Documente Academic
Documente Profesional
Documente Cultură
Optimized integration: With more devices connected on the same Ethernet network than ever
before, an industrial managed switch can help you simplify your network
• Studio 5000® Add-on Profiles (AOPs)
enable premier integration into the
infrastructure. Adding a managed switch to your network architecture
Rockwell Automation Integrated can also help make the process of adding new machines easier.
Architecture® system
The Allen-Bradley® Stratix 5700™ is a compact, scalable Layer 2 managed
• Predefined Logix tags for monitoring switch with embedded Cisco technology for use in applications with
and port control small isolated, to complex networks. With integration into Studio
5000 Automation Engineering and Design Environment™, you can
• FactoryTalk® View faceplates enable
status monitoring and alarming leverage FactoryTalk® View faceplates and Add-on Profiles for simplified
configuration and monitoring.
• Built-in Cisco® Internet Operating
System (IOS) helps provide secure By choosing a switch co-developed by Rockwell Automation and Cisco,
integration with enterprise network your Operations Technology (OT) and Information Technology (IT)
professionals leverage tools and technology that are familiar to them.
This collaboration can also help to reduce configuration time and cost.
Designed and Developed for EtherNet/IP Automation Applications
Network Address Translation
Machine integration onto a plant network architecture can be difficult as machine builder IP-address assignments rarely
match the addresses of the end-user network. Also, network IP addresses are often unknown until the machine is being installed.
The Stratix 5700 with Network Address Translation (NAT) is a Layer 2 implementation that provides “wire speed” 1:1
translations ideal for automation applications where performance is critical.
SOURCE
SOURCE
HIGH SPEED
IN
IN
24VDC
24VDC
HIGH SPEED
SINK\
INPUT
SINK\
INPUT
DC
DC
COUNTER
COUNTER
8 9 10 11 12 13 14 15 A1 B1 Z1 8 9 10 11 12 13 14 15 A1 B1 Z1
OUT
OUT
SOURCE
OUTPUT
SOURCE
OUTPUT
24VDC
0 2 FUSE
24VDC
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 2 FUSE
DC
DC
8 9 10 11 12 13 14 15 1 3 OK 8 9 10 11 12 13 14 15 1 3 OK
192.168.1.2 192.168.1.2
05 13 Z1+ Z1- 05 13 Z1+ Z1-
with NAT
06 14 +V -V 06 14 +V -V
with NAT
07 15 OUT OUT 07 15 OUT OUT
0 2 0 2
COM COM OUT OUT COM COM OUT OUT
0 1 1 3 0 1 1 3
2 2 2 2 2 2 2 2
1 1 1 1 1 1 1 1
D+ D+ D+ D+ D+ D+ D+ D+
D- -
D- -
D- -
D- -
D- -
D- -
D- -
D- -
+ + + + + + + +
MBRK MBRK MBRK MBRK MBRK MBRK MBRK MBRK
MACHINE 1 MACHINE 2
Private Network Private Network
192.168.1.x 192.168.1.x
Configuration Table
IN2 IN2
Ref Ref
IN1 IN1
Enet LINK
FAULT
HERTZ
5 192.168.1.105
Esc Sel
Point I/O
MOD
192.168.1.105 Powerflex
DLR connectivity, which allows the 192.168.1.102
CHO CHO
DCHO DCHO
Net Net Net Net
OK OK 115 VAC RELAY
5500S2 5500S2 5500S2 5500S2
1 1 1 1
CompactLogix
D- -
D- -
D- -
D- -
+ + + +
MBRK MBRK MBRK MBRK
Static IP Address
the ring, and be the single place Kinetix
192.168.1.103
to manage machine-level network
diagnostics and DLR status. With redundant gateway capabilities, the Stratix 5700 can support two switches
on a single ring while being directly connected to the rest of the network helping to provide increased resiliency.
The switch also offers DHCP IP address assignment to end devices on the DLR network for simplified device replacement.
Switch Reference Chart
Allen-Bradley Stratix 5700 Industrial Ethernet Switch
Publication ENET-PP005F-EN-E –April 2016 Copyright ©2016 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Supersedes Publication ENET-PP005E-EN-E – March 2015