snap connec- (250 mm) • snap connection for quick and
tion, steel jacket easy closure without use of a tool
Medium duty
System MQ
containing sections • flexible tab positioning for
of intumescent convenient fastening
material • good acoustic insulation
• age tested up to 30 years
2.1 Simple one step • concrete and metal • one-step firestop solution for UL
Medium duty
System MQ
HDG
One step firestop- • metal and plastic pipes • one step installation BS, UL,
CP 680 ping of pipes for from 1” (32 mm) up to • no additional caulking AS FM
Cast-in Firestop protection up to 3 6” (170 mm) • ready-to-use
device hours • easy to remove and replace pipe
• allows for pipe adjustments
Stainless Steel
during installation
Medium duty
System MQ
• economical in use owing to short
installation time
• smoke and water tight
• excellent sound insulation
Precut • plastic pipes from • simple to use and easy to cut BS, UL, FM
intumescent graph- 2” (50 mm) up to • easy to fasten on place EN, DIN
CP 648S ite strip 6” (160 mm) • long term stability of installation
Firestop wrap Strip • little space required – ideal where
System MI
pipes run close together
HDG
• ideal for very tight installations
• long length avoids waste
• quick and easy closure without
the use of a tool Fixed points
and sliders
installation
System MQ
page 191
Firestop Systems
Tested and
Picture Product Description Application Benefits approved
and Technical
PC Software
according to
Information
System MM
seal for a wide • single cable, cable • easy to use in poorly accessible UL, AS, FM,
CP 620 range of firestop bunches and cable openings EN
Firestop foam applications trays • correct installation through fast
• insulated and non- explanation in the opening
• impervious to smoke
insulated metal pipes
• paintable
• combustible pipes in • time saving through few working steps
conjunction with fire • no wastage
stop jackets or wraps • fully cured in 1 minute
• age tested up to 30 years
Medium duty
System MQ
solution for all • single cable, cable • easy to use in poorly accessible EN
CP 660 small to medium bunches and cable openings
Expanding fire seal sized of openings trays • 3 – phase technology
• insulated and non- • no formwork required
insulated metal pipes • impervious to smoke
• combustible pipes in • sound insulation tested
Stainless Steel
Medium duty
System MQ
System MQ
page 192
Hilti Lifetime Service
Hilti Lifetime Service is a service package that goes much further than all conventional warran-
ties. When you purchase a Hilti tool you automatically benefit from a comprehensive serrice
model that’s entirely unique in the business.